Hi.
I damage MDAc with testing of flashing Now only what I can is start MDAc to BootLoader (version 0.2), nothing else. All updates, what I testing are "Country ID error" and dont help me changing operator too. I have other device, but it is I-Mate JAM. From JAM (BootLoader version 1.0) I download ROM to SD card (via USB terminal), but when I insert card in MDAc, only, what I seee is "Not allow update!". When insetr SD to JAM, all is OK and flashing is allowed. I dont have SD card reader. What can I do?
Thank!
V okamžiku kdy spustíš nový upgrade, a napíše ti to "country ID error", hned zmen operatora u toho updatu na jiny, cihlu ponechej připojenou, a upgrade spusť znovu. Opakuj dokud nevystřídáš všechny čtyři operátory. Vůbec mezitím neodpojuj cihlu od PC. Pokud se to nerozjede ani s jednim operátorem, zkus hned jiný upgrade, a postupuj stejně.. Takhle jsem kdysi probudil jednu totálně mrtvou MDA II.. I´m busy, so I don´t have a time write it in english.. SORRY
And which four Country ID codes you mean? :wink:
T-mobile, CDL, Qtek, O2. Test upgrade with this all operator, and let the Compact connected to PC during this testing..
And ID's ?
I don´t know it.. But I think, every operator has his own upgrade, so find them and test them.. Someone must work!!!
"Country ID error" is diferent between this upgrade..
I dont know why, but now my MDAc can boot to system (but without GSM). I run GetDeviceData.exe and this is DeviceData.txt. As you can see, some informations are missing. I test start upgrading on JAM and after verify I connect MDAc, but this dont work too.
Give me your phone number. I want to speak with you.. It will be quicker.
I'am not on phone now, go to ICQ :lol:
Where can I find Divice ID in update files? Now I have Error 100 message
Where are you come from?
Czech Republic. Why?
I still need help
Try this:
http://forum.xda-developers.com/viewtopic.php?t=14553
It allowed me to flash an english Rom (and later an Italian one) over a German device. I suppose that if you find right international codes of your rom you can flash the new one.
Good luck! :wink:
thanks, but this dont work too, still wrong country ID
clever as i am, i´ve upgraded my s100 with the latest rom from qtek, without reading everything. (and doing a bacup of old rom)
it says that if you got a telia locked phone you shouldent upgrade the rom.
becuse the telia locked phones have some settings needed for telia gprs/mms.
Well the gprs didn´t work befor upgrade and it dosent work now.
anyone have any clue to get 1.11.133 WWE rom to work with telia gprs ?
or does anyone have a telia original rom ?
TIA
Frans
Tried the gprs-file on www.qtek.se (the site is down for maintenance right now)?
Lately I tried to upgrade my orange spv m500 to the newest rom upgrade available; One was made available by orange on the dutch site www.pocketpcclub.nl.
As I was installing the file the setup proces stopped while trying to upgrade the extended rom.
I tried and tried again, but to no afail. In my dispair i tried to upgrade with a spanish q-tek 1.11 rom. I ofcourse got the country code error and the wrong device id error......
I brought my spv m500 back to the shop; but the technicians couldnt replace the original extended rom.
So now im left with a spv without extended ROM.....
My device settings now are
Radio version: 1.12.00
Protocol version: 1337.42
Rom version: 1.12.00 WWE
ExtroM version: (empty field)
I still cant upgrade to the latest Extrom version............
Can anyone help me? Is it still possible to put back a working Ext rom?
Is it a UK M500?
Did you back the original rom up before upgrading?
Have you looked on the ftp site for the original m500 rom?
original Orange dutch Extended ROm version needed?
It's a NL rom(dutch) but I believe it has pretty much the same settings as the UK Version(few exceptions for GPRS settings I believe)
I havent found a original SPV M500 rom that comes with dutch settings.....So I would be very thankfull if somebody could upload such a version to the xda-ftp site.......
Hello,
In the upload directory is the new rom for the SPV M500 Dutch. It is the real Dutch version. After you flash your Magician it has all the settings voor Orange NL even the location is already pre selected.
It's a modified rom for the Imate- Jam, modified by Orange.
If you use the Maupgrade_NoID.exe it will falsh every magician I guess.
It works on my MDA Comapact (PM10A).
And in case that doesn't work, I have the Extended_ROM directory (Dutch) on my pc, so if you want I can send it to you.
(Though I don't think I'll be checking this forum too often, so send an email to draexin AT gmail DOT com)
Good luck ^_^
Hello! i have a vodafone v1240 (qtek 8310) and i tried to update its rom and got stuck at 73% for hours. finally i unplugged it from pc and when i reset the phone it shows me just a white screen and i can't shut it down i must take the battery off. it doesnt want to connect with the pc again, in activesync wont recognise it. can u help me pls to get my phone back to life?
i suppose you have new a paper weight now .
cant guarantee but some people have recoverd the phone from this state.
what rom did u try to flash?
Ill suggest you try getting in to the bootloader (Plug the usb ,press and hold volume down and the press the camera button). If you see a 3 color band. Then way to go. Just flash the latest vodaphone V1240 rom
it doesnt want to work that way, it's not responding to this key combination. i tried to update with the latest update rom from vodafone vf-uk_v1240_aku2_v254832_ship.exe and got stuck. someone told me because it was slipped off and can be some hardware failure(i just got it repaired, the display was broken and had to be replaced) but it was working just fine after that, the win mobile 2003 second edition was good just that I want to update to the latest version from vodafone.do you have some other method of ressurection ??
I just read somewhere that from this state cannot be recovered (white screen of death) and my bootloader is crashed.
do you have knowledge if I can repair it by replacing the rom memory phone with a new one ?? (of course, at an authorised qtek service)
is your phone still under warranty??
may i know where do you stay/which country???
allow me sometime to check what part of the rom is flashed first.
That's because as you said your flash was stuck @ 73%.
if the bootloader is flashed first then it might be recoverable(can't guarantee though!), if its flashed at the end then you might want to get it repaired from a authorised repair center , trust me it will be costly as buying a new phone!
my phone has no warranty. i'm from romania but the phone was bought in italy. so can u tell me if the bootloader is still good? and how can i get in?
it was working just fine after that, the win mobile 2003 second edition was good just that I want to update to the latest version from vodafone.do you have some other method of ressurection ??
Click to expand...
Click to collapse
Are you sure its a Tornado, i did not know that any Tornado shipped with WM2003SE.
yeah maybe he had loaded the inappropriate rom.
it's a vodafone v1240 (qtek 8310) ...the update was an official rom from vodafone exactly for this model. yes it had win mobile smartphone 2003 se
I sent the phone to a very good service and it cannot be re-softed. I think the rom memory on the phone's board must be replaced.
so... I'm looking for somebody who has a damaged QTEK 8310 (VODAFONE V1240) or a rom memory chip for this model
I will pay for it because I want to repair my phone!
Hi guy, it's nothing to do with the rom memory. The phone you got is not a real Tornado, but you tried to update it by loading a Tornado ROM, it's a dangerous action, it may damage the IPL and SPL!
yeah i insist. maybe he's just confused or what. his device is not a Tornado. it runs on wm2003se os.
ok let's get all clear here. it's a vodafone v1240 (search on google to find out more) and it is similar to qtek 8310. I tried to update with an official rom for V1240 its not an innapropiate rom or a modified one. Still looking for someone who has a broken VODAFONE V1240
It's very clear, you loaded an inappropriate rom, because your phone is not a real Vodafone v1240. A real Vodafone v1240 shipped with Windows Mobile 5.0, TI OMAP 850 CPU and Wi-Fi block, but your phone shipped with Windows Mobile 2003 SE, TI OMAP 750 CPU and without Wi-Fi. I give you some more information about Vodafone v1240, it's made by HTC, which is a mobile device ODM. The same device sold in defferent areas got defferent names.
Vodafone v1240 = Qtek 8310 = imate sp5 = Dopod 577W
As I know, Dopod 577W got a brother Dopod 577, which have the same specifications as your phone got. Dopod 577 or your phone can not load official rom for Dopod 577W or Vodafone v1240, because they got defferent board and CPU.
i think it falls in cases like in t-mobile sda(wm5 usa version). they also have t-mobile sda II(wm5 europe version) and t-mobile sda II(wm2003se usa version). they almost have the same appearance and form factor but different os. so if your unsure of what kind of device you have, check its system info carefully. but in your case i think you got the inappropriate ROM. unless you show us bits of system info of your device.
cheers
u know u got me all confused. so bluehanson u're trying to tell me that i have a Dopod 577 with Vodafone label on it, who looks just like V1240?
the model is this:
http://pdadb.net/index.php?m=specs&id=471
but it had on it Win Mobile 2003 SE cause I checked before the crash occured.
the rom i was trying to update is vf-uk_v1240_aku2_v254832_ship.exe
based on your link, it is indeed a wm5 tornado smartphone. the rom you loaded is not intended for your device.
Maybe when the screen was "repaired" (as described in an earlier post), the shop just put in the guts for a 2003se edition phone? Perhaps worth checking with them?
ericjm said:
based on your link, it is indeed a wm5 tornado smartphone. the rom you loaded is not intended for your device.
Click to expand...
Click to collapse
ericjm so what's the real V1240 model designed for this rom? cause now i'm totally confused
i dont know what led you to believe it had 2003se,but all tornados are loaded with wm5... and i believe that its not the issue... i think sometime while flashing your rom your phone lost connection with your pc hence your phones curent state... cause you said it stopped at 72% or sumthing... when flashing even with the wrong rom it will go to 100% then not restart... stopping before it got all the way to 100% accidentally or intentionally could lead to a bricked phone... just my 2 cents...
Hello,
after i read a lot here i m not sure ift its possible at the end.I solved my Problem with the bootloader stuck.thx again.I need to send my device to O2 for garuantee repair.Therfore i wanted to install the latest O2 Rom on my G4.
I cant install it cuz it tells only update-> so 3 ways
1.downgrade ipl/spl doesnt seems to work
also dangerous
2 i only flashed the os with a tool without spl/ipl but loading pic still qtek and no o2 extended rom installed...
3unlocking the cid for G4 doesnt work 2 with lokiwiz3.a
HAve you guys any idea how i can restore my garuantee?i need to make my G4 looking untouched...
o2
Hy i have the same problem i tried more romupdates, and i can't update again main old O2 XDA NEO rom, if you know any abaut please send me an email [email protected]
may be someone could pass you the o2 splash screen here