Samsung Captivate has been on sbl.bin while running ODIN3EXECUTION 1.00 for the past 10 minutes. Hoping I haven't screwed myself. I have to send the phone back to Samsung so I wanted to make sure that it was running complete stock since I rooted and deleted the Mobile AP app and such.
How long does ODIN take on this? :\
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Sbl.bin
_________________
Related
Hello,
My Galaxy S3 has a broken screen and i need to send it back to get fixed. At the same time my phone now always boots into safe mode and no apps apart from the core ones work.
So in have tried to flash the rom (SPH-D700-EC05-8gb-REL.tar)with Odin 1.87 and i always get the below without fail. On the screen of my phone the blue bar appears but at 100%.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
I have also tried to use the pit files but these always fail too using - GT-I9300_mx_20120329.pit or victory_8G_100528.pit
I purchase a brand new thick blackberry cable for this.
Please help
As the title says i messed up my tablet badly and i know think i have a way to fix it. The only problem being is that odin is not working for me it shows up in odin but when i start it gives me this:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
and stays there and the blue progress bar never shows up on odin or my tablet
PLEASE help you guys are my last hope.
Try download firmware again.
Sent from my SM-N920C using XDA-Developers mobile app
JJEgan said:
Try download firmware again.
Sent from my SM-N920C using
Click to expand...
Click to collapse
I already tried that and upgrading to v3.11
Try Odin v 3.185
JJEgan said:
Try Odin v 3.185
Click to expand...
Click to collapse
it gets stuck at:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
And the blue bar shows up but its shows it full
So I softbricked my phone by messing up during rooting it with Odin.
Now when I try to stock flash using Odin, this error shows up
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware is correct, it's SM-G920W8 from Bell, it's the latest version of Odin, and I've tried so many things but it just says FAIL each time.
When I exit download mode, via battery pull, it the booting screen starts up, then it just goes black. Additionally, in the top left corner, it says: Kernel is not Seandroid reinforcing.
Smartswitch also doesnt work as the emergency function wont recognize my phone
Thanks
Ok,
So I am trying to fix my dads phone which stopped working over the weekend and am at a total loss. The phone will ONLY boot into odin download mode. You can turn it on normally, can't get into recovery mode. I have already tried to flash the lastest stock TAR via odin and it installs fine, except nothing changes, still no recovery or boot.
OS I installed: G920PVPS4DQE2_G920PSPT4DQE2_G920PVPS4DQE2_HOME.tar .md5
ODIN Report
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Have tried Vol - & Power to simulate battery pull and then quickly pressing Vol + & Power to enter recovery ? A customer gave me an G920P too with the same problem but wasnt able to boot in anyway, i believe G92XP firmwares are bad in some way
Nope, can only get into ODIN. Repetedly went into ODIN mode and completely drained the battery and then did a full charge, still nothing.
Hey guys,
I had an issues yesterday that have forced me to get the original firmware and reinstall it but it won't work end of story phone is in odin mode odin 3.12.3 seems stuck here's my Odin log
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
it's been like that since 1am this morning and odin just says "Set Partition" at the top anyone know what's happening?
EDIT: Download mode just came up with VBMETA:ERROR verifing VB META VBMETA: no sign info
Fixxed
This was resolved using odin 3.13.1