Hi, i just want to know how can i install gingerbread on Galaxy S I9000T from Mexico, i already try several times and no sucess, Odin fails when SBL is flashing and give me a semi-brick phone, some on told me that's a problem with bootloaders.
I already try to flash it with pit file, repartition, no repartion, no pit file, with odin 1.3 and 1.7, i downloaded several files from diferent sites, with and without bootloaders.
So i realy dont know what to do now, anybody have an advice?
Thks in advance!!
Related
So, after flashing the new KH1 for my Galaxy S II, I wanted to flash my other phone, C3300K, just for fun. I downloaded the XXJK2 from samfirmware, as well as the program, Flash Loader 7.4.4
I can't load download mode. Actually, I dont even know if it exists. Any help?
I get error PC CRC value [0x8B3A05CF]
Hello guys!
I need you help, I've Giorgio Armani Galaxy S I-9010 and I was trying to update the firmware. There was 2.2 on it and I wanted to update to 2.3.5 which is the latest official for Galaxy's.
Anyway; it's my first Android phone, that's why I didn't know how to do that. So I started to play with Odin, Samfirmware etc. As you could easily guess; now my phone is BRICKEd and I can not use that.
Now I need your help and directions. Otherwise I'll have to throw my lovely phone away. I want to restore all the factory firmware and settings back so I installed from samfirmware.com -all the necessary files. I got I9010XXKB2 file which has GT-I9010-CSC-MULTI-OXA902407.tar and I9010XXKB2-REV00-ALL-low-CL909299.tar. And I also have GA3_add_hidden.pit file.
As I read forums, I need to put I9010XXKB2-REV00-ALL-low-CL909299.tar and GA3_add_hidden.pit to Odin and it should have worked but always gives errors. I tried different combinations, I installed older version of Odin as well but can not do!
Also Odin has other parts such as PDA-PHONE-CSC etc. In that case, I use PIT and PDA options, not CSC and PHONE. Because I downloadad latest firmware from samsfirmware and there were only 2 files in zip.
Other than that; in that zip file, in that case again, I use I9010XXKB2-REV00-ALL-low-CL909299.tar and other file; GT-I9010-CSC-MULTI-OXA902407.tar -where do I have to put that?
AS you see, I don't know too much and I need to be directed. Could you please help me about that guys? I 'really' need that! Thanks in advance
I was trying to flash cm7 using cwm but my galaxi mini got bricked. i've read from some sources that i need to flash stock firmware from samfirmware (now sammobile). i cant register on sammobile (i dont know why, i have filled in all the fields and checked the accept checkbox but still nothing happened).
please, if you have a copy of a stock firmware from sammobile (gingerbread 2.3.4 or even froyo is very much appreciated), I beg you, please upload it..... thanks a lot...
kimmuy said:
I was trying to flash cm7 using cwm but my galaxi mini got bricked. i've read from some sources that i need to flash stock firmware from samfirmware (now sammobile). i cant register on sammobile (i dont know why, i have filled in all the fields and checked the accept checkbox but still nothing happened).
please, if you have a copy of a stock firmware from sammobile (gingerbread 2.3.4 or even froyo is very much appreciated), I beg you, please upload it..... thanks a lot...
Click to expand...
Click to collapse
you can try here if you know your old firmware
I apologize in advance, since I know people have asked questions similar to this already. But I am desperate for help, as I have been trying to fix my phone for 3 days now, and have not gotten anywhere!!! so here is my story/problem.
I was trying to do an update on my samsung showcase (cspire) using kies, and during the download it was interrupted somehow. The phone was bricked. (i think) so then I found something called one-click unbrick. after that i'm able to put the phone in download or recovery mode.
So i have been trying to get factory rom back on my phone. I downloaded odin3 v1.70 and v1.82 (i have tried both of these) and i have downloaded atlas 2.2 for pit and I have tried both EH09_modem_CS.TAR.MD5 and EI20.tar.md5\EI20.tar.md5. Everytime I do this odin freezes on factoryyfs.rfs.... I have tried all the tricks I can find, different usb port, diff cable, running as admin, i even download sandboxie ( someone suggested that)... I dont know if i am doing something wrong, or if it is odin... Also, i'm not rly sure about the software i'm using... I have very little experience with this kind of stuff, but i am really determined to fix this! please forgive my ignorance! TIA!!
Try flashing a custom rom and boot.img first then Odin back to stock
AshtonTS said:
Try flashing a custom rom and boot.img first then Odin back to stock
Click to expand...
Click to collapse
I've been trying to find one, you don't happen to have a link to where I can find one do you?? Also can i do this using odin, the same way I have been trying to get the stock on there?? Thanks for you help!!
Hi guys, i'm new hear, and a bit of a noob.
I've tried my best to see if existing threads would answer my query, but i'm not really sure if there's anything specific that would do the job.
First off, i have a p6200 galaxy tab plus, which was bought from Singapore.
This is an unlocked version.
Last month, i decided to flash the ATO (Austria ICS official update) via odin 1.85, which worked flawlessly.
Then last friday, i tried to install AOKP Milestone 1 custom rom.
This resulted into a bootloop.
I tried to do a data wipe, but i think this further damaged the software, as the formatting never really finished, and the unit simply rebooted back into the bootloop.
So i tried to reflash the ATO ICS rom onto the unit using Odin 1.85.
This too was a failure, as the flashing gets stuck at Nand Write Start!! factoryfs
So i tried a newer version of odin, 3.07, and that too got stuck at writing factoryfs.
Now i tried heimdall (still on a Windows machine).
That had an error "failled to access device, error: -12"
So i switched to my Ubuntu PC, and had better luck there by installing LibUSB, and opening Heimdall frontend with sudo permission.
But again, i'm stuck at uploading factoryfs.img 15%.
I'm kind of lost at this point, am i doing something wrong here?
i'm using the xxkl7 package from this forum: http://forum.xda-developers.com/showthread.php?t=1517934
then i got another set of patched .pit files from here: http://forum.xda-developers.com/showthread.php?t=1441350
i'm already up to pit with factoryfs moved by 03840 patched, and all have had the same result where i get stuck at 15% :|
i've got a lot more to try, yes, but i feel a bit hopeless here... anybody else have an idea?
all i can do is get to download mode, so i can't access recovery or anything else...
hoping for your help guys... thanks
Alex Genato
solved
posting xda-threads that helped:
http://forum.xda-developers.com/showthread.php?t=1667886&nocache=1
http://forum.xda-developers.com/showthread.php?t=1823918&nocache=1
http://forum.xda-developers.com/showthread.php?t=1900612&nocache=1
man that was a pain
but many thanks to the devs that made this unbrick possible...
Never wipe factory at stock recovery or it will brick your tab. Thats what they said.
Sent from my GT-I9300 using xda app-developers app