I just picked up a G tablet, made sure it was up to date then flashed 5.0.0. Everything working great, flashed 5.0.1 and now once the tablet goes to sleep I can't unlock it. The screen shows but nothing I touch does anything. I can see the unlock in the bottom right hand corner but will not move.
Any suggestions? and thank you.
Related
this morning, i found it odd how slow the touch screen reaction was but didn't think much of it until it just completely stopped responding.
i pressed lock/red button a little too long trying to figure out how to do a hard reset (had a full system back up from 2 nights ago to restore from) and now i can't get the unit to unlock itself! i'm also having a hard time hard resetting the phone as well. i followed a few directions found but none of them worked so... what is really the right way of doing this? i tried connecting to my laptop and do a complete ROM upgrade (not really, just installing it) but i can't get it to connect either!
HELP! what to do!
ok, so i got it unlocked by constantly tapping the unlock and somehow, someway, it decided to give me the unlock on the right center part of the screen. then i pounded away at it over and over again until it is now back to... well, the unlock mode. only problem: it's SUPER slow to the point where it feels unresponsive at all. i can tap away at it for 10 minutes and it would only recognize i wanted to click, start.
ok, so now what happened? thanks for any input.
Hi.
EDIT: found the solution here
I have a confusing problem with my motorola Atrix.
actually i guess i have the same problem as described here..
Its on the European DACH Retail 2.3.4 Stock ROM.
I can root and unlock it, but there seems to be something really corruptet.
sorry for the strange expressions.. i cant explain it properly in english :/
when I start the Phone the touchfield seems to be callibrated incorectly.
i have to touch the screen "closer to the bottom" to activate whatever i wanna touch on the screen. (for example to unlock the phone i have swipe to place my finger like 1cm _under_ the unlockbar)
this makes it impossible to use the touch keys on the bottom of the screen.
other strange things happen when i unlock the phone and enter cwmRecovery.
buttons are like... switched. sometimes something gets activated without touching anything at all.
I got frustrated and reflashed with RSD Lite 5.6 but the the problems stay!
I have no idea what to do. Is there a way to REALLY reset everything?
As it seems flashing the 2.3.4 DACH stock rom doesn't reset everything.. otherwise problems couldn't stay.
Is there a way to reformat the internat chipsets to its original state?
just to mention: there's no way i damaged the phone by letting it fall on the floor or any other physical manipulation. everything i did was software flashing with the original motorola software updater, cwn, and rsd lite 5.6.
Here's the problem: when the TF boots into the OS, the screen cuts off after the boot animation. I can see it fine in CWM also.
I was running the Prime ROM with HC 3.2. This ROM has worked quite well for months. Earlier this week, I was going to boot it up and use it while riding in the car. The screen was fine during the boot animation, but as soon as it hit the OS, it went blank.
I hit the power button and could tell that was working, because I could see a quick flash of backlight when I pressed it. But no screen display.
So I saw that Revolution 3.0 was released, so I installed it. The screen worked fine through CWM and everything was fine up until I installed the OS and went through the initial bootup and setup process in ICS.
When I turned it off and back on, it wouldn't come on. So I don't really know where to start. I assume this has something to do with the backlight sensor, and I have looked around here for some references, but nothing comes up.
Is there a way to disable the backlight sensor completely to test my idea? Anyone have any other suggestions? Thanks all.
My TF was serviced by ASUS back in the summer after I dropped and bent the bezel. They put a new power button daughterboard and bezel on it.
I just wiped the tablet with CWM and it let me reboot and go through the ICS setup steps again.
Screen went dark the very instant I touched the brightness slider control...
Whenever I lock my device, the touchscreen becomes unresponsive. I must restart the device after I lock it every time. the lockscreen only works the first time u use it. Even if I hold down the power button, none of these work and I must do a hard shutdown. Has anyone else had this problem. I am on stock, with one firmware update, unrooted. I have the US WiFi model.
Update: I have tried a no lock app which skips the touchscreen. This works, but when the screen is unlocked no touch input is accepted.
Search for Entropy's Odin flash , and reflash.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Did You try to switch of lock screen completely in settings ?
?.............................
frozen lockscreen
That update has screwed up pen on many devices . Mine was like that too for a while . I have changed settings in stylus , disabling the pen detection , and after that when I remove pen touch does not work , when I put it back screen works again . I went back to the store and exchanged it for new device . Since I heard that samsung has pulled back that bad update , I tried to update and it is pulled back . But samsung is not doing the right thing . They should put old one as " update " so that people can fix their devices . Find and flash rooted UEALGB rom and you will be fine
I saw this behavior when battery was low. After charging it up the issue went away. This was after the update so that might've introduced the behavior. Another GN 10.1 without update doesn't do that.
troed said:
Did You try to switch of lock screen completely in settings ?
Click to expand...
Click to collapse
This does not work. When I turn the screen back on no input is registered. I am going to fully charge it now.
Ok, i seemed to have found the problem. I was on vacation for the last 3 days, and I had forgotten my S-Pen at home. On the last night I began encountering these problems. I have just gotten home and was able to test the tab with the S-Pen and it was not accepting the S-Pen input at all. I restarted the tablet, with the S-Pen in its holder this. Now everything works perfect! This was very strange but I am glad that it is working now. Thank you all for your help.
Hi people
I need some serious help!!
I bought Moto G from US which was working fine until now. I played rip tide and the phone got struck when i pressed home button in the middle of the game. So i restarted the phone.
Now, after restarting the phone boots up normally and comes to home screen (Smart Launcher). But, if i press anywhere in the screen, phone hangs and there is no response.
Actually, after booting i am able to go to settings from lock screen and work on settings. However, when i go to homescreen phone freezes.
The same thing happened last month and I did a factory reset and everything worked fine.
This time i dont want to do that as I lost all my contacts. photos,videos after factory resetting.
Please help me on this.
You may reply to my mail iD: [email protected]
Note: I am NOT rooted and using Kitkat latest version
Srini2308 said:
Hi people
I need some serious help!!
I bought Moto G from US which was working fine until now. I played rip tide and the phone got struck when i pressed home button in the middle of the game. So i restarted the phone.
Now, after restarting the phone boots up normally and comes to home screen (Smart Launcher). But, if i press anywhere in the screen, phone hangs and there is no response.
Actually, after booting i am able to go to settings from lock screen and work on settings. However, when i go to homescreen phone freezes.
The same thing happened last month and I did a factory reset and everything worked fine.
This time i dont want to do that as I lost all my contacts. photos,videos after factory resetting.
Please help me on this.
You may reply to my mail iD: [email protected]
Note: I am NOT rooted and using Kitkat latest version
Click to expand...
Click to collapse
Please help me on this!!!
If you can access the settings menu, go in and delete Smart Launcher, then reboot.
See if thats the issue.