Database Info

[Q] SGR won't boot after ICS update

Few days ago I updated to ICS. Here are the steps that I followed:
1. Downloaded the ROM and entered the DM mode in SGR
2. Using ODIN I updated the OS to ICS
I am not/was not very knowledgeable about other steps that needed to be done. Everything went well (at least it look to be the case then), but noticed that when on Wi-Fi and using the facebook app, my phone often freezes up. A force re-start use to solve the problem. However today, the phone didn't reboot after a force closure.
I have tried going to the recovery mode. I get the android logo but it shuts down soon after that.
I was hoping to enter the download mode and install another version of OS but the phone doesn't go to the download mode. Couple of time it went to something called "Safe Mode" but the screen was unresponsive. Also I think the de-bug node might not be checked on in my phone
And now finally it is showing something called "encryption failed error" and asks me to do a "reset settings". When i click that nothing happens and the screen goes blank.
My phone is still under warranty. Not sure if installing ICS would have made it void. Any suggestion as to what can be done to get out of this mess will be much appreciated.
Thanks.

Do you sure?
You can't go to DM and Recovery?
Impossible...
Perhaps some hardware problem happend!
Sent from my WT19i using Tapatalk 2

saeed74 said:
Do you sure?
You can't go to DM and Recovery?
Impossible...
Perhaps some hardware problem happend!
Sent from my WT19i using Tapatalk 2
Click to expand...
Click to collapse
Not sure what could cause it but I am pressing the power key + Volume up+ Home key to enter the recovery mode..I get the Android symbol with the with the rotating structure, but after 5 seconds the screen goes blank
To enter the DM mode, I press the Power Key + Home + Volume Down key and I get the Samsung splash logo and then a message which says "Encryption Failed" Unable to complete encryption because of interruption.Perform factory data reset (earsing all your data before use). After resetting, try encrypting device again.
then there is a button to reset device. When I press that nothing happens.

srikant1983 said:
Not sure what could cause it but I am pressing the power key + Volume up+ Home key to enter the recovery mode..I get the Android symbol with the with the rotating structure, but after 5 seconds the screen goes blank
To enter the DM mode, I press the Power Key + Home + Volume Down key and I get the Samsung splash logo and then a message which says "Encryption Failed" Unable to complete encryption because of interruption.Perform factory data reset (earsing all your data before use). After resetting, try encrypting device again.
then there is a button to reset device. When I press that nothing happens.
Click to expand...
Click to collapse
1. Is your phone able to boot ?? If nt then they cant check what r u running...
2. Is ur dwnload counter more than 0 ?? If yes then it mite b a prob..
These are some steps dat any ssc do..
Also ur fone is under warranty, then visit ssc n say dat it happend durin updatin via kies...
Also ics for sgr is nw officially out..so dat wont void d warranty...!!
Sent from my i9103 using CM10 alpha

vipul12389mehta said:
1. Is your phone able to boot ?? If nt then they cant check what r u running...
2. Is ur dwnload counter more than 0 ?? If yes then it mite b a prob..
These are some steps dat any ssc do..
Also ur fone is under warranty, then visit ssc n say dat it happend durin updatin via kies...
Also ics for sgr is nw officially out..so dat wont void d warranty...!!
Sent from my i9103 using CM10 alpha
Click to expand...
Click to collapse
Thanks for the suggestion.
I can't make the phone to boot. Not sure if the SSC guy would be able to.
Is there a way to check the download counter given that I am not able to boot?

If the phone absolutely won't power on then the SSC will replace your motherboard without any questions asked..
From my CM10 powered galaxy R

vbz89 said:
If the phone absolutely won't power on then the SSC will replace your motherboard without any questions asked..
From my CM10 powered galaxy R
Click to expand...
Click to collapse
Took them a week but that's what they did. And I am happy that it was still under warranty

I have very Bad Problem !!!! plz help me

I Have a GT-I9001 S Plus and I had a security lock on it , Some of my friends entered the wrong password and my phone show me a too many lock pattern !!! iknow this Error and iknow ways to fix this problem (1.Factory reset 2.Flash my phone ) but when i ganna go to recovery menu and press the Up (volume) + home + power get Ram Dump Message and when i press just Up(volume) + power and I see the Samsung logo and after a few seconds i see android box ,After a few seconds my mobile is reboot and boot normaly , when i try to flashing with odin progrm all step is pass , and my phone be restart but when again see a android box with progress bar again reboot normaly . and No changes will occur. what sholud i do ?? plz help me .
ITRY TO RECOVERY MENU AND SEE A MANY TAPIC AND TRY EVRY WAY I VERY TIERD

taromarka2 said:
I Have a GT-I9001 S Plus and I had a security lock on it , Some of my friends entered the wrong password and my phone show me a too many lock pattern !!! iknow this Error and iknow ways to fix this problem (1.Factory reset 2.Flash my phone ) but when i ganna go to recovery menu and press the Up (volume) + home + power get Ram Dump Message and when i press just Up(volume) + power and I see the Samsung logo and after a few seconds i see android box ,After a few seconds my mobile is reboot and boot normaly , when i try to flashing with odin progrm all step is pass , and my phone be restart but when again see a android box with progress bar again reboot normaly . and No changes will occur. what sholud i do ?? plz help me .
ITRY TO RECOVERY MENU AND SEE A MANY TAPIC AND TRY EVRY WAY I VERY TIERD
Click to expand...
Click to collapse
Did you back up your phone before you started flashing?

Moved to General Q&A.

my data is not Important
poweredbymugen said:
Did you back up your phone before you started flashing?
Click to expand...
Click to collapse
No, I didnt , my informaiton in my phone is not Important , I cant flashing and factory reset ,

[Q] ICS omap4430 installing

Hello,
Iam running on ICS, and i want to get back to GB. When i am connecting my phone, its connecting and disconnecting fast but i am able to install drivers in device manager. After successfuly install it says that device is disconnected.. Any ideas ?
EDIT:
Now, after install there is still "connect/disconnect" USB sound, but it seems that drivers are installed.

Did you enter "S/W upgrade" mode ??
Hit Thanks Button If I Helped

I dont know how its called but i am doing this without inserted battery

No ,, you must enter S/W upgrade mode (by insert the battery while you hold vol+) then some thing will apper on the screen (tow arrows like the sync symbol) this will make your phone still connected with your pc .
Hit Thanks Button If I Helped

OS_Hacking said:
No ,, you must enter S/W upgrade mode (by insert the battery while you hold vol+) then some thing will apper on the screen (tow arrows like the sync symbol) this will make your phone still connected with your pc .
Hit Thanks Button If I Helped
Click to expand...
Click to collapse
Thanks, it works

Is this the first time you flash this rom ??
I mean are you sure this rom you flashed is good ??
Try flash another *.bin file .
Because sometimes the error in the rom..
Good Luck
Hit Thanks Button If I Helped

Yes, i flashed it for first time. It is bootv21e.rar from xbsall. Tried again and there is same problem... Where can i download another bin file?

Did you read the thread carefully? ?
This is for bricked phones and this rom take you into recovery to restore an old backup . Be carful before choosing a rom .
You can get many *.bin from here:-
http://forum.xda-developers.com/showthread.php?t=1246678
Hit Thanks Button If I Helped

Galaxy Fit Problem!!!

Ok let me begin by saying i have problems with my phone like in touch screen doesn`t work at all,capacitive buttons (touch buttons near home button) don`t work after i flashed without knowing s5570 firmware ( a lot of them before i figured out i had s5670) then a lot of s5670 firmwares but still no success ((( what is there do to in this case ? Phone boots every time but can`t use touch screen and the two side buttons that stand for back and settings on screen i think. Power button works and volume aswell. Please help !!!!

casmirf said:
Ok let me begin by saying i have problems with my phone like in touch screen doesn`t work at all,capacitive buttons (touch buttons near home button) don`t work after i flashed without knowing s5570 firmware ( a lot of them before i figured out i had s5670) then a lot of s5670 firmwares but still no success ((( what is there do to in this case ? Phone boots every time but can`t use touch screen and the two side buttons that stand for back and settings on screen i think. Power button works and volume aswell. Please help !!!!
Click to expand...
Click to collapse
Since ur touch doesn't work anymore, switch it off by removing battery. Now,
*Requirements:- Samsung Drivers, Odin.exe, BENI_v1.0.ops, firmware package.
1. Re-insert the battery & go for download mode by pressing & keep holding Volume Down+Home+Power buttons together. Yellow triangle appears with downloading written below it.
2. Install Samsung mobile drivers in pc.
3. Connect ur phone in download mode to pc via USB cable. Let the pc ensures ur phone to be "ready to use". Then open Odin.exe & see the COM PORT mapping box will turn yellow(indicating that ur phone is connected successfully)
4. Place BENI_v1.0.ops under OPS field & the .tar.md5 file under One Package. Click start, wait for ~10mins till done.
5. Now again remove & re-insert battery. Press & hold Home+Power buttons to enter stock recovery. Wipe data & cache there & reboot.
Problem solved...
Do let me know if u want links for certain files
Sent Via XDA™ Premium

Galaxy_Rohit said:
Since ur touch doesn't work anymore, switch it off by removing battery. Now,
*Requirements:- Samsung Drivers, Odin.exe, BENI_v1.0.ops, firmware package.
1. Re-insert the battery & go for download mode by pressing & keep holding Volume Down+Home+Power buttons together. Yellow triangle appears with downloading written below it.
2. Install Samsung mobile drivers in pc.
3. Connect ur phone in download mode to pc via USB cable. Let the pc ensures ur phone to be "ready to use". Then open Odin.exe & see the COM PORT mapping box will turn yellow(indicating that ur phone is connected successfully)
4. Place BENI_v1.0.ops under OPS field & the .tar.md5 file under One Package. Click start, wait for ~10mins till done.
5. Now again remove & re-insert battery. Press & hold Home+Power buttons to enter stock recovery. Wipe data & cache there & reboot.
Problem solved...
Do let me know if u want links for certain files
Sent Via XDA™ Premium
Click to expand...
Click to collapse
If don't go with stock ROM with 1 file, he can try with stock ROM with 4 files.

Please post in the correct forum next time, all problems and questions should go in Galaxy Fit GT 5670 Q&A, Help & Troubleshooting

No go ... Tried like 1000000 milion times not working what can i do ? Like I said i have the phone from Romania i tried even downgrading to froyo ... nothing works(( help i think i have blocked bootloader coz even when i installed froyo same bootlogo went up .... what is there to do in this stage?

Please read the forum rules before posting
Questions belong in the Q&A section
Thread moved.
Towle
XDA Moderator

casmirf said:
No go ... Tried like 1000000 milion times not working what can i do ? Like I said i have the phone from Romania i tried even downgrading to froyo ... nothing works(( help i think i have blocked bootloader coz even when i installed froyo same bootlogo went up .... what is there to do in this stage?
Click to expand...
Click to collapse
Give it to SSC
Sent Via XDA™ Premium

[Q] Pattern lock to unlock

my samsung Galaxy FIT GT-S5670 got locked by pattern lock and i am not able to unlock it
and also the Home+ power button press menu is not coming to reset all .
please send me solution

Remove battery...re-insert it. Now press & hold Home & Power buttons together until phone switches on. Now u should enter recovery & format ur phone thereby
Hope this helps...!!

phone pattern lock problem
noble able to unlock Pattrern lock
It not workin please give me another option
recovery mode is also not working
when i press vol UP + power + menu button
its shows Ramdump Mode (ARM9 mode)
and also
Power+ menu note working
In my mobile USB debuggung is on
and also downloading mode is working when i press Vol Down +power + menu button together
PLease tell me solution
:highfive::highfive::laugh::laugh:

Thats gr8. If download mode works then u don't need to worry at all. Flash stock firmware via Odin & everything will b alright then.
Btw download mode is accessed by pressing & holding Volume down & Home & Power buttons together. You'll see "downloading" written under a yellow triangle:sly:.
Note: First ensure that u know what u r doing, then implement those steps. Using Odin unknowingly may produce some undesirable issues

hey stop, before doing anything check this link maybe you won't need to format your fit
http://www.frendz4m.com/forum/showt...ogle-Android-Pattern-LockScreen-Unlocker-.htm

Frank782 said:
hey stop, before doing anything check this link maybe you won't need to format your fit
Click to expand...
Click to collapse
I think it's a malware. Thats my opinian. Just Be careful.
Using Samsung Galaxy Fit
Running on Vania Rom 1.4
Sent from Indonesia

mfmuam said:
I think it's a malware. Thats my opinian. Just Be careful.
Using Samsung Galaxy Fit
Running on Vania Rom 1.4
Sent from Indonesia
Click to expand...
Click to collapse
I don't know that but I can tell you that I used that thing and it worked for me although after a reboot my phone was in the same condition but it was good for me since, I was able to take backup of my data.