Related
(At the request of management). Even with all the unsticking / mod intervention and warnings up the wahzoo, there are still a lot of user problems. It may return in a week , but for now it is PULLED. The moderators have hidden the thread, at least for the short term.
For those of you on TNT Lite 5 / TTx, just keep using it and no worries. Once we know where VS is headed, I will have a plan to either ask you to downlevel or upgrade. Again, depending on what they do.
EDIT: For those of you who had issues, could you please write up the steps you used before it failed? It would help everyone to understand why there are so many problems with this 3991 stock / TNTL 5 / TTx. From the posts and PM's I've seen, the majority have been either:
1- The device was flashed with clockworkmod to 3991/TNTL5/TTx and gets stuck at the birds or
2- The device was being prepped to stock 3588 and recovery was broken, after the 3588 reversion.
But I'm hearing that others might have applied all the proper steps and still had problems. We're trying to gauge just where the problem lies with this 1.2 UAT of Viewsonic's.
From my own device, I know that clockworkmod flat-out does not work. That's because the BCT partition is being touched by standard recovery, which clockworkmod does not replicate (and seems to be required). But as long as I have a clean 3588 stock ROM running on my device, I have not had an issue upgrading to 3991/TNTL5/TTx, it has worked for me 100% of the time.
Stock 3991 / TNT Lite 5.xx / TTx .9x backout instructions:
There are two way I know of to back out of these:
- Flash to stock 3588. This assumes you have NOT added clockworkmod and have standard recovery. I have done this several times and never had a problem. Stock 3588 link: http://forum.xda-developers.com/showthread.php?t=842000
- nvflash using bekit's 1105 image: http://forum.xda-developers.com/showthread.php?t=861950. This is still the best way to back out, as far as I'm concerned. You can do a full erase first, to wipe user data as well, thread is here: http://forum.xda-developers.com/showthread.php?t=974422
NOOOOOOOOO. Hopefully VS will decide what they are going to do by the end of the month. I am enjoying TnT Lite 5.0 with no issues at all. Thank you for all your hard work Roebeet, it is unfortunate that so many have had problems with this.
Damnnn, was about to install it
Really sucks that people have had problems maybe people should read and then re-read instructions instead of jumping into things and just assuming devs and mods can help them out. They have a life and dont think that after putting in all the work in to create something they want to hear from whiny a$$, irresponsible people that probably caused their own problem
Now people, like me, that wanted to install cant. nice.
thank roebeet tho and all the other g tab devs
I'm running two tap x. 9.0.2 with absolutely no problems. Never did have any problems from the beginning of 5.0.0. I'm am ferry close to being a noob, but I just had the instructions up on my laptop and followed them step by step. Will the new version of clockwork work to go back to 3588 if nessacery?
Thanks for all your hard work Roebeet. I barely use my laptop now that I have this tab.
One of the obstacles I've had in the last 2 weeks is that this is a UAT, not a released firmware from Viewsonic - so its validity is in question (and understandably so). If they release it with the same bootloader and upgrade requirements, it's going to shake things up here a bit.
I still think the odds are that they will - from their standpoint, they are only supporting stock users so, as long as they can ensure that a user is on 3588 stock, then the upgrade should work. In our case, many of the issues were either getting from a mod to 3588 stock, or using clockworkmod by mistake. Viewsonic doesn't have to worry about either of those issues.
But, there's still the X-factor -- everything is 3588 stock and the upgrade still fails. That might be what's holding them back.
bkbrod said:
I'm running two tap x. 9.0.2 with absolutely no problems. Never did have any problems from the beginning of 5.0.0. I'm am ferry close to being a noob, but I just had the instructions up on my laptop and followed them step by step. Will the new version of clockwork work to go back to 3588 if nessacery?
Thanks for all your hard work Roebeet. I barely use my laptop now that I have this tab.
Click to expand...
Click to collapse
No, clockworkmod won't work (even the new one) - if you wanted to backout to old stock (3558, for example), you'd have to use Viewsonic's recovery. Clockworkmod will kill your device, trust me on that. nvflashing to bekit's 1105 also works, that's how I've been backing out to old stock.
Hmmm
In the last 24Hrs, my gTab v.9.02 just decided to go totally nuts. Constant FC's, lockups, lost sound. Tried every fix listed on XDA, wiped /data , re-downloaded apps from Market instead of restoring with TiB; wotked for a little bit, then the same FC's. And random loss of sound.
Going back to 3558 and CWM and 4.2.5.
We'll see what VS throws our way.
Keep up the good work Mr.Roe!!!
roebeet said:
The backout, btw, is the same -- run stock 3588 and it will downlevel you back to the old bootloader. BUT, make sure it's standard recovery and not clockworkmod.
Click to expand...
Click to collapse
Perhaps you should post the method and files in this thread. I know that it's in multiple places, but it never hurts to have them handy in a thread that is this important. Just a thought.
TwoTapsX works great for me so far. Had TNT Lite 5.0.1 but it wouldn't run some apps correctly. Tried all the ROMS and they all had sleep of death problems. TwoTapsX works the best for me without giving any glitches.
TwoTaps .9.2
Thanks Roebeet for all you do here. I am finding this ROM easier to work with than any other. I have noted that periodically it will flash the home screen while I am working. Mostly this has been while in Dolphin Brower HD.
jholmes5 said:
Perhaps you should post the method and files in this thread. I know that it's in multiple places, but it never hurts to have them handy in a thread that is this important. Just a thought.
Click to expand...
Click to collapse
Good point, since the other thread is hidden.
So far I have installed both version and removed them a few time without issue but the last time I removed it...
I needed to re-flash and wipe a few time, it was booting into the launcher but flashing the screen like crazy...
but since the nvflash recovery doesn't erase the root of the device something was making the screen flash black and reload of the desktop repeatedly.
I was able to run root explorer (that survived the nvflash restore) and copied another rom (calkulin) and even there after using his erase tool and running all wipe available from clockwork and calkulin one after the other... (I load clockwork with the part9.img trick) I had to re flash twice until the desktop loaded properly without flashing..
I would like to find a tool that can erase and rebuild the WHOLE tablet...
I have away updated to 3588 thru the online download each time. Anyway I will hold to the current rom for a bit!
P00r said:
So far I have installed both version and removed them a few time without issue but the last time I removed it...
I needed to re-flash and wipe a few time, it was booting into the launcher but flashing the screen like crazy...
but since the nvflash recovery doesn't erase the root of the device something was making the screen flash black and reload of the desktop repeatedly.
I was able to run root explorer (that survived the nvflash restore) and copied another rom (calkulin) and even there after using his erase tool and running all wipe available from clockwork and calkulin one after the other... (I load clockwork with the part9.img trick) I had to re flash twice until the desktop loaded properly without flashing..
I would like to find a tool that can erase and rebuild the WHOLE tablet...
I have away updated to 3588 thru the online download each time. Anyway I will hold to the current rom for a bit!
Click to expand...
Click to collapse
In the dev sub forum there is format utility thread that will completely wipe out all the partitions on the tab.
manikin13 said:
In the dev sub forum there is format utility thread that will completely wipe out all the partitions on the tab.
Click to expand...
Click to collapse
It does not... if you install a custom boot animation it stay there... so it's not full even if after the unit doesn't even start (red text) it's not fully wiped...
I have used clockwork with the partition option, this seem to perform a full format with either the nvflash format or bekit recovery but I am not sure why we can't get this done tru the nvflash...
manikin13 said:
In the dev sub forum there is format utility thread that will completely wipe out all the partitions on the tab.
Click to expand...
Click to collapse
It's in my first post, as well. Run that nvflash first to erase the device, then the bekit 1105 nvflash to complete the process.
What seems to happen is that the old stock / new stock user data setups are not compatible. When going to new stock, it's not so bad because new stock has a better recovery. But when reverting, old stock has a crappy recovery with no user data wipe options. Even Viewsonic understood the limitations which is why they changed their recovery in this UAT of theirs.
I mentioned to jerdog that I wanted to see if I could port their new recovery to old stock (using an old kernel). If that works, we could conceivably offer a "bekit 1105 enhanced" version that adds it. This is better than clockworkmod in that it's the vendor's own recovery and includes the ability to wipe user data, calibrate the device AND update / downlevel the bootloader. For the purposes of getting users backed out if needed, it might be a critical piece of the puzzle.
EDIT: No go. The recovery functionality is actually IN the kernel, my bad. So it can't be ported over. Oh well.
You guys are GODS at this. Simply amazing what you are all doing with this G Tab. So I guess I'm one, of some lucky few, that ACTUALLY READ the install instructions for 5.0 and 5.0.1.
Glad I did because I love the market on this thing.
Eagerly watching what happens with Viewsonic......Any chance they did this as a step to make a Honeycomb upgrade easier? I doubt it since the original G Tab with OTA updates is still crippled.
First off just want to give my thanks to roebeet and the devs here at XDA. I've been running TnT Lite 5.0 / TwoTapsX ??? since the day I bought my Gtablet on 3/11 with no problems. On Friday the 11th I was itching for a Xoom somehow managed to find out Staples had the Viewpad 10 but not in store and somehow managed to end up finding out that Office Depot had the Gtablet for $379.99 in store. I read roebeet's at the time TnT Lite 5.0 thread several times before walking to my nearest Office Depot and brought home a Gtablet within minutes of reading that thread.
Out of the box from 2967 I went to 3588 through stock recovery and not OTA; and then did the same thing to go to TnTLite 5.0.0
I have successfully backed out of TNT Lite 5 in two ways:
1- Re-run a stock ROM. Specifically, I tested 3588. STOCK is important, as the bootloader will be downleveled to the necessary revision.
2- nvflash, using bekit's 1105 image.
In the case of stock, you might get stuck in a boot hang due to the possible need to wipe user data. So, I would recommend running the update.zip off a microSD so you can install clockworkmod .8 (old version) to give you the ability to wipe data.
Once you have old stock back, you'll be able to install older versions of TNT Lite, VEGAn, zPad, etc. as the bootloader is downleveled again.
Click to expand...
Click to collapse
My question to roebeet or anyone who has gone from TnTLite / TwoTapsX back to 3588 using stock recovery. I could swear the above quote from roebeet had an additional line about using stock recovery to run the 3588 stock rom and then wiping user data from stock recovery. From TnTLite 5.0.0 can I go back to 3588 using the stock recovery and wipe user data with the stock recovery after running 3588 but before rebooting?
Android system recovery <3e>
Wipe Data/Factory Reset
Wipe Cache Partition
Click to expand...
Click to collapse
If it is possible to wipe user data after flashing back to 3588 do I need to just wipe data or do I need to use the 'wipe cash partition' as well.
edit: never mind my rambling probably better to wait until we know what Viewsonic is going to do and at that point roebeet will let TTx users know how to proceed from TTx to whatever comes down the pipe from VS
I did have a line (I think in the TwoTaps thread) about reversion and wiping data before you reboot into 3588 stock. But, I tried this once myself and it didn't work.
Maybe I should make a special 3588 "mostly stock" with clockworkmod, as a backout solution (so that, if you get into a bootloop situation post downgrade, you already have clockworkmod installed to fix it - that could work). It's the "wipe data" option, btw.
But first, lets see what the vendor does - if they stick with this new bootloader then TNTL5 / TTx users might already be one step ahead of everyone else - you may not want to backout.
Using it since first release with no problems. I always read the entire first post as well as user issues prior to updating. There are probably many users that try before reading which can lead to issues.
I think this is a great ROM.
Sent from my GTablet-TwoTapsX using Tapatalk
I'm one of the ones who ran into troubles getting this to load and I honestly believed I followed all the instructions when doing so. I've tried mostly all of the custom ROMs and was on the Vegan experimental before loading TTx. Not sure what the problem was but nvflashing with or without recovery didn't take. Kept getting stuck in APX mode. I wasn't really worried since I could always get the tablet to take the nvflash so I just kept playing with it until lo and behold, I was able to enter the TTx recovery mode. Been working fine since. I really like this ROM but I definitely feel like the disclaimer is justified - if you're not into tinkering this isn't something you wanna try.
The only problem I've run into so far is that when I recover my Angry Birds file and run the app it FC's. Runs fine if I just install either version, but when I try to restore my saves by using TB, the app refuses to run. Weird. Other than that, no problems. I don't really like the default browser, but understand that it's required at this point. FLash works fine and I haven't had any issues at all with the market. Even found a few apps that were supposedly only available with XOOM builds.
Many thanks Robeet and hopefully we can get a more "idiotproof" upgrade process.
T
roebeet,
Where can we obtain the bekit 1105 file?
I remember seeing the name somewhere but don't remember seeing the D/L source.
Rev
Hi,
Am running the stock rom, am rooted and have CWM as well...but it's running like poo. I believe that's the technical term
Screen transition, lag on opening apps, FC here and there, very sluggish overall. I'm not sure if it's all the adding/removing of apps or just the factory junk that's on it (although have removed the Samsung 'Hub' apps via Titanium).
I haven't downloaded the update yet, because read it removes root.
To 'clean' up my problems, and get up to date, would it make sense to:
- factory reset
- install factory update
- install cwm
- root
Thanks!
errr....anyone?
I spent the better part of the weekend rooting, flashing, unrooting, flashing...
It seems to be a fairly common occurrence to turn the tab into fecal matter (sounds more technical). Mine was laggy, jittery, and didn't want to wake up. I flashed it back to stock, which fixed it, but I lost root and haven't been able to get it back. Exhausted, I left it there and will try again tonight.
Curiously, I had mixed success with Odin and Heimdall. Odin seem to need the Sammy USB drivers. Heimdall wants its own. Heimdall installed Super User. Odin let me root so I could install from zip.
I still haven't got it all figured out, but it sure gets tiring rebooting the tab, the PC, the dog and reinstalling the drivers, downloading firmware, yadda, yadda...
Here's hoping one of the very talented developers here will come up with an idiot-resistant script for us (me).
It would be more helpful if you stated 7" or 10.1 tabs. Rooted my 10.1 once, after first reboot opened CWM and reboot a second time , all is well. Debloated w/ rom toolbox and installed apex launcher, sweet as can be.
Pp.
PanchoPlanet said:
It would be more helpful if you stated 7" or 10.1 tabs.
Click to expand...
Click to collapse
Ah. Sorry. I have Galaxy Tab 2 (7.0) stuck in my brain.
Could they have picked an uglier name?
Alright, so here goes. I've searched the thread for the issue I'm having, but have come up empty handed. I'm not Droid noob, especially not when it comes to flashing roms. But, here are the details I have.
I had been following dragonzkiller's development on his ICS rom. I hadn't really put forth any effort looking lately until yesterday, and saw that he had the wifi and camera fixed, which were really my two biggest issues, so when I saw that, I was excited. I began working on getting it all running. I've had the x2 for about 5 months or so, and usually, the first thing I do, as soon as I get a new phone, is root it. Back in April, I rooted with GingerBreak. Worked good, no issues there. Back in June, apparently I still received the OTA update taking it to 2.3.5-418, which I found out last night had kinda broken my root. So, I went back to find a way to re-root. I did that, with a desktop .exe that went in, and was supposed to flash BSR to my phone also. After I ran that, all my root permissions started asking for options again, so I was relieved. Now, for the issues I'm having.
I downloaded an app in the play store called Online Nandroid Backup. For some reason, and I think this may be a dev issue with the app, it won't run a backup, and tells me that it wasn't able to be granted superuser permissions, even though it is prompting and I'm allowing. Issue number two is this. I've tried 3 different ways to get this working. I used ROM Toolbox Lite, selected the rom I wanted to flash, and wipe data and cache, no delvik. I've selected to run a backup of my current rom. When it boots into recovery, I only have 4 options. Reboot your phone, something about installing the rom from sdcard, wipe data, and wipe cache. I'm not given the backup option on the recovery. Furthermore, when I kinda just decided that since I hadn't had any trouble flashing a rom to any of my other phones I've had, I would just try to flash the rom, it gives me a prompt about 25% through the rom package saying E: signature could not be verified, or something to that extent.
Even though it has said not to use Rom Manager, I did download that and try that, and got pretty much the same outcome of no rom, just a bit different scenario going through. Rom Manager won't reboot into recovery, and when I select to do a backup, it reboots the phone straight up. I also used the manual entrance into recovery, volume up, but it tells me something about starting RSD protocol, and sticks at that forever.
My real questions are this... I've always ever used CWM. All of my previous phones have been supported by Rom Manager nicely, so when it came to downloading and flashing a rom on them, no problems at all. I have never used BSR, to my knowledge, so I'm not sure if the recovery screen I'm seeing is the actual BSR recovery, or if it's some other recovery. If it's not BSR, do I just flash it like I would a rom, then re-run into that? And does the signature issue that I'm running into mean that I have to wait for a signed version of the rom in order to work it? Is there any way to fix this issue, or am I basically SOL right this moment? Any information on how I can fix all of this would be greatly appreciated. Thank you.
This is the stock US KitKat ROM for The Galaxy Tab 3 7" Tablet. Finally found it after a bunch of hassle online, and figured I'd post it here to make things easier for everyone.
When I Odin'd this ROM, it actually upgraded my tablet, and left all my items installed (not guaranteeing this will work the same for everyone else).
Afterwards, I just Odin'd TWRP to reroot using Chainfire's SuperSU (no other Superuser would work) and called it good.
Caution: if you are using a custom ROM, this may not work without reflashing stock 4.1.2 since the 4.4.2 ROM appears to be an update, rather than a full ROM.
Rooted devices and custom kernels that are otherwise stock should be fine.
The cache, and if possible dalvik-cache should be cleared before flashing. Some of those files can sometimes interfere with upgrades.
It might be necessary to pinpoint apps that are force closing, uninstall and reinstall them. Some apps, particularly paid apps, store their data differently on KitKat, and will automatically fail as a result.
If that fails, it might be necessary to factory reset the device.
The Stock 4.1.2 ROM for the T210R is available here: http://forum.xda-developers.com/gal...-stock-sm-t210r-4-1-2-jellybean-odin-t2958676
The T210R...XAR file is for the 210R:
https://drive.google.com/open?id=0B2iEgzRTFjrQTmI0ZjRBbWtOajQ&authuser=0
The ITV file is for the T210 (no R)
To download these ROMs, a torrent client is required (such as utorrent).
Anyone who wishes to contribute, please seed if you can after downloading ("Force Starting" the torrent will seed it indefinitely.)
Can I flash this on the SM-T210?
john410 said:
Can I flash this on the SM-T210?
Click to expand...
Click to collapse
I've seen both devices referenced together quite regularly, implying that they use the same ROM.
http://www.boeboer.com/samsung-galaxy-tab-3-7-sm-t210r-manual-guide-wifi/
And even use the same kernel from what I've read:
http://forum.xda-developers.com/showthread.php?t=2439564
I would take standard precautions, such as having a odin image of your original software available and performing a backup of your current system (if able).
Perhaps someone else has some insight to this question?
edit: Looks like I had my information wrong. Found where I obtained the ROM from, it is for the T210R model, and was not intended for the T210.
There are custom ROMs that have been patched for use on both devices, which is where my confusion came from, but this is an official ROM.
I have gotten my hands on the T210(no R) ROM file, and have update the Links above.
I am not responsible for any failed attempts at flashing to either device.
Greaper88 said:
I've seen both devices referenced together quite regularly, implying that they use the same ROM.
http://www.boeboer.com/samsung-galaxy-tab-3-7-sm-t210r-manual-guide-wifi/
And even use the same kernel from what I've read:
http://forum.xda-developers.com/showthread.php?t=2439564
I would take standard precautions, such as having a odin image of your original software available and performing a backup of your current system (if able).
Perhaps someone else has some insight to this question?
edit: Looks like I had my information wrong. Found where I obtained the ROM from, it is for the T210R model, and was not intended for the T210.
There are custom ROMs that have been patched for use on both devices, which is where my confusion came from, but this is an official ROM.
I have gotten my hands on the T210(no R) ROM file, and have update the Links above.
I am not responsible for any failed attempts at flashing to either device.
Click to expand...
Click to collapse
First, thanks for this. I have the T210R. I tried using this and had the same result, it updated the tablet instead of loading a completely new version. I did however run into a problem...the tablet had many for closes and reboots to a point it was unusable and so I reverted back to my backup. Did you see this? Maybe I had a bad download?
[email protected] said:
First, thanks for this. I have the T210R. I tried using this and had the same result, it updated the tablet instead of loading a completely new version. I did however run into a problem...the tablet had many for closes and reboots to a point it was unusable and so I reverted back to my backup. Did you see this? Maybe I had a bad download?
Click to expand...
Click to collapse
I did not have this problem, but I didn't have much on my Tab either. (Some apps don't play well with KitKat upgrades.)
Torrents have multiple segmented hashchecks to make sure you get an uncorrupted download, but it might still be possible. I'm reasonably sure my file is OK since I've used it (can't speak for the non R file though).
Did you clear your cache, and if possible your dalvik cache? I've read that some of those files interfere with upgrades.
If you can pinpoint the apps that are force closing, uninstall and reinstall them. Some apps, particularly paid apps, store their data differently on KitKat, and will automatically fail as a result.
Other option would be to try a factory reset and see if that fixes it. (I understand not wanting to do that though.)
One more thing, if your ROM isn't stock, or stock rooted (custom kernel should be ok too), you may have to flash 4.2 before the 4.4 ROM will work on the device.
Right guys, here i go, just joined and first question!!!
i have not ever rooted a sm-t210 but it was rooted when i bought it second hand!
i have linux installed on my p.c. and was wondering if there is a way to upgrade to and official KITKAT!
as stated i am having problems because my SM-T210 wifi only! and want to update to kitkat official release!
but was hoping also that there is a way/method to root via LINX and not via windows!!
if that is not possible how do i go about it on windows!! as i can use a friends WINDOWS-P.C. if i must!
ah also my SM-T210 does not have the options to change the function of the USB-function,,,
i.e.
it used to have an option to,, use as a mass storege, media transfer or use with samsung keis,,, or some thing of the sort
but this option has dissapeared! may have been my fault!!!! as i uninstalled some system apps,
now it crashes and reboots whenever i try to turn of USB-DEBUGGING options in DEVELOPER-OPTIONS !!!!
many thanks in advance,
Void.Naught
void.naught said:
Right guys, here i go, just joined and first question!!!
i have not ever rooted a sm-t210 but it was rooted when i bought it second hand!
i have linux installed on my p.c. and was wondering if there is a way to upgrade to and official KITKAT!
as stated i am having problems because my SM-T210 wifi only! and want to update to kitkat official release!
but was hoping also that there is a way/method to root via LINX and not via windows!!
if that is not possible how do i go about it on windows!! as i can use a friends WINDOWS-P.C. if i must!
ah also my SM-T210 does not have the options to change the function of the USB-function,,,
i.e.
it used to have an option to,, use as a mass storege, media transfer or use with samsung keis,,, or some thing of the sort
but this option has dissapeared! may have been my fault!!!! as i uninstalled some system apps,
now it crashes and reboots whenever i try to turn of USB-DEBUGGING options in DEVELOPER-OPTIONS !!!!
many thanks in advance,
Void.Naught
Click to expand...
Click to collapse
I do know that Heimdall is a multiplatform flashing tool substitute for Odin. Check out
http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
for more info. Hope it helps.
thank you for finding and posting the correct files for this tab
hi i have a galaxy tab kid t2105 rooted, is it possible to install any other rom after 4.1.2?
Greaper88 said:
Rooted devices and custom kernels that are otherwise stock should be fine.
Click to expand...
Click to collapse
Just to triple check, by the above quote you mean that if my tablet is currently rooted, I should still be fine to flash this update correct? [obviously it would become non-rooted once flashed and I'd have to re-root it as you mentioned you rooted after installing]
Also, how much space does this take up?
thanks
~J
ubuntujason said:
Just to triple check, by the above quote you mean that if my tablet is currently rooted, I should still be fine to flash this update correct? [obviously it would become non-rooted once flashed and I'd have to re-root it as you mentioned you rooted after installing]
Also, how much space does this take up?
thanks
~J
Click to expand...
Click to collapse
That is correct. I was rooted running the Werewolf custom OC kernel. I still had my tablet upgrade without wiping, and one other user has reported back saying the same. But I can not promise upgrade as opposed to overwrite.
The flash file once extracted, is about 1.4 GB, I don't know sizes beyond that. It does not repartition the tablet however.
Greaper88 said:
That is correct. I was rooted running the Werewolf custom OC kernel. I still had my tablet upgrade without wiping, and one other user has reported back saying the same. But I can not promise upgrade as opposed to overwrite.
The flash file once extracted, is about 1.4 GB, I don't know sizes beyond that. It does not repartition the tablet however.
Click to expand...
Click to collapse
Awesome, thanks!
~J
Could you upload the T210 ITV file? This torrent is going to take 10 hours
No system file
Well this is awesome, system won't mount and I don't have a backup. Samsung website does NOT have the stock firmware, and attempting to get it for another country just to get this to load so I can flash a ROM leaves me with having to download at 15kbs. I am in the process of selling this to someone for their kid... And there are ZERO seeders for these files. Lovely.
Sorry, m'y post an error
ragnaroksangel said:
Well this is awesome, system won't mount and I don't have a backup. Samsung website does NOT have the stock firmware, and attempting to get it for another country just to get this to load so I can flash a ROM leaves me with having to download at 15kbs. I am in the process of selling this to someone for their kid... And there are ZERO seeders for these files. Lovely.
Click to expand...
Click to collapse
Are you looking for the Stock Rom?
Darthlord064 said:
Are you looking for the Stock Rom?
Click to expand...
Click to collapse
I am, can you help?
Greaper88 said:
I do know that Heimdall is a multiplatform flashing tool substitute for Odin. Check out
http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
for more info. Hope it helps.
Click to expand...
Click to collapse
For some (unknown) reason, Odin3 nor JOdin3 doesn't seem to work for flashing my Samsung Galaxy Tab3 device. For that reason I tried Heimdall-Frontend, but to make that work you need to extract the content of a stock ROM first.
Anyways, it still didn't lead to get my device into factory reset yet.
But that's another story on which I still have not yet found the answers needed to get the device successfully back into factory reset.
My guess is that the 'system.img' file, of Android 4.4.2, successfully has been loaded from Heimdall-Frontend, yet by going into reboot right away after Heimdall-Frontend releases the connected device, the download may be deleted.
I read that the cause of that may lie in the fact that Android 4.4.2 is only an update and no full ROM.
Help needed with: Stock rom "FORCE CLOSE" also unable to install any other rom
Heya all, I'm new to the forums.
I've got an issue (or several) with my GALAXY S I9000. It was semi-bricked and I was able to (SORT OF) resurrect it.
The semi-brick consisted of constantly deploying Samsung logo. So I downloaded odin and found (many) stock roms with different androids: froyo 2.2, gngerbread 2.3, etc.
Any android I installed, right when there's the welcome steps such as configure accounts, wi-fi, etc. I started to get stormed with "FORCE CLOSE" windows to every application going (mostly GAPPS, but it's relative assuming most of the apps in these devices are google apps). This delayed the cellphone's speed terribly, oftenly rebooting and eventually allowing me to reach the home desktop, obviously throwing forcecloses every 4-5 secs.
Towards this I installed a different CWM version with ODIN, and I was going to install another rom w/ different gapps. Then it said "E:/ NO SD CARD" blabla. So i gave the sdcard a format and now it doesnt say "No SD CARD" but every rom i try to install says "ERROR (STATE 0)"
Frustrated, I tried stock roms again, (2.3 and 2.2) and I downloaded specificly the 2.2 and 2.3 gapps, installed them with CWM lending a prayer and nope, it didnt work.
I obviously ran out of ideas by now, so I came here where everyone knows more than I do (which is no merit) I beg your help!
Maybe I flashed it with a wrong PIT, or the CSC is wrong, or the ROMS arent for this device i9000, i cant know for sure, even though i read every article i downloaded stuff from (just in case) and it looked like the right one. Anyway, don't guess I did anything right, because I must've missed something. (i am paranoic indeed)
Thank you very much!
P.S. My brother has the same i9000 and I installed the roms I downloaded for mine on his device and these workedp erfectly. (But he had CWM already installed so it must've been a problem with odin flash)
Hi there,
Best answers you will receive in the dedicated forum for this device, see bellow, but first you need to register an account on XDA for full access. Also, please read carefully this tutorials wich are very helpful to other members:
[GUIDE] Unsure which rom to choose?
[FULL GUIDE][UNBRICK][Root] Flash custom or stock ROMs or kernels [i9000][VIDEO]
For questions use this thread: Galaxy S Plus I9001 Q&A
Good luck