hi all
am using turbosim on gsm , but while talking on phone the sound is scrubbed which makes the conversation unbearable. i dont know if it is b\c of the turbosim' or maybe i need to configure something on the phone.sometimes after a while the sound is getting better. the other side hears me well all the time. does any1 familiar with this issue?
btw- what does the VPN, MCC, MNC responsible for?
Related
Hello,
I've searched through the forum and haven't found an answer to my problem.
I need to know when a call is forwarded to me - me and a friend from my office have call forwarding when for eg. my all lines are engaged or I'm out of the network area then someone calling me will be connected with him and vice versa. But hte problem is that we don't know when someone is calling me or him. In f.e. Nokia phones there is a distinction between this, it looks like this:
Someone is calling me directly, it looks like this:
+4822123456
The call is diverted, it looks like this:
> +4822123456
Is there any way to know when a call is diverted in HTC phones with WM5 or WM6?? If it helps - my pda is HTC TyTN.
can anyone help?? Maybe someone can at least tell if he ever saw anything like this on HTC palmtops?
A slight kick, but does anyone already know a solution for this? If someone could develop it, I'll be more then happy to pay for the feature!
I am using an application made by schap for doing some voip..
I am using a voipbuster account. I set the internet calling ok and it connects when i set it to connect but when i do a call appearsa globe telling me that it is not possible to do a call what did i wrong?
this are my settings
gimme sum light guys!
THANKS!
try to call with prefix "00" intead of "+".... it's caused by a ipdialplan.xml.
btw. I have problem after I made a call... there is one way sound, I don't hear anything, other side is all right... any solution?
zoky said:
try to call with prefix "00" intead of "+".... it's caused by a ipdialplan.xml.
btw. I have problem after I made a call... there is one way sound, I don't hear anything, other side is all right... any solution?
Click to expand...
Click to collapse
yeah...i don0t get sound on my prophet... but i got heard very well in the other side...
Ok, I have tried using prefix 00 and I get
"Cannot complete the call. The signal may be unavailable orthe phone number may not be valid. Verify the number or try again."
WI-Fi Signal is OK (Can surf on IE perfectly) and the prefix is ok also (tried with + and 00 btw).
Any ideas?
cesardeluxe and zoky:
that's a common problem with SIP. You probably behind a router with firewall. In common situation problem will be solved with NAT setup on router and port range setup on sip client. I have NAT configured but since wm6 sip client do not allow us to define the same port ranging as [email protected] (as far as I know), we will have allways this problem.
I'm also searching on this. At this moment I can only make calls (with correct 2 way sound) inside my network (we have our own asterisk box inside network). By the way, the quality is not the best, so I think I'll not loose too much more time with this but before quit I'll try to install some other sip client to work with (if I found some) one of these days.
Regards.
same
same problem here. i can receive calls perfectly wich should be the most dificul part, but when trying to call i get that message too..
help please
Hmmm...is this possible with XDAIIi? I have XDAII but my friend has XDAIIi and he might sell it to me cheap if I can reflash and upgrade the rom and make it working again.
I am using Onesuite.com voip and was very happy with their service. I was able to use an ATA device with it but took me awhile before I figured it out. If I can use it over a PDA/cellphone then it will be perfect.
Now is it possible for XDAIIi to make voip calls? What software or programs do I need to install to be able to use my Onesuite voip? Hopefully someone can give me some instructions.
Thanks.
Let me just bump this one.
Anyone can help me find answers on how to use voip on XDAII. I am using Onesuite voip service, it works on SJphones, X-lite's and even ATA device and IP phones. I just don't know for XDA's.
zxt said:
Let me just bump this one.
Anyone can help me find answers on how to use voip on XDAII. I am using Onesuite voip service, it works on SJphones, X-lite's and even ATA device and IP phones. I just don't know for XDA's.
Click to expand...
Click to collapse
Search for Express Talk. I am using it on my Onesuite account and it works. Just search for it on Google.
Anyone using Fring here? I'm having problems setting it up with Onesuite but based on their website (fring.com) its compatible with any SIP based voip like Onesuite.
Hello I'm quite a novice at cell phone stuff to please forgive me if I'm asking in the wrong place or wrong question.
I bought a Samsung Admire R720 about 6 months ago. It's umm locked for the carrier MetroPCS. I never activated the phone with them because I didn't have the money yet. I just always used the wifi wherever there was a hotspot. I also rooted it because I wanted to use more advanced tools like the wifi analysis and Titanium backup etc. I also used Groove IP on the phone to use my google voice while I was on wifi. Now the fun begins.
I activated the device with Metro online and did all the MEID stuff and the phone seems happy but I cannot dial a call to anyone (unless I use groove ip). When a number is dialed, it rings once and a recording pops up saying:
PS01 Your call cannot be completed. Bye. *click*
Everything else works on the phone though. I can accept incoming calls to the cell phones number. I can text and I can surf the web. All with the wifi radio turned off so I know its going through the carrier.
I'm lost as to why it wont simply make a call out. I have the android toolkit here and can use adb to do anything you ask of me, dumplog push pull... whatever. I've seen the dumplog while trying to make a call and I have a copy of it but I would rather one of you more experienced folks tell me what to search for then post it here. Otherwise the dump is huge and messy because its raw with no modifiers.
Any help would be much appreciated. I do have a ticket in with MetroPCS but I think the real techs there aren't very available or none exist.
Thanks in advance!
Dave
Initial Title: Disabling Voice Privacy Option on LG G3 D850, how?
Hello mates .
Call Quality and Volume are not being good so far, and i saw people saying to turn off "Voice enhancement, Noise Suppression, and Voice Privacy", well the thing is... Where's Voice Privacy option in this model? :S, is there any way to make it visible by changing anything on build.prop or other file? "just like when on build.prop we change the line ro.build.target_operator from "ATT" to "OPEN" and more options become visible on the network options just like being able to choose between 2g/3g/4g, that by default is a hidden option in this model".
Don't think it's faulty device because hearing music on the in-call speaker is working without problems, and recording voice is also good.
Please help me, it's frustrating having a phone BAD in Phonecalls .
Best Regards
----------------------------------------------------------------------------------------------------------------------------------------------
Update
Title: Bad Call Quality/Volume on LG G3 D850, any fix?
Messing around a little bit more i found out how to add Voice Privacy Option on D850, but i don't recommend because it's useless, that option is only on CDMA mode and as D850 doesn't have CDMA you can be sure that just like happened to me your SIM won't be recognized anymore on your phone and you'll have to factory reset/full wipe all, so Forget it really!
About the bad quality/volume on calls, since front speaker hears good on listening to music and recording voice, maybe a software or hardware problem "in Kit Kat i noticed it was worse than Lollipop" but even on Lollipop quality and Volume are still bad, so i wanna ask you: any fix for this bad call quality?, and: what is the name of the object on smartphones, that works like an antenna for the calls?, because maybe it can be a faulty piece being fixable by replacing with a new one.
Best Regards
Crazy Seed said:
Hello mates .
Call Quality and Volume are not being good so far, and i saw people saying to turn off "Voice enhancement, Noise Suppression, and Voice Privacy", well the thing is... Where's Voice Privacy option in this model? :S, is there any way to make it visible by changing anything on build.prop or other file? "just like when on build.prop we change the line ro.build.target_operator from "ATT" to "OPEN" and more options become visible on the network options just like being able to choose between 2g/3g/4g, that by default is a hidden option in this model".
Don't think it's faulty device because hearing music on the in-call speaker is working without problems, and recording voice is also good.
Please help me, it's frustrating having a phone BAD in Phonecalls .
Best Regards
Click to expand...
Click to collapse
It was be under calling or phone under settings. And depends on what you mean by bad call quality. That normally is an issue with the mic or network issue
Sent from my iPhone using Tapatalk
hyelton said:
It was be under calling or phone under settings. And depends on what you mean by bad call quality. That normally is an issue with the mic or network issue
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks for answering.
Yes but the thing is that the Option Voice Privacy seems to be a not 'visible' setting on this model "just like the changing 2g/3g/4g Network, but was visible after changes in build.prop" :S.
Bad quality - It should be more clear, loud, and it seems like it's trying to suppress noise even without that option activated".
Network has maximum signal, and mic records well on Voice Recording so it should do fine also on calls i think :S.
PS: also heard about Hd Voice and presets on phonecalls, where's those options at in this model?.
Device:
Pixel 4a (no 5G)
Android 11
My issue is:
If I talk to someone (call) it transfer just the "voice" the noise between is cutted out, so its like muted between spoken words.
Its not an good thing!
The issue is that it is just awful to call someone actually its not possible to talk, the beginning of each sentence is "broken" and its like half word then mute, so i have to ask again... and so on.
I tested diffrent things:
Call over LTE
Call over WiFi
Call with Heatset (wired)
Call with Bluetooth Headset
Call without headset
Its always the same nonsense, so I assume its some Android problem, setting maybe.
Can someone help please?
Thanks