Ever since I been having my Inspire I never seen 3G show up on my status bar. I always see H+ available, H+ connected and E. Never seen 3G yet, what's up with that.
The H is 3G and the H+ is "4G" they just changed the letter. E is still edge.
Thank you Sir!
Related
...and nobody at AT&T can tell me why. In fact, when I showed them the phone with the H and 3 bars at the Device Service Center, they claimed they'd never seen such a thing.
The backstory is this: I've had good service at my home for a dozen years. I've always gotten solid E reception. About a month ago, 3G reception started to creep into the picture, although at a very low signal strength. It bounced between E and 3G every few moments and I started getting lots of dropped calls, no dialing, missed calls, etc. where that never happened before. I did some research here at xda and decided to drop Airplane Mode from my settings and add a 3G on-off switch using Advanced Config. After some futzing around, that worked pretty good but now whenever I try to switch to 3G, I get HSDPA. Go figure? Not that I'm complaining, because it's pretty darn fast.
But what the heck...only one Device Service Center in a city this size (San Antonio) and they've never seen a phone showing HSDPA? None of this really means anything, I'm just looking for explanations/comments.
pretty simple man...
3G = HSDPA
kevindena said:
pretty simple man...
3G = HSDPA
Click to expand...
Click to collapse
Then why do my bars read H, not 3G? Actually, based on some online research, HSDPA appears to be a superset of 3G...a.k.a. 3.5G. At any rate, the "tech wizards" at the DSC had never heard of it.
I've got a Touch Pro running on T-Mobile network. Their 3G seems to be a different
frequency than the TP can receive. If I turned on HSDPA and then wander into an AT&T 3G zone and my TP picks up their 3G network, will it overpower my T-Mobile Edge and put me into roaming?
The H is the same as 3G like the other guy had said. Plus if you went into Advance Config. to change the setting then that will replace the 3g with the H. Which is not a big deal. All the phones in Europe use the H symbol in the US we get that damn 3G. Personally I like the H ova the 3G. H=High speed
So really and truly you have nothing to worry about. Should be happy you have the H showing up than the 3G to me H is a lil faster on some phones!!!!!!
att hides their hspa icon under the 3g icon. so you never know the difference between hspa 3.5g or umts 3g. if you flashed a new rom, updated your phone canvas, changed some icons, enabled it, or who knows, chances are you are back to the standard way the rest of the world has it, with the h icon.
Ever since I been having my Inspire I never seen 3G show up on my status bar. I always see H+ available, H+ connected and E. Never seen 3G yet, what's up with that.
swatcop1 said:
Ever since I been having my Inspire I never seen 3G show up on my status bar. I always see H+ available, H+ connected and E. Never seen 3G yet, what's up with that.
Click to expand...
Click to collapse
H+ is AT&T's work toward 4G and its faster than your 3G, they have provided this service to all their customers. This is something that happened a few weeks ago...
swatcop1 said:
Ever since I been having my Inspire I never seen 3G show up on my status bar. I always see H+ available, H+ connected and E. Never seen 3G yet, what's up with that.
Click to expand...
Click to collapse
ATTs stock ROM uses an H+ icon to indicate connectivity to 3G (UMTS), 3.5G (HSDPA), and "4G" (HSPA+). They do this to make customers think that they're ocnnected to "4G" HSPA+ all the time, even when it's not available in your area. Stock ROM also has an E icon for EDGE. Most of the ported DHD ROMs have an E icon for EDGE, a 3G icon for UMTS, and an H icon for HSDPA and HSPA+. The only way you can tell for sure what network you're connected to is by going to Settings - About Phone - Network and looking at your Mobile network type. This will tell you which network you are actually connected to
H is the 3G icon. that is just the way att is displaying it. you wont see 3G as they are calling it H. H stands for HSDPA which is 3g, so no worries you are fine.
On the notification bar you know how it says what service you are on edge or 3G well I'm having an issue on CM7 when I'm on 3G it says H at the top and sometimes it glitches up and says 3G at the top for a slight second. Anyone else have this issue? Is it normal thanks. It also occurs sometimes on the MIUI rom also
Sent from my Nexus S using XDA Premium App
H for HSPA. It is suppose to be faster than 3G, however just because it says H doesn't mean it is on HSPA. For example, att/moto has programmed the Atrix to only display H even when its on 3G. So I get an E for Edge or an H for HSPA or 3G, but no 3G icon ever. Different ROMs might display different symbols on different networks as well.
well everyone i rooted my Inspire 4G and recently i have been getting 3G when i should have HSPA+ right now but its switching between the H+ symbol and the 3G symbol back when it was unrooted all i had was Edge (2G) and HSPA+ so idk but i need conformation that my phone is still in prime condition please help! and thanks if you do
From the dialer, type *#*#4636#*#* and see what it shows for network type. Mine shows HSPDA which is faux g. If it shows UMTS, then you are on 3G.
The symbols are different as to which ROM you have installed. They seem to mean very little as your real connection.
Thanks guys!
hello all ..
I have a question.
I have the i727 phone with Cyanogen and Rooted. 4g icon does not appear in the notification bar, the connection works flawlessly, appearing H, H +, 3G but not 4G icon. What does that mean? before when I was working the STOCK ROM 100% sure the 4G, also tell them that in my country there's Connect 4G. but I'm not sure what type of connection that handles the phone. I downloaded this: << radio att-I727-UCMC1-no-csc-no-ril-cwm >> and I've installed, but still the same. I've also changed the APN, choosing the type of APN I select LTE but in doing so cut the signal. (apparently the phone is not supported)
Details:
Before: ATT & T STOCK JB 4.1.2 Rooted
Now: cm-10.1-20130607-NIGHTLY-SuperSU skyrocket + Root file-0.93-Busybox-1.20.2
Is there a solution?
Excuse my writing, I did it with the help of google translator but stepping reviewing the words to match the text well.
from Paraguay
Thank you!
Fer83 said:
4g icon does not appear in the notification bar, the connection works flawlessly, appearing H, H +, 3G but not 4G icon. What does that mean? before when I was working the STOCK ROM 100% sure the 4G, also tell them that in my country there's Connect 4G.
Click to expand...
Click to collapse
The stock AT&T ROM shows 4G for HSPA/+ but 4GLTE when there's LTE available. Cyanogenmod reports the actual data connection. It shows H/H+ for HSPA/+ and 4G for LTE. That's probably the confusion.
mrfeuss said:
The stock AT&T ROM shows 4G for HSPA/+ but 4GLTE when there's LTE available. Cyanogenmod reports the actual data connection. It shows H/H+ for HSPA/+ and 4G for LTE. That's probably the confusion.
Click to expand...
Click to collapse
far as I understand, ATT&T has a fault, shows 4G icon when in fact that is not a Connection Connect 4G. I mean, I understand that: 4G is not the same for H+ because H+ is actually 3.5G. it? is this correct?
Fer83 said:
far as I understand, ATT&T has a fault, shows 4G icon when in fact that is not a Connection Connect 4G. I mean, I understand that: 4G is not the same for H+ because H+ is actually 3.5G. it? is this correct?
Click to expand...
Click to collapse
Correct; AT&T shows 4G even when it is only actually 3.5G. You were probably only getting H+ all along, but AT&T's software misrepresents your connection.
mrfeuss said:
Correct; AT&T shows 4G even when it is only actually 3.5G. You were probably only getting H+ all along, but AT&T's software misrepresents your connection.
Click to expand...
Click to collapse
finally! I get it now! ... thank you very much! it is unfortunate that these errors come from the factory that exist only to confuse people.
10 minutes ago, I called my local operator, and said that the 4G or LTE service is not enabled yet in my country. (Just right through usb modem for LTE notebook works here, but not for mobile phones) so which I now understand that 4G phone on the screen showed when it was actually connected to a 3.5 or H + that would be the same thing ...