Hi,
I tried to upgrade my Qtek S200 with the newest ROM release from PdaMobiz (the 16M pooling page one), but encountered some problems...
It's a Portuguese TMN Qtek (or at least it displays the operator logo when started), although the software is in English.
IPL is 2.09 and SPL is 2.15...
However, after upgrading it, it kept displaying the Operator logo with IPL and SPL, and freezed, so it never worked. When I tried to revert it, I wasn't able to do it, because every time I try to install a different ROM (all of them for the G3 device) it just installs the new ROM, and then goes to that screen and freezes...
It never gave me any error during the upgrading/downgrading, because when it checks the version of the ROM, it displays no information, so it just says that is going to replace the inexistant version with the new one...
Is there a step a missed (I didn't put it in bootloader mode before doing the first upgrade, but I had already done that before with other ROMs and it worked fine...)?
Now I'm stuck without knowing if I should have done an unlock CID before upgrading it, or if there is another steped I missed... Please help me out...
Thanks in advance,
Nuno
Tried this?
Read this in one of the threads and it solved his problem:
Extract the rom file you are using to flash your phone, to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility-NoVendorID.zip") into this folder. than connect your phone to pc and double click on "ROMUpdateUtility-NoVendorID.exe".
I personally have not tried it, but I downloaded the prog just in case, Hope it helps.
Now it gives me an error...
Hi,
Just tried what you advised, but now it jusk keeps giving me the error 208, which is supposed to happen because I have other programs open on my computer... Tried rebooting, closing most aplications with task manager, and still it doesn't work.
Also tried to downgrade to lower ROM upgrade, but it gives me the error that I can't downgrade, only upgrade...
When I upgrade it with AKU 2.3, it goes all the way through the upgrade, and then when it reboots, it just keeps giving me the operator logo screen with the version info on the display.
If I try to reboot to bootloader mode, I'm not able, the only way to do it is by removing the battery...
I'm probably still doing something I shouldn't... It should be able to work the downgrade utility...
Anyone can help?
Thanks,
Nuno
Try this rom:
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
It shoud be ok.
If your prophet has spl end up with 2.xx.0001 check at
ftp://xda:[email protected]/Uploads/Prophet/
find out the rom which can solve for SPL 2.xx.0001.
Good luck
Thanks Chan! Problem solved!
I was starting to review all my steps ir order to see what I could have done wrong...
Would you advise me to upgrade now to the PDAMobiz latest ROM (the one with the biggest pooling page)?
Thanks again.
Nuno
1. Unlock cid
Since your prophet spl is 2.15, you have to follow this step.
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437
From file you can get from ftp://xda:[email protected]/Uploads/Prophet/
Your PC has to connect to network or internet (to have ip address), becuase in that script use ping command for delay 4 seconds.
It's just downgrade and unlock cid.
You may verify if cid unlocked, by backup rom to sd card. (use romupdate.exe with r2sd all command, check at wiki)
2. Upgrade to official rom
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. Upgade to pdamobiz, I suggest you to upgrade 12 Mb pagepool version. (even 8 mb version is ok). Because 16 mb has smallest ram space.
Good luck
All solved!
Again,
Thank you very much for your help!
After some tries, upgrading, downgrading, upgrading again, etc, I finally got it, so now its running the PDAMobiz version, which by the way, seems great so far!
Next time I'll come to you directly and then try to make things on my own...
Thanks again!
Nuno Eça
Please please please, sum 1 here can be kind enuf 2 help with my problem.After installing wm5 finding lots of issues tried to downgrade to 2003se and now stuck woth spl 2.5.0105, no os and only bootloader with no iu mode. i tried mtty but give error not allow operation!! and try to typhoonnbftools but says no immediate flash available. I also try to use ruu patched 1010064 spl / 1.01.0109 but to no avail. I am DESPERATE for a solution to this as I just need my phone workin again. I also try to use psdwrite but dont know/understand proper commands as I have official ROM from imate site and would like to know if possible to load this onto SD card or sumthn?
Okay I want windows mobile 6. Whatever reliable working version I can get. I need to apparently unlock the CID and Sim unlock the phone? Carrier is T-mobile. I'm not new to registries, etc. I created my own Iphone theme even so I'm not new to hacking a phones appearance, but everything else like flashing, etc. I'm good at figuring things out though.
But I reviewed multiple threads and just don't get it, which one do I use?
So if anyone can help me out, please do. I have all the roms for the new 6.5 and all that but the only thing is NONE are english or say what version itll change to, etc. Any help is appreciated.
===========================
I have:
G3
IPL 1.08
SPL 1.08
GSM 1.09.10
OS 1.8.10.2
Windows Mobile Version 5.0
Windows OS 5.1.70 (Build 14410.1.1.3)
Processor: OMAP850-195MHz
==============================
http://forum.xda-developers.com/showthread.php?p=3581108#post3581108
Also, your IP/SP are VERY old. You may experience problems with using newer ROMS (such as the latest 6.5 builds). Not saying it's doomed to failure, just saying don't expect miracles.
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
You may have corrupted your DOC, you may need to use mtty to reformat it. Do some searching on how to do it.
Or try to use T750URT.exe to restore it, it comes with the Treo desktop updater.
similar problem
Hey guys,
After I flashed a WM6.5 costum ROM in my treo750 it works fine...until 4 hour after...the display just stay black. It´s on, but black!!
I´ve tryed reset, hard reset and force to reflashed to an original WM5.0 without success.
Does anyone know what is happening with my phone??
Thanks
Can anyone please help me I have tried to upgarde My Loox N560 to
WM6 but It just switches of the connection. I've done a factory reset
but still no luck. I have not put a password on this device.
The device flashes and then a dolphin sceen appears with 2.14.G4
2.15 on it.
Error opening the USB Port
comes up on the downloader
what am I doing wrong?
regrads
hudsoft
Hudsoft said:
what am I doing wrong?
regrads
hudsoft
Click to expand...
Click to collapse
I think that the answer is pretty obvious..........first of all " you bought a loox 560. Pretty cool in 2006 but............
Secondly , I don't think a WM 6 upgrade was ever released for that phone. Any WM 6.0 upgrades you find here will not work because upgrades are very device specific.
Lastly, that phone is not supported on this site, so any help will be minimal and generic or not forthcoming at all.