Database Info

Programming menus

Hey everyone. I'm one of the unfortunate ones with 3G data issues (thunderbolt wont connect to data at all).
Tried everything I could (battery+sim pull, factory restore, etc.)
Just wanted to list down all the programming/testing menus for all to have access to. A word of advise though, if you don't know what the option is, don't touch it. Some of them make sense. So this is just a place to put them all on the same post and make it easier for all to find:
1. Dial ##PROGRAM (Password is: 000000)
2. Dial *#*#4636#*#* (No password)
3. Dial ##778 (Password is: 000000)
Keep in mind *228 does NOT work on this phone, since it's SIM activated. If anyone knows of any other hidden menus, let me know, I'll edit the original post.

##debug takes you into a field trial screen.

thomascameron said:
##debug takes you into a field trial screen.
Click to expand...
Click to collapse
Cannot reproduce this.
Sent from my Eternity Infected TB

LeftyGR said:
Cannot reproduce this.
Sent from my Eternity Infected TB
Click to expand...
Click to collapse
try ##debug#

Unlock your TP2 for Free (So far Sim unlock)

I bought a used TP2 off of ebay the other day just to tinker with it. I've been playing with it for a week or so trying to unlock it, I know there is an unlocker made by Olipro/Cmonex available but I guess you have to pay for that. Although I have the Sprint TP2 and that one is Sim unlocked, but I was able to find a way to SIM lock/unlock it, I'm still trying to figure out how to turn Security off though, I mean setting Secu_Flag to 0. I I did a lot of searching but couldn't find any instructions about unlocking the TP2 for free. So here is what I found so far:
Step 1- HardSPL your TP2 (This is available for free)
Step 2- Load the following RUU rom to your TP2. It looks like this Rom when loaded to the RAM it enables some Atcmd commands that allows us to play with NV part of the ROM thus allowing us to Lock/Unlock: RUU_Signed.nbh (I couldn't post the link I need to post 8 times before I can) "mediafire.com/?n11beq12kk24hy5"
Step 3- Run the following Atcmd: (This sets the Simlock flags to 0 thus removing the Simlock:
[email protected]=0,1,code "where "code" is your MSL ( I set my MSL code to 000000 and found out that 22051978 worked too, I found this on the internet somewhere)
[email protected]=0,2,code
[email protected]=0,4,code
[email protected]=0,8,code
This only unlocks the SIM, I was able to toggle those on and Off on My Sprint TP2 without any problem. Now if only I can find the command that disables the Secu_Flag. I don't have a lot of experience with this maybe some of you guys have experience and could point me in the right direction to continue my small project I would appreciate it.

ccengineer said:
I bought a used TP2 off of ebay the other day just to tinker with it. I've been playing with it for a week or so trying to unlock it, I know there is an unlocker made by Olipro/Cmonex available but I guess you have to pay for that. Although I have the Sprint TP2 and that one is Sim unlocked, but I was able to find a way to SIM lock/unlock it, I'm still trying to figure out how to turn Security off though, I mean setting Secu_Flag to 0. I I did a lot of searching but couldn't find any instructions about unlocking the TP2 for free. So here is what I found so far:
Step 1- HardSPL your TP2 (This is available for free)
Step 2- Load the following RUU rom to your TP2. It looks like this Rom when loaded to the RAM it enables some Atcmd commands that allows us to play with NV part of the ROM thus allowing us to Lock/Unlock: RUU_Signed.nbh (I couldn't post the link I need to post 8 times before I can) "mediafire.com/?n11beq12kk24hy5"
Step 3- Run the following Atcmd: (This sets the Simlock flags to 0 thus removing the Simlock:
[email protected]=0,1,code "where "code" is your MSL ( I set my MSL code to 000000 and found out that 22051978 worked too, I found this on the internet somewhere)
[email protected]=0,2,code
[email protected]=0,4,code
[email protected]=0,8,code
This only unlocks the SIM, I was able to toggle those on and Off on My Sprint TP2 without any problem. Now if only I can find the command that disables the Secu_Flag. I don't have a lot of experience with this maybe some of you guys have experience and could point me in the right direction to continue my small project I would appreciate it.
Click to expand...
Click to collapse
so if i do this on a verizon tp2....it will sim unlock it so i can use other carriers....without costing me MONEY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

corypaul said:
so if i do this on a verizon tp2....it will sim unlock it so i can use other carriers....without costing me MONEY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Verizon is not US radio locked, so a Sim unlock should be all you need.

ccengineer said:
Verizon is not US radio locked, so a Sim unlock should be all you need.
Click to expand...
Click to collapse
so this would work on my verizon touch pro 2???

how do you issue these commands to the phone?

T_D_H said:
how do you issue these commands to the phone?
Click to expand...
Click to collapse
Hi there
Attached you will find a zip file containing two files RunATCommands.exe and result.txt. Create a new folder and unzip them to that folder.
You will also need to download pget.exe,prun.exe and pput.exe which you can find here: ( links have been blocked) in the same folder in addition to AtCmd.exe (Search for this using google)
Unzip the RunAtCommand.zip to the same folder where you saved the above p...exe files and Atcmd.exe. Make sure your phone is connected to activesync or windows mobile device center then run RunAtCommand.exe. You will have a form with a text box where you enter the AT commands you want to send to the phone. Click run command button, at the bottom you will get the result. If you are issuing a command that writes to the phone instead of just reading, and the result is 0, it's actually something like "0\r", you will have a success message too.
You might need .net framework installed on your PC too. and maybe you need to install EnableRapi.cab on your phone if you don't have it.
Let me know how it goes.

corypaul said:
so this would work on my verizon touch pro 2???
Click to expand...
Click to collapse
I don't have a Verizon TP2 phone to try it. I think it would.

ccengineer said:
I don't have a Verizon TP2 phone to try it. I think it would.
Click to expand...
Click to collapse
it dont....it only says the phone is sim unlock when turn the phone off from the software

corypaul said:
it dont....it only says the phone is sim unlock when turn the phone off from the software
Click to expand...
Click to collapse
Are you saying that you tried the above on a Verizon TP2 and it didn't work? Or are you saying that it does say the phone is Sim unlocked? What happened when you issued the at commands mentioned in the original post? Did you download pget,pput and prun and put atcmd.exe in the same folder as RunATcommands.exe?

ccengineer said:
Are you saying that you tried the above on a Verizon TP2 and it didn't work? Or are you saying that it does say the phone is Sim unlocked? What happened when you issued the at commands mentioned in the original post? Did you download pget,pput and prun and put atcmd.exe in the same folder as RunATcommands.exe?
Click to expand...
Click to collapse
yea i downloaded all of that and i issues the commands on the phone, i kept saying @SIMLOCK= 00 0 i think. Yes im saying this doesnt work, hold up wait. if you send meh that file atcmd.exe it might work. i,ve google all around and can not find itt. and i was saying if the phone is off, like in airplane mode it will say that my phone is sim unlocked
or you can email it to meh: [email protected]

corypaul said:
yea i downloaded all of that and i issues the commands on the phone, i kept saying @SIMLOCK= 00 0 i think. Yes im saying this doesnt work, hold up wait. if you send meh that file atcmd.exe it might work. i,ve google all around and can not find itt. and i was saying if the phone is off, like in airplane mode it will say that my phone is sim unlocked
Click to expand...
Click to collapse
If you don't have atcmd.exe then you don't have the basic requirements for this to work, so why are you saying it doesn't work? I'm baffled. How did you issue the commands if you don't have atcmd.exe? And how did you get back @Simlock=00 if you don't have atcmd? If you indeed got @Simlock=00 after issuing the command [email protected]?40 then your phone is sim unlocked. Try to insert a GSM sim card in it and try it. Tell me what do you get when you issue the command [email protected]?AA please.

ccengineer said:
If you don't have atcmd.exe than you don't have the basic requirements for this to work, so why are you saying it doesn't work? I'm baffled. How did you issue the commands if you don't have atcmd.exe? And how did you get back @Simlock=00 if you don't have atcmd? If you indeed got @Simlock=00 after issuing the command [email protected]?40 then your phone is sim unlocked. Try to insert a GSM sim card in it and try it. Tell me what do you get when you issue the command [email protected]?AA please.
Click to expand...
Click to collapse
ok well are you gonna tell meh where i can get the atcmd.exe file at or can you email it to meh.

i could have test this radio but i sold my spare motherboard of TP2 . but i will give it a try asap.

el_venga said:
i could have test this radio but i sold my spare motherboard of TP2 . but i will give it a try asap.
Click to expand...
Click to collapse
I wish I knew, I would have bought it from you for further testing. If anyone wants to sell their TP2 to me for a discount so I can do more testing on different versions of the TP2 please let me know.

Hey ccengineer, did you ever get yourself another tp2? Just noticed something interesting.
I put in a tmobile sim card into a Sprint deactivated tp2 and I got a voicemail notification even though the phone wouldn't register on the tmobile network. You surmised on the ppcgeeks thread that perhaps the US antennas or frequencies were not being assigned. However given that I am getting a voicemail notification every time I turn on the phone, I think the phone is able to talk to the towers. Perhaps there is a network ID blacklist in the NV Ram for Sprint phones.

The link on the first post is not working, can you upload the NBH file again please?

i want to try bur the file is miss...

please someone upload the patched nbh )

Was anyone able to get this working?

Anyone get it to work? Does this basically make the TP2 into a world phone? Any help is appreciated.

Network Sim Unlock i5801

I bought my phone outright not on contract so i figure it should be unlocked but seems it isn't.. If i was to call Telus in Canada here would they give me the unlock code for free or would they charge me???
Edit: Well it actually worked and i just used "This Video" on instructions to do it.. It just left a few things out or at least made it harder to see on the video
1. In order to edit the Credits from 1 to 11, you need to enable a setting. Hit F11 in fiddler or click on "Rules" then "Automatic Breakpoints" and enable "Before Requests" otherwise when you run the samsung app it'll just tell you it doesn't have enough credits.
2. Another thing to remember when doing this is now whenever the "Client" Line pops up in Fiddler your going to need to manually tell the program to progress using these little Yellow and Green buttons.. if you don't the Samsung Unlock app won't do anything and it will seem like it froze.. It hasn't its just waiting for you to tell Fiddler to move to the next step..
3. And one more is to make sure before bothering to unlock to make sure your SIM doesn't have a password on it.. I noticed it causing the network unlock to reset whenever i rebooted.

ffcloud2000 i suggest to remove [Q] and question marks from title cos this works.
i did it today on my SG3 i5800 and i can confirm.
it took a while till i got it right and then i saw some instructions below video posted by some guy:
FIGURED IT OUT!!!!!
The only problem I had is with changing credits from 1 to 11.
This is done as follows:
1. enter user name and password and click [Connect]
2. Switch to Fiddler and select the line having word "client" at the end
3. Click Yellow button to see the text
(NOTE: most people miss clicking the yellow button first, which will open the text for editing)
4. Go to credits and type "11"
5. Click the Green button
6. repeat the steps whenever having line "client"
to clarify:
after you hit [connect] you go to fiddler and find line that has word "client" in it. mark that line and hit YELLOW button on the right side. then you change that credit to 11 and then you hit GREEN button. you ll notice that SRS holds when you hit yellow button and continues after green. also when you change those credits from 1 to 11 you ll notice that on SRS it is also changed to 11. wait a bit and you ll get codes.
i tried those 2 links above and those methods didn't work for me. couldn't find code.

I unlock today two Galaxy i5800, mine and my girlfriend's phone.
The first I take about 1,5h or 2h to understand what I have to do, the second phone take about only 2 minutes
It is really easy, but you need to know what have to do before.
PD: So to unlock insert another SIM with a different company (SIM without PIN code!), when ask for a code insert de NCK code that you read with the software.

I need help with this. Can't go through with it.

Memnarch said:
I need help with this. Can't go through with it.
Click to expand...
Click to collapse
What are you having a problem with?

I have Galaxy 3 i5800. Tried following steps in the video from the first post. I get "Invalid procedure call or argument" error in the end, in the SRS program.
I even cannot get enough times(as shown in the video) of that Client2010 line in Fiddler. That guy in video gets that line like 2 times more than me, but in my case it just stops showing, after I've clicked "Run to Completion" on the last client2010 line.
Edit: I will write down here the steps I take and what happens.
---------- Post added at 05:29 AM ---------- Previous post was at 05:02 AM ----------
I am not able to post links yet but here is a screenshot of my steps:
i.imgur.com/VVwUG.png
And then I get that "Invalid procedure call or argument" error in SRS.

Try running the Programs with Administrator.. I ran into errors also but i'm on Windows 8 so it might have been my issue

I did run everything as administrator.
I have read on SRS website that for SRS to work you have to run it on 32 bit computer. I just installed 32 bit windows and didn't work, everything is the same.

Memnarch said:
I did run everything as administrator.
I have read on SRS website that for SRS to work you have to run it on 32 bit computer. I just installed 32 bit windows and didn't work, everything is the same.
Click to expand...
Click to collapse
Try using Compatibility mode.. change it to a different version of windows and retest

Just tried. Didn't work.
Tell me, in which state exactly the phone must be when doing this. And which exactly sim card has to be inside? I didn't yet try without a sim card.

I just had mine plugged into my computer like normal like i do to charge it.. You have to remember to change some settings on your phone though and change them back after you finish
Code:
1. Go to Menu - Settings - Applications - Development -> USB Debugging
2. Type *#7284#, select USB > Modem
3. Type *#9090# and click on usb_diag

Did that. Except for *#9090# part because my phone doesn't show usb_diag but I read somewhere that if it doesn't, it doesn't matter
Damn... I'll just buy the code for unlocking xD.. I'll wait few more days, see if it works out somehow

Memnarch said:
Did that. Except for *#9090# part because my phone doesn't show usb_diag but I read somewhere that if it doesn't, it doesn't matter
Damn... I'll just buy the code for unlocking xD.. I'll wait few more days, see if it works out somehow
Click to expand...
Click to collapse
Yea i just set mine on USB.. can't remember if it was set something else or not
It should work i've done it on two phones now so far..

but today, with SRS new version this doesn't work, does it ?
Does anybody check it today or yesterday ?

I have no idea I just used the version from the video.. could try it though
Sent from my GT-I5800

Where is the client line ?
Where is the client line ??
Can you send me a screencapture plzzz !!
thank you

Flash the sph-L900 to boost. SGN2 to boost mobile

This will be the place holder on the procedure to flash the Samsung Galaxy Note 2 to Boost Mobile.
In regards to respect and response to Trim**

If you brick your phone, it is not my fault. I will not take any liability for your stupidity; and lack of patience. If you want to make a donation to my
fund, then I might be able to help you.
Please have patience and understand the concept on which I will explain to you.
Tools:
--------------------------------------------------------------------------------------------------------------
4 hours or less depending on your willingness to read the manual in its entireity (and the ability to overlook spelling and grammar errrrors)
WINDOWS XP PRO with dot net 4.1 and service pack 3
If you do not understand the terms of this paper you should stop immediately and seek professional help or spend another 2 hours learning the terms
The members I menitioned above are responsible for the research and if you lookup there posts you will find the files!!!
SAMSUNG DRIVERS FOR YOUR PHONE
Snagit / or you will need to manually copy the screen shots.
ODin3 v1.85
The factory ROM sph-l900_spr_L900VPALJ1_L900SPTALJ1_Original.zip (file name you need to download from reputable source)
GalaxyNote2RootSprint.zip
RootExplorer.apk
BusyBOX
2 boost mobile phones (in case you f**kup you can revert back without calling boostmobile)
My donors were a incognito and a samsung factor (incognito was donor, factor was there to fix error 16)
DFS 4.0.1.1
CDMA workshop 2.7
QPST 378
QXDM 03.09.19
------------------------------------------------------------------------------------------------------------------
Tip 1: Root your phone so you can find the MSL!
Flash the GalaxyNote2RootSprint.zip file as it is VERY important that later on you will need root privelleges to remove spy software.
Look it up as I could easily take up 2 pages of writing to answer how to root your phone, so to keep it simple... Read up using the files I
explained above within the tools section.
Tip 2: Reset the phone everytime you f**k up. Do not proceed if you mess up. START OVER!!!!
go to dialpad and type in ##786#
Tip 2: Create the template:
Gather your (SPC/MSLD, MEID, DEC, ESN, PRL, and CAVE if possible) put them into a notepad.
Tip 3: This is no way even close to how you flash an EVO! So don't go looking at that method as it will mess you up.
Tip 4: Never change your MEID until last!!! If you do it before, your phone will reboot and you will be locked out again!
Tip 5: 32bit passwords are BS and they seem to change each time you switch phones, so do not think they are the same as it takes 20 minutes before boost
unlocks your account for the next / new phone to even browse.
Now without further delay lets begin.
---------------------------------------------------Galaxy Note II L900 Flash from sprint to boost manual -------------------------------------
----------------------------------------------------------Donor Segment ---------------------------------------------
Install DFS, QPST, QXDM and workshop 2.7
Get your sanyo incognito (donor) <--- I hate all others, and copy NV items 465,466,1192,1194, then copy NAM1, and NAM2 using workshop 2.7. Make sure you put
the code of SPC in as it will not work in regards to copying the NV items and NAMs mentioned earlier.
Go to DFS and connect the Donor to the proper port and take screen shots of all sub tabs under the programming tab below. Remember to send the password and
passcode so that you can gather all info without delay.
Now type go into QPST and service and programming and connect your phone there as well and take screen shots of all infor there and label accordingly.
-Now if you did everything above you have all you need and you now may turn off the donor and pull battery out and store it. Never turn it back on again!!
---------------------------------------------------------End Donor Segment -----------------------------------
----------------------------------------------Begin Flash -------------------------------------
Now connect your Galaxy Note II L900 (L900) and type *#PATI#
Now unplug the USB from the computer and plug it back in. (see now it should recognize properly now)
Now do the same for QPST (If you have errors connecting to QPST you need to change PRL to 61009 then something random after that but go back to 61009 after this, you can change your PRL using DFS)
Next open up DFS and then transfer all information you screen copied from the donor to your note.
Now reset using DFS
Next go into QXDM and issue these commands:
password 01F2030F5F678FF9
RequestNVItemRead meid
RequestNVItemWrite meid 0x00A00000000000 < MEID/HEX ID from donor phone
RequestNVItemRead meid
RequestNVItemRead esn
RequestNVItemRead scm
Write SCM 0x2a
Now close QXDM
Open Worshop 2.7 and apply all NV items and NAMs!
Now you are all set.
If you get error 67 please go back to DFS and rewrite the values.
Once you get it perfect you can simply stop the nagging activation codes using:
root explorer "paid version" to rename the file "/system/app/SprintSyncMLSvc.apk" to "SprintSyncMLSvc.apk.bak"
If you also want to stop the nagging system update message, just stop google framerwork services. "remember to restart when you go to google play" <-- google play depends on it.

Im reading this and had to ask a question. My gn2 was flashed only with one software dfs. I already knew my spc codes for donor and gn2 so all he had to do was read and copy. Your saying I basicly have to have many softwares to do a simple flash. The guy who did my phone is going to charge me 150 to learn how to flash to boost with that one program
Sent from my SPH-L900 using Tapatalk 2

shadricksimms said:
Im reading this and had to ask a question. My gn2 was flashed only with one software dfs. I already knew my spc codes for donor and gn2 so all he had to do was read and copy. Your saying I basicly have to have many softwares to do a simple flash. The guy who did my phone is going to charge me 150 to learn how to flash to boost with that one program
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I learned on CDMA workshop and QPST/QXDM. I do not want to get off topic; but one day you will not be able to flash; because of some simple file/security blocking you. Like those of us that use QPST/Programming learned that DFS was a better choice to use AAA vs relying on the QPST modules.
How long until the reverse happens. I recommend having both skills and if you want to learn, I can teach you for $40.00 I think $150 is a bit steep but his time is worth what he says it is, as its his life... :0)

Hey, Im having an issue with a New Samsung Galaxy Note 2 phone. Im experianced with flashing various phones.
he flash went fine for talk and text, but i have no data due to hands free activation stoping my 3g service. During the handsfree activation 3G pops up showung me my AAA keys are correct, then disappears.
I even tried disabling the sprint ML and activation apks to no avail.
Is the only way to fix this is to activate it on sprint first?
Or does anyone know of a phone code to disable the handsfree activation?

I can guarantee you you do not have evdo set
And your AAA is not correct.
The not has 2 distinctly different AAA
and only the HA is the same
Sent from my SPH-L900 using xda app-developers app

Both my Unique AAA Passwords are input correctly, and the values are correct. They work fine in both my evo 3d and Epic. But the Note without activating it once, will not let my 3g connection exist.
I also activated 3 other note 2's that were used with no problem with working LTE (3g passthru). Mines is the only new one.
hawaiideveloper said:
I can guarantee you you do not have evdo set
And your AAA is not correct.
The not has 2 distinctly different AAA
and only the HA is the same
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse

This is not an evo or epic
You should have 3 passwords. I have now done 8 galaxy note 2 phones.
I like you in the past thought the same. If you look at your data settings you will see cdma
Select it and it will begin saying your password is wrong
Reason for is because it is.
Connect to your DONOR not the evo or epic phone using DFS
Then take note of profile 0 and profile 1
As well as the AAA
If you would like I can do a teamviewer session with you and get your data working.
Just PM me 1st
Sent from my SPH-L900 using xda app-developers app

Despite your 3g icon being on. Do not trust that it is the phone bluffing
Sent from my SPH-L900 using xda app-developers app

Those values are taken from my Touch Pro 2 using cdma ws. the AAA Profile 1 info from the data edit screen and my Profile 0 info from NV 1192
I just PM'ed you.
Thanks for the help.
hawaiideveloper said:
Despite your 3g icon being on. Do not trust that it is the phone bluffing
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse

I go into EVDO engineering and see my AAA key is passing and I've set the phone to CDMA only data mode (which used to work before for EVDO) and yet the phone only wants to stay in 1x and fail evdo authentication. I think it has something to do with the profile 1 variables or something. When I reset the phone, it disables profile 0 and pastes [email protected] into profile 1 and I can get that to connect over EVDO no problem with the 3G icon coming up, but that's just some sprint internal network with no internet access, so all I can do is hit an access denied website on the HA gateway and that's it. I have no idea why the boost mobile profile that used to work will now never connect. I've done multiple ODIN flashes and erased and restored NV and nothing...EDIT: And I've read and written NVITEMS but I'm pretty sure the necessary NVITEMS don't stick, even if you send both spc and password to phone before writing nvitems. Seriously getting out of ideas, especially since it used to work on this phone and now it doesn't.

Starting from scratch!
gotonull said:
I go into EVDO engineering and see my AAA key is passing and I've set the phone to CDMA only data mode (which used to work before for EVDO) and yet the phone only wants to stay in 1x and fail evdo authentication. I think it has something to do with the profile 1 variables or something. When I reset the phone, it disables profile 0 and pastes [email protected] into profile 1 and I can get that to connect over EVDO no problem with the 3G icon coming up, but that's just some sprint internal network with no internet access, so all I can do is hit an access denied website on the HA gateway and that's it. I have no idea why the boost mobile profile that used to work will now never connect. I've done multiple ODIN flashes and erased and restored NV and nothing...EDIT: And I've read and written NVITEMS but I'm pretty sure the necessary NVITEMS don't stick, even if you send both spc and password to phone before writing nvitems. Seriously getting out of ideas, especially since it used to work on this phone and now it doesn't.
Click to expand...
Click to collapse
Gotonull,
Simply start over and follow my instruction to the "T" and when you get stuck, you can PM me. I do recommend that you make a teamviewer session 1st then that way I can truly walk you through it.

Temporarily closing this until I get it sorted.

Any ideas on how to get the MSL number for a non android (brew) phone?

I have a Kyocera Dura xt that I need to do an OTA update on in order to get my data services working correctly. My phone is a sprint phone, but my carrier is Qlink. As soon as I type in the code to perform the update I get promoted for my msl code. Qlink says they don't have it since its a sprint phone and I need to call sprint. Sprint tells me since I'm not a customer and the phone was never activated with them, they won't give it to me. I've called sprint five times only to be told the same thing every time. Since its not an android phone I can't use any apps like msl readers or logcat. I also can't do any adb commands to get it. I've also tried coma workshop. Version 2.7 gives me a range check error when I try to read my phone and version 3.9 only supports reading the msl if you pay to register. I also tried qpst but for some reason it can't read my phone's file system. At this point I'm about ready to give up and try to start brute forcing, but trying a million combinations by hand doesn't seem practical. Any ideas?

Jesseb342 said:
I have a Kyocera Dura xt that I need to do an OTA update on in order to get my data services working correctly. My phone is a sprint phone, but my carrier is Qlink. As soon as I type in the code to perform the update I get promoted for my msl code. Qlink says they don't have it since its a sprint phone and I need to call sprint. Sprint tells me since I'm not a customer and the phone was never activated with them, they won't give it to me. I've called sprint five times only to be told the same thing every time. Since its not an android phone I can't use any apps like msl readers or logcat. I also can't do any adb commands to get it. I've also tried coma workshop. Version 2.7 gives me a range check error when I try to read my phone and version 3.9 only supports reading the msl if you pay to register. I also tried qpst but for some reason it can't read my phone's file system. At this point I'm about ready to give up and try to start brute forcing, but trying a million combinations by hand doesn't seem practical. Any ideas?
Click to expand...
Click to collapse
If you have a method that works but requires paying, then just pay for it and get it over with instead of chasing your tail. You may inadvertantly cut your own throat in the process trying other ways.
Sent from my SCH-I535 using Tapatalk