Hello, everyone, I'm aptx486 from China.
I also wanna get my i8700 updated to mango.
When I finished the preparation and launch devretailupdate, it told me failed with code 1.
And my phone stayed at the starting logo.
My computer, xp sp3, x86, sdk 7.0, no problem in installing xap.
How could I avoid devretailupdate failure and get my phone updated to mango?
THX!!!
I have an un-branded Samsung Omnia 7 (Deutsche Telekom I believe). I did the force update for mango and was able to update to 7403 just fine. However, at the last step 2 of 2 of updating to 7720 it gave me the error code 80180048. I do not have a walshed phone because I tried using the walshed fix and the program said my phone wasn't walshed. Any one having this issue or have fix for this? Thanks.
All Languages
I was having a problem with failled Mango update and I discovered I used the Walsh tool wrong. I only selected the language that was "checked" in my keyboard settings and not ALL languages that were available on my phone. Once I selected all languages, the update went flawlessly.
---------- Post added at 08:43 PM ---------- Previous post was at 08:25 PM ----------
Did you also install the Windows Phone Support Tool? It may be needed for the Walsh Tool.
I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.
frazrasheed said:
I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.
Click to expand...
Click to collapse
Samsung Focus has two hardware revisions.
You will not be able to get passed the last steps to update to Mango if you have rev. 1.4
rev 1.3(Micron): Windows 7.5 update will be available through Zune on 9/27.
rev 1.4(LSI) : Update has not entered the AT&T SPE lab yet; however, Samsung is targeting for 10/17 lab entry and 10/31 TA"
you can check which revision you have by pulling out the battery. there should be a revision number on on a white sticker on the device.
I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?
frazrasheed said:
I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?
Click to expand...
Click to collapse
sounds like a USB driver issue.
open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0
if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.
I have exactly the same problem as Starsyde.
Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.
My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).
It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.
To sum up: nothing works.
Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.
mrrtt said:
I have exactly the same problem as Starsyde.
Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.
My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).
It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.
To sum up: nothing works.
Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.
Click to expand...
Click to collapse
odd, the latest drivers are 4.8.2345.0 and these were installed a week before Mango was released to prepare the phones for Mango. Not sure why it would give you an older USB driver....
I updated the USB driver but the problem stays the same, not sure what else could be done
derausgewanderte said:
sounds like a USB driver issue.
open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0
if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.
Click to expand...
Click to collapse
I'm been have the same problem with a samsung focus v1.3, i've tried everthing i could find, but nothing worked. I hope someone has an answer to what causing this.
I've reflashed the phone with both the rogers and at&t roms(many times) but can only get to 7403.
Also i have tried 4 different computers, one was ever XP.
i am getting the same update error with my Branded HTC HD7
Same error Omnia 7.
Posted it at MS forums: http://answers.microsoft.com/en-us/...-omnia-7/779a50b6-2080-40da-b106-c8b365c25372
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
DesiChoza said:
Same error Omnia 7.
Posted it at MS forums:
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
Click to expand...
Click to collapse
how did u revert back to 7392 update and which registry settings did you tweaked? would u mind sharing it with us? i have done hard reset on my phone but the os version is still 7.0.7043 and since i reset, there is no backup in zune to revert
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Try This?
fouros said:
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Click to expand...
Click to collapse
Not to be insulting, but did you try the Walsh Tool and select ALL languages that are on your phone. Most people who have gotten to the end of the MANGO update and failed with this error code fixed this with the Walsh Tool. Please don't dismiss it out of hand, it has solved this error code issue with a lot of people.
JamesAllen said:
Not to be insulting, but did you try the Walsh Tool and select ALL languages that are on your phone. Most people who have gotten to the end of the MANGO update and failed with this error code fixed this with the Walsh Tool. Please don't dismiss it out of hand, it has solved this error code issue with a lot of people.
Click to expand...
Click to collapse
i am not insuted and yes i did use the Walsh tool with the program saying my HD7 was not in a walshed state
pretty confused at the moment on what next to try
DesiChoza said:
Same error Omnia 7.
Posted it at MS forums:
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
Click to expand...
Click to collapse
Could you please elaborate?
Just to add to this, my brother inlaws focus, which i flashed with the rogers rom(It was a gift), installed the mango update yesterday morning. His phone is identical to mine.
fouros said:
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Click to expand...
Click to collapse
I am now on Mango
i had to use another telstra ROM for the HD7
http://forum.xda-developers.com/showthread.php?t=993186
installed this , forced update and now Mango tastes sweet
Hey guys, hope all is well..
I've made a complete 'pickle' out of my HTC Trophy (Vodafone NZ - Unbranded)..
I was happily using Ansar's europe Mango rom found from these forums for a couple of weeks only to notice that a few key features were not working, Local Scout would not identify anything in my country and Bing song recognition was not visible =/..
I had been given word that the official NZ rom had finally been released through Zune so I (Foolishly) thought it was as simple as flashing with the Vodafone NZ NoDo rom (Also found here by Ansar) and attempting to update the firmware through Zune as usual.. Boy was I wrong..
After the flash had been done, I noticed through Zune that the actual image of the device shown was not my Trophy.. It said 'HTC Trophy'.. But the image wasn't.. I chose to ignore that and attempt to update the firmware, it happily updated right up to 7403, but the following update from this (I assumed Mango) bounced back with the error 80180048..
I've looked through every possible source of knowledge on the net which led nowhere (Even attempted the unwalshing tool but it advised me my device wasn't walshed).. So I'm pretty much stumped.
If anyone at all can help me, I will have your babies..
=P
MVP
EDIT - If it means anything, The moment it goes to install the new firmware to the device that USB message pops up on my computer (Win 7) saying that the performance would be a lot better if I plugged it into a USB 2.0 port (Obviously it is..)
Also, on all the previous updates I get a status bar on the phone of how far through the update it is, when it is updating this last firmware I don't get this status bar, it just sits on the same image of the phone and pc with a crossed out arrow in the middle for about 10 minutes then reboots with the above error message
When i try update my phone on preview for developers, i have problem and error 80188301. Uptade was downloaded but not openned. How can i fix it. Please help me. (Sorry my english)
Did you reflash your phone after a windows 10 update? I'm trying to find out if microsoft stopped all updates to htc 8x or if the roms found on the internet are broken. The cortana update used to work, but not getting it now.
Error 80188301 after Recovery from Windows Phone 10
Same Problem here with my HTC 8x: I had the "accidential" Windows 10 Phone-Preview installed, but caught in that "reboot-loop". After going back to 8.1 with the Windows Phone Recovery Tool today, I installed the Developer Preview App again and searched for updates. Update was found, but Installation fails with error 80188301. And not a single word from Microsoft... tss, tss, ...
Is there any solution for this problem??