Hi, i just want to know how can i install gingerbread on Galaxy S I9000T from Mexico, i already try several times and no sucess, Odin fails when SBL is flashing and give me a semi-brick phone, some on told me that's a problem with bootloaders.
I already try to flash it with pit file, repartition, no repartion, no pit file, with odin 1.3 and 1.7, i downloaded several files from diferent sites, with and without bootloaders.
So i realy dont know what to do now, anybody have an advice?
Thks in advance!!
Hello guys!
I need you help, I've Giorgio Armani Galaxy S I-9010 and I was trying to update the firmware. There was 2.2 on it and I wanted to update to 2.3.5 which is the latest official for Galaxy's.
Anyway; it's my first Android phone, that's why I didn't know how to do that. So I started to play with Odin, Samfirmware etc. As you could easily guess; now my phone is BRICKEd and I can not use that.
Now I need your help and directions. Otherwise I'll have to throw my lovely phone away. I want to restore all the factory firmware and settings back so I installed from samfirmware.com -all the necessary files. I got I9010XXKB2 file which has GT-I9010-CSC-MULTI-OXA902407.tar and I9010XXKB2-REV00-ALL-low-CL909299.tar. And I also have GA3_add_hidden.pit file.
As I read forums, I need to put I9010XXKB2-REV00-ALL-low-CL909299.tar and GA3_add_hidden.pit to Odin and it should have worked but always gives errors. I tried different combinations, I installed older version of Odin as well but can not do!
Also Odin has other parts such as PDA-PHONE-CSC etc. In that case, I use PIT and PDA options, not CSC and PHONE. Because I downloadad latest firmware from samsfirmware and there were only 2 files in zip.
Other than that; in that zip file, in that case again, I use I9010XXKB2-REV00-ALL-low-CL909299.tar and other file; GT-I9010-CSC-MULTI-OXA902407.tar -where do I have to put that?
AS you see, I don't know too much and I need to be directed. Could you please help me about that guys? I 'really' need that! Thanks in advance
Hello all,
I have a rather old android, Samsung R680 (repp) that I am trying to get to Generic. I have the generic firmware files from Samsung and they flash fine via the samsung PST. But when the flash is completed the phone will not start the wifi drivers. When you check the box it says Error. I have numerous things with days of searching on forums but just cant figure it out. I am pretty sure it has something to do with the Baseband (or modem) or the Kernel. The Kernel stays the same and doesnt change through the flash, the baseband does however change. I have tried the *#523# command to reload the divers but it says: NotSet Driver loaded [NG].
Can someone point me in the right direction?
I have tried changing the baseband by finding some basebands on the forums but I am not sure they are phone specific. They always error out either when I try loading via ODIN or Clockwork.
Is there a way to extract the baseband from a working phone?
Or "suck" out a working flash from a phone and re-apply it to another phone?
Thank you for reading and for any info you might have.
Hi,
I bought a bricked Galaxy Note 10.1 GT-N8000 and managed to flash stock firmware and booted correctly except for a strange Watermark on screen which showed device specs. Then I tried flashing German Kitkat version thru ODIN which failed, now the device is stuck on Galaxy Note 10.1 screen even though I have tried flashing ODIN many times and it has shown PASS but doesn't go beyond that. It can't even go get into recovery (only can get to ODIN mode). Please help me as i can't go beyond that even though i have searched a lot google, no one seems to have gotten any solution.
34 views but no suggestion!!! It seems mighty developers never bought this phone to suggest something. It's strange ODIN can flash and shows success (firmware or any recovery) but nothing seems to install and make it boot. Pl someone got some idea?
usman3206 said:
34 views but no suggestion!!! It seems mighty developers never bought this phone to suggest something. It's strange ODIN can flash and shows success (firmware or any recovery) but nothing seems to install and make it boot. Pl someone got some idea?
Click to expand...
Click to collapse
Have you tried flashing a custom rom?.
Just realised you said it wouldn't go into recovery.
Try flashing from another pc
Which version of ODIN are you using?.
No haven't tried custom ROM but probably this device was never rooted but can give that a try. Yes it won't go into recovery at all. I will give try from another PC. I have tried ODIN v. 1.85 and v3.09.
usman3206 said:
No haven't tried custom ROM but probably this device was never rooted but can give that a try. Yes it won't go into recovery at all. I will give try from another PC. I have tried ODIN v. 1.85 and v3.09.
Click to expand...
Click to collapse
I think it might be a driver issue with your pc if it won't work with v1.85.
Trying reinstalling the Samsung drivers on your pc.
I flashed stock firmware before with the same PC and it worked and I have tried to use same ODIN and same stock firmware which worked before. Even now ODIN says PASS, infact there is no failure at all but device itself is stuck on "Samsung Galaxy Note 10.1" splash screen. I have tried restarting PC, using different USB ports but ODIN always says PASS without problem but device condition is same. I think may be i should change firmware/ stock recovery even though previously the same worked. I am at a loss, don't know what to do?
P.S: Edit: as i was writing these comments I thought of trying out same german kitkat version which earlier broke my device and this time it succeeded and at least device has come out of that splash screen though it is still stuck samsung animation screen. so i will try more and will update. any suggestions are welcome. thanks
ok, now it's possible to get into stock recovery at least, although it shows "E:failed to mount /efs (Invalid argument)" and " Applied the CSC-code : unknown". What to do now? kindly advise
Finally managed to ODIN a stock firmware to work correctly and device is able to boot but show "Broadband: Unknown". Thanks for your help
usman3206 said:
Finally managed to ODIN a stock firmware to work correctly and device is able to boot but show "Broadband: Unknown". Thanks for your help
Click to expand...
Click to collapse
Can you check your IMEI if its available in setting/device? If its not your EFS is missing or corrupt.
yes, IMEI is Unknown! that means EFS is corrupt! I know the IMEI, I have the box, how can i restore it?
usman3206 said:
yes, IMEI is Unknown! that means EFS is corrupt! I know the IMEI, I have the box, how can i restore it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2111485
Thanks a lot for the link. I will go through it deeply and try it out and will come back.
Just some food for thought! Since i bought this device bricked and never knew which firmware it came with and tried different firmwares randomly until i found one that could work only with "Factory Mode". My question;
1. Could it be that I flashed a wrong firmware causing this thing to go Factory Mode?
2. Or must it be corrupt EFS folder?
I am asking because now i rooted my device, it is showing one EFS folder and when i tried to flash Philz recovery over TWRP it gave me error that " This package is for 'c).p4noterf.n8000.GT-N8000' devices; this is a 'p4notewifi'.
E:Unable to mount '/efs'.
Any suggestions? Please
I think this efs folder is generated automatically by the android when it can't find one because when i checked it was an empty folder, nothing inside. so may the issue is of broken efs system folder. Can't create my own IMEI since i have the box and IMEI is written on it.
Does this device use SIM to make calls or just for data download? Couldn't figure out! Is there a simple way to get rid of the "Factory Mode"? may be i don't need all that SIM functionality after all but certainly want to get rid of that "Factory Mode".
Can I try this one
http://forum.xda-developers.com/showpost.php?p=39523753&postcount=4
Any suggestions, kindly do suggest if i should do whatever is described in the above post or the ones suggested before written below
http://forum.xda-developers.com/showthread.php?t=2111485
Please advise which method should i try. Awaiting eagerly for input
Is it possible to use following tool to repair EFS?
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
Please suggest me something if someone out there know something?
Finally fixed it by using the thread shown above but i have a fake IMEI but factory mode is no longer there and everything is working normally. Is it possible to change IMEI to my own by using methods i have seen on net including youtube? please advise
usman3206 said:
I flashed stock firmware before with the same PC and it worked and I have tried to use same ODIN and same stock firmware which worked before. Even now ODIN says PASS, infact there is no failure at all but device itself is stuck on "Samsung Galaxy Note 10.1" splash screen. I have tried restarting PC, using different USB ports but ODIN always says PASS without problem but device condition is same. I think may be i should change firmware/ stock recovery even though previously the same worked. I am at a loss, don't know what to do?
P.S: Edit: as i was writing these comments I thought of trying out same german kitkat version which earlier broke my device and this time it succeeded and at least device has come out of that splash screen though it is still stuck samsung animation screen. so i will try more and will update. any suggestions are welcome. thanks
Click to expand...
Click to collapse
Hi there.
The Note is a tablet 10.1 wifi version?
Is that I have exactly the same problem as you and I do not know what to do to get my tablet.
Could you give me the link of the rom with which you solved the problem? Thank you
spider1371 said:
Hi there.
The Note is a tablet 10.1 wifi version?
Is that I have exactly the same problem as you and I do not know what to do to get my tablet.
Could you give me the link of the rom with which you solved the problem? Thank you
Click to expand...
Click to collapse
Mine is wifi+3G version, its called GT-N8000. Mine was bricked before and I flashed it using ODIN (its available everywhere almost) and stock firmware (you need to use the one installed on it from factory, you can find download link from sammobile site but be careful download the one that is specific for you model no.). Then describe your problem may be i can help you.
Hi guys, I had successfully rooted my tab in the past. Then, a couple of days ago, I decided to unroot it and ... I messed it up. I have downlaoded Odin, the firware drivers, BL, AP etc. but I stuck in the attached screen. I understand (not 100% sure) that I need to replace the vbmeta image but don’t know how. Can you please help me out? The device is a Galaxy Tab S6.
bugspy said:
Hi guys, I had successfully rooted my tab in the past. Then, a couple of days ago, I decided to unroot it and ... I messed it up. I have downlaoded Odin, the firware drivers, BL, AP etc. but I stuck in the attached screen. I understand (not 100% sure) that I need to replace the vbmeta image but don’t know how. Can you please help me out? The device is a Galaxy Tab S6.
Click to expand...
Click to collapse
Have a look here:
https://forum.xda-developers.com/t/a70-vbmeta-error-after-magisk-update-20-0.3982421/
It is about a different device, but the same error. So maybe the same cause.
Keep in mind to only flash firmware, recoveries, etc. matching your device.
Some users reported that re-flashing a current version of TWRP recovery fixed this problem.
Then you can try to flash a complete stock firmware with Odin on PC to your device, if you want to unroot again.
I have the same problem, did you solve it?