I will give some background to begin with. I had installed the Kies mini update to the 2.2 software on my Captivate. I then rooted with super one click. I have the drivers for the Captivate installed in Windows XP and I have USB debugging enabled. It recognizes the drive and will show me the contents on the computer, but it doesn't allow me to copy from the computer to the drive. I know I can use dropbox for some things, but for other things like installing a custom rom, I would like to be able to copy to the drive. It does show as mounted and mass storage is enabled on the phone. Any ideas?
If you are rooted just go into cwr and mount sd card there. if not i have no idea as i haven't kept a phone stock since a week after i got my old Moto Droid, as soon as i found out it was possible.
Well apparently the version of Clockwork Mod Recovery that I have doesn't give the option to mount the SD card. I have 2.5.1.2. I did find a way using SGS tools to download a custom rom to the root of the SD card. I was going to reinstall Debian Linux at some point on my computer so I may have better luck with using that to write to the SD card then I am having with XP.
Yeah
Make sure that the SD card isn't locked. Also, back up everything on it to your computer and do a complete format as well. And if you're wanting to write ROMs to your SD (or CWM, etc.) in Linux, you're going to have to use dd in the terminal, and most like will be writing to "sdb".
Here's a simple walkthrough just in case you don't know how to use dd:
Become root by typing "su" and following it with your password. If you don't have a root password, type in "sudo passwd" and set it.
Next you have to unmount your microSD. To see what you have mounted type in "mount". Your SD card will most likely be called "/dev/sdb" or "/media/sdb" or something along those lines (not sdb1, that is the partition on the card). Once you know what your SD is called and where it's located, type in "umount /dev/sdb", placing '/dev/sdb' with the actual location and name of your SD card.
Now we get to use dd. Type in: dd if=<insert location of IMG here without the tags I included> of=<location of your sd without the tags I included> bs=1M
Be patient, because it usually takes a while, depending on what you're writing. Good luck mate.
I was looking for an answer to this myself. Me and my girlfriend both have the same phone, galaxy S. We both put andromeda rom on it and are now going to switch to FireFly (I did, she's trying to).
Well, mounting her USB storage ends up with the internal SD card being recognized as a CD ROM and the external as a usb storage device.
Anything we try to do to her internal says there's write protection and to disable it or use something else every time we do anything.
Only even trying this because we're getting some weird "Error at line 17: symlink with SU..." blah blah....
Completely stuck here. Doesn't make any fracking sense.
same to me. what should i do? I'm trying to install Andromeda. But I can't even copy ROM file to internal SD card. HELP ME ASAP!
I am rooting my daughters Droid Eris. I used the app from the market and flashed Cyanogen 7. Everything went well until I tried to start restoring her apps and found that the phone is saying there is no sd card. When I go into setting to mount it it is greyed out and wont do anything. the gallery and rom manager also say there is no sd card. the card I am using is not partitioned. I tried taking a partitioned sd out of my old Cliq and putting it in and then it says it has a unsupported system or something like that but I did notice that the mount sd in settings was no longer greyed out. If I reboot into recovery it will recognize the card because it lists what is on it. I have searched everything I can find and cant find any answers. Oh, also, when I plug in the usb to the computer it does nothing then either. Any Ideas??
When I put the partitioned card in from the cliq it says blank card or unsupported file system. I tried to hit mount card in setting but it just says blank card and It is not a blank card.
::::::::ROBLEM::::::::::::
ok, just posting this in case anyone has a similar problem and does a search so that this will come up for them.
My phone died in the middle of booting up while it was doing a media scan.
Upon plugging the phone in and letting it charge for a while, I turned it on and the sd card wasn't recognized. I rebooted to recovery and it would also not mount there.
I tried formatting from recovery with extreme FAILURE LOL.
SD card reads fine from PC through a usb adapter.
Formatted SD card from pc and tried it in the phone again and still would not recognize it through several different recoveries or in android.
FIX::::::::::
So what I ended up having to do was connect the phone to the computer through the supplied USB cable.
Odin the charge.pit file make sure repartition is checked
Odin a full rom combo of any type, I used ep1q bloated.
Then booted into recovery and everything was successful in mounting the microsd card. Installed the rom of my choosing and it recognized it fine in android again as well.
Just figured some other person may have this problem again. I figured my microSD went tits up, but it was fine when used in the PC. Thanks for listening.
What my solution to this was
Shortly after putting my 16gb micro SD card from my Evo3d to EvoLTE, it wouldnt mount. stick it in, "mounting SD" and immediately "Removing SD" etc. Same thing with another android phone while their SD mounted fine.
Plug into windows and there is no SD to mount so i tried a microSD to SD converter card in windows and after very long delays i would see my file structure but nothing copied over.
Heirens Boot CD (i had 15.1) booted into the linux recovery/backup mode and was able to copy from SD to the HDD. Not sure if i'll try to wipe and re-use or just replace the 16GB card nor if it will mount at that point. Its still copying various folders but i got all my DCIM (4gb worth) back so i'm a happy camper either way.
Just thought i'd share how i got my data back at least
Hey guys,
I need a lil help! Searched all over but couldnt find a solution. So I was trying to go back to stock. I formatted my SDcard via gparted to FAT32 and rebooted my phone into bootloader. Flashed an SBF with sbf_flash. Now when my phone starts up the SD card is stuck at Preparing SD card searching for errors. If I allow my screen to time out, it gets stuck and pressing the unlock button only gives me flashing lights for the buttons below. I remember some other people having this problem but for me I think it has specifically to do with the SD card because when I remove it and boot everything seems to be fine.
So I tried connecting the phone via USB to my computer. I set the screen to never time out to avoid the black screen and flashing lights thingy. Gparted does not recognize the SDcard, when I select mass storage. Strangely the disk utility in ubuntu recognizes that something is mounted /dev/sdb/ but cannot format or anything and it doesnt show the size of the directory.
In the phone options the card is not mounted so I cannot format via the phone. I dont own a carder reader and where I live itll be really hard to find one. I tried on a windows computer but that didnt recognize the phone at all.
One thing though, I rooted the phone and I can get into adb shell. In adb it shows me an /sdcard/ directory. I was wondering is there any way I can format my SD card using adb?
Thanks for all the help! Cheers!
Never mind, I fixed it. Seems like rooting and logging into adb shell did something to mount it in the phone. Thanks!
sohrab.naushad said:
I dont own a carder reader and where I live itll be really hard to find one.
Click to expand...
Click to collapse
you could buy a card reader online...
http://www.ebay.com/sch/i.html?_fro...13&_nkw=card+reader&_sacat=See-All-Categories
Hello guys. I am a first time rooter. I followed this root guide, http://forum.xda-developers.com/showthread.php?t=1016084 all worked and I have tried 3 different roms. The only thing that faile dto work was Gparted, it does not recognise my SD card. I only see my PC HD.
I have tried restarting it, using a different SD card but still the same issue. The whole point of me rooting my desire was so that I could free up space. Is there another simple program I can use to partition my SD?
Thanks
Ryan
I use MiniTool Partition Wizard to partition my SD cards. I like it better than GParted b/c you can format an EXT partition without any data loss on the FAT partition.
So in short my Droid Charge's SD card is screwed up.
I keep getting the message Damaged SD Card message in my notifications and I click it every time to format but then it doesnt do anything. When I try to view my photo gallery it says the sd card is blank or that there is no sd card. It wont let me use the camera because theres no sd card.
I'm rooted running Tweaked 3.0 with the latest FP5 updates after unrooting back to stock in order to get them. Tried to Odin back to stock a few times and then reflashing Tweaked a few times and still the same thing. Did factory/data reset, cache wipe, dalvik wipe a thousand times as well.
I am able to mount the sd card briefly in ClockworkMod Recovery, to view the files on the sd card but then about a minute or less later the sd card seems to unmount itself and becomes unrecognizable. Same for when I connect the phone via USB to my Windows 7 PC. If I pull out the physical sd card from the device, put it back in, hit connect to storage...the PC will recognize it for about a minute basically teasing me, letting me transfer a couple small files...and then unmounts itself and stops being read. Because of this I cant seem to partition the sd card in Windows 7 nor can I get it to complete and Check Disk.
I even bit the bullet while trying to format the sd card in CWM, and then while connect to the PC and I cant even get the card to format...
Obviously I'd prefer to some how save all the files on there before having to format if possible.
Tried searching around the forums but nothing seems to be similar to my problem. The ONLY thing I can come up with for the cause was that I mistakenly flashed the charge.PIT file while flashing Tweaked 3 in Odin. Not sure if thats the cause...
Any help and suggestions would be great. Thanks!!
It sounds to me like it's actually dead, or on its way. Try plugging it into your computer. Make note of the file name (eg F:\) Go to command prompt and type this:
Code:
chkdsk (drive letter with colon and backslash) /f /p
If that doesn't work, your last shot is probably this:
Code:
chkdsk (drive letter with colon and backslash) /r
Sent from my SCH-I510 using xda premium
Can you mount your SD card directly to your PC (i.e., pull it from your phone and use a card reader)? I've had troubles with SD cards in the past and by using a non-phone card reader have been able to save what was on the card or resurrect it back to the point of usability in the phone.
jusliloleme said:
Can you mount your SD card directly to your PC (i.e., pull it from your phone and use a card reader)? I've had troubles with SD cards in the past and by using a non-phone card reader have been able to save what was on the card or resurrect it back to the point of usability in the phone.
Click to expand...
Click to collapse
Yeah, I forgot to say be sure to do this with an SD or USB adapter rather than through your phone.
Sent from my SCH-I510 using xda premium
This actually sounds a lot like what can happen to SD cards on some HTC devices if the S-OFF goes bad. The two ways to fix it were to put it in a card reader and reformat it in Windows as FAT32, or there is a way to repartition and reformat it on the phone, but it requires you to know the pull /dev path to the SD card, and I don't know it for this phone.
Still no dice...
Ya I tried using an SD adapter that held the micro SD card, put that directly into my laptop's SD card slot and still had the same experience...it briefly reads and mounts...where i have enough time to dig few a couple folders on there and drag a couple small text docs off...then stops working.
I tried using those command prompts in CMD (chkdsk D:\ /f, chkdsk D:\ /p, and chkdsk D:\ /r) but none of them did the trick. Also the "/p" seems to be an invalid command for chkdsk? I cant seem to get it to partition in any utilities either.
Still cant format it using the adapter either in CMD or the regular Windows 7 interface.
There may also be an issue stemming from the possibility that I think its just acting as read/only. Is there a way to make it read/write? The option doesnt seem to show when i right-click on the briefly mounted sd card for its properties.
My last attempt last night was using Sandisk RescuePRO Deluxe. I started it around midnight and by 7am it was only at roughly 6.5% complete for some reason...arg.
Thoughts?
Did you try the disk management in Windows? Or diskpart?
Sent from my SCH-I510 using Tapatalk 2
I did try disk management in windows and the sd drive label wouldnt stay showing long enough for me to get that to work. I dont understand why its able to mount and then shortly after just unmount itself.
Havent tried diskpart, is that a command in CMD?
JihadSquad said:
Did you try the disk management in Windows? Or diskpart?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
ultimatdan said:
I did try disk management in windows and the sd drive label wouldnt stay showing long enough for me to get that to work. I dont understand why its able to mount and then shortly after just unmount itself.
Havent tried diskpart, is that a command in CMD?
Click to expand...
Click to collapse
Yeah its a terminal level partitioning tool.
Do I just type in "diskpart" to cmd?
JihadSquad said:
Yeah its a terminal level partitioning tool.
Click to expand...
Click to collapse
ultimatdan said:
Do I just type in "diskpart" to cmd?
Click to expand...
Click to collapse
IIRC you will want to run cmd as administrator (by right clicking on its icon in the start menu). You should also look up some sort of guide if you haven't used it before.
Ughhhh
Still not working Im getting error messages not letting me format. It will select the disk though but then when i try to go further i get "diskpart has encountered an error"
JihadSquad said:
IIRC you will want to run cmd as administrator (by right clicking on its icon in the start menu). You should also look up some sort of guide if you haven't used it before.
Click to expand...
Click to collapse
Ever tried HP USB Disk Storage Format Tool?? Its supposed to work but dont have a card reader to find out ..>(
http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml
I had the same problem with my S3 and tried to recover data from card but nothing worked. Luckily I had most of it backed up. At the end had to get a new card
Sent from my SCH-I510 using xda app-developers app
Same issue happened with my ADATA card. I was able to recover the files by wiping the SD Card in TWRP first. Then recovering the boot partions/files using TestDisk. It worked for a while but ultimately, like Lehocki said, I had to get a new card. I was able to return it and get a replacement.
Weird, I had just had the same problem and am also using Tweaked 3.0. Interesting. I also had luck recovering many files using TestDisk,,,however several files were corrupted.
Same problem.
ultimatdan said:
So in short my Droid Charge's SD card is screwed up.
I keep getting the message Damaged SD Card message in my notifications and I click it every time to format but then it doesnt do anything. When I try to view my photo gallery it says the sd card is blank or that there is no sd card. It wont let me use the camera because theres no sd card.
I'm rooted running Tweaked 3.0 with the latest FP5 updates after unrooting back to stock in order to get them. Tried to Odin back to stock a few times and then reflashing Tweaked a few times and still the same thing. Did factory/data reset, cache wipe, dalvik wipe a thousand times as well.
I am able to mount the sd card briefly in ClockworkMod Recovery, to view the files on the sd card but then about a minute or less later the sd card seems to unmount itself and becomes unrecognizable. Same for when I connect the phone via USB to my Windows 7 PC. If I pull out the physical sd card from the device, put it back in, hit connect to storage...the PC will recognize it for about a minute basically teasing me, letting me transfer a couple small files...and then unmounts itself and stops being read. Because of this I cant seem to partition the sd card in Windows 7 nor can I get it to complete and Check Disk.
I even bit the bullet while trying to format the sd card in CWM, and then while connect to the PC and I cant even get the card to format...
Obviously I'd prefer to some how save all the files on there before having to format if possible.
Tried searching around the forums but nothing seems to be similar to my problem. The ONLY thing I can come up with for the cause was that I mistakenly flashed the charge.PIT file while flashing Tweaked 3 in Odin. Not sure if thats the cause...
Any help and suggestions would be great. Thanks!!
Click to expand...
Click to collapse
Ref : Thanks!