Related
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
If you would have done a search here then you would have found that you need to do one of 2 things.
1. Flash back to 2.1
2. Replace the 3e recovery with one that doesnt check for the sig.
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
trontheman said:
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
Click to expand...
Click to collapse
Here is a link to the replacement recovery.
Make sure you have the right odin and that your 3 button works right.
Yesh doing this will wipe out everything. Make sure to back up. Do not back up system data at all as when you restore it, it can lead to major issues. Once done with a custom rom it will be wiped clean. You will have to redo contacts, email, and all other settings
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
To be honest I am not sure. I only had the stock on for a few hours as it was just not that great compared to the 2.2.1 rom that I have been used to running. I need BT voice dial and the added exchange options so 2.2 was not really for me. If you want a stock feel but faster then I would go with COG or one of the other roms based on the kb1 rom.
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
first flash 2.1 stock to get rid of the damn 3e. custom roms dont replace that always. also most custom roms dont flash with odin.
get a stock rom. read the instructions, flash
trontheman said:
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
Click to expand...
Click to collapse
If you are getting .zip signature errors when trying to flash a rom (because you are using 3e recovery) you will not be able to flash a kernel.
Supercurio did make a KB1 kernel that is installable via Odin. If you install that, you will also get CWM recovery. Then you can flash anything you want.
Either way you will need an Odin program. Either Odin One Click to flash back to stock 2.1 or Odin v1.7 to flash the Supercurio KB1 Kernel .tar file.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Johnnie5000 said:
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Pirateghost said:
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Click to expand...
Click to collapse
The problem is, the OP has no idea what he's doing. It sounds like he's wanting to flash to 2.1, then add a I9000 kernel. Since he's all over the place, it's hard to decipher what he's thinking.
To the OP. I'd HIGHLY suggest you look for the stickied "how to" video's by Connexxion. They will tell you what you need to do and show you EXACTLY how to do it. Invaluable info for the noobs.
Here is the link your looking for, download the installer zip file at the bottom of the first post. Extract to your fancy, use the install.bat file once extracted. Be sure to have the phone connect to the pc (DO NOT MOUNT) and have USB Debugging on.
Modded 3e recovery that works like 2e
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
I am wanting to flash back to 2.1 and go from there. I have the drivers installed and I have odin downloaded. I tried it last night, but I couldn't get it to work. I got it to download mode, but still nothing. What could the problem be? Thanks.
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Bump. Thanks.
trontheman said:
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
ok no need to flash 2.1
get neldars kernel flashing app from the market
get a kernel for froyo without 3e recovery in the dev section. this one is great
http://forum.xda-developers.com/attachment.php?attachmentid=547852&d=1300708475
use neldars app (edit) "sgs kernel flasher" or something to that effect. to flash this kernel
then flash cognition
you can also use odin3 but not the oneclick downloader without the .pit file and flash the same kernel placed in the pda slot.
when you installed keis mini, it installed new WRONG drivers (for odin)
reinstall the original other drivers.
BUT. in your OP all you wanted was to be able to flash COG or something.
ALL you have to do is fix your 3e recovery, SEVERAL people including myself have told you how to fix it. then CWM will work! you dont need a computer to fix 3e if you have root explorer (google it $) .
if you are going to flash a custom rom anyway dont bother going back to 2.1.
if you are going to stay stock, 2.2 is better anyway. (aside from 3e but staying stock dont matter)
you can also use odin3 but not the oneclick downloader without the .pit file and the same kernel placed in the pda slot.
Click to expand...
Click to collapse
@ dani - dude read the thread. odin doesn't recognize his phone.!! try to catch up before butting in...
well that doesn't make my whole post irrelivent. if he is rooted and has busy box he can use neldars kernel flasher. sorry if i over looked something.
Ok, well i got the aio toolbox, and i flashed back to stock. Now im running 2.1-update1. How do i go about rooting now? I cant seem to find a root file. Thanks.
Warning!!!! Do not flash these if
A. You dont know what you are doing
B. you have not already done a manual update to EE4
C. you do not understand what they are for
XDA, any developer, or myself are NOT responsible for anything you do to your phone.
All packages are compressed in .rar form they need to be extracted and flashed with odin. If you are a developer and just want the deodex system...well you know what to do. Also Notice Using a custome kernel on EE4 is required for root but this also write protects your sdcard for some reason so just be aware.
First package:Fully stock kernel, recovery and system(this will come in handy)
www.androphiles.com/files/android/EE4stock_DXC.tar.rar
Second package: Deodexed system, imnuts modded CWM , stock kernel (not rooted)
www.androphiles.com/files/android/EE4deodx_DXC.tar.rar
Warning having a Custom kernel Write protects your sdcard when trying to mount to your PC otherwise everything works
Third package: Deodexed system, imnuts modded CWM, jt voodoo kernel (Rooted)
www.androphiles.com/files/android/EE4dxvodo_DXC.tar.rar
Again if you need instructions on how to flash these just hold off till we can mess with this build some more.
Awesome, but, definitely holding off on this.
So we're supposed to update to EE4 before installing any of these packages?
Sweeeet. Thanks driodxcon!
Dammit, you never figured out the sdcard problem?
Sent from my SCH-I510 using XDA Premium App
Sweet thanks as always.
Kinda curious tho if we are already running your AB build with a custom kernel with Voodoo and lagfix how will we go about updating to EE4 so we don't mess up and loose root access in the process. Thanks in advance for any input.
will2live said:
Kinda curious tho if we are already running your AB build with a custom kernel with Voodoo and lagfix how will we go about updating to EE4 so we don't mess up and loose root access in the process.
Click to expand...
Click to collapse
Kind of a tedious process, but here is what I did:
1) I disabled the lagfix (create a folder called 'disable-lagfix' in /sdcard/Voodoo)
2) rebooted the phone to disable the voodoo lagfix
3) ran the stock rooted ED1 ODIN file (which I created )
4) took the OTA ED2 update and lost root
5) downloaded the EE4 update file (http://goo.gl/XTDA9) and renamed it 'update.zip' and put it on my sdcard
6) booted into recovery and applied update.zip and then let it boot
7) flashed JTs rooted voodoo kernel and his CWM in ODIN (you should probably delete the disable-lagfix folder after step 6)
NOTE: I didn't wipe at all during this process.
I have EE4 and JTs voodoo kernel and I've confirmed that I have root access.
Now it's time to get rid of this orange and brown crap... again :/
wynalazca said:
Kind of a tedious process, but here is what I did:
1) I disabled the lagfix (create a folder called 'disable-lagfix' in /sdcard/Voodoo)
2) rebooted the phone to disable the voodoo lagfix
3) ran the stock rooted ED1 ODIN file (which I created )
4) took the OTA ED2 update and lost root
5) downloaded the EE4 update file (http://goo.gl/XTDA9) and renamed it 'update.zip' and put it on my sdcard
6) booted into recovery and applied update.zip and then let it boot
7) flashed JTs rooted voodoo kernel and his CWM in ODIN (you should probably delete the disable-lagfix folder after step 6)
NOTE: I didn't wipe at all during this process.
I have EE4 and JTs voodoo kernel and I've confirmed that I have root access.
Now it's time to get rid of this orange and brown crap... again :/
Click to expand...
Click to collapse
are you able to move files onto your sdcard?
DroidXcon said:
are you able to move files onto your sdcard?
Click to expand...
Click to collapse
Yup. What stuff do you want a dump of? Just the system?
The change log
Sounds great but I'm going to wait until it's a full CWM rom.
wynalazca said:
Kind of a tedious process, but here is what I did:
1) I disabled the lagfix (create a folder called 'disable-lagfix' in /sdcard/Voodoo)
2) rebooted the phone to disable the voodoo lagfix
3) ran the stock rooted ED1 ODIN file (which I created )
4) took the OTA ED2 update and lost root
5) downloaded the EE4 update file and renamed it 'update.zip' and put it on my sdcard
6) booted into recovery and applied update.zip and then let it boot
7) flashed JTs rooted voodoo kernel and his CWM in ODIN (you should probably delete the disable-lagfix folder after step 6)
NOTE: I didn't wipe at all during this process.
I have EE4 and JTs voodoo kernel and I've confirmed that I have root access.
Now it's time to get rid of this orange and brown crap... again :/
Click to expand...
Click to collapse
so after the whole 9 yard process of getting it back to stock and then updating all the way up to EE4, when you flashed JT's voodoo kernel, you still maintained all the capabilities of the EE4 update? currently, i believe it seems that flashing a ROM like altered beast (after you've updated to EE4 from stock), makes the functions of the EE4 update disappear?
khanfuze said:
The change log
Sounds great but I'm going to wait until it's a full CWM rom.
Click to expand...
Click to collapse
You may want to reconsider as I don't believe you will get the radio/baseband update if you do not take the OTA update.
Thanks for the info folks. Guess I have some work to do this evening once I get home from work.
EE4, what is it good for?
Anyone have a changelog between ED2 and EE4? Anything mind-blowing?
cshorter said:
Anyone have a changelog between ED2 and EE4? Anything mind-blowing?
Click to expand...
Click to collapse
Dude it's literally like 6 posts above your post.
teddykgb715 said:
Dude it's literally like 6 posts above your post.
Click to expand...
Click to collapse
what fail to read through the thread. /sigh
wynalazca said:
Kind of a tedious process, but here is what I did:
1) I disabled the lagfix (create a folder called 'disable-lagfix' in /sdcard/Voodoo)
2) rebooted the phone to disable the voodoo lagfix
3) ran the stock rooted ED1 ODIN file (which I created )
4) took the OTA ED2 update and lost root
5) downloaded the EE4 update file (http://goo.gl/XTDA9) and renamed it 'update.zip' and put it on my sdcard
6) booted into recovery and applied update.zip and then let it boot
7) flashed JTs rooted voodoo kernel and his CWM in ODIN (you should probably delete the disable-lagfix folder after step 6)
NOTE: I didn't wipe at all during this process.
I have EE4 and JTs voodoo kernel and I've confirmed that I have root access.
Now it's time to get rid of this orange and brown crap... again :/
Click to expand...
Click to collapse
Is booting into stock recovery the same 3 button combo as booting to CWM?
Wynalazca....
The link for the EE4 Update is labeled E2 update. Is this the correct file?
Sent from my voodoo Droid Charge ED2
Well I followed the process outlined above, but I lost root. Oh well.
will2live said:
You may want to reconsider as I don't believe you will get the radio/baseband update if you do not take the OTA update.
Thanks for the info folks. Guess I have some work to do this evening once I get home from work.
Click to expand...
Click to collapse
So a radio cannot be flashed?
khanfuze said:
So a radio cannot be flashed?
Click to expand...
Click to collapse
Currently I don't believe so but I am new to Samsung stuff. However I'm sure it wil lget worked out sooner or later tho.
teddykgb715 said:
Is booting into stock recovery the same 3 button combo as booting to CWM?
Click to expand...
Click to collapse
Yes.
Keighles said:
Wynalazca....
The link for the EE4 Update is labeled E2 update. Is this the correct file?
Sent from my voodoo Droid Charge ED2
Click to expand...
Click to collapse
Yes.
I have rooted my charge on ED1. I dont have CWM or anything installed. I am wanting to update to EE4 and reroot it. I have been reading but finding different answers. My question is can I just take the OTA update and then reroot the charge?
bama9393 said:
I have rooted my charge on ED1. I dont have CWM or anything installed. I am wanting to update to EE4 and reroot it. I have been reading but finding different answers. My question is can I just take the OTA update and then reroot the charge?
Click to expand...
Click to collapse
What I did was use ODIN and flash the full ED2, accept the OTA and then root once on EE4.
ED2
Is ED2 the update before the EE4 update? Also thank you for your quick responce.
dhemke17
I cant find the ED2 update that you would use with oden. I found the ED2 update zip file that you would use with cwm. Could you please point me in the right direction for the download for the ED2 that you would use with oden.
bama9393 said:
I cant find the ED2 update that you would use with oden. I found the ED2 update zip file that you would use with cwm. Could you please point me in the right direction for the download for the ED2 that you would use with oden.
Click to expand...
Click to collapse
Easiest way possible.
Go Here http://forum.xda-developers.com/showthread.php?t=1096657
Download the first rom (THE ONE WITH THE BURNING DOWNLOAD)
This is ED2 to be flashed using ODIN.
Use the second download of the rom. ( THE ONE WITH THE SPINNING FLOPPY DISK. NOT THE BURNING DOWNLOAD)
The second version is EE4 to be flashed with CWM.
Pull battery, plug OEM Cable into phone. Hold Vol Dn button and plug into PC. Replace battery. Open ODIN3. You will see a yellow box show up on your Odin showing you are connected and in Download mode.
Using the AlteredBeast download you just grabbed.
Click PDA. Browse to the .tar file. click ok (MAKE SURE YOU ARE ON PDA)
click start and let ODIN do it's thing.
Should get Passed 6:30 (or something around there) when done.
From here you have CWM+ROOT+VOODOO
Now you can flash any "FROYO" rom you want.
I would suggest staying away from the Gingerbread Roms from now as we are still testing them.
i am in a similar position. i have rooted ed1 and wanted ee4. i do not want a custom rom. why is it suggested to go ed1 to ed2 then ee4. can i just do ee4 ota and then root. my only problem is that i see no root for ee4 listed in the sticky thread. i currently don't want lagfix or voodoo just stock rooted ee4. the rooted ee4 thread listed in the sticky is old and has bad links
drewcam88
I am in the same boat you are in. I am still looking. If I find anything I will let you know. My thunderbolt was easier to root then this. lol
I honestly don't understand why you all are having such a hard time with this.
If you want a rooted stock rom. sorry the closest you will get is the EE4 Debloated 4.2.1 rom. If you follow the instructions i gave you, then you can flash the EE4 Debloated rom from within CWM.
Part of the rooting process is having CWM. If you don't want voodoo, then you have other options that you can find by searching from the main page "CWM UPDATE".
Hope this helps.
Sorry for the confusion. But I have been able to root the last stock roms of previous phones so I didn't understand why a custom is needed. I now understand that there seems to be no root for the stock ee4 rom. So you are saying just flash the custom ee4 rom and be done with it? Does doing the OTA for ee4 remove root?
Yes sir. The OTA pushes will return your phone to unrooted stock. Basically like using ODIN to flash the stock.
Just follow this guide
http://forum.xda-developers.com/showthread.php?t=1122657
As long as you follow it word for word(which is very easy as it's noob-proofed) you will have absolutely no trouble. Just get your phone to stock EE4 by accepting the OTA download and follow the guide, you'll be rooted and lagfixed(if you want to lagfix, but why wouldnt you?!)in about 30minutes.
so i don't seem to have root. i got cwr, kernel, and Rom installed but no apps have root. superuser was installed with Rom. now what???
drewcam888 said:
so i don't seem to have root. i got cwr, kernel, and Rom installed but no apps have root. superuser was installed with Rom. now what???
Click to expand...
Click to collapse
Then you are rooted. I'm not exactly sure what you thought was going to happen. You can now dl apps that are reserved for rooted phones. Regular apps do no need superuser to run. The apps will tell you in the description if it needs the superuser rights or not.
If you want to test it out the simple way.
Download Android Terminal Emulator.
at the "$" prompts type in : su (lowercase letters as linux is case sensitive)
if your prompt changes to "#" Then you are rooted.
dude I was not rooted. all root apps would not run. I tried a new kernel and that fixed the issue
http://forum.xda-developers.com/showthread.php?t=1172182
Boosh.
Sent from my Droid Charge running Humble 1.4
Can someone please post a link on how one goes about rooting their phone now that superoneclick does not work after GB update? I didn't root before the update, and just tried to go through the process but to no avail. I really want to start flashing roms and unlock the power of the phone now that I have seen GB.
correct me if im wrong but i think you need to flash a rom that has root already.
as of right now you cannot root GB.
Run nvflash from the Dev section. Follow the instructions closely. There is a video available. Then flash xboarders rom. Then you will have a rooted updated rom.
Beggars1923 said:
Can someone please post a link on how one goes about rooting their phone now that superoneclick does not work after GB update? I didn't root before the update, and just tried to go through the process but to no avail. I really want to start flashing roms and unlock the power of the phone now that I have seen GB.
Click to expand...
Click to collapse
First, download the rooted GB 2.3.3 ROM and copy it onto your SD card
http://forum.xda-developers.com/showthread.php?t=1179748
You won't be able to root with Superoneclick or any other rooting app. The easiest and fastest way to go about this is to flash CWM via NV flash.
http://forum.xda-developers.com/showthread.php?t=1056847
After flashing CWM reboot in recovery mode and flash the rooted ROM and voila!
You have the newest baseband and a rooted GB phone.
P.S. To be honest, I think the only reason that makes it worth going through all this trouble is being able to flash the new baseband on your phone.
Good Luck!
rvdangel630 said:
correct me if im wrong but i think you need to flash a rom that has root already.
as of right now you cannot root GB.
Click to expand...
Click to collapse
That is the easiest way to get root access.
Thank you all! So I'll be able to flash CM7 after this?
Also, I would assume devs are working on a way to use superoneclick, am I wrong?
NrikeCalderon said:
First, download the rooted GB 2.3.3 ROM and copy it onto your SD card
http://forum.xda-developers.com/showthread.php?t=1179748
You won't be able to root with Superoneclick or any other rooting app. The easiest and fastest way to go about this is to flash CWM via NV flash.
http://forum.xda-developers.com/showthread.php?t=1056847
After flashing CWM reboot in recovery mode and flash the rooted ROM and voila!
You have the newest baseband and a rooted GB phone.
P.S. To be honest, I think the only reason that makes it worth going through all this trouble is being able to flash the new baseband on your phone.
Good Luck!
Click to expand...
Click to collapse
I keep seeing this same reply and wondering... Can't someone make the necessary root files a flashable zip and then we don't have to flash a whole ROM to attain root?
Actually, so far they can't. The way you get root on your phones is by finding a security exploit so you can write a few files, and busybox simlinks to the system. Then, it installs superuser. No roms are rooted on android by default (well, stock ones anyways.) Since all the current methods to root a gingerbread rom don't work on the new update, this is the only way to do it for now.
I just finished putting on Clockwork recovery after the OTA and then flashed Imosyen's 4.0 kernel. During the process I heard the Voodoo stuff take place, but upong rebooting my phone I don't have root. I read in these boards on the EE4 OTA that this should have worked, any ideas and has anyone got thier phone rooted on the new OTA?
Thanks.
luckdog said:
I just finished putting on Clockwork recovery after the OTA and then flashed Imosyen's 4.0 kernel. During the process I heard the Voodoo stuff take place, but upong rebooting my phone I don't have root. I read in these boards on the EE4 OTA that this should have worked, any ideas and has anyone got thier phone rooted on the new OTA?
Thanks.
Click to expand...
Click to collapse
Try getting back into CW recovery and let me know how that goes. If so then just download superuser and you got it.
No root
I can boot into CWR after using ODIN to put it on once and under voodoo controls app it shows my phone as being voodoo on all partitions, just don't have root. I knew the OTA would kill root, was just hoping thier was a quick fix out there like just flashing a kernel. The phone is pretty snappy though with imoysens kernel running voodoo and using ADW as the launcher. Like what I see so far.
luckdog said:
I can boot into CWR after using ODIN to put it on once and under voodoo controls app it shows my phone as being voodoo on all partitions, just don't have root. I knew the OTA would kill root, was just hoping thier was a quick fix out there like just flashing a kernel. The phone is pretty snappy though with imoysens kernel running voodoo and using ADW as the launcher. Like what I see so far.
Click to expand...
Click to collapse
Someone didn't read the instructions for properly installing the leaked OTA?
BEFORE YOU ODIN BACK TO EE4, MAKE SURE YOU HAVE THE SU FLASHABLE ZIP, THE OTA UPDATE AND IMOSEYON'S KERNEL ON YOUR SDCARD!
Make sure the update file is renamed to "update" and that it's on the root of your sdcard. (not in any folders or anything)
Odin back to EE4. Reboot normally.
Turn the phone off, then reboot into Stock Recovery and run the update.
Once the update finishes and the phone boots regularly. Reboot into Download Mode and plug the phone into the computer.
Start Odin, Uncheck "Auto Reboot", select PDA, NOT PHONE!
Click on the PDA tab and find your recovery file then click "start."
Once it is done and you see the word "PASS" on Odin, unplug the usb cable and press down all three buttons to boot into recovery (volume up, home, power)
Once in recovery, wipe cache, wipe dalvik, mount /system and flash the SU flashable zip.
Go back and wipe cache and dalvik again, mount /system again and flash the kernel.
After that, your recovery will stick and you're good to go. You are now rooted and running on EP4D.
Here is the flashable Super User zip. http://www.multiupload.com/V6R1RZJPXV
luckdog said:
I just finished putting on Clockwork recovery after the OTA and then flashed Imosyen's 4.0 kernel. During the process I heard the Voodoo stuff take place, but upong rebooting my phone I don't have root. I read in these boards on the EE4 OTA that this should have worked, any ideas and has anyone got thier phone rooted on the new OTA?
Thanks.
Click to expand...
Click to collapse
Did you install superuser? I bet you are rooted, but you don't have the tools installed to use it.
Sent from my SCH-I510 using Tapatalk
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Thanks!!! Rooted
spc_hicks09,
Thanks sir, I started from CWR and followed the instructions and it worked! The original instructions I got yesterday didn't have any information on rooting, just on how to install the update. I appreciate the help and if the "spc" in your username represents a military rank, thanks for serving!
luckdog said:
spc_hicks09,
Thanks sir, I started from CWR and followed the instructions and it worked! The original instructions I got yesterday didn't have any information on rooting, just on how to install the update. I appreciate the help and if the "spc" in your username represents a military rank, thanks for serving!
Click to expand...
Click to collapse
You're very welcome for the instructions! Yes the Spc in my name is my rank and thank you for your support!
most if not all root issues can be fixed by simply flashing superuser in CWM (you can get the latest .zip from the dev ChainsDD's superuser site), then downloading/updating it in the market if it doesn't show up
blazing through on my 4G Droid Charge
If interested, the CWM version found here is already rooted.