I tried flashing cyanogenmod 7 to my cappy and i followed the instructions.. i flashed the kernel using oden and now i cant get into download or recovery(3 button combo doesnt work) then i tried adb reboot download and it still went back to the galaxy s cyanogenmod screen.. please help. I have this really bad feeling I'm not gonna be able to get this fixed.
Try pulling your battery, plugging in USB, holding the 2 volume keys and replacing the battery.
If that doesn't work, build or buy a jig, which is a hardware piece that can get you into download mode. Search Development for a how-to on that.
mobile sig: I897/Cognition 4.1.1/speedmod k13c/UGJK4 using xda app.
delugeofspam said:
Try pulling your battery, plugging in USB, holding the 2 volume keys and replacing the battery.
If that doesn't work, build or buy a jig, which is a hardware piece that can get you into download mode. Search Development for a how-to on that.
mobile sig: I897/Cognition 4.1.1/speedmod k13c/UGJK4 using xda app.
Click to expand...
Click to collapse
It took me to the same screen. ughh.. this sucks. I should have never tried to flash CM7 I was doing fine with Continuum
You used Odin one click and your combo buttons not longer work. Get a jig and don't use the one-click flasher (at least not that one) again.
ibrutalfatei said:
It took me to the same screen. ughh.. this sucks. I should have never tried to flash CM7 I was doing fine with Continuum
Click to expand...
Click to collapse
Flash a 2.2 kernel using SGS Kernel Flasher by Neldar (from the market)
Maybe then you can get a recovery running.
mobile sig: I897/Cognition 4.1.1/speedmod k13c/UGJK4 using xda app.
delugeofspam said:
Flash a 2.2 kernel using SGS Kernel Flasher by Neldar (from the market)
Maybe then you can get a recovery running.
mobile sig: I897/Cognition 4.1.1/speedmod k13c/UGJK4 using xda app.
Click to expand...
Click to collapse
I can't even get it to boot up.. I'm stuck at Galaxy S Cyanogenmod Screen. I have tried the 3 button combo and ADB.. when i used adb, it just rebooted the phone and went to the same screen instead of going into download mode or recovery.
ibrutalfatei said:
I can't even get it to boot up.. I'm stuck at Galaxy S Cyanogenmod Screen. I have tried the 3 button combo and ADB.. when i used adb, it just rebooted the phone and went to the same screen instead of going into download mode or recovery.
Click to expand...
Click to collapse
The only way to get into recovery or download mode with CM7 is via button combos (which the one-click flasher disables for most batch 1008 and newer phones). The CM7 install requires that you use the combo to get into recovery prior to flashing <DEVICE>-efsbackup.zip, so if you tried that it should have been obvious at that point that something was wrong. It's not really possible to follow the instructions and get the CM7 kernel installed if your button combos don't work.
opcow said:
The only way to get into recovery or download mode with CM7 is via button combos (which the one-click flasher disables for most batch 1008 and newer phones). The CM7 install requires that you use the combo to get into recovery prior to flashing <DEVICE>-efsbackup.zip, so if you tried that it should have been obvious at that point that something was wrong. It's not really possible to follow the instructions and get the CM7 kernel installed if your button combos don't work.
Click to expand...
Click to collapse
I didn't even think about that. ugh.. before i flashed efsbackup.zip I rebooted into recovery.. oh well, guess I'm SOL.
I bought a Jig for it, hopefully that does the trick. Thanks for the help though XDA buddies.
Stuck in Recovery mode
Moving questions to the CM7 Q&A
Related
Hi,
My phone stuck in CWM-based Recovery v5.0.2.3 blue screen.
I searched alot in this forum and google, every one said to use ODIN to get back to stock,
I tried ODIN recovery to get back to stock, by my PC doesnt recognize my device (because ODIN requires device to be in download mod). So how can I fix this? Please help me.
Thanks in advacne
atrix4nag said:
Hi,
My phone stuck in CWM-based Recovery v5.0.2.3 blue screen.
I searched alot in this forum and google, every one said to use ODIN to get back to stock,
I tried ODIN recovery to get back to stock, by my PC doesnt recognize my device (because ODIN requires device to be in download mod). So how can I fix this? Please help me.
Thanks in advacne
Click to expand...
Click to collapse
You can't pull the battery and do the 3 button trick to gain download mode?
Sent from my SGH-I997 using xda premium
nash2000 said:
You can't pull the battery and do the 3 button trick to gain download mode?
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
When I do that, still it opens in CWM mode only..
atrix4nag said:
When I do that, still it opens in CWM mode only..
Click to expand...
Click to collapse
First... what where you doing to get it on blue cmw in the first place?
Also im not saying you are doing it wrong... and im SURE you have tried like 1000 times but lets check:
1.-pull battery out
2.-connect cable to PC and to phone
3.- while connected to PC and battery OUT press BOTH volume keys at same time
4.-while pressing both volume keys and conected to pc trough micro usb introduce the battery
Thats how you go into DL mode... if it DOESNT.... damn... you messed up your bootloader? at the VERY least you should get a:
"Phone-----!-----Computer"
sign....
Not working still? hmm get an usb jig on ebay/amazing or anyplace you like to FORCE the DL mode... still try the steps i provided before... when entering DL mode only 2 buttons nedded not 3 like on CMW recovery read the steps... then try... try.... and try.
If nothing yet:
http://www.ebay.com/itm/Samsung-Gal...Accessories&hash=item3cbb7b1e8c#ht_2419wt_905
or something similar... yet im 99% sure doing the correct steps should work.
And i repeat... im not saying your doing it wrong... electronic devices may fail anytime still... put the human part to work and read well the instructions and do them as said before we can blame a piece of metal/plastic xD
I really hope you can get it fixed.
Thanks for the detail steps koriotto.. I exchanged at ATT.
2 finger/usb...that dude's phone would have been easily fixed but you told him how to get into something he was already stuck in haha
Sent from my B.A. Infuse 4G
atrix4nag said:
Thanks for the detail steps koriotto.. I exchanged at ATT.
Click to expand...
Click to collapse
Bah =) well you got a working phone now... remember cwm its 3 button, dl mode its 2 and usb connected for next time
I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
calvzzz said:
I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
Click to expand...
Click to collapse
Try this.
Basically do what youre doing but instead of keeping on holding to it, hold on to Volup+voldown+power for 2 reboots, then on the 3rd reboot, the gs4g screen in the beginning lights up a slight lighter than usual. Let go of the power button, See if this works.
Sent from my SGH-T959V using XDA Premium App
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
calvzzz said:
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
Click to expand...
Click to collapse
Download the Odin KJ1 version.
Just making a quick check. You ARE using a galaxy s 4g right? if so, then from that link, download the kg4.tar from the odin section. Then flash via odin. .
-edit.- listen to fbis. Hes more experianced than me.
I personally used the kg4. cause that was all there was back then. Ahaha. Glw flashing
Sent from my SGH-T959V using XDA Premium App
WOOOO got it to work!!! thanks again for all the help!!!! hahah I would've just sat around playing with my phone all night if it weren't for the help
.
Sent from my SGH-T959V using XDA Premium App
Hi I have the same problem but I still cant get into recovery, I go straight into Download mode. Please Help
It might be because your phone is connected to the computer? If so, try disconnecting it
No its not that, I can access it without it being connected to a computer.http://forum.xda-developers.com/showthread.php?t=1183413
This thread says the original GB rom changed the key mapping. Any ideas on where I can find a fix. I think thats what happened to me.
hmm I'm still relativley new to this kind of stuff as well, so the only route I know that you can do that will most likley fix the problem is to odin to a newer rom, perhaps the one I have linked above, then odin the kernal as well to get it rooted and follow the guide on how to do it if you're confused. Then turn off your phone, hold (volume up + volume down + power), screen should boot up then dissapear, boot up again, then disappear, and on the third boot up, just release the power button but continue holding on to the volume up + volume down buttons and just wait. The cwm screen should come up from what I experienced on two different sgs4g's. Hope that helps somewhat lol. I'm sure there might be a easier way to just fix the key mapping but I'm not to sure on how to do it. gl
I just verified that method works for me as well. I'm lazy, though, and downloaded Quick Boot from the app store as it lets you boot into recovery or download mode. Less fuss.
Hey community.
Long time lurker, first time poster.
Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there.
i'm assuming its perm bricked at this point, unless you have suggestions.
Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms.
Any help would be appreciated.
Just checking, have you tried this?:
Remove the battery, and disconnect USB.
Hold, and continue to hold both volume keys.
Continue to hold vol. keys, connect USB.
Insert battery and continue to hold vol. keys for awhile.
That should put you in download mode.
Sent from my SGH-I997 using Tapatalk 2
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
BaconTelevision said:
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
Click to expand...
Click to collapse
Lol next time try heimdale. It for me anyways works first try all the time. I only use Odin when i have to, other then that i always use heimdale. Make sure when you use heimdale plug your phone into another port. Ive figured out that a usb port only recognizes the phone a certain way, as heimdale uses different drivers that you install. On my laptop i have two ports that i do not usually use (one is dedicated to a bluetooth dongle/mouse) so one is set up for odin, the other for heimdale.
Yeah heimdall is the way to go...don't even need drivers...it uses its own special drivers that it will download for you if you don't already have them
Heimdall never fails me...but Odin...well Odin is kinda iffy
Sent from my SGH-I997 using XDA
Heimdall unbricked me twice
Sent from my SAMSUNG-SGH-I997 using XDA
How ?
10 Ch.
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
How....what do you mean how?
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
You talking to me?
Sent from my SAMSUNG-SGH-I997 using XDA
Oppps i am sorry guys i was posting this somewhere else.
rkkaranrk said:
Oppps i am sorry guys i was posting this somewhere else.
Click to expand...
Click to collapse
Lol that's alright.
Sent from my SAMSUNG-SGH-I997 using XDA
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Kdog71588 said:
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Click to expand...
Click to collapse
That's the method I used too.
Sent from my SAMSUNG-SGH-I997 using XDA
BaconTelevision said:
Hey community.
Long time lurker, first time poster. Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there. i'm assuming its perm bricked at this point, unless you have suggestions. Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms. Any help would be appreciated.
Click to expand...
Click to collapse
ok I lost my self here...Bacon...did you resolve your issues...??
bigjoe2675 said:
ok I lost my self here...Bacon...did you resolve your issues...??
Click to expand...
Click to collapse
I don't think he did
Sent from my SAMSUNG-SGH-I997 using XDA
samsung i997 bootloop no bootloader solution
Dear guys i'm not saying this will be everybody's case but in my shop we got two of this phones with the issue mentioned above, in the two cases the issue was caused by faulty power button, so before you format or flash your samsung i997 i'll advice to go to youtube search for a diassemble video for your phone take out the main board and with your tester verify that your power button is working properly. If not try to replace the power button. i have soved the two cases that way.
Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Laramie1997 said:
Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Click to expand...
Click to collapse
Since I'm in a similar situation have you tried using odin
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I can't put it in download mode, so I can't use ODIN...
sorry i did see that lol what i ment to ask was can you get into the recovery
joka10 said:
sorry i did see that lol what i ment to ask was can you get into the recovery
Click to expand...
Click to collapse
No I can't unless I'm missing something other than power/volume up and down/home button at the same time...
try this instead press all three at the same time volume up, home, and power
joka10 said:
try this instead press all three at the same time volume up, home, and power
Click to expand...
Click to collapse
That's what I've been doing.
Laramie1997 said:
That's what I've been doing.
Click to expand...
Click to collapse
If you have a custom rom still on your sd card, try booting into recovery volume up+home+power and wipe data/ factory reset and then install zip from sdcard.choose your rom and flash.. that should be able to get you to boot up again. I had to do this when my phone would boot up and go blank after the sgs3 logo screen.
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
sorry you thru me off in your post above i thought you saying that you pressing all four my mistake but you can go here http://webchat.freenode.net/?channels= and for the channel use either #verizons3 or #verizons3-dev, they can also help you but of course stay on this thread to.
mustbepbs said:
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
Click to expand...
Click to collapse
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
It makes sense for some phones, but it doesn't make sense that you're unable to get into download mode. Regardless of the incorrect kernel, you should be able to get into download/recovery mode. What is your device registered as when you plug it into your machine (such as QHSUSB_DLOAD)? Are you running Windows/Mac/Linux?
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
mikejr83 said:
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
This is your best bet if nothing else is working. I bought one from China on eBay last year for my GNex. I'm glad I've always got it.
Yea, I ended up having to jig it this morning when I got to the office and had access to my other tools. THAT got it into Download mode and allowed me to flash it back to stock. Bizzare evening for sure.
Thanks for all the help!
For the record...
To get into DOWNLOAD mode you hold home, power, and volume DOWN.
Volume up is for recovery.
Hope that helps.
I've seen the samething
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I've seen the same issue, I was on Senergy and then tried to test CM10, I didn't like it and I went back to Senergy and I flashed it like normal way, however my phone stack on Samsung logo, after 15 minutes pressing all buttons then I was finally able to get recovery, reflashed senegy and it was alright, I Had very less battery, it could be that but not sure..
maybe
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
yeah that's right
Same problem
I had this same problem for a AT&T gs3 but I think my battery died and when I plug it in it won't charge. How can I fix that charging problem and then the start up problem?
I just got a new Verizon S3 about a week ago and a few days ago I followed the instructions in the Original development section to install the CM10 nighties. Everything was working great but just a little bit ago I tried to upgrade to the newest build through the clockworkmod rom manager that was installed with cm10 but now when I restart the phone just constantly boot loops. It shows the samsung screen followed by samsung screen (but with booting recovery at the top) and finally the android dude for a few secs then just repeats! How do I fix my phone! Or did I F**K myself good?
vanattab said:
I just got a new Verizon S3 about a week ago and a few days ago I followed the instructions in the Original development section to install the CM10 nighties. Everything was working great but just a little bit ago I tried to upgrade to the newest build through the clockworkmod rom manager that was installed with cm10 but now when I restart the phone just constantly boot loops. It shows the samsung screen followed by samsung screen (but with booting recovery at the top) and finally the android dude for a few secs then just repeats! How do I fix my phone! Or did I F**K myself good?
Click to expand...
Click to collapse
Odin back to stock
vanattab said:
I just got a new Verizon S3 about a week ago and a few days ago I followed the instructions in the Original development section to install the CM10 nighties. Everything was working great but just a little bit ago I tried to upgrade to the newest build through the clockworkmod rom manager that was installed with cm10 but now when I restart the phone just constantly boot loops. It shows the samsung screen followed by samsung screen (but with booting recovery at the top) and finally the android dude for a few secs then just repeats! How do I fix my phone! Or did I F**K myself good?
Click to expand...
Click to collapse
Can you get into recovery (volume up + home + power) to try flashing a previous rom download or restore a backup? If that doesn't work, you'll probably need to Odin your way back to stock or stock.root66 (http://forum.xda-developers.com/showthread.php?t=1762709)
PJnc284 said:
Can you get into recovery (volume up + home + power) to try flashing a previous rom download or restore a backup? If that doesn't work, you'll probably need to Odin your way back to stock or stock.root66 (http://forum.xda-developers.com/showthread.php?t=1762709)
Click to expand...
Click to collapse
Ok I was able to get into recovery. I tried restoring a backup but that did not help I am now going to try and re install the downloaded rom. I might just odin back to stock I don't know if my nerves can handle the stress of this mod thing.
I tried installing from downloaded rom and that did not work ether. I down loaded the odin and the Samsung drivers but the drivers don't seem to be installing right. The phone shows up under devices and printers but has an ! on it. I tried telling it to update the driver by had but I got this error:
Code:
Windows found driver software for your device but encountered an error while attempting to install it
SAMSUNG Mobile MTP DEVICE
This device cannot start (Code 10)
I have the device booted in to recovery ClockworkMod Recovery because thats the only place I can get it with out it continually restarting. (I thought that the Recovery I had was called K-exec or somthing? It looks the same I think though so I am not sure. Is that what broke my system did I break somthing my flashing ClockWorkMod recovery over K-exec? Can I fix that from clockWorkMod Recovery. HELP
Odin back to stock to be safe.
Sent from my SAMSUNG-SGH-I717.
joeyu629 said:
Odin back to stock to be safe.
Sent from my SAMSUNG-SGH-I717.
Click to expand...
Click to collapse
How can I odin back to stock if I can't get the driver to install? Can I odin while in the booted clockworkmod recovery menu?
vanattab said:
How can I odin back to stock if I can't get the driver to install? Can I odin while in the booted clockworkmod recovery menu?
Click to expand...
Click to collapse
Did I have to have odin installed on my phone before hand??
vanattab said:
Did I have to have odin installed on my phone before hand??
Click to expand...
Click to collapse
/facepalm
Odin is a PC program. You need to go into download mode to connect to it and flash back to stock.
Vorfidus said:
/facepalm
Odin is a PC program. You need to go into download mode to connect to it and flash back to stock.
Click to expand...
Click to collapse
I don't think I can get into download mode(If thats the thing with the yellow triangle) you do that with (vol up+power+home) right. Then I press that combo I go to ClockworkMod Recovery v5.8.4.8. I think I have tried most all the options from there.
vanattab said:
I don't think I can get into download mode(If thats the thing with the yellow triangle) you do that with (vol up+power+home) right. Then I press that combo I go to ClockworkMod Recovery v5.8.4.8. I think I have tried most all the options from there.
Click to expand...
Click to collapse
From the sounds of it you should have never attempted any of this, download mode is volume down + home + power.
Sent from my SCH-I535 using xda app-developers app
vanattab said:
I don't think I can get into download mode(If thats the thing with the yellow triangle) you do that with (vol up+power+home) right. Then I press that combo I go to ClockworkMod Recovery v5.8.4.8. I think I have tried most all the options from there.
Click to expand...
Click to collapse
Ok never mind download mod is down arrow. I read the web page wrong. Whats more is I was able to install drivers once I entered download mode so it looks like I might be alright. I am downloding stock rom now and will update you all soon. Thanks for your help and patience with my n00bness
actually download mode is hold volume down +home (button on the front in center) + power till the screen shows download mode
edit: posted this same time you figured it out lol
bc760 said:
From the sounds of it you should have never attempted any of this
Click to expand...
Click to collapse
Probably true or at least I should have done my homework first.
we all learn somewhere. funny how thought of a brick gets people researching more than they normally would, right? lol, all been there
Upgrade your recovery from cwm touch to cwm 6.whatever.it.is. Cwm touch is buggy. I don't know how exactly you do that if it's not booting to the rom but maybe this can help point you down the right path.
Sent from my SCH-I535 using xda app-developers app
psycopanther said:
learn somewhere. funny how thought of a brick gets people researching more than they normally would, right? lol, all been there
Click to expand...
Click to collapse
Downside of all the one click this and one click that. You should be required to root at least once using odin and adb before having access to the one click tools as you may end up needing those down the road.
Ok guys I got my phone back up and running! http://forum.xda-developers.com/images/smilies/good.gif Thanks for the help! However the bloatware that popped up right away is about enough to make me risk flashing 4.1 again.
vanattab said:
Ok guys I got my phone back up and running! http://forum.xda-developers.com/images/smilies/good.gif Thanks for the help! However the bloatware that popped up right away is about enough to make me risk flashing 4.1 again.
Click to expand...
Click to collapse
If you really don't wanna take the risk you can just delete it all with Titanium Backup. But hey, if you really want to, go right ahead. Just do a little more research before you jump in. We've all been there, though, so don't feel stupid.
PJnc284 said:
Downside of all the one click this and one click that. You should be required to root at least once using odin and adb before having access to the one click tools as you may end up needing those down the road.
Click to expand...
Click to collapse
i agree. more community is informed, faster we all progress