Related
Yup i signed up as i have a problem, The phone model is s710 which im guessing by the looks of it is this one. Heres the problem, My brother gave me his htc phone with this rom file from this site on ,Dont ask me what one as i dont know but basicly it fails completly, its so slow its unbarable to use and near impossible. But i cant re do the rom to another one without the activesync drive for the phoneas he didnt give me the cd, Does any one know where i can get the driver.. I have the newest active sync installed.
Thatnks Tom2oo8
hey tom. try this when u have downloaded the rom u like, i assume u want a factory rom so download it from htc. or from the ftp here...
turn off your phone
press the camera button
plug the usb wire
be amazed by the 3-color screen
ok now your phone is recognized for flashing a rom.
You can get the active sync at download.microsoft.com go to the windows mobile section and you should find it!
If you also get the lastest active sync...divers are not necessary...couse it is detected as generic RNDIS by Windows...
I finally got connect between my HTC Touch Pro and OSX (parallels + Activesync)
I am trying to run RaphaelHardSPL-Unsigned_190_1_3 and everything goes well, but when it trys to connect to the device to start the mod, i get Error [202] Connection. I have tried enabling/disabling Advaned Network Funtionality in Connection settings, but that did not help. I have tried manually going into bootloader (when the transfer is about to start, I hold VolDown, and reset, and wait for Bootloader to go into USB mode). That didn't work for me.
My question(s) are, how can I get the HardSPL running, or how can I get my deviced flashed in general (SD method didn't work)
AND: My version in HARDSPL is stated to be 1.95.502.5. Is it OK if I downgrade to 1.90.1.3 in order to allow custom ROMs?
Thanks in advance.
Parallels doesn't play nice with the USB bridge.
Try boot-camp (works for me).
I crashed my first Kaiser, flashing with Parallels. Couldn't recover it after the usb connection cut out mid flash. I sent it in for warranty exchange, telling them it crashed while doing an " official " rom update. luckily no one looked too close and they sent me a replacement.
Now I only use Bootcamp and xp. And after more flashes than I can count, I have never had a problem.
Hello guys
last week my Tytn II decide to also get stuck at the bootscreen. It had been running more than a year with one of Dutty's ROMs without any problems at all. Fortunately I knew this forum so I didn't really panic but started reading possible solutions to the problem.
Flashing new OS or SPL via USB didn't work. Nor was I able to connect via mtty to give the boot command. I finally got it back working by flashing KAISDIAG.NBH and after that flashing RUU-356-patch-nostuckinSPL-FORCEUSB as KAISIMG.NBH both via the SD method. After that I have downloaded and flashed the latest standard HTC rom & radio. The device boots and can make calls.
However whenever it is connected to a pc it just freezes. Or at least becomes so slow there's nothing that can be done with it. Activesync connection cannot be established. Note, this does not happen if the device is connected to my car charger or to another USB charger, but only when connected to a PC, XP or vista, doesn't matter.
I've tried flashing different boot loaders, OSes & radios, so far no luck. Currently OS = 3.34.721.2 WWE & Radio i= 1.65.24.36.
Booting & making calls works, connecting via activsync doesn't.
I'd appreciate it if anyone could give me some tips as to what could be the cause of this problem.
Anyone got any ideas as to what I could do?
Hello guys!
I've got a bit of a problem here, because now my mobile refuses to connect with activesync and therefore making it impossible to flash it.
I read the readme in the cid bypass folder, and didn't quite understand it, but as keen as I was on getting a new rom I did it all wrong.
I actually copied the cid bypass folder to my sd-card and ran haret.exe from the phone. A friendly penguin appeared along with some green text, and it rebooted and went black. I waited for a while, but had no patience so I rebooted it again. But after this it has been impossible to connect it with activesync! I've tried hard reset and different computers but nothing works!
I'm hoping someone on this forum can help me!
best regards
Try this.
turn your phone off and press the camera button in then plug it into the USB port
you should get a multi color screen. If you do then you can flash.
But go here http://forum.xda-developers.com/showthread.php?t=330909
Go to where it says EDIT and follow what it says.
Oh and when a dos box opens up and ask you things just press the return key each time.
good luck
hey man, I tried reflashing the original rom to my vox, with the manualstyle sd card flash. So now it's flashed with the original rom, but still activesync doesn't work! anybody have an idea on how to make this right?
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
zipuz said:
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
Click to expand...
Click to collapse
I am confused..is it working or not? one post you say it is but you cant sink..then you say its not.????
and dont use the flash off the mem stick..use windows..
ok, sorry for making confusing posts! I'm just excited about getting it to work.
So here's the situation:
From stock phone used with exchange (turned off the exchange part before doing anything)
1. I ran haret.exe from my phone, and it rebooted into a "black state" after which I rebooted it again
2. I tried to connect it to my computer using activesync, to be able to flash, but it wouldn't connect. Activesync doesn't respond to my phone.
3. I flashed the shipped rom to my phone from my sd-card in good hope that it would reset the whole process, but it still won't connect to activesync.
So here's my problem; I want to flash a cooked rom to my phone, but I'm unable to connect it to my computer via activesync, what to do?
deuse said:
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
Click to expand...
Click to collapse
tried with both ticked and unticked, still nothing
Turn off your phone then keep the camera button pressed in at the same time plug it into the usb port
your should show diff colors on the screen..if so follow what it says in this link.
http://forum.xda-developers.com/showthread.php?t=330909
and do it from the pc not your mobile...
it's restored, but no activesync still
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
ivanek666 said:
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
Click to expand...
Click to collapse
Have you been into settings and un-ticked the box in USB to PC?
Also if you are trying to sync to office you must create a new partnership
google is your best friend.
I have no problems with sync in XP/Vista?windows 7 and office 2007
I am using FMs 1.1 WM 1.1
deuse said:
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
Click to expand...
Click to collapse
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Try this
open sync then at the top chose files then click on DELETE MOBILE DEVICE
see what happens..but post back if you fix it to help other people
yogusmilu said:
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
Click to expand...
Click to collapse
I failed to mention that I've tried the hard reset as well, no luck.
I thought about the same thing Deuse, but there's no mobile device registered, so I'm not able to delete it.
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Looks like your cable is faulty. Try activesync connection through bluetooth (for testing, ofcourse you cant flash from bt ).
parthabhatta said:
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Click to expand...
Click to collapse
It's marked with an "!", will try it on my own pc next time I have it, worked there last time! if not, I'll have to live with
(I posted this in the guide to installing s-off etc etc but yeah I don't know if anyone's going to pay it any mind there :S If I was wrong to create this, I'm sorry ><)
Hi,
I keep getting a Communication interrupted error. I don't know if anyone else had this problem and can help me? I'm a n00b with this s-off thing and I triple checked with like 4 different websites to make sure I'm going the right way with this.
Doing this on Windows, I got the HTC driver, removed anything that would sync the phone to the computer, everything going well up until this point:
Zerging Root... this may take a minute or so..
Sending in Caroline...
Cleaning up...
Rebooting to fastboot...
Whien life gives you lemons, don't make lemonade. Make life take back the lemons
Waiting for fastboot...
Rebooting to fastboot (again)...
Communications with phone unexpectedly interrupted. Try Again.
Press (almost) any key to exit.
What's wrong with it?
also:
I put on the USB Debugging, I turned off Fastboot, and yes, I checked - it is still S-ON *sad*
HTC Sensation 4G (pyramid-1.17.0008, Android: 2.3.3, ROM version: 1.29.531.2)
I have tried with the fastboot on as well
As for these troubleshooting methods, I've been through it over and over:
Revolutionary Hanging on "Method 3"
1. Make sure you have installed all the drivers from above.
2. Please Make Sure you have HTC Sync uninstalled and Droid Explorer uninstalled.
3. Install These Drivers HERE:
4. Basically anything and everything that will allow your phone or other phones to automatically connect or sync to your computer has to be uninstalled
5. Try another Computer or Factory Reset your device as a last resort.
I've tried 3 different computers (I have no access to anyone who has a Linux computer) I've factory resetted my phone twice + my SD card. I really don't know what else to do
I've tried it in Charge Mode, and HTC sync mode as well.
Can anyone help me? :S
you have to do it in charge mode, make sure fast boot is off, and here is the tricky part, ANY app that could sync with the fone, needs to be uninstalled.
for me Zune kept messing with the install cuz it kept trying to sync...
Also, make sure your HBOOT is compatible with the version of revo you are using
so try this:
1) uninstall itunes (and other apple device software), zune, and any htc software (plus the stock drivers)
2) reboot
3) clean the registry (regclean or something similar)
4) reboot
5) reinstall stock drivers then plug in the phone (charge only) and let the pc detect the hardware.
6) unplug the fone and reboot the pc
7) NOW try to S-OFF, should work, this is the process i had to take
Thanks, i tried everything you told me and it still won't work. I'm running out of ideas. Isn't there another method I could go through so I can just flash a custom rom. Lol...
if its unbranded, you can try the HTC method, but im not a fan of their approach to it...revo is much more user friendly in the long run...
also have you tried disconnecting all usb devices other than the keyboard, mouse and phone? also try doing a battery pull and leave it out for 10-15 seconds, and give it another shot
also, what ver of revo u using? the latest? and whats your hboot?
EDIT nm, saw your hboot etc in your first post long night at work
also, this may be a super stab in the dark, try another cable if you have one, just try to eliminate any possible issue
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
DJW6927 said:
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
Click to expand...
Click to collapse
yeah, apparently win7 is giving different users this problem, i used WinXP SP2 32bit with no issues
Yup. Definitely related to Win7 64 bit version for me. Although the user didn't report what version they were using.
It's also worth remembering that all USB ports aren't all the same.
I have to use the ports on the front of this particular 32 bit XP workstation for some operations and the ports on the back for other. Magldr for my HD2 never works on the front.....
Like Rev say in their FAQ... there's something about the USB stack on windows that sucks. Not surprising really when we're talking about interop between such dissimilar operating systems (Android vs MS Win). Its gonna be a headache sometimes.
I'm on Win 7 32 bit, when I tested Revolutionary my device wasn't detected at all.
Rebooted many times, installed drivers and did lots of things and still nothing.
I changed USB port, and it worked xD
Try different USB ports and another USB Cable in-case
Gd luck
Edit: Just found out that you tried 3 different computers... Sorry then, if I come up with anything I'll tell you
Edit 2: Can't he try it on Safe Mode? Maybe it would help?
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Solidus_n313 said:
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Click to expand...
Click to collapse
Wow
Way to go Microsoft xD
I'm having the exact same problem as with the poster of this thread. I've tried a fresh install of xp sp3 via vmware on my macbook pro. I've also installed Ubuntu but can't even get the revolutionary.exe file to open. Linux is too foreign for me, can anyone help me with that?
I had to use HTC sync mode in order for it to work on Windows 7 64 bit.
Sent from my HTC Sensation 4G using Tapatalk
Run it 3 times, each step completes as normal and it'll say it's done
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Sent from my HTC Sensation Z710e using XDA Premium App
lalitsehgal21 said:
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Click to expand...
Click to collapse
listen to this, his situation was WAYYYYY worst than yours, and he got his fone working perfectly and S-OFF'd
By flashing, I assume you do mean using the revolutionary program? I will try this process a little later and will post results. Thank you
i also had this problem when i wanted to set my sensa s-off. i run the tool several times and i always got this error message. So then i plugged of the phone, plugged it on again and then the tool says my phone is already s-off.
i boot the phone into bootloader and yes, the phone was s-off, on top is the revolutionary text and the bootloader version is 1.17.1111