I will give some background to begin with. I had installed the Kies mini update to the 2.2 software on my Captivate. I then rooted with super one click. I have the drivers for the Captivate installed in Windows XP and I have USB debugging enabled. It recognizes the drive and will show me the contents on the computer, but it doesn't allow me to copy from the computer to the drive. I know I can use dropbox for some things, but for other things like installing a custom rom, I would like to be able to copy to the drive. It does show as mounted and mass storage is enabled on the phone. Any ideas?
If you are rooted just go into cwr and mount sd card there. if not i have no idea as i haven't kept a phone stock since a week after i got my old Moto Droid, as soon as i found out it was possible.
Well apparently the version of Clockwork Mod Recovery that I have doesn't give the option to mount the SD card. I have 2.5.1.2. I did find a way using SGS tools to download a custom rom to the root of the SD card. I was going to reinstall Debian Linux at some point on my computer so I may have better luck with using that to write to the SD card then I am having with XP.
Yeah
Make sure that the SD card isn't locked. Also, back up everything on it to your computer and do a complete format as well. And if you're wanting to write ROMs to your SD (or CWM, etc.) in Linux, you're going to have to use dd in the terminal, and most like will be writing to "sdb".
Here's a simple walkthrough just in case you don't know how to use dd:
Become root by typing "su" and following it with your password. If you don't have a root password, type in "sudo passwd" and set it.
Next you have to unmount your microSD. To see what you have mounted type in "mount". Your SD card will most likely be called "/dev/sdb" or "/media/sdb" or something along those lines (not sdb1, that is the partition on the card). Once you know what your SD is called and where it's located, type in "umount /dev/sdb", placing '/dev/sdb' with the actual location and name of your SD card.
Now we get to use dd. Type in: dd if=<insert location of IMG here without the tags I included> of=<location of your sd without the tags I included> bs=1M
Be patient, because it usually takes a while, depending on what you're writing. Good luck mate.
I was looking for an answer to this myself. Me and my girlfriend both have the same phone, galaxy S. We both put andromeda rom on it and are now going to switch to FireFly (I did, she's trying to).
Well, mounting her USB storage ends up with the internal SD card being recognized as a CD ROM and the external as a usb storage device.
Anything we try to do to her internal says there's write protection and to disable it or use something else every time we do anything.
Only even trying this because we're getting some weird "Error at line 17: symlink with SU..." blah blah....
Completely stuck here. Doesn't make any fracking sense.
same to me. what should i do? I'm trying to install Andromeda. But I can't even copy ROM file to internal SD card. HELP ME ASAP!
Related
Hi,
everything on my SD card disappeared a day ago. It worked when I was on school, but later on the day, I got a notice about the files on my SD card couldn't be read, or it was empty. I've tested it in my pc too, nothing. I haven't formated the card. Anyone know what could have happened to it? can I fix it, or do I have to format it and start over again? (it's not such a big loss, at least now I have learned to backup my memory cards)
tbh, prob best to just format the card and get on with it. Format it in Windows first then also format it on the phone and it should be fine
and yeah, backup in future!
where can I format it in windows, it doesn't show up in my computer when I put it in. Like theres no card in the cardreader. Tried to format on the phone, and download and save a song, but the phone says "no SD card inserted" or something. Is the card broken?
If you put it in an SD card reader (via an adapter, of course) and it's not showing in (My) Computer then it sounds like its goosed
Not at all, must be the partition table which got corrupt. There's a partitioning tool in the administration toolbox in windows but it's pretty basic and i am not sure it will be able to deal with your sdcard. I would recommend Linux and the fdisk shell command, or the gparted program which has a neat GUI. Just fireup your computer with a linux livecd (i suppose even modaco's tiny linux distro should do).
cheers
I don't find any partitioning tool :/ and I have no idea what you mean with fdisk shell command, sorry
Edit* title should read "now" not "no"
I am running cyanogen on my rooted g1 and have it so I save to my sd card. I didnt know taking out the sd card is bad, but anyways i did it and now all my apps are gone and when i try to "wipe sd: ext partition" it tell me to run "wipe_ext" in console but that doesnt work. someone told me to just run "part sd: fat32+ext2+swap" and then it says to run "sdtools.sh" in console, so i did that and console says:
"Usage: /sbin/sdtools.sh [OPTION]...
Options:
-h --help Display this help
-p --print Display SD partitions
-s --split Create 500MB ext2, 32MD swap and fill remaining
-c --clean Create 1 fast32 partition"
but I dont know what to type in, I typed "-h" it doesnt do anything "--help" also nothing. what do i type into console here?
Also a g1 guru told me I might have really messed it up and have to update the partition, but how do I do this. I cannot wipe the sd from andriod OS settings, and cant seem to do it from recovery mode. Also when i plug the phone into my computer it doesnt recognize it and says to insert an sd card. The notification bar on my g1 also has the icon and notice that says "Removed SD card - SD card removed. Insert a new one." when the sd card is obviously in the g1. should I just buy a new sd card, will that fix all this!? haha
Thanks for any help.
This seems super old, and has likely already been addressed. BUUUUTTTTTT...
It sounds like you fried your SD card. This has happened to me before. Last ditch effort would be for you to get an SD adapter (either a transFlash or USB thinger), and try to format by plugging the SD card directly into your computer. If that works, then insert your SD card back into your phone, boot into recovery, and see if you can partition the card, then. If it works, you're good to go! If not, you may have to say goodbye to the card.
Hey guys,
I need a lil help! Searched all over but couldnt find a solution. So I was trying to go back to stock. I formatted my SDcard via gparted to FAT32 and rebooted my phone into bootloader. Flashed an SBF with sbf_flash. Now when my phone starts up the SD card is stuck at Preparing SD card searching for errors. If I allow my screen to time out, it gets stuck and pressing the unlock button only gives me flashing lights for the buttons below. I remember some other people having this problem but for me I think it has specifically to do with the SD card because when I remove it and boot everything seems to be fine.
So I tried connecting the phone via USB to my computer. I set the screen to never time out to avoid the black screen and flashing lights thingy. Gparted does not recognize the SDcard, when I select mass storage. Strangely the disk utility in ubuntu recognizes that something is mounted /dev/sdb/ but cannot format or anything and it doesnt show the size of the directory.
In the phone options the card is not mounted so I cannot format via the phone. I dont own a carder reader and where I live itll be really hard to find one. I tried on a windows computer but that didnt recognize the phone at all.
One thing though, I rooted the phone and I can get into adb shell. In adb it shows me an /sdcard/ directory. I was wondering is there any way I can format my SD card using adb?
Thanks for all the help! Cheers!
Never mind, I fixed it. Seems like rooting and logging into adb shell did something to mount it in the phone. Thanks!
sohrab.naushad said:
I dont own a carder reader and where I live itll be really hard to find one.
Click to expand...
Click to collapse
you could buy a card reader online...
http://www.ebay.com/sch/i.html?_fro...13&_nkw=card+reader&_sacat=See-All-Categories
Hello guys. I am a first time rooter. I followed this root guide, http://forum.xda-developers.com/showthread.php?t=1016084 all worked and I have tried 3 different roms. The only thing that faile dto work was Gparted, it does not recognise my SD card. I only see my PC HD.
I have tried restarting it, using a different SD card but still the same issue. The whole point of me rooting my desire was so that I could free up space. Is there another simple program I can use to partition my SD?
Thanks
Ryan
I use MiniTool Partition Wizard to partition my SD cards. I like it better than GParted b/c you can format an EXT partition without any data loss on the FAT partition.
So in short my Droid Charge's SD card is screwed up.
I keep getting the message Damaged SD Card message in my notifications and I click it every time to format but then it doesnt do anything. When I try to view my photo gallery it says the sd card is blank or that there is no sd card. It wont let me use the camera because theres no sd card.
I'm rooted running Tweaked 3.0 with the latest FP5 updates after unrooting back to stock in order to get them. Tried to Odin back to stock a few times and then reflashing Tweaked a few times and still the same thing. Did factory/data reset, cache wipe, dalvik wipe a thousand times as well.
I am able to mount the sd card briefly in ClockworkMod Recovery, to view the files on the sd card but then about a minute or less later the sd card seems to unmount itself and becomes unrecognizable. Same for when I connect the phone via USB to my Windows 7 PC. If I pull out the physical sd card from the device, put it back in, hit connect to storage...the PC will recognize it for about a minute basically teasing me, letting me transfer a couple small files...and then unmounts itself and stops being read. Because of this I cant seem to partition the sd card in Windows 7 nor can I get it to complete and Check Disk.
I even bit the bullet while trying to format the sd card in CWM, and then while connect to the PC and I cant even get the card to format...
Obviously I'd prefer to some how save all the files on there before having to format if possible.
Tried searching around the forums but nothing seems to be similar to my problem. The ONLY thing I can come up with for the cause was that I mistakenly flashed the charge.PIT file while flashing Tweaked 3 in Odin. Not sure if thats the cause...
Any help and suggestions would be great. Thanks!!
It sounds to me like it's actually dead, or on its way. Try plugging it into your computer. Make note of the file name (eg F:\) Go to command prompt and type this:
Code:
chkdsk (drive letter with colon and backslash) /f /p
If that doesn't work, your last shot is probably this:
Code:
chkdsk (drive letter with colon and backslash) /r
Sent from my SCH-I510 using xda premium
Can you mount your SD card directly to your PC (i.e., pull it from your phone and use a card reader)? I've had troubles with SD cards in the past and by using a non-phone card reader have been able to save what was on the card or resurrect it back to the point of usability in the phone.
jusliloleme said:
Can you mount your SD card directly to your PC (i.e., pull it from your phone and use a card reader)? I've had troubles with SD cards in the past and by using a non-phone card reader have been able to save what was on the card or resurrect it back to the point of usability in the phone.
Click to expand...
Click to collapse
Yeah, I forgot to say be sure to do this with an SD or USB adapter rather than through your phone.
Sent from my SCH-I510 using xda premium
This actually sounds a lot like what can happen to SD cards on some HTC devices if the S-OFF goes bad. The two ways to fix it were to put it in a card reader and reformat it in Windows as FAT32, or there is a way to repartition and reformat it on the phone, but it requires you to know the pull /dev path to the SD card, and I don't know it for this phone.
Still no dice...
Ya I tried using an SD adapter that held the micro SD card, put that directly into my laptop's SD card slot and still had the same experience...it briefly reads and mounts...where i have enough time to dig few a couple folders on there and drag a couple small text docs off...then stops working.
I tried using those command prompts in CMD (chkdsk D:\ /f, chkdsk D:\ /p, and chkdsk D:\ /r) but none of them did the trick. Also the "/p" seems to be an invalid command for chkdsk? I cant seem to get it to partition in any utilities either.
Still cant format it using the adapter either in CMD or the regular Windows 7 interface.
There may also be an issue stemming from the possibility that I think its just acting as read/only. Is there a way to make it read/write? The option doesnt seem to show when i right-click on the briefly mounted sd card for its properties.
My last attempt last night was using Sandisk RescuePRO Deluxe. I started it around midnight and by 7am it was only at roughly 6.5% complete for some reason...arg.
Thoughts?
Did you try the disk management in Windows? Or diskpart?
Sent from my SCH-I510 using Tapatalk 2
I did try disk management in windows and the sd drive label wouldnt stay showing long enough for me to get that to work. I dont understand why its able to mount and then shortly after just unmount itself.
Havent tried diskpart, is that a command in CMD?
JihadSquad said:
Did you try the disk management in Windows? Or diskpart?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
ultimatdan said:
I did try disk management in windows and the sd drive label wouldnt stay showing long enough for me to get that to work. I dont understand why its able to mount and then shortly after just unmount itself.
Havent tried diskpart, is that a command in CMD?
Click to expand...
Click to collapse
Yeah its a terminal level partitioning tool.
Do I just type in "diskpart" to cmd?
JihadSquad said:
Yeah its a terminal level partitioning tool.
Click to expand...
Click to collapse
ultimatdan said:
Do I just type in "diskpart" to cmd?
Click to expand...
Click to collapse
IIRC you will want to run cmd as administrator (by right clicking on its icon in the start menu). You should also look up some sort of guide if you haven't used it before.
Ughhhh
Still not working Im getting error messages not letting me format. It will select the disk though but then when i try to go further i get "diskpart has encountered an error"
JihadSquad said:
IIRC you will want to run cmd as administrator (by right clicking on its icon in the start menu). You should also look up some sort of guide if you haven't used it before.
Click to expand...
Click to collapse
Ever tried HP USB Disk Storage Format Tool?? Its supposed to work but dont have a card reader to find out ..>(
http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml
I had the same problem with my S3 and tried to recover data from card but nothing worked. Luckily I had most of it backed up. At the end had to get a new card
Sent from my SCH-I510 using xda app-developers app
Same issue happened with my ADATA card. I was able to recover the files by wiping the SD Card in TWRP first. Then recovering the boot partions/files using TestDisk. It worked for a while but ultimately, like Lehocki said, I had to get a new card. I was able to return it and get a replacement.
Weird, I had just had the same problem and am also using Tweaked 3.0. Interesting. I also had luck recovering many files using TestDisk,,,however several files were corrupted.
Same problem.
ultimatdan said:
So in short my Droid Charge's SD card is screwed up.
I keep getting the message Damaged SD Card message in my notifications and I click it every time to format but then it doesnt do anything. When I try to view my photo gallery it says the sd card is blank or that there is no sd card. It wont let me use the camera because theres no sd card.
I'm rooted running Tweaked 3.0 with the latest FP5 updates after unrooting back to stock in order to get them. Tried to Odin back to stock a few times and then reflashing Tweaked a few times and still the same thing. Did factory/data reset, cache wipe, dalvik wipe a thousand times as well.
I am able to mount the sd card briefly in ClockworkMod Recovery, to view the files on the sd card but then about a minute or less later the sd card seems to unmount itself and becomes unrecognizable. Same for when I connect the phone via USB to my Windows 7 PC. If I pull out the physical sd card from the device, put it back in, hit connect to storage...the PC will recognize it for about a minute basically teasing me, letting me transfer a couple small files...and then unmounts itself and stops being read. Because of this I cant seem to partition the sd card in Windows 7 nor can I get it to complete and Check Disk.
I even bit the bullet while trying to format the sd card in CWM, and then while connect to the PC and I cant even get the card to format...
Obviously I'd prefer to some how save all the files on there before having to format if possible.
Tried searching around the forums but nothing seems to be similar to my problem. The ONLY thing I can come up with for the cause was that I mistakenly flashed the charge.PIT file while flashing Tweaked 3 in Odin. Not sure if thats the cause...
Any help and suggestions would be great. Thanks!!
Click to expand...
Click to collapse
Ref : Thanks!
I have been having some issues when saving music to my micro SD. I am running the latest version of katkiss(and love it). I have the files on my internal SD card, then try to move them to my external SD card using root browser, of file manager HD. It looks as though the files move, but when I unmount the card, and remount, or just reboot the tablet, the files are no longer there. Maybe I am doing something wrong, just looking for some good advice.
Thanks everyone for making this tf101 awesome again!!
I would try manually from adb or console to see if you get any errors which file managers can silently suppress.
I don't have the device with me right now so I can't give you the exact path to use, but something like:
cp -a /sdcard/Music/file-or-directory* /mnt/storage/2
the paths are wrong of course, I really can't remember where they're mounted. I'll update the post when I get home unless someone can give the proper paths before then. Using cp will tell you if there's errors.
I would also try to copy files to the card on a computer, to see if you can replicate the problem there. It could just be a dying card or a messed up filesystem on it.
Lethe6 said:
I would try manually from adb or console to see if you get any errors which file managers can silently suppress.
I don't have the device with me right now so I can't give you the exact path to use, but something like:
cp -a /sdcard/Music/file-or-directory* /mnt/storage/2
the paths are wrong of course, I really can't remember where they're mounted. I'll update the post when I get home unless someone can give the proper paths before then. Using cp will tell you if there's errors.
I would also try to copy files to the card on a computer, to see if you can replicate the problem there. It could just be a dying card or a messed up filesystem on it.
Click to expand...
Click to collapse
Thanks for the reply. I may be doing something wrong i don't know. The card is brand new, and i did the FAT32 long format. The same thing happens to me when i use a USB adapter in the main connector and try to move music from my tablet to a USB drive. It looks like it moves, but as soon as I unmount, and re-mount, no files are there. I am formatting my SD and USB drives on a windows 8 laptop. I have read where some people have luck formatting NTFS, but my laptop won't even let me format my USB drive that way.
I appreciate your effort. I am sure we can get this resolved some how. Just gotta keep messin' with it.
troyvs
Is it the dock sdcard or the tablet's?
The exact command to test a copy would be (for the tablet's external sdcard):
cp -av /storage/sdcard0/file.name /storage/sdcard1/
I'm running 021 and this worked for me. The command should return something like:
/storage/sdcard0/file.name -> /storage/sdcard1/file.name
and get you back to a shell if it works. Otherwise paste the message it gives you.
If the devices work elsewhere and you're sure it's the tablet, try wiping cache and dalvik... I've seen it cause weirder issues. You could also try to do a full backup in recovery and then do a full wipe, and reflash katkiss. If it works you know it's something with the old rom, and if it doesn't you can restore the backup.
troyvs said:
Thanks for the reply. I may be doing something wrong i don't know. The card is brand new, and i did the FAT32 long format. The same thing happens to me when i use a USB adapter in the main connector and try to move music from my tablet to a USB drive. It looks like it moves, but as soon as I unmount, and re-mount, no files are there. I am formatting my SD and USB drives on a windows 8 laptop. I have read where some people have luck formatting NTFS, but my laptop won't even let me format my USB drive that way.
I appreciate your effort. I am sure we can get this resolved some how. Just gotta keep messin' with it.
troyvs
Click to expand...
Click to collapse
I have moved files from the internal SD (photographs actually as there was no option to save them anywhere else only the internal SD) to the micro SD card using the X-plore app and the ES file manager app with no problems. I did however learn that both sd cards e.g. the internal and external are just called sd card and the internal sd card is shown under Device and under Storage so it is possible to cut and paste from the Internal sd card back into the Internal sd card.
I am assuming you are referring to the sd card on the tablet and not the sd card in the dock.