Related
Would someone be able to supply me with the APN settings for my Galaxy S 4g? This idiot just deleted his. I thought something was wrong with my phone because I had lost all ability to use packet data over anything but Wi-Fi. So while troubleshooting I deleted the default without backing it up. I did figure out why I lost data though. Did you know T-Mobile expects you to pay them EVERY month? The wife thought I paid it and I thought she had.
It's paid now, but I can't find anything here or on google that references that they are specifically for SGS4G. Does it matter? Can I use any?
BTW, if anyone knows any alternate config for APN that claims improved speeds I may as well use those. Never wanted to before because I'm satisfied with my speed, but since I'm adding them back....
Have you tried reseting APN to defaults?
Press the Menu Key
Tap on Settings
Tap on Wireless and network
Tap on Mobile networks
Tap on Access point names
Press the Menu Key and tap on Reset to Default
Don't know if that will work for ya... but other than that you have to call tmobile/yourmobilecarrier to get the settings.
T-Money said:
Would someone be able to supply me with the APN settings for my Galaxy S 4g? This idiot just deleted his. I thought something was wrong with my phone because I had lost all ability to use packet data over anything but Wi-Fi. So while troubleshooting I deleted the default without backing it up. I did figure out why I lost data though. Did you know T-Mobile expects you to pay them EVERY month? The wife thought I paid it and I thought she had.
It's paid now, but I can't find anything here or on google that references that they are specifically for SGS4G. Does it matter? Can I use any?
BTW, if anyone knows any alternate config for APN that claims improved speeds I may as well use those. Never wanted to before because I'm satisfied with my speed, but since I'm adding them back....
Click to expand...
Click to collapse
I'm not at my computer right now. But go to the vibrant section and look for the think tank removing data throttle thread. Or Google T-Mobile apn settings and manually enter them on the phone.
Sent from my GT-I9000 using XDA Premium App
I'm Good Now
Thanks to golmar n blackphnx for the reply, I had googled and found some before posting, but wasn't sure if I it was one size fits all. I tried what you suggested Golmar and it worked except I needed to take a couple more steps beyond your post. You got me in the right direction though. If any other boneheads ever does the same as me, follow the below:
1. Follow steps given by Golmar in post 2 to get to your APN settings but you won't have restore defaults when selecting menu (system won't let you if you do not have any APN. Only can choose to create a new one or cancel from the pop up)
2. What you will see if you have no APN stored is it goes directly to a dialogue asking if you want to create a new one or cancel. Say yes and you get a full form asking for all the detailed APN info (If you say no/cancel it exits back to the previous menu).
3. Enter Name (doesn't matter what) and then epc.tmobile.com in the APN field don't know if you need APN, but I put it in.
4. Now, when you select menu you will have option to Save or Discard. Select Save.
5. Saving brings you to the screen you normally would see to select default APN or another one if you had created. (If you just went through these steps you should see just 1 named whatever you entered in step 3.)
6. At this point you can select menu and choose to restore defaults. Your default APN will return and the dummy just created will be removed.
Good to know!
Hello i just recently got a new Optimus V Slider from Virgin. I have tried everything i know possible to get the MSL code out of this thing to no avail. I have tried the method that is used with the Reg Optimus V using CDMA Workshop and no matter what driver is used the workshop will not connect ot the com. I have also tried using getprop ril.MSL, all i get from that is a blank line.
Can someone please Help me get my MSL code.
Still trying to solve this issue
Just call tech support. Tell them you are a developer and need the code. If it doesn't work call back and get someone else.
This method works for the Motorola Triumph on VM, might be worth a try here.
1) Download aLogcat from the Market.
2) Press Menu and choose "Filter." Type in "SEC_CODE" without the quote marks.
3) Press Home. Go to your dialer and enter ##33284#.
4) You'll be prompted for your MSL. Enter 000000.
5) Now go back to aLogcat and the six-digit number showing after SEC_CODE: is your MSL.
sarcasmsiempre said:
This method works for the Motorola Triumph on VM, might be worth a try here.
1) Download aLogcat from the Market.
2) Press Menu and choose "Filter." Type in "SEC_CODE" without the quote marks.
3) Press Home. Go to your dialer and enter ##33284#.
4) You'll be prompted for your MSL. Enter 000000.
5) Now go back to aLogcat and the six-digit number showing after SEC_CODE: is your MSL.
Click to expand...
Click to collapse
this method also does not currently work for the Slider.
yes it does work.
rexxcastle said:
this method also does not currently work for the Slider.
Click to expand...
Click to collapse
download alogcat 2.3 from market and follow those directions but instead of putting a filter just scroll up and you should see D/SpecialCharSequenceMgr( 304): MSL=000000
marley183rd said:
download alogcat 2.3 from market and follow those directions but instead of putting a filter just scroll up and you should see D/SpecialCharSequenceMgr( 304): MSL=000000
Click to expand...
Click to collapse
Hi, I'm trying this now, but it's hard to find it in all of this information logcat is outputting. is there a filter that i could set?
-edit-
just looked through the whole thing again after a reeboot(the log was shorter) and there's no instance of " D/SpecialCharSequenceMgr"
Laserbeak43 said:
Hi, I'm trying this now, but it's hard to find it in all of this information logcat is outputting. is there a filter that i could set?
-edit-
just looked through the whole thing again after a reeboot(the log was shorter) and there's no instance of " D/SpecialCharSequenceMgr"
Click to expand...
Click to collapse
just type in msl in filter lol
MSL code for Virgin Mobile LG Optimus Slider
flipinfin said:
just type in msl in filter lol
Click to expand...
Click to collapse
Just typing in MSL in the filter doesn't do squat. Ive tried it on my fiance's phone for the last two days and have got nothing.
Methods I've tried:
1. MSL Reader.apk- This was no-fu-go
2. Logcat.apk - Still havent seen anything pertinent on this app
3. Alogcat.apk - Havent seen any msl numbers or spc numbers.
4. Tried the usual 000000 when entering the MSL. - No-Fu-Go.
Tomorrow I am going to barage Virgin Mobile with phone calls and try to get the MSL for the phone and see how things go. I'm very doubtful they will give it up easily but I'll give it a try and let you all know how it goes. If anybody has any advice let me know please. I would greatly appreciate it and wouldnt mind donating beer money etc for a method that works. Lol. Any help greatly appreciated with this dumb smart phone lol.
[EDIT] I called Virgin Mobile and talked with Supervisors and their supervisors. They WILL NOT give out MSL codes for phones. You may have to contact the manufacturer of the phone in order to get the MSL for the phone. That's what they suggested to me. LOL! Virgin Mobile sucks ass!
For what it is worth, you can get the MSL pretty easily, but it requires using a tool to read the phone while in diagnostic mode like CDMA Workshop
THIS METHOD IS DEPENDANT OF THE TOWERS NEAR YOU. PLEASE READ THE END OF THIS POST TO SEE A QUOTE FROM LEADPOIZON ABOUT THIS.
Alright, after searching time and time again. Trying time and time again... And Failing time and time again... (jejeje) I was finally successful at sending multiple messages through the HTC Arrive... I feel so stupid for not trying this as one of the first things but hey... You gotta deal with your own stupidity at times ... jejeje.
Anyway, what you guys have been waiting for...
HOW TO REMOVE THE 160 CHARACTER SMS LIMIT ON WP7
(I can only try this on the HTC Arrive as I do NOT have any other WP7 device)
I HAVE TESTED THIS ON ANSAR's CUSTOM ROM'S (16.04 TANGO V1 8773) DFT's CUSTOM ROM (Freedom V1) LEADPOIZONS ROMS (ALREADY INCLUDED IN SETTINGS ON BOTH 7.5 AND 7.8 ROMS) SIANTOS ROM (WP7.8 ALL)
BUT AS OF NOW, ITS DEPENDANT ON THE COMMUNICATION TOWERS NEAR YOU
Use the included REGISTRY EDITOR on EITHER ROM's to edit entree:
1.) Go to HKLM\Comm\Cellular\SMS\Router\CDMA and change the Contantenation entry from a 0 to a 1
2.)Select the EXIT from the Registry Editor
3.) Go to your text messages and try to send a 161+ character text message to YOURSELF
DEPENDING ON YOUR LOCATION, YOU MAY RECEIVE THE MULTIPLE MESSAGE... IF YOU DONT, CONTINUE TO HOPEFULLY TROUBLESHOOT
4.) REBOOT YOUR PHONE!!!
5.) Once your phone is back up, go back to the text hub and click on RETRY SEND to send the text message.(This message will leave this time with no response from the Messaging App.)
***WAIT A MINUTE OR TWO TO RECEIVE THE MESSAGE, IF YOU DONT RECEIVE THEN FOLLOW THE NEXT STEP***
6.) Go back to your text hub and TYPE A NEW 161+ character message and try to send yourself again. This time you should receive 2+ messages after going through the network.
You can combine this tweak with my unlimited MMS size tweak and you are good to go!!! You can now have unlimited SMS characters and MMS size... jejeje
(For the MMS post, go here: http://forum.xda-developers.com/showthread.php?t=1606865 )
THERE YOU GO... 160+SMS MESSAGE IS POSSIBLE THROUGH WP7... HTC ARRIVE... THANKS GO OUT TO ANSAR AND DFT FOR THE ROMS AND A SPECIAL THANKS TO LEADPOIZON FOR ALL THE HELP.
`-`-`-`-`-`UPDATE REGARDING THE COMM TOWERS, IF YOU HAVE ISSUES, PLEASE READ`-`-`-`-`-`
SINCE THERE HAVE BEEN DIFFERENT SUCCESS STORIES/FAILURES WITH THIS TWEAK WE HAVE BEEN PURSUING A "GLOBAL" FIX... JEJEJE. AFTER MUCH TESTING, LEADPOIZON CAME UP WITH WHAT WE THINK MAY BE FINAL RESULTS...
leadpoizon said:
MY FINAL RESULTS:
This method is dependent on the towers near you, because of the following*:
Some Mobile Phone Operating Systems are designed to split up texts whens they are sent over the 160 character limit before they are sent to the network (even dumb phones can do this). Windows Phone does not seem to have this capability, it sends your message in its' entirety to the network and hopes that the network can sort it out into split texts. The problem is, not all Sprint towers seem to support this. For that reason, Sprint completely disabled the option to send a text over 160 characters.
When you know this method will work**:
1. Make the registry Edit (Reboots is not really needed, WP dynamically monitors the registry, it seems.)
2. Send yourself a text over the 160 characters. (It should allow you to after the registry edit.)
3. The text will give you an error either instantly or in a few minutes.
4. Reboot, if you want (just to be sure.). Then, resend the same text.
5. It will send without errors and you should receive the content back in more than one text. Done.
When you know this method will NOT work**:
1. Make the registry Edit (Reboots is not really needed, WP dynamically monitors the registry, it seems.)
2. Send yourself a text over the 160 characters. (It should allow you to after the registry edit.)
3. The text will not give you an error. After a LONG time (an hour or so, you will get the error.)
4. During the time between you sending the text and receiving the error, your MMS and SMS will be broken and you most likely will not receive or be able to send texts.
5. Reboot your phone and things should be back to normal. Change the registry back to default value to avoid making an accidental text over 160 characters. Go yell at MS and Sprint.
* Only speculation after my trials
** YMMV
Click to expand...
Click to collapse
I've tried this registry key before without success, but I tried your directions anyway. I'm running the DFT Freedom ROM, but I never get the first "can't send" message. After rebooting, I can send texts like normal until I try to send one that is 161+ characters long. Then all messages fail to send, regardless of length until I reboot again. There has to be some other setting or registry key change that you have which, in combination with he CDMAConcatenation entry, allows it to work on your handset. I believe you did it, we just need to figure out what the magic combination is!
dandrayan said:
I've tried this registry key before without success, but I tried your directions anyway. I'm running the DFT Freedom ROM, but I never get the first "can't send" message. After rebooting, I can send texts like normal until I try to send one that is 161+ characters long. Then all messages fail to send, regardless of length until I reboot again. There has to be some other setting or registry key change that you have which, in combination with he CDMAConcatenation entry, allows it to work on your handset. I believe you did it, we just need to figure out what the magic combination is!
Click to expand...
Click to collapse
I would agree with you except that I have reset the phone (Even FULL FACTORY RESET WITH ANSAR's)... Flashed to DFT and tried it, then flashed back into ANSAR's rom and tried it again... It worked when I did exactly the top... For some reason... I litteraly made this the ONLY edit on those ROM's to ensure it worked... and it did...
EDIT 1: And you did follow to the letter correct? No other texts until the process was done? I am currently downloading a STOCK ROM... I will flash to it and try, then I will flash back and report my findings... Again, as of now, I have been able to follow the directions I have posted and been successful 100% of the times...
I can't follow to the letter because I never get the "can't send" message. Otherwise, yes, I've followed the instructions exactly. No other texts incoming or outgoing besides the ones in your instructions.
I wonder if it's dependent on a setting at the tower or on the account within Sprint's systems that allows this?
dandrayan said:
I can't follow to the letter because I never get the "can't send" message. Otherwise, yes, I've followed the instructions exactly. No other texts incoming or outgoing besides the ones in your instructions.
I wonder if it's dependent on a setting at the tower or on the account within Sprint's systems that allows this?
Click to expand...
Click to collapse
I was thinking thesame thing... to an extent... You know how Microsoft was resetting devices as they were being unlocked? That is, once you synched with their server, your unlock would be gone...
When I first tried this it did not work... I gave up that day and came back to it yesterday... I have to say that the tweak was in my system for at least 24hrs... maybe there is something that has now bypassed this on MY particular account? I dont know...
Also: I just flashed a stock (Well not unlocked/tweaked/or anything) ROM and did a full factory reset, then I updated my PROFILE and PRL just to make sure that no settings were left on the phone from the previous flash. I then proceeded to flash the DFT ROM and all I had to do was the registry edit, when I went to the messaging... I sent the 161+ sms...
I dont know... Id have to say something flicked the switch... on one side or the other... Would you mind checking tomorrow throughout the day to see if this may be the issue...
If this is the issue, it makes sense why nobody had found it yet, they did the edit and did not let it get "registered" in their phone??? jejeje... Too many questions... jejeje
Interesting theory. I'll keep the setting on and try again tomorrow to see if there is any change. Thanks for the help!
Worked on my Ansar 8773 V1 install! Thanks! Only complaint I had with this phone up to now.
atm153 said:
Worked on my Ansar 8773 V1 install! Thanks! Only complaint I had with this phone up to now.
Click to expand...
Click to collapse
AWESOME!!! Glad it worked for you...
mapaz04 said:
AWESOME!!! Glad it worked for you...
Click to expand...
Click to collapse
Yeah, I just wish I knew why it wasn't working for dandrayan. Not enough to flash DFT Freedom to my Arrive though
Thanks Man. It worked for me without rebooting on dft. I made the change, and tried to send a 161 test to myself. It sent fine with no error and I received both texts within a minute. Thanks!
Awesome work! Now to release a ROM.
Cant wait to see what you bring to the table man! Thanks again.
I'm using the Ansar v1 rom and this reg edit doesn't work for me. Does it depend on area? I'm in the north jersey. When I try to send a message to myself longer than 160+ characters, I either get no reply whatsoever or I get the following error "can't send message Try again".
Any suggestions? I tried rebooting.. updating prl.. updating network profile.. doesn't work for me.
spydc said:
I'm using the Ansar v1 rom and this reg edit doesn't work for me. Does it depend on area? I'm in the north jersey. When I try to send a message to myself longer than 160+ characters, I either get no reply whatsoever or I get the following error "can't send message Try again".
Any suggestions? I tried rebooting.. updating prl.. updating network profile.. doesn't work for me.
Click to expand...
Click to collapse
when u get this msg...
1.) REBOOT the phone.
2.) Go back to sms and click retry... it should go but no response for a while...
3.) type new 161+ sms and send to yourself again.
Let me know.
EDIT: And I know you probably have tried this but just give it a shot again... Also, go back to the registry and re-edit the string, save again and click MENU then EXIT to leave the application. REBOOT and try to re-send
mapaz04 said:
when u get this msg...
1.) REBOOT the phone.
2.) Go back to sms and click retry... it should go but no response for a while...
3.) type new 161+ sms and send to yourself again.
Let me know.
EDIT: And I know you probably have tried this but just give it a shot again... Also, go back to the registry and re-edit the string, save again and click MENU then EXIT to leave the application. REBOOT and try to re-send
Click to expand...
Click to collapse
I was able to reproduce this only once and with a few tries and only when texting myself. Do you have this working completely after this edit and are able to send others texts?
Been texting like crazy man...
leadpoizon said:
I was able to reproduce this only once and with a few tries and only when texting myself. Do you have this working completely after this edit and are able to send others texts?
Click to expand...
Click to collapse
Yep, ive been texting more now that the limit is gone... I dont have to worry about my limit being reached... So ive been sending multiple part messages to everyone... jejeje
Anyway, to be safe and to hold some proof (not that I need it... jejeje) here is a picture of my HTC Arrive (left) and my wife's Evo 3D (right). I sent a 3 part message and she received every one of the pieces... I made sure my phone had nothing on it (yes, reset it AGAIN... jejeje) as you can still see the RED accent color... jejeje...
mapaz04 said:
Yep, ive been texting more now that the limit is gone... I dont have to worry about my limit being reached... So ive been sending multiple part messages to everyone... jejeje
Anyway, to be safe and to hold some proof (not that I need it... jejeje) here is a picture of my HTC Arrive (left) and my wife's Evo 3D (right). I sent a 3 part message and she received every one of the pieces... I made sure my phone had nothing on it (yes, reset it AGAIN... jejeje) as you can still see the RED accent color... jejeje...
Click to expand...
Click to collapse
Cool, thanks. There must be some reason why I can't get it to work.
Time to find out why... Did you have to do that procedure after you reset the device to factory settings, or did you just do the registry change and that was it?
leadpoizon said:
Cool, thanks. There must be some reason why I can't get it to work.
Time to find out why... Did you have to do that procedure after you reset the device to factory settings, or did you just do the registry change and that was it?
Click to expand...
Click to collapse
Just went to the REGISTRY and changed it... That was it. Didnt have to do the procedure after the first couple of times that I tried it... I do have to say that whe I try it I do it with a CLEAN INSTALL... I dont know if that is the difference in my success since I flash the ROM squeaky clean and do the edit from the beginning (since I have been testing didnt want something else to mess with this...)
Dont know what is the issue... Some people have reported to be working fine, others are having issues... hmmm... dunno what to say at this time...
mapaz04 said:
Just went to the REGISTRY and changed it... That was it. Didnt have to do the procedure after the first couple of times that I tried it... I do have to say that whe I try it I do it with a CLEAN INSTALL... I dont know if that is the difference in my success since I flash the ROM squeaky clean and do the edit from the beginning (since I have been testing didnt want something else to mess with this...)
Dont know what is the issue... Some people have reported to be working fine, others are having issues... hmmm... dunno what to say at this time...
Click to expand...
Click to collapse
I wonder if this has to do with what plan people have... Like, I don't pay the $10 data charge. I wonder if that has anything to do with it.
leadpoizon said:
I wonder if this has to do with what plan people have... Like, I don't pay the $10 data charge. I wonder if that has anything to do with it.
Click to expand...
Click to collapse
Now, I did have issues at the beginning while trying to make this work... However, once it worked, it seems that it has not stopped working...
And I DO pay the $10 for data so... that MAY be something to look into...
a while ago i was tinkering around with my phone, unrooted and if i entered a certain number combo into the dialer i was brought to a bunch of settings, one was to change dns and ip settings. i lost all my pc browsing data, (a stupid mistake) and i cant remember the number combo. if anyone knows please let me know.
samuelrp1998 said:
a while ago i was tinkering around with my phone, unrooted and if i entered a certain number combo into the dialer i was brought to a bunch of settings, one was to change dns and ip settings. i lost all my pc browsing data, (a stupid mistake) and i cant remember the number combo. if anyone knows please let me know.
Click to expand...
Click to collapse
*#*#INFO#*#*
You mean that?
also, wrong section
Do you mean this? *#*#4636#*#*
Haha. I just realized that 4636=INFO
grigri444 said:
Do you mean this? *#*#4636#*#*
Haha. I just realized that 4636=INFO
Click to expand...
Click to collapse
its easier to memorize with INFO=p
and this is in the dev section because?
samuelrp1998 said:
a while ago i was tinkering around with my phone, unrooted and if i entered a certain number combo into the dialer i was brought to a bunch of settings, one was to change dns and ip settings. i lost all my pc browsing data, (a stupid mistake) and i cant remember the number combo. if anyone knows please let me know.
Click to expand...
Click to collapse
can't help with dialer codes, but why not use shabby's 7.2 tool to root and install custom recovery, then flash a stock image to reset everything for you. You can always return to stock if that's your style
This will be the place holder on the procedure to flash the Samsung Galaxy Note 2 to Boost Mobile.
In regards to respect and response to Trim**
If you brick your phone, it is not my fault. I will not take any liability for your stupidity; and lack of patience. If you want to make a donation to my
fund, then I might be able to help you.
Please have patience and understand the concept on which I will explain to you.
Tools:
--------------------------------------------------------------------------------------------------------------
4 hours or less depending on your willingness to read the manual in its entireity (and the ability to overlook spelling and grammar errrrors)
WINDOWS XP PRO with dot net 4.1 and service pack 3
If you do not understand the terms of this paper you should stop immediately and seek professional help or spend another 2 hours learning the terms
The members I menitioned above are responsible for the research and if you lookup there posts you will find the files!!!
SAMSUNG DRIVERS FOR YOUR PHONE
Snagit / or you will need to manually copy the screen shots.
ODin3 v1.85
The factory ROM sph-l900_spr_L900VPALJ1_L900SPTALJ1_Original.zip (file name you need to download from reputable source)
GalaxyNote2RootSprint.zip
RootExplorer.apk
BusyBOX
2 boost mobile phones (in case you f**kup you can revert back without calling boostmobile)
My donors were a incognito and a samsung factor (incognito was donor, factor was there to fix error 16)
DFS 4.0.1.1
CDMA workshop 2.7
QPST 378
QXDM 03.09.19
------------------------------------------------------------------------------------------------------------------
Tip 1: Root your phone so you can find the MSL!
Flash the GalaxyNote2RootSprint.zip file as it is VERY important that later on you will need root privelleges to remove spy software.
Look it up as I could easily take up 2 pages of writing to answer how to root your phone, so to keep it simple... Read up using the files I
explained above within the tools section.
Tip 2: Reset the phone everytime you f**k up. Do not proceed if you mess up. START OVER!!!!
go to dialpad and type in ##786#
Tip 2: Create the template:
Gather your (SPC/MSLD, MEID, DEC, ESN, PRL, and CAVE if possible) put them into a notepad.
Tip 3: This is no way even close to how you flash an EVO! So don't go looking at that method as it will mess you up.
Tip 4: Never change your MEID until last!!! If you do it before, your phone will reboot and you will be locked out again!
Tip 5: 32bit passwords are BS and they seem to change each time you switch phones, so do not think they are the same as it takes 20 minutes before boost
unlocks your account for the next / new phone to even browse.
Now without further delay lets begin.
---------------------------------------------------Galaxy Note II L900 Flash from sprint to boost manual -------------------------------------
----------------------------------------------------------Donor Segment ---------------------------------------------
Install DFS, QPST, QXDM and workshop 2.7
Get your sanyo incognito (donor) <--- I hate all others, and copy NV items 465,466,1192,1194, then copy NAM1, and NAM2 using workshop 2.7. Make sure you put
the code of SPC in as it will not work in regards to copying the NV items and NAMs mentioned earlier.
Go to DFS and connect the Donor to the proper port and take screen shots of all sub tabs under the programming tab below. Remember to send the password and
passcode so that you can gather all info without delay.
Now type go into QPST and service and programming and connect your phone there as well and take screen shots of all infor there and label accordingly.
-Now if you did everything above you have all you need and you now may turn off the donor and pull battery out and store it. Never turn it back on again!!
---------------------------------------------------------End Donor Segment -----------------------------------
----------------------------------------------Begin Flash -------------------------------------
Now connect your Galaxy Note II L900 (L900) and type *#PATI#
Now unplug the USB from the computer and plug it back in. (see now it should recognize properly now)
Now do the same for QPST (If you have errors connecting to QPST you need to change PRL to 61009 then something random after that but go back to 61009 after this, you can change your PRL using DFS)
Next open up DFS and then transfer all information you screen copied from the donor to your note.
Now reset using DFS
Next go into QXDM and issue these commands:
password 01F2030F5F678FF9
RequestNVItemRead meid
RequestNVItemWrite meid 0x00A00000000000 < MEID/HEX ID from donor phone
RequestNVItemRead meid
RequestNVItemRead esn
RequestNVItemRead scm
Write SCM 0x2a
Now close QXDM
Open Worshop 2.7 and apply all NV items and NAMs!
Now you are all set.
If you get error 67 please go back to DFS and rewrite the values.
Once you get it perfect you can simply stop the nagging activation codes using:
root explorer "paid version" to rename the file "/system/app/SprintSyncMLSvc.apk" to "SprintSyncMLSvc.apk.bak"
If you also want to stop the nagging system update message, just stop google framerwork services. "remember to restart when you go to google play" <-- google play depends on it.
Im reading this and had to ask a question. My gn2 was flashed only with one software dfs. I already knew my spc codes for donor and gn2 so all he had to do was read and copy. Your saying I basicly have to have many softwares to do a simple flash. The guy who did my phone is going to charge me 150 to learn how to flash to boost with that one program
Sent from my SPH-L900 using Tapatalk 2
shadricksimms said:
Im reading this and had to ask a question. My gn2 was flashed only with one software dfs. I already knew my spc codes for donor and gn2 so all he had to do was read and copy. Your saying I basicly have to have many softwares to do a simple flash. The guy who did my phone is going to charge me 150 to learn how to flash to boost with that one program
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I learned on CDMA workshop and QPST/QXDM. I do not want to get off topic; but one day you will not be able to flash; because of some simple file/security blocking you. Like those of us that use QPST/Programming learned that DFS was a better choice to use AAA vs relying on the QPST modules.
How long until the reverse happens. I recommend having both skills and if you want to learn, I can teach you for $40.00 I think $150 is a bit steep but his time is worth what he says it is, as its his life... :0)
Hey, Im having an issue with a New Samsung Galaxy Note 2 phone. Im experianced with flashing various phones.
he flash went fine for talk and text, but i have no data due to hands free activation stoping my 3g service. During the handsfree activation 3G pops up showung me my AAA keys are correct, then disappears.
I even tried disabling the sprint ML and activation apks to no avail.
Is the only way to fix this is to activate it on sprint first?
Or does anyone know of a phone code to disable the handsfree activation?
I can guarantee you you do not have evdo set
And your AAA is not correct.
The not has 2 distinctly different AAA
and only the HA is the same
Sent from my SPH-L900 using xda app-developers app
Both my Unique AAA Passwords are input correctly, and the values are correct. They work fine in both my evo 3d and Epic. But the Note without activating it once, will not let my 3g connection exist.
I also activated 3 other note 2's that were used with no problem with working LTE (3g passthru). Mines is the only new one.
hawaiideveloper said:
I can guarantee you you do not have evdo set
And your AAA is not correct.
The not has 2 distinctly different AAA
and only the HA is the same
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
This is not an evo or epic
You should have 3 passwords. I have now done 8 galaxy note 2 phones.
I like you in the past thought the same. If you look at your data settings you will see cdma
Select it and it will begin saying your password is wrong
Reason for is because it is.
Connect to your DONOR not the evo or epic phone using DFS
Then take note of profile 0 and profile 1
As well as the AAA
If you would like I can do a teamviewer session with you and get your data working.
Just PM me 1st
Sent from my SPH-L900 using xda app-developers app
Despite your 3g icon being on. Do not trust that it is the phone bluffing
Sent from my SPH-L900 using xda app-developers app
Those values are taken from my Touch Pro 2 using cdma ws. the AAA Profile 1 info from the data edit screen and my Profile 0 info from NV 1192
I just PM'ed you.
Thanks for the help.
hawaiideveloper said:
Despite your 3g icon being on. Do not trust that it is the phone bluffing
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I go into EVDO engineering and see my AAA key is passing and I've set the phone to CDMA only data mode (which used to work before for EVDO) and yet the phone only wants to stay in 1x and fail evdo authentication. I think it has something to do with the profile 1 variables or something. When I reset the phone, it disables profile 0 and pastes [email protected] into profile 1 and I can get that to connect over EVDO no problem with the 3G icon coming up, but that's just some sprint internal network with no internet access, so all I can do is hit an access denied website on the HA gateway and that's it. I have no idea why the boost mobile profile that used to work will now never connect. I've done multiple ODIN flashes and erased and restored NV and nothing...EDIT: And I've read and written NVITEMS but I'm pretty sure the necessary NVITEMS don't stick, even if you send both spc and password to phone before writing nvitems. Seriously getting out of ideas, especially since it used to work on this phone and now it doesn't.
Starting from scratch!
gotonull said:
I go into EVDO engineering and see my AAA key is passing and I've set the phone to CDMA only data mode (which used to work before for EVDO) and yet the phone only wants to stay in 1x and fail evdo authentication. I think it has something to do with the profile 1 variables or something. When I reset the phone, it disables profile 0 and pastes [email protected] into profile 1 and I can get that to connect over EVDO no problem with the 3G icon coming up, but that's just some sprint internal network with no internet access, so all I can do is hit an access denied website on the HA gateway and that's it. I have no idea why the boost mobile profile that used to work will now never connect. I've done multiple ODIN flashes and erased and restored NV and nothing...EDIT: And I've read and written NVITEMS but I'm pretty sure the necessary NVITEMS don't stick, even if you send both spc and password to phone before writing nvitems. Seriously getting out of ideas, especially since it used to work on this phone and now it doesn't.
Click to expand...
Click to collapse
Gotonull,
Simply start over and follow my instruction to the "T" and when you get stuck, you can PM me. I do recommend that you make a teamviewer session 1st then that way I can truly walk you through it.
Temporarily closing this until I get it sorted.