Related
I compiled this a while ago after seeing someone in the Q&A section ask about if it was available for the desire. I only had a few minutes to test that it boots back when I compiled it, and I forgot what works and what doesnt. Therefore this is a complete beta test. Do not use this if you dont know what you are doing. In its current state its for advanced users only. Install using fastboot:
Code:
fastboot flash recovery philztouch.img
If you just want to temporarily test it (without fully installing) you can run this:
Code:
fastboot boot philztouch.img
That'll boot the image and let you play around with the recovery, but once you reboot it will be gone and you will have your old recovery back. (good for testing purposes)
Feedback is appreciated. Thanks
Credits for the development of this recovery go to Phil3759. For more info read here.
Once some testers confirm that it works decently, I will make the OP look pretty and more n00b friendly.
Seems no SD card tools??
How likely will this brick?
smsmasters said:
How likely will this brick?
Click to expand...
Click to collapse
Its almost impossible that this will brick your phone (unless you are flashing it on a phone other than the desire)
If you just want to test without permanently installing, use the fastboot boot command described in the OP.
enix2k said:
Seems no SD card tools??
Click to expand...
Click to collapse
Yes, you seem to be correct. I cant find any of that stuff.
Chromium said:
Its almost impossible that this will brick your phone (unless you are flashing it on a phone other than the desire)
If you just want to test without permanently installing, use the fastboot boot command described in the OP.
Click to expand...
Click to collapse
Any chance for a flashable ZIP?
Can't get fastboot to work right now.
smsmasters said:
Any chance for a flashable ZIP?
Can't get fastboot to work right now.
Click to expand...
Click to collapse
Yeah Ill make it tomorrow when I have time, too busy atm,
No problem mate, no rush. I'll test this out for you.
Chromium said:
Yes, you seem to be correct. I cant find any of that stuff.
Click to expand...
Click to collapse
What sdcard tools r u trying to find? U mean mount usb?
smsmasters said:
Any chance for a flashable ZIP?
Can't get fastboot to work right now.
Click to expand...
Click to collapse
Attached below.
jmcclue said:
What sdcard tools r u trying to find? U mean mount usb?
Click to expand...
Click to collapse
No, Im talking about sdcard partitioning stuff. Do you know if thats normally available in this recovery?
Chromium said:
Attached below.
No, Im talking about sdcard partitioning stuff. Do you know if thats normally available in this recovery?
Click to expand...
Click to collapse
On my S4 Mini and LG G Pad 8.3 with Philz Touch Recovery there is an option under "Advanced Menu" to Partition the sdcard with a selectable ext size, etc...
Chromium said:
Attached below.
No, Im talking about sdcard partitioning stuff. Do you know if thats normally available in this recovery?
Click to expand...
Click to collapse
Il check my desire s... They pretty much the same phone.
Edit: yh the desire s doesnt have partitioning tools. But to be honest, phils recovery is based on CWM its just got a [email protected] load of extra features. And we all know not to partition sdcard with cwm so no real loss if u ask me.
jmcclue said:
Il check my desire s... They pretty much the same phone.
Edit: yh the desire s doesnt have partitioning tools. But to be honest, phils recovery is based on CWM its just got a [email protected] load of extra features. And we all know not to partition sdcard with cwm so no real loss if u ask me.
Click to expand...
Click to collapse
Yes, thats true.
So to the people that tested the recovery so far, any issues or feedback?
I flashed ZIP file and the device is stuck in a boot loop
And tried fastboot, ended up in this error:
sending 'recovery' (4996 KB)... OKAY [ 0.801s]
writing 'recovery'... FAILED (remote: image update error)
finished. total time: 0.807s
Fast solution please! No recovery now!!
pc boy said:
I flashed ZIP file and the device is stuck in a boot loop
Click to expand...
Click to collapse
Strange, did anyone else have problems with the zip?
Use fastboot instead to flash the image.
pc boy said:
I flashed ZIP file and the device is stuck in a boot loop
And tried fastboot, ended up in this error:
sending 'recovery' (4996 KB)... OKAY [ 0.801s]
writing 'recovery'... FAILED (remote: image update error)
finished. total time: 0.807s
Fast solution please! No recovery now!!
Click to expand...
Click to collapse
what did u type in the command? that error is because like if u type "fastboot flash boot recovery.img" get what i mean? (did it last night lol )
correct command is
fastboot flash recovery recovery.img
God I know the fsatboot commands!!
Now I can't even flash the 4EXT recovery back!!!
The same error
Help PLZ!!
pc boy said:
God I know the fsatboot commands!!
Now I can't even flash the 4EXT recovery back!!!
The same error
Help PLZ!!
Click to expand...
Click to collapse
Both "fastboot flash recovery recovery.img" and "fastboot boot recovery.img" are not working? They give the same error?
pc boy said:
God I know the fsatboot commands!!
Now I can't even flash the 4EXT recovery back!!!
The same error
Help PLZ!!
Click to expand...
Click to collapse
yh so do i but i made a mistake last night, it happens. post here what ur typing in the command window.
Chromium said:
Both "fastboot flash recovery recovery.img" and "fastboot boot recovery.img" are not working? They give the same error?
Click to expand...
Click to collapse
flashing does not work but I can boot using the second command!
Now what to do?!
jmcclue said:
yh so do i but i made a mistake last night, it happens. post here what ur typing in the command window.
Click to expand...
Click to collapse
Copy paste:
Fastboot flash recovery recovery.img
renamed the file to recovery.img
Hi,
I've posted on this topic on transformerforums website but have not had any success (despite valiant attempts from the guys on the forums).
I am unable to post the link here, please PM me for a link to my original post.
Basically my TF700T got stuck in a bootloop. I have unlocked the bootloader but have not flashed it so it's on stock ROM. I have not been able to flash a recovery ROM and am at a dead end as to what to do.
I am able to get to bootloader and I when I run
Code:
fastboot devices
I get the following output
Code:
015d2a506733f618 fastboot
Which all seems correct. I have access to the tablet when connected to my pc.
When I try to flash the recovery rom, it takes a very short amount of time and on my tablet the device hangs (i.e the RCK icon is no longer flashing). I have checked the blob, it is the correct one and the MD5 hash is correct.
Code:
C:\androidsdk\platform-tools>fastboot -i 0x0B05 flash recovery twrp-2.7.1.1-tf700t.blob
sending 'recovery' (6894 KB)...
OKAY [ 0.868s]
writing 'recovery'...
OKAY [ 0.089s]
finished. total time: 0.958s
I can get back into the bootloader if I restart again but attempting to flash it results in a hang.
I have tried to insert an sd with the stock ROM and boot in RCK mode but this has not worked either.
Has anyone any suggestions as to what to do?
The tablet is 2 years old now so not under warranty.
thanks in advance.
anyone have any suggestions?
I'm going on holidays on Thursday and would really love to get this resolved before I go.
deleted
Shameless bump .... are my only options to return this to the manufacturer?
Anyone any suggestions, do you need more info from me?
What you did looks correct, only the short time for "writing" looks suspicious. Try the fastboot command again, but replace "recovery" with "staging", maybe that works better. At the next reboot you should see a blue progress bar on the boot screen for a few seconds and it should reboot again.
Hi,
Thanks for the reply.
I tried as you suggested and looks like the same results. I'm doing this in windows 7 and have opened the command prompt as Administrator.
Code:
C:\adb>fastboot -i 0x0B05 flash staging twrp-2.7.1.1-tf700t.blob
sending 'staging' (6894 KB)...
OKAY [ 0.869s]
writing 'staging'...
OKAY [ 0.084s]
finished. total time: 0.955s
Is there any way I get get logs from the tablet itself?
I had been thinking was this a permissions thing although I am able to run
Code:
fastboot boot
Code:
fastboot boot-bootloader
and they work correctly. So I do have access but for some reason the partition is not getting flashed correctly.
Does anyone know what the partitions are used for?
I assume the system partition is used for the actual system image but what is the staging partition used for?
knoxor said:
I had been thinking was this a permissions thing although I am able to run
Code:
fastboot boot
Code:
fastboot boot-bootloader
and they work correctly. So I do have access but for some reason the partition is not getting flashed correctly.
Does anyone know what the partitions are used for?
I assume the system partition is used for the actual system image but what is the staging partition used for?
Click to expand...
Click to collapse
When blobs are written to the staging partition, on next boot. the bootloader flashes the contents to the relevant partitions (i.e., kernel, system, bootloader)
knoxor said:
Hi,
Thanks for the reply.
I tried as you suggested and looks like the same results. I'm doing this in windows 7 and have opened the command prompt as Administrator.
Code:
C:\adb>fastboot -i 0x0B05 flash staging twrp-2.7.1.1-tf700t.blob
sending 'staging' (6894 KB)...
OKAY [ 0.869s]
writing 'staging'...
OKAY [ 0.084s]
finished. total time: 0.955s
Is there any way I get get logs from the tablet itself?
Click to expand...
Click to collapse
Hi sbdags,
So it looks like I'm stuck at this point. The above command seems to work but the time for flashing the recovery blob to staging seems very short which probably indicates that this has not happened correctly. After the above command, on next boot when selecting RCK from the bootloader menu the tablet attempts to perform the update but then I get the android error screen (android dude on his back and error message).
Any suggestions as to what I can do next?
thanks
Paul
knoxor said:
Hi sbdags,
So it looks like I'm stuck at this point. The above command seems to work but the time for flashing the recovery blob to staging seems very short which probably indicates that this has not happened correctly. After the above command, on next boot when selecting RCK from the bootloader menu the tablet attempts to perform the update but then I get the android error screen (android dude on his back and error message).
Any suggestions as to what I can do next?
thanks
Paul
Click to expand...
Click to collapse
Well shoot me a PM, Lets see if we can find a solution to your issue ...
Thx Josh
bump again.
Is there anyone there who can help me on this please ?
knoxor said:
Is there anyone there who can help me on this please ?
Click to expand...
Click to collapse
I don't think I can help you, but can you post the build number of your bootloader? I remember someone had a bootloader for the TF300 on his TF700 and was then unable to flash blobs.
_that said:
I don't think I can help you, but can you post the build number of your bootloader? I remember someone had a bootloader for the TF300 on his TF700 and was then unable to flash blobs.
Click to expand...
Click to collapse
Hi, I fairly sure I have the correct bootloader (WW_epad-10.6.1.14.10-20130801 A03).
Just to clarify, this is a stock rom I have on the tab. I have it unlocked but not rooted.
thanks
knoxor said:
Hi, I fairly sure I have the correct bootloader (WW_epad-10.6.1.14.10-20130801 A03).
Just to clarify, this is a stock rom I have on the tab. I have it unlocked but not rooted.
thanks
Click to expand...
Click to collapse
Your bootloader is ok.
Did you PM Josh? What did you guys try?
If he couldn't help you, I doubt I can...
Aside from the suggestions I gave you on the Transformer Forum, I'm stumped...
So again:
Do not use USB 3.0 ports
Uninstall the fastboot drivers and use the one from here: http://forum.xda-developers.com/showthread.php?t=2646279
Check the fastboot.exe version and see if you can find a later one.
That's all I can think of right now....
berndblb said:
Your bootloader is ok.
Did you PM Josh? What did you guys try?
If he couldn't help you, I doubt I can...
Aside from the suggestions I gave you on the Transformer Forum, I'm stumped...
So again:
Do not use USB 3.0 ports
Uninstall the fastboot drivers and use the one from here: http://forum.xda-developers.com/showthread.php?t=2646279
Check the fastboot.exe version and see if you can find a later one.
That's all I can think of right now....
Click to expand...
Click to collapse
Yes I contacted Josh and shared my desktop with him one evening. We didn't resolve it. I've tried the flashing on 3 different computers.
One of them is an old laptop running ubuntu that I know only has USB2 ports on it.
The only thing I can think of is that I lost my original charger/cable but I spent the extra money to get an OEM one again so I hope that is not
the issue.
Could the cable be the issue??
knoxor said:
Yes I contacted Josh and shared my desktop with him one evening. We didn't resolve it. I've tried the flashing on 3 different computers.
One of them is an old laptop running ubuntu that I know only has USB2 ports on it.
The only thing I can think of is that I lost my original charger/cable but I spent the extra money to get an OEM one again so I hope that is not
the issue.
Could the cable be the issue??
Click to expand...
Click to collapse
If you got the charger from anywhere else but Asus - yes, that could be the issue. And the only one left I can think of....
I was stuck in a Clockworkmod Recovery Bootloop after an otherwsie successful install of CM11. Had everything all set up the way I like it, and bam, I tried to power down but could not, it just went to clockwork recovery, screen on. So I searched for solutions and sadly, tried this in the terminal:
"echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0"
Now the phone appears to be hard bricked. :crying: Cannot hold volume up, down, or both in combo with power switch, and, there is no orange led indicator when the power is plugged in. Any help would be deeply appreciated.
Thanks! AB
brockmanah said:
I was stuck in a Clockworkmod Recovery Bootloop after an otherwsie successful install of CM11. Had everything all set up the way I like it, and bam, I tried to power down but could not, it just went to clockwork recovery, screen on. So I searched for solutions and sadly, tried this in the terminal:
"echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0"
Now the phone appears to be hard bricked. :crying: Cannot hold volume up, down, or both in combo with power switch, and, there is no orange led indicator when the power is plugged in. Any help would be deeply appreciated.
Thanks! AB
Click to expand...
Click to collapse
What on earth did you do that for?
When you plug the phone in does device manager indicate anything has been plugged in?
Yes "My HTC" shows up as an Android item
brockmanah said:
Yes "My HTC" shows up as an Android item
Click to expand...
Click to collapse
And it doesn't respond to adb devices or fastboot devices?
dottat said:
And it doesn't respond to adb devices or fastboot devices?
Click to expand...
Click to collapse
No, there's no reply.
brockmanah said:
No, there's no reply.
Click to expand...
Click to collapse
Have access to a Linux machine?
dottat said:
Have access to a Linux machine?
Click to expand...
Click to collapse
'fraid not. I suppose I can look into installing it on a partition if absolutely required.
dottat said:
Have access to a Linux machine?
Click to expand...
Click to collapse
I stand corrected on fastboot devices. It does return the following:
UEUUUEWUUU§UUUU fastboot
brockmanah said:
I stand corrected on fastboot devices. It does return the following:
UEUUUEWUUU§UUUU fastboot
Click to expand...
Click to collapse
What happens if you type
Fastboot reboot-bootloader
?
dottat said:
What happens if you type
Fastboot reboot-bootloader
?
Click to expand...
Click to collapse
It shuts down and I have to hard reset to get it to show up in the device manager. But that does seem to indicate that fastboot is working. Would something like :
fastboot -c "echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0"
with the 1 and zero replaced with the right variables work? (Confessing that I don't know what the right variables are).
brockmanah said:
It shuts down and I have to hard reset to get it to show up in the device manager. But that does seem to indicate that fastboot is working. Would something like :
fastboot -c "echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0"
with the 1 and zero replaced with the right variables work? (Confessing that I don't know what the right variables are).
Click to expand...
Click to collapse
No. What happens if you try to fastboot flash zip nameofruu.zip
dottat said:
No. What happens if you try to fastboot flash zip nameofruu.zip
Click to expand...
Click to collapse
Having trouble finding the filename of my RUU to try it... I presume i need to get the filename of the latest clockwork mod?
brockmanah said:
Having trouble finding the filename of my RUU to try it... I presume i need to get the filename of the latest clockwork mod?
Click to expand...
Click to collapse
No. Download an ruu and put that in your fastboot directory.
dottat said:
No. Download an ruu and put that in your fastboot directory.
Click to expand...
Click to collapse
Seems to fail, says batt level is set wrong:
C:\Users\Adam\AppData\Local\Android\sdk\platform-tools>fastboot flash zip cm-11-
20150101-NIGHTLY-m8.zip
target reported max download size of 1834942464 bytes
sending 'zip' (239956 KB)...
OKAY [ 7.645s]
writing 'zip'...
(bootloader) radio_batt_level: NOT IMPLEMENTED!
FAILED (remote: not allowed)
finished. total time: 7.659s
brockmanah said:
Seems to fail, says batt level is set wrong:
C:\Users\Adam\AppData\Local\Android\sdk\platform-tools>fastboot flash zip cm-11-
20150101-NIGHTLY-m8.zip
target reported max download size of 1834942464 bytes
sending 'zip' (239956 KB)...
OKAY [ 7.645s]
writing 'zip'...
(bootloader) radio_batt_level: NOT IMPLEMENTED!
FAILED (remote: not allowed)
finished. total time: 7.659s
Click to expand...
Click to collapse
You can't flash a Rom like that. Can you install teamviewer quick and pm me the id and passcode. I think you wrecked your board info partition.
dottat said:
You can't flash a Rom like that. Can you install teamviewer quick and pm me the id and passcode. I think you wrecked your board info partition.
Click to expand...
Click to collapse
I'm from Vietnam. And i have the same problem! Can you help me to fix it by Team View! If you can help me, give me a dating.....i really thank you!
Rockernam2 said:
I'm from Vietnam. And i have the same problem! Can you help me to fix it by Team View! If you can help me, give me a dating.....i really thank you!
Click to expand...
Click to collapse
Did you already try flashing the RUU?
dottat said:
Did you already try flashing the RUU?
Click to expand...
Click to collapse
My phone now can't turn-on. When i connected it to PC and flash RUU.zip by ADB, message on ADB: radio_batt_level: Not inplemented.
And when i flash by RUU.exe, it's not see my device, although when connect PC, i see Android usb device (My HTC) in Computer Magagement
Can you help me.
Rockernam2 said:
My phone now can't turn-on. When i connected it to PC and flash RUU.zip by ADB, message on ADB: radio_batt_level: Not inplemented.
And when i flash by RUU.exe, it's not see my device, although when connect PC, i see Android usb device (My HTC) in Computer Magagement
Can you help me.
Click to expand...
Click to collapse
When you run the command
Fastboot devices
Do you get the serial number as a response?
Sent from my XT1575 using Tapatalk
dottat said:
When you run the command
Fastboot devices
Do you get the serial number as a response?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Before flash RUU, I was try to do it, but nothing response !!!
Hi
I tried flash and root my OP6 following a tuto on forums.oneplus.com
And now I'm completely stuck.
When I try to boot normally, I have a black screen with just a blue notification led
when I try to boot via the command : fastboot boot twrp-3.2.3-0-enchilada.img, same thing, black screen.
And on fastboot mode I can't do anything:
I tried to erase my data, but it changed nothing.
help me please.
Etshy said:
Hi
I tried flash and root my OP6 following a tuto on forums.oneplus.com
And now I'm completely stuck.
When I try to boot normally, I have a black screen with just a blue notification led
when I try to boot via the command : fastboot boot twrp-3.2.3-0-enchilada.img, same thing, black screen.
And on fastboot mode I can't do anything:
I tried to erase my data, but it changed nothing.
help me please.
Click to expand...
Click to collapse
wrong twrp used. https://forum.xda-developers.com/on...covery-theme-blacked-twrp-acuicultor-t3847752 is a working twrp. use it. The blank screen with blue light means no os installed.
after flashing twrp, you then need to get magisk https://github.com/topjohnwu/Magisk/releases and flash as well or you will bootloop.
I just have to run the fastboot boot with this image ?
unfortunately, it doesn't work, I just have a blanck black screen again, with just the blue led.
E:\Downloads\twrp-3.2.3-0_enchilada_V2.0.1> fastboot boot twrp-3.2.3-0_enchilada_V2.0.1.img
downloading 'boot.img'...
OKAY [ 0.575s]
booting...
OKAY [ 0.075s]
finished. total time: 0.651s
etshy said:
i just have to run the fastboot boot with this image ?
Unfortunately, it doesn't work, i just have a blanck black screen again, with just the blue led.
E:\downloads\twrp-3.2.3-0_enchilada_v2.0.1> fastboot boot twrp-3.2.3-0_enchilada_v2.0.1.img
downloading 'boot.img'...
Okay [ 0.575s]
booting...
Okay [ 0.075s]
finished. Total time: 0.651s
Click to expand...
Click to collapse
wrong twrp img used.
I used the one you linked (just renamed it, because PowerShell doesn't seem to like the brackets [])
stupid question, is your bootloader unlocked?
when you first boot to fastboot mode, last line is bootloader state.
MrSteelX said:
stupid question, is your bootloader unlocked?
Click to expand...
Click to collapse
Yep, first things I did.
I then boot on TWRP and install some img and zip (I don't have the tuto anymore and don't remember the files name)
and when I reboot to system it started crash (no boot can't boot twrp, only access to fastboot)
Etshy said:
Yep, first things I did.
I then boot on TWRP and install some img and zip (I don't have the tuto anymore and don't remember the files name)
and when I reboot to system it started crash (no boot can't boot twrp, only access to fastboot)
Click to expand...
Click to collapse
what version of the os was on phone before all of this happened.
MrSteelX said:
what version of the os was on phone before all of this happened.
Click to expand...
Click to collapse
the latest available for OP6, I kept my phone up to date before wanting to root few days ago.
I don't remember well now.
I tried to erase userdata sith fastboot userdata btw, I don't know if it can change something about your question.
ps : sorry for slow answer, Google Recaptcha really hate me ...
Etshy said:
the latest available for OP6, I kept my phone up to date before wanting to root few days ago.
I don't remember well now.
I tried to erase userdata sith fastboot userdata btw, I don't know if it can change something about your question.
ps : sorry for slow answer, Google Recaptcha really hate me ...
Click to expand...
Click to collapse
download this https://androidfilehost.com/?fid=1322778262904011624
this will allow us to fastboot flash stock rom back to phone. Then i can safely guide you to proper twrp and root.
MrSteelX said:
download this https://androidfilehost.com/?fid=1322778262904011624
this will allow us to fastboot flash stock rom back to phone. Then i can safely guide you to proper twrp and root.
Click to expand...
Click to collapse
What do I need to launch from that ?
Which .bat ?
Etshy said:
What do I need to launch from that ?
Which .bat ?
Click to expand...
Click to collapse
fastboot.bat
MrSteelX said:
fastboot.bat
Click to expand...
Click to collapse
I launched "flash-all-partitions-fastboot.bat" (the only bat with fastboot in its name) while being on fastboot mode.
It did a lot of thing on a console, but nothing seems chanegd on the phone, do I need to reboot already ?
I did nothing after launching the bat for now.
ReCaptch is really fu***ng me right now, Can you contact me via pm or email ? a communication without the captcha ...
Etshy said:
I launched "flash-all-partitions-fastboot.bat" (the only bat with fastboot in its name) while being on fastboot mode.
It did a lot of thing on a console, but nothing seems chanegd on the phone, do I need to reboot already ?
I did nothing after launching the bat for now.
ReCaptch is really fu***ng me right now, Can you contact me via pm or email ? a communication without the captcha ...
Click to expand...
Click to collapse
a reboot should just boot now.
MrSteelX said:
a reboot should just boot now.
Click to expand...
Click to collapse
While reading this, your profile picture is spot on. My thoughts exactly
I'm stuck in the same situation ! HELP
Hey, I saw your problem and now while I was trying to flash the twrp I got stuck onto the same situation and what is worse is I've no recovery and I'm stuck on the blue notification light black screen.
What should I do now? I'm currently downloading the file posted earlier here as I write this but I have a MacBook will it work on this also?
I have an unlocked boot loader if it helps.
I also was on 8.1.0 before all of this but I'm pretty sure I don't have any OS as of now.
Thank you.
mukul.legha25 said:
Hey, I saw your problem and now while I was trying to flash the twrp I got stuck onto the same situation and what is worse is I've no recovery and I'm stuck on the blue notification light black screen.
What should I do now? I'm currently downloading the file posted earlier here as I write this but I have a MacBook will it work on this also?
I have an unlocked boot loader if it helps.
Thank you.
Click to expand...
Click to collapse
I was unable to access fast boot until then but now I did and also ran the bat file from the zip and the process took around 10mins but still no luck getting back into it Help!
mukul.legha25 said:
I was unable to access fast boot until then but now I did and also ran the bat file from the zip and the process took around 10mins but still no luck getting back into it Help!
Click to expand...
Click to collapse
did you find a fix already. i exactly got the same problem!
If it too much of a problem to solve just flash back everything with this: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Update to the newest rom, for TWRP just use bluspark twrp: https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965
Pretty sure there are guide on this forum for you guys to search and read before doing anything.
Good luck. :fingers-crossed:
anhanh1453 said:
If it too much of a problem to solve just flash back everything with this: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Update to the newest rom, for TWRP just use bluspark twrp: https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965
Pretty sure there are guide on this forum for you guys to search and read before doing anything.
Good luck. :fingers-crossed:
Click to expand...
Click to collapse
yeah im already on my work to do this but i need a windows installation because this tool only runs on windows and i use arch linux :c
Im on 11.02
if i boot a twrp via fastboot my phone hangs on fastboot and if i flash a patched bootfile the booting process does not end. It hangs on the bootanimation, though i can login te phone with adb shell and even get root. Im looking for a twrp that boots up in fastboot i guess. Anyone outhere that recognizes this and knows how to deal with this?
Zobat said:
Im on 11.02
if i boot a twrp via fastboot my phone hangs on fastboot and if i flash a patched bootfile the booting process does not end. It hangs on the bootanimation, though i can login te phone with adb shell and even get root. Im looking for a twrp that boots up in fastboot i guess. Anyone outhere that recognizes this and knows how to deal with this?
Click to expand...
Click to collapse
Hello, you should mention what TWRP exactly you're trying to boot
strongst said:
Hello, you should mention what TWRP exactly you're trying to boot
Click to expand...
Click to collapse
I'm away from my computer now but i tried 2
The latest 3.5 or something like that and 3.3 something
Is there a version recommended version?
Zobat said:
I'm away from my computer now but i tried 2
The latest 3.5 or something like that and 3.3 something
Is there a version recommended version?
Click to expand...
Click to collapse
I'm only aware of 3.4-10, maybe you have another one, please check the guide and the links to TWRP images which you have to boot: https://forum.xda-developers.com/t/...tloader-twrp-root-with-magisk-update.3954559/
strongst said:
I'm only aware of 3.4-10, maybe you have another one, please check the guide and the links to TWRP images which you have to boot: https://forum.xda-developers.com/t/...tloader-twrp-root-with-magisk-update.3954559/
Click to expand...
Click to collapse
Unfortunately the same result. If i boot this via fastboot my phone hangs on fastboot.
Zobat said:
Unfortunately the same result. If i boot this via fastboot my phone hangs on fastboot.
Click to expand...
Click to collapse
Which TWRP did you used in the past or is this the first time you want to install TWRP permanently?
strongst said:
Which TWRP did you used in the past or is this the first time you want to install TWRP permanently?
Click to expand...
Click to collapse
I upgraded to android 11. I lost twrp somewhere in the process. I miss the option to directly patch the running kernel/bootimage in magisk-manager. Maybe i should look for an older version of MagiskManager.
Zobat said:
I upgraded to android 11. I lost twrp somewhere in the process. I miss the option to directly patch the running kernel/bootimage in magisk-manager. Maybe i should look for an older version of MagiskManager.
Click to expand...
Click to collapse
Can you post the console output of your PC which shows the steps to boot the TWRP?
Which magisk version do you have in place?
Are you asked to enter a pin from the lockscreen security?
strongst said:
Can you post the console output of your PC which shows the steps to boot the TWRP?
Which magisk version do you have in place?
Are you asked to enter a pin from the lockscreen security?
Click to expand...
Click to collapse
downloading 'boot.img'...
OKAY [ 1.214s]
booting...
OKAY [ 0.123s]
finished. total time: 1.337s
Then it hangs in fastboot. I just removed the pinlock and flashed my magisk patched image again. I can login via adb and get root, but the setup does not finish.
I flash my unpatched boot.img again and all is well. No root off course.
Im using the latest magisk app: 22.1
Zobat said:
downloading 'boot.img'...
OKAY [ 1.214s]
booting...
OKAY [ 0.123s]
finished. total time: 1.337s
Then it hangs in fastboot. I just removed the pinlock and flashed my magisk patched image again. I can login via adb and get root, but the setup does not finish.
I flash my unpatched boot.img again and all is well. No root off course.
Im using the latest magisk app: 22.1
Click to expand...
Click to collapse
You used the command
Code:
fastboot boot twrp-3.4.0-10--guacamole-unified-Q-mauronofrio.img
?
strongst said:
You used the command
Code:
fastboot boot twrp-3.4.0-10--guacamole-unified-Q-mauronofrio.img
?
Click to expand...
Click to collapse
Code:
~/android$ fastboot boot twrp-3.4.0-10-guacamole-unified-Q-mauronofrio.img
downloading 'boot.img'...
OKAY [ 1.151s]
booting...
OKAY [ 0.123s]
finished. total time: 1.274s
I'm thinking about moving this discussion to: https://forum.xda-developers.com/t/...l-twrp-for-oneplus-7-7-pro-5g-stable.3932943/
Hey can someone share the Cons of root, because this is very first time when I will install Custom ROOM on my mobile phone, or another thing I wanna ask, is it compulsory to install custom ROOM after rooting my device, I just need root permission for some sort of APPS that needs root access. jbbattery spain
imranhashmi76 said:
Hey can someone share the Cons of root, because this is very first time when I will install Custom ROOM on my mobile phone, or another thing I wanna ask, is it compulsory to install custom ROOM after rooting my device, I just need root permission for some sort of APPS that needs root access.
Click to expand...
Click to collapse
Hey brp about the cons i don't have much idea but the second question, If you don't wanna install custom root then no problem you can still with your original Software, there is no any condition to install custom rom with root file.