Database Info

[HOW TO] Debranding /Installing different/recovering bricked firmware on your Defy

Disclaimer: I will not be held responsible for any damage to your phone, your PC or indeed your life from following this guide. The steps in this guide worked for me. If you have problems uninstall everything and start from Step 4 again. Doing this kind of thing could affect your warranty and all that so have a long hard think about it before you go ahead
US Owners - If you flash the UK firmware, you will lose 3g and wifi calling app etc... There are fixes for this problem that can be found on other Forums. A guide on how to restore this which has worked for others is HERE
##WARNING: be careful when flashing 2.51 firmware, firstly its patched so root isn't achievable by the usual methods, and isn't easy to downgrade back to other firmware - I suggest you search and read the various topics on it. My advice is to use 2.21 UK or 2.34 Deblur firmware##
This guide will show you how to debrand your Motorola Defy (Eg bought on T-Mobile UK and want generic UK firmware), or indeed restore the phone if you brick (Eg removing important apps that you shouldn’t have touched!!)
Props go to jutley (Modaco)for his debranding guide for the flipout, and dkspook (Modaco) for his information in other threads, and anyone else who thinks they may have contributed, oh yeah and my Mum.
##Disconnect phone from PC##
STEP 1 Download usb drivers here below
Motorola Drivers Here
STEP 2 Download the debranded Firmware here (To debrand to generic UK I used the one marked UK - choose the one for your country)
Choose Firmware Here
STEP 3 Download RSDLite - I used v4.9, I found earlier versions would not work. Get it here.
RSDLite 4.9 Here
STEP 4 Install the USB Drivers and the RSDLite program and reboot PC
STEP 5 Extract the firmware file you downloaded a while ago. Then copy the .sbf firmware file to c:\Program files\Motorola\RSDLite folder (installation directory for RDSLite). this should come out as JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_S
rvice1FF.sbf for the UK one.
STEP 6 Start the RSDLite program now where it says filename press the select button and find the .sbf firmware file in c:\Program files\Motorola\RSDLite (it should default to this folder) and select the (sbf) file some details will appear on the right hand side.
STEP 7 We now need to boot the phone into the bootloader (as above make sure the phone is disconnected from USB – not sure if matters tho!). Hold the volume up and then power the phone on, after about 5 seconds release the buttons and the bootloader should display - it will show the version and a battery check. Now plug in the USB cable and it should install the drivers . Once the driver installation has finished you should see the phone appear at the bottom of the RSDLite program window under `port 1` - Once this is there you are ready to flash the firmware. NB: I had issues getting it to show a number of times. Uninstalling RSDLite/Drivers, rebooting PC, and then reinstalling these resolved this issue.
STEP 8 Press the start button on the RSDLite and just relax while your device gets flashed,debranded etc. you will see a progress status on the right hand side wait till it reaches 100% but please do not disconect it will reboot the phone automaticly and restart the phone.And just wait untill android comes up and fully running untill you disconnect it should read (PLEASE START PHONE MANUALY) on RSDLite when this shows it is safe to unplug.
Hopefully now you will have a debranded/unbricked phone.
One thing I noticed that was cool is that the data partition stayed intact for me when I debranded, meaning all my settings and installed app (providing you hadn’t moved stuff to /system) were still there after the process – cool! The only thing you will have to do is re-root the device.
Hope you find this useful and I look forward to a great community for the Defy!

Nice job! This worked perfectly. We now just need the tmo us FW. I'm kind of iffy about messing with my phone much more until I have a failsafe.

nitewalkergr said:
Nice job! This worked perfectly. We now just need the tmo us FW. I'm kind of iffy about messing with my phone much more until I have a failsafe.
Click to expand...
Click to collapse
Whats the benefit of the T-Mobile US Firmware - some kind of extra functionality? If we could get it, we could flash by this method and flash back if we didn't like it anyways I suppose.
In theory this method is a failsafe tho because if you mess any thing up you can get back to a different firmware. I must say I personally would like to get my hands on the original T-Mobile UK .sbf, just in case I wanted to put it back to its original state for returns/repair, so if anyone has found it (I haven't yet) please let me know.

If a tmo us user flashes with the uk FW they lose 3g.
A tmo us or just generic us fw would give us the clean sweep option while keeping our 3g.

Can I use the Uk Firm for a Vodafone Spain Defy??

Higgsy said:
Whats the benefit of the T-Mobile US Firmware - some kind of extra functionality? If we could get it, we could flash by this method and flash back if we didn't like it anyways I suppose.
In theory this method is a failsafe tho because if you mess any thing up you can get back to a different firmware. I must say I personally would like to get my hands on the original T-Mobile UK .sbf, just in case I wanted to put it back to its original state for returns/repair, so if anyone has found it (I haven't yet) please let me know.
Click to expand...
Click to collapse
Hi Higgsy, long time no see! Guess its cos you sold your Hero/G2 Touch so you have no need to visit htcdevscene, Its dead there now a days lol. I just got my Defy from T-Mobile UK. I here your after the T-Mobile UK Defy firmware? and I havent rooted or touched the firmware on mine at all, all i've done is charged it up and used as my day to day phone. If you know of a way to pull the firmware from the phone i will gladly upload it for you, if its even possible?
P.s. still got my Hero/G2 Touch not sure if i wanna sell the lil work horse yet lol, what are they selling for these days?

pedrogamo said:
Can I use the Uk Firm for a Vodafone Spain Defy??
Click to expand...
Click to collapse
Yes, I have a simfree defy, and this is my versión. Same version for France, UK, Spain, etc

Cesar Pipes said:
Yes, I have a simfree defy, and this is my versión. Same version for France, UK, Spain, etc
Click to expand...
Click to collapse
Thanks!! I did it. Now my Defy is debranded. Bye Vodafone!

dj_destruction said:
Hi Higgsy, long time no see! Guess its cos you sold your Hero/G2 Touch so you have no need to visit htcdevscene, Its dead there now a days lol. I just got my Defy from T-Mobile UK. I here your after the T-Mobile UK Defy firmware? and I havent rooted or touched the firmware on mine at all, all i've done is charged it up and used as my day to day phone. If you know of a way to pull the firmware from the phone i will gladly upload it for you, if its even possible?
P.s. still got my Hero/G2 Touch not sure if i wanna sell the lil work horse yet lol, what are they selling for these days?
Click to expand...
Click to collapse
Now then DJD!
Na we need the .sbf file for it but it no biggy at the moment. Get it rooted mate - easiest way is to download z4root from the market - works a treat and roots in like 10 secs lol.
Stopped going on htcdevscene for a number of reasons, firstly i could never get on the site and secondly i felt the way it was run was very inconsistent.
Just sold my Hero - they are going for between 80-120 on ebay the top end is for brand new boxed. I have just sold mine to a mobile recycle place for £103. This phone is different gravy to the hero for sure.
Anyway mate look forward to seeing you around again

Thanks for this guide Higgsy, very easy to follow even for a noob like me.
I have now said goodbye to Vodafone's crap a mere 20 minutes after opening the box with my shiny new DEFY in that was delivered today.

milesg said:
Thanks for this guide Higgsy, very easy to follow even for a noob like me.
I have now said goodbye to Vodafone's crap a mere 20 minutes after opening the box with my shiny new DEFY in that was delivered today.
Click to expand...
Click to collapse
No probs - Gone be the dirty network custom apps and splash screens!!

Done too. Thank you.

EDIT: Just reflashed and then calibrated the compass. Seems to be working now. Sorry for the unnecessary message.
Ok, having taken the phone out since I got rid of the Vodafone stuff, I've discovered that the GPS is no longer working. I've got GPS Test on it and it only sees one satellite where before it saw a load. I'm going to reload the firmware now, but does anyone have any ideas?

Higgsy what are the benefits of rooting and flashing the generic unbranded software apart from getting rid of the t-mobile rubbish?

tim440 said:
EDIT: Just reflashed and then calibrated the compass. Seems to be working now. Sorry for the unnecessary message.
Ok, having taken the phone out since I got rid of the Vodafone stuff, I've discovered that the GPS is no longer working. I've got GPS Test on it and it only sees one satellite where before it saw a load. I'm going to reload the firmware now, but does anyone have any ideas?
Click to expand...
Click to collapse
Hmm strange My GPS is fine, locks on in like 5 secs, maybe try rebooting with GPS switched on, if you haven't already done so.
DJD,
No real benefits apart from getting rid of any tmobile crap, there isn't much bloatware in the tmobile uk build anyways. I just like generic lol. And as for rooting - please tell me that question is joke surely as a seasoned veteran you know what that is geezer

I know rooting opens up a world of goodies but there arent any goodies for this phone yet in the way of ROMS, at least thats what i can gather so far lol. Can it be over clocked and JITenabled yet? after rooting it of course, sorry im being lazy n not google-ing lol.
Plus for my totally blonde moment if i flash the generic uk firmware would it still mean i could get the over the air 2.2 update when it is released by motorola before t-mobile release their bloatware version?

dj_destruction said:
I know rooting opens up a world of goodies but there arent any goodies for this phone yet in the way of ROMS, at least thats what i can gather so far lol. Can it be over clocked and JITenabled yet? after rooting it of course, sorry im being lazy n not google-ing lol.
Plus for my totally blonde moment if i flash the generic uk firmware would it still mean i could get the over the air 2.2 update when it is released by motorola before t-mobile release their bloatware version?
Click to expand...
Click to collapse
JIT can be enabled - its not stable imo - I tried it before, gonna have a better look at it.
i would expect you will be able to get the generic 2.2 update, to be fair, I think we will be flashing roms by that time anyways
Anyway stop being a ***** and get it rooted

OI lol,
Just downloaded z4root will put it on my memory card n get root tomorrow me thinks.
p.s z4root is no longer on the market, found the z4root.apk in a thread on here tho luckily lol.

Ok, now I do have a problem. I've flashed the non-branded rom and very happy with it, but my in-call speaker has failed this morning. This seems to be a common problem with the Defy and I suspect it needs replacing or repairing, but I need to put back the branded rom to have the phone in warranty, don't I? How do I even begin to go about that?

tim440 said:
Ok, now I do have a problem. I've flashed the non-branded rom and very happy with it, but my in-call speaker has failed this morning. This seems to be a common problem with the Defy and I suspect it needs replacing or repairing, but I need to put back the branded rom to have the phone in warranty, don't I? How do I even begin to go about that?
Click to expand...
Click to collapse
You can't unless you can find the vodafone .sbf sorry mate it was mentioned at the top of the post.
They probably wouldn't know anyway, just deny all knowledge if they say anything.

[Q] Need LG Panther & Samsung Taylor Users' Help For Updates

So it seems like we'll need to fight over at the Microsoft forums if we're to try to stay up-to-date. I need you to contribute to my post over at msdn here: http://forums.create.msdn.com/forums/p/78753/476964.aspx#476964
Maybe if enough of us hit'em, we can get some kind of answer. Dev phones should have been the first to be updated.

Still no updates for Taylor.

It says in the forums that you linked to that there will be no updates for the Samsung Taylor phones.

the92playboy said:
It says in the forums that you linked to that there will be no updates for the Samsung Taylor phones.
Click to expand...
Click to collapse
Seems like there won't be and update for LG Panthers either.
Anyone wanna trade for an Android device?

Might be a newb question here but....
Did people have to pay for these developer phones? Or did MS just send them out to registered/respected developers?

I suppose, you can flash your phone with the Omnia 7/Quantum ROM at your own risk.
the92playboy said:
Might be a newb question here but....
Did people have to pay for these developer phones? Or did MS just send them out to registered/respected developers?
Click to expand...
Click to collapse
Yup, Microsoft just sent them out.

day2die said:
I suppose, you can flash your phone with the Omnia 7/Quantum ROM at your own risk.
I would like to give th Quantum ROM a try , but I do not know where to start. I am a Bell user in Canada so I think they have the Quantum. I used to flash old WM and Android Devices all the time, but WP7 is new to me. Anyone have a thread or no if anyone has sucessfully flashed a LG Panther to anything else? I can get into a bootloader, but it is probably just Microsofts bootloader.
Click to expand...
Click to collapse

NevinM said:
day2die said:
I suppose, you can flash your phone with the Omnia 7/Quantum ROM at your own risk.
I would like to give th Quantum ROM a try , but I do not know where to start. I am a Bell user in Canada so I think they have the Quantum. I used to flash old WM and Android Devices all the time, but WP7 is new to me. Anyone have a thread or no if anyone has sucessfully flashed a LG Panther to anything else? I can get into a bootloader, but it is probably just Microsofts bootloader.
Click to expand...
Click to collapse
Looks like it's really possible, because i succesfully connected to the phone using QXDM, and even downloaded NAND's image (it's raw, so for extracting page size required, because size in the partition table is relative to page size). Though may flash it, i think bootloader will work. But you probably can get bricked device. Unfortunally i have no enough time for explorations.
Click to expand...
Click to collapse

Useless guy said:
Looks like it's really possible, because i succesfully connected to the phone using QXDM, and even downloaded NAND's image (it's raw, so for extracting page size required, because size in the partition table is relative to page size). Though may flash it, i think bootloader will work. But you probably can get bricked device. Unfortunally i have no enough time for explorations.
Click to expand...
Click to collapse
I think flashing the unbranded Optimus 7 ROM would be the best bet for us. There is a registry key named "HasKeyboard" that's defaulted to 0 that we can change to 1. That might be the way to go. Also I'm wondering if we'd have to go the goldcard method to move over to a Quantum or Optimus rom.
The problem is I don't have another phone and there's no MTTY process to unbrick our phones so I'm a little hesitant to try.

fb401 said:
Useless guy said:
I think flashing the unbranded Optimus 7 ROM would be the best bet for us. There is a registry key named "HasKeyboard" that's defaulted to 0 that we can change to 1. That might be the way to go. Also I'm wondering if we'd have to go the goldcard method to move over to a Quantum or Optimus rom.
The problem is I don't have another phone and there's no MTTY process to unbrick our phones so I'm a little hesitant to try.
Click to expand...
Click to collapse
Goldcard isn't required. Only HTC devices require it.
I've dumped my ROM, so if bootloader will work (i hope), device can be easily flashed.
Is anyone wanna to try? QPST can flash certain partitions (looks like only dsp1 and efs are required for succesful update). Unfortunally i can't risk my phone, because i'm developing an application.
Click to expand...
Click to collapse

Not being rude, but are people complaining that a phone that they received for free is not getting the update and not being continued? If you never paid anything for it in the first place, what are you out then?

the92playboy said:
Not being rude, but are people complaining that a phone that they received for free is not getting the update and not being continued? If you never paid anything for it in the first place, what are you out then?
Click to expand...
Click to collapse
Not every got it free.

Me to...
I am not sure if it is worthwhile attempting a flash. The problem is we are all developers and having no device is probably not worth the risk. I have not flashed anything WP7 so I am pretty hesitant. Is this the link to flashing info you guys are considering?
http://forum.xda-developers.com/showthread.php?t=935605
In reading the other threads, there is no real confirmation on the Panther not getting updated. It is clear the the Taylor will not. I am curious if we are running the exact ROM that another device is? If so, ROM from those devices may work. I am trying to remember what the download name was (was it Pacific or something?). I deleted the file. If I still had it I would consider giving flashing a try. I wish Microsoft had not shut down the microsoft connect site for these phones. Any thoughts?

the92playboy said:
Not being rude, but are people complaining that a phone that they received for free is not getting the update and not being continued? If you never paid anything for it in the first place, what are you out then?
Click to expand...
Click to collapse
I got mine off of eBay due to it being the best keyboard phone out at the time (the Quantum is a joke), so it wasn't free for me. Once we get a HTC 7 Pro here that's compatible with AT&T's 3G bands, I'll switch over to that.

NevinM said:
I am not sure if it is worthwhile attempting a flash. The problem is we are all developers and having no device is probably not worth the risk. I have not flashed anything WP7 so I am pretty hesitant. Is this the link to flashing info you guys are considering?
http://forum.xda-developers.com/showthread.php?t=935605
In reading the other threads, there is no real confirmation on the Panther not getting updated. It is clear the the Taylor will not. I am curious if we are running the exact ROM that another device is? If so, ROM from those devices may work. I am trying to remember what the download name was (was it Pacific or something?). I deleted the file. If I still had it I would consider giving flashing a try. I wish Microsoft had not shut down the microsoft connect site for these phones. Any thoughts?
Click to expand...
Click to collapse
I was thinking more the Europe Open Optimus 7 rom here: http://forum.xda-developers.com/showthread.php?t=935578
Like you said, I can't be without a device so I'm really hesitant to try flashing

Well there is going to be a point where and update or feature will make our phones aka gw910 or Taylor completely useless as for development or testing, so this is something to consider.
Yeah connect has been down since a long time ago I have been struggling to find the FW file provided in the msdn/connect/internet forums, I’m guessing the only way now is to contact either a developer/evangelist/god/msdn who has that file available in storage, with the firmware we can create our own updated custom FW way easier than creating one from scratch and/or experiment with other FW like the optimus 7/Q.
And idea can we consider spoofing the gw910 to an optimus 7/Q .7004 using the registry editor? Making ZUNE update just the components needed.
also im willing to give it a go flashing mi gw910 UsellesGuy any info on how can i dump mi firmware. and posible explanation as in how to recover.I read the bootloader post before but is there anything else i need ?

dragoxt said:
Well there is going to be a point where and update or feature will make our phones aka gw910 or Taylor completely useless as for development or testing, so this is something to consider.
Yeah connect has been down since a long time ago I have been struggling to find the FW file provided in the msdn/connect/internet forums, I’m guessing the only way now is to contact either a developer/evangelist/god/msdn who has that file available in storage, with the firmware we can create our own updated custom FW way easier than creating one from scratch and/or experiment with other FW like the optimus 7/Q.
And idea can we consider spoofing the gw910 to an optimus 7/Q .7004 using the registry editor? Making ZUNE update just the components needed.
also im willing to give it a go flashing mi gw910 UsellesGuy any info on how can i dump mi firmware. and posible explanation as in how to recover.I read the bootloader post before but is there anything else i need ?
Click to expand...
Click to collapse
Microsoft delivers updates using binary patches, they apply only to concrete file version, else they will be broken (or updating will be failed).
Thank you, but i think better way is to wait a bit, until situation about updates will clear up. If update will be not received - i'll begin my work

Useless guy said:
Microsoft delivers updates using binary patches, they apply only to concrete file version, else they will be broken (or updating will be failed).
Thank you, but i think better way is to wait a bit, until situation about updates will clear up. If update will be not received - i'll begin my work
Click to expand...
Click to collapse
On twitter I've tired contacting @winphonesupport as far as our phones being updated. They replied: "Let us see if our team knows and we'll get back to you. ^EB"
I haven't gotten another answer back yet. I doubt I'll get one at all honestly.

quick question about updating a developer device
Hi
I'm a complete newby about wp7.
I've two Optimus 7 in my possession that seem to be developer devices.
Here the phones info:
OS Version: 6516Mainline
SW Version: LG-E900AT-00-V08d-ORG-UK-JUL-24-2010
HW Version: E
More info:
OS Version: 6516Mainline (buildlab).20100713-1228
Firmware revision number: 0.8.4.10
Hardware revision number: 0.1.5.0
Bootloader version: 1.4.1.0
Chip SOC version: 0.30.2.0
Now I've tried to update the firmware like in this post:
http://forum.xda-developers.com/showthread.php?t=935578
But it doesn't work (LGDP2 connect to phone start the update but give the error 1002)
Is there a way to flash these phones to be like normal phones? (I don't intent to develop on them) Or my hardware version is to old (prototype)
Thanks for the help

fb401 said:
I think flashing the unbranded Optimus 7 ROM would be the best bet for us. There is a registry key named "HasKeyboard" that's defaulted to 0 that we can change to 1. That might be the way to go. Also I'm wondering if we'd have to go the goldcard method to move over to a Quantum or Optimus rom.
The problem is I don't have another phone and there's no MTTY process to unbrick our phones so I'm a little hesitant to try.
Click to expand...
Click to collapse
so you are relying on a dev phone that MS was gracious enough to give you as your only device and are complaining that you didn't get the update???
edit: after reading your replies, this wasn't a publicly released phone, so if you don't get the updates, I don't feel you have a complaint.

[Q] Mango update issues (omnia 7)

I was pretty excited to see the Mango update is now available for the masses.. I mean those of us who don't have our devices unlocked as a developer phone so I decided to try my hands on it. But now I have some issues. When I open ZUNE I see update is available.
It tries to update but than after rebooting and finishing step 2/2: ERROR Code 80180048. apppers
I tried this several times on Win7 X64 and x86 but I still have the same problem.
Any ideas? maybe am getting something wrong

you need to download a beta copy of zune (4.8) google it my friend

rlatarche said:
you need to download a beta copy of zune (4.8) google it my friend
Click to expand...
Click to collapse
I tried but didn't help

This could be happening for 2 reasons... Apparently your phone is getting confused by which update to download.
1) Did you unlock at any point with Chevron? If so you probably didn't check off all the languages. If this is the problem just look for the Microsoft approved walsh fix, very easy to find.
Then restore your phone to the version before it was provisioned for mango and apply the walsh fix. VERY IMPORTANT CHECK OFF EVERY LANGUAGE. Then restart the mango process and people have posted that this should work.
2) If, like me, your a registered developer and still getting this error then unfortunately I've only been able to find 1 fix. Microsoft is working on correcting the problem but has said it will take a couple weeks. So on to the fun part. You need to flash your phone back to factory form. Flash not reset. You lose everything. Good this is your purchase history, contacts and calendar should be attached to your live id, if not you might want to sync them.
To flash your rom just search these wonderful forums to find it. All I searched for was "flash focus rom" and found a thread with the files and instructions were in the files. Once your phone has been flash you should have no problem updating to mango although you have to go through all the original updates and re install and set up your phone.
Hope this helps... it worked for me.

mrcrazy11 said:
This could be happening for 2 reasons... Apparently your phone is getting confused by which update to download.
1) Did you unlock at any point with Chevron? If so you probably didn't check off all the languages. If this is the problem just look for the Microsoft approved walsh fix, very easy to find.
Then restore your phone to the version before it was provisioned for mango and apply the walsh fix. VERY IMPORTANT CHECK OFF EVERY LANGUAGE. Then restart the mango process and people have posted that this should work.
2) If, like me, your a registered developer and still getting this error then unfortunately I've only been able to find 1 fix. Microsoft is working on correcting the problem but has said it will take a couple weeks. So on to the fun part. You need to flash your phone back to factory form. Flash not reset. You lose everything. Good this is your purchase history, contacts and calendar should be attached to your live id, if not you might want to sync them.
To flash your rom just search these wonderful forums to find it. All I searched for was "flash focus rom" and found a thread with the files and instructions were in the files. Once your phone has been flash you should have no problem updating to mango although you have to go through all the original updates and re install and set up your phone.
Hope this helps... it worked for me.
Click to expand...
Click to collapse
Thanks for reaching out to help me but I think I will give up now. I did all what you told me.. I read from other places even before you responded but it still didn't work. Am thinking its a problem with my Samsung Omnia phone so I guess I have to wait till the Final release of mango comes out. I had also the same issue with NoDo, I had to wait till the official Samsung fix came before I could finally get it.. guess this is like that too.

Sorry I couldn't help more. I have an unlocked ATT Focus running on Rogers... I was able to flash an Omnia 7 ROM on it but that was horrible because the phone literally began to mix the up and down and the portrait and landscape modes.
Did you try and flash your omnia back to stock?

I couldn't return back to the the stock ROM. My boot-loader is probably damaged . When I press the the volume up + and camera button to enter into download mode all I see is the black and white screen ..

[ROM][ODIN] P500VPBMB3 Sprint 4.1.2 Firmware

P500VPBMB3 Sprint 4.1.2 Firmware
For some unusual reason there is little to no development for the SPH-P500 and absolutely ZERO official firmware available for the Sprint model. This means, if you soft brick the tablet trying to install something you should not have, you have no easy way of getting back to the stock firmware. In addition, getting to the 4.1.2 version of the firmware is a royal pain due to the massive amount of "PATCH CHECKS" and assert checks built in to the OTA update. This means any deodexed system or a number of other reasons will be rejected if you try the OTA update while on non-official or approved firmware. So, for your convenience, I have compiled a simple ODIN-Flashable TAR file which will jet you up to speed installing the latest official Sprint 4.1.2 firmware.
Details:
P500VPBMB3 Stock w/ MB3 Modem
Package Includes: BOOT, RECOVERY, SYSTEM, MODEM AND CACHE ZONES
Download:
P500VPBMB3 Sprint 4.1.2 Firmware
Password on the archive is: www.mobiletechvideos.com
How To Flash:
BACKUP YOUR FILES AND DATA BEFORE FLASHING...ALWAYS. First extract this file using WinRAR or a program capable of extracting a RAR package as the package inside it is the TAR file you need. This was done to save time on the download. Once extracted, using ODIN, select PDA and choose this file. Now place your tablet in DOWNLOAD MODE by having it powered off, then power on by holding POWER and VOLUME DOWN until you see the on-screen text come up. Release the buttons and press VOLUME UP to enter DOWNLOAD MODE. Now click START on ODIN. Once completed (takes around 10 minutes), it is advised to enter RECOVERY MODE and perform a FACTORY DATA RESET for the best bug free experience since I don't know what ROM you are flashing from.
Did this help you out? Great, I'm glad it did! Click that THANKS button next to my name if you have the time. Please note, if you find yourself in a hard/soft brick situation of any type on any advice, give me a shout via PM or email through the contact page on our site. We also offer repairs on a number of other issues.

27 downloads and nothing? I'd love some feedback so others can be confident in the firmware.

It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....

Haha it seems that way! Well thanks for your response. Nice to hear from somebody about this. For some reason the Tab 2 10.1 forum members seem to be dead but want development anyhow without any input!

There are a lot of people here in a german forum there is mostly nobody ...
i hope you get some feedback! if not: there is not problem first things that will reported are problems

Haha, how true! No news is good news right?

problem and feedback if it works...
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks

shmusie said:
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
Click to expand...
Click to collapse
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.

connexion2005 said:
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
Click to expand...
Click to collapse
Thank you very much for your prompt reply. You seem to be a helpful sort of person. I am sorry to be so dense but I have no idea what those things are. Is there a place where I can, sort of begin from scratch to learn all about these things or can you please fully explain what I need to do here?
I get that yo said that what you are offering is what I already have. What I don't understand is what exactly what to look for. I do know that if I install the wrong thing, I can brick my device. What I don't know if how to find what I am looking for. I already tried it in the search box-that's how I got to your thread.

This is honestly a very tough section as the P500 is a rare unit that has little to no development. You are in the right sub-forum but finding any mods for your unit may not be possible at this time unfortunately.

Thank you, thank you, thank you!!!!! You can root with Kingo root and make modifications with xposed. I just have been so busy with work.
I will flash this when I have time. Now I can be more risky with flashing because I can now go back to stock ROM.
Sent from my SM-N900P using Tapatalk

Android-Andi said:
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Click to expand...
Click to collapse
Hello, I know its been almost a year, but I tried to flash this ROM and get stuck after the tab reboots with the message "POWER RESET or UNKNOWN UPLOAD MODE", is there anything I can do to restore the tab (I did not do any backup).
Thanks a bunch

Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.

connexion2005 said:
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
Click to expand...
Click to collapse
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.

meresis said:
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
Click to expand...
Click to collapse
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...

connexion2005 said:
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
Click to expand...
Click to collapse
Indeed the back says P5110 ... Chinese devices ... Thanks a lot ! :good:

P500
Wow!! I made a mistake!! I bought this tab to have some fun rooting and installing custom roms. I should have checked the forums first to see if there was any support. Thanks for what you've provided here. I'm going to at least try to root and install xposed.

I have a sprint gtab2 10.1 that's out of contract, so i'm willing to start working on things if needed.

if we no longer need to use the Sprint data can we flash a SPH-P5100 rom for wifi only ?

resurrecting an old thread. Need to find the original firmware for sph-p500. This appears to be it, but I can't find or get the password to the .rar file. I can't find the firmware anywhere else after a TON of google searches. any help appreciated in either getting the password to the .rar file, or a different place to download the firmware.

Boot loop after twrp restore of original Nandroid on gt-n8013

Howdy
Not sure where to start asking for help. Here is where I'm at :
Twrp (2.8.6?) works great... Too good
Used it to create a complete Nandroid of my original (jb) system.. I backed up everything I could see.
Installed a blisspop rom that also worked.
Decided to return to the original system .
In twrp did factory reset, advanced wipe of dalvic cache, data, and system each time.
Did restore with md5 check. 6 md5's all good, no failures
Restore from Nandroid file on ext micro sd. Everything successful. No fails reported anywhere.
Reboot. System tries to start but returns to twrp instead of booting to system. Have done this 3 times with same results.
My stock was something like UEUCOI1.
I hate to have to start over but will if that's the best I can do. If so I don't know where to proceed from here. Where to locate a stock room
Any suggestions are much appreciated,
Best regards,
Dr Dan

Jonathan Kang said:
Ok, I have seen what you have done. You installed and did too many things at once on TWRP! If you do that you will get a bootloop or a soft-brick which is very common. If I ever got stuck I just downloaded Samsung Smart Switch for Windows.
1st: Turn off your tablet/phone.
2nd: Press More then Emergency software recovery and initialization.
3rd: Press Device initialization.
4th: Take off your cover of your tablet/phone and see the sticker for the Model Number and the Serial Number and type it in.
5th: Sit back and wait for 10 - 120 minutes and it should be done!
(Not all steps have been written down in this post. You'll see it in the Smart Switch app for Windows.)
That should do it!
Hope I helped,
Jonathan
Click to expand...
Click to collapse
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:

drdan123 said:
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:
Click to expand...
Click to collapse
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan

drdan123 said:
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan
Click to expand...
Click to collapse
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.

drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
I actually starting to think that twrp is just not the right recovery for Note 10.1. When I was trying to flash the original software it happened to me too. It just has a bug or insufficiency to install system on some roms. Here is what I did:
-Installed gnabo rom for a system base. I STRONGLY SUGGEST THAT YOU FLASH THE SAME BASED ROM WITH THE ROM YOU WANT TO FLASH.
-Wipe everything EXCEPT system.
-Flash the rom you want. In my case it was the stock rom.
Well, not a proper, solid solution but if it's working, who cares?

Hi furkey,
I also saw the gnabo room. I got 6 files...
Gnabo room v8
N801x+v6. Zip
Update-supersu-v1. 99.zip
Gt-n8013-kk-WiFi -fix .zip
Stock-gt-n8000-leaked-kk-boot.img-cwr-installer.zip (really a convoluted name?)
V8-final-fix.zip
I was unable to get the kernal. Each attempt sent me to the playstore to install Mega drive. I have it already installed and am fully subscribed but...
I wrote Mikyno (the creator of gnabo) asking for help but never heard back.
The morass of gnabo files is bewildering. I don't know what I need and don't need and how or with what tools to load them.
I'm pretty sure I need the kernal as I understand it the kernal is the interface between hardware and software. Without it and without some guidance or support from the creator I gave up.
Then I spent a couple of days trying to locate a 4.1,2 stock firmware (ready to give up on roms altogether) . There were several published but all links have expired and the posters do not respond. Sammobile requires a puzzle be solved to register. I spent several hours trying to make my tablet move a puzzle piece. No success.
Finally I gave up and reloaded the blisspop I'd installed to start this journey. It is a bit flakey at times but it's all I have. I cannot go forward and cannot go backward.
Any directions you can send my way are much appreciated.
Dr Dan

Hello,
I too am experiencing this. I really can't throw this device away. I have even tried a stock rom from high on android. Downloaded and used odin to flash to no avail. I hope anyone will have an answer or another stock rom or anything!
Thank you!
Tony

Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan

drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.

Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.

badteddy said:
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.
Click to expand...
Click to collapse
Hi Tony,
Thanks much for the links. That site has always given me grief. When I select download it simply takes me back to the same page to select download again etc. This time your 2nd link worked! Great day. I got the file, unzipped it, removed the ". Md5" extension and ran the md5 Checker. It failed. I hope you checked yours before installing it. Is there any other place I can get that file. Upon returning to the same page to dl the file again I got stuck back in the old circle I have always found myself in.
On anther note; I think furkey is stepping in to help. He wants us to try the gnabo rom. It looks good but there are 7 files needed. I don't know if furkey was referring to you or to me in his last post. I'll ask and see. I think he can easily clear the air on what is needed to load gnabo.
I also am using the latest twrp (2.8.6 I think).
I'll get back when I learn more.
Dr Dan

furkey said:
Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.
Click to expand...
Click to collapse
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.

drdan123 said:
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.
Click to expand...
Click to collapse
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.

drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
OK. I tried out the Tab S Sensation Rom. It is outstanding. Here is a link that shows what I did,
http://forum.xda-developers.com/showpost.php?p=67440486&postcount=342
Furkey recommended it and he was spot on!
I was never able to dl the link you gave but I did find the file and checksum on a different mirror. I finally got it but have no use for it as the tab s room works better than the stock.
Enjoy,
Dr Dan

furkey said:
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.
Click to expand...
Click to collapse
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan

drdan123 said:
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan
Click to expand...
Click to collapse
You're welcome mate. I am glad that worked out for you

drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
Hello, drdan123,
I am Jonathan Kang, and I'm using my secondary account.
So try to use Samsung Kies because it probably supports older devices. Smart Switch is for the newer devices. I hope I helped!