I have a lg Fathom that is stuck on the loading screen. I was messing with the nv items file with cdma workshop and I wrote back the nv item file from the wrong phone and now it won't boot.
Is there anyway to get it to show up as a com port in this state? If I can get it to show up in cdma workshop I have a backup of the right nv item and can write that back.
Thanks for any help.
Not sure if its any help, i had the same problem, though on my Galaxy S, i accentually flashed the wrong phone / pitt combination, i had to put it back into download mode and re-flash the phone, any option for you to enter "download mode" ?
That might actually work, but I can't get the phone to turn on now with the power button, If I plug it into the charger it stays on the lg screen, and when I unplug it it stays on that screen. I read up on the down loader mode and it supposedly skips the lg screen so it might work if I could get the phone to start up.
edit: The battery is dead and won't charge, but I have another lg phone that has the same battery so I put that in and it now starts, but I can't get into download mode.
I've tried this:
1. Make sure your phone is off.
2. Hold down the Green (Call) + C (Delete) + Red (End Call) + Image Stabiliser (Lock) buttons ( the power button on my phone is the lock button, no image stabilizer as far as i can tell)
3. Your phone should turn on and go straight to a screen saying 'Emergency Download' without first showing the usual LG Logo.
4. You can now connect your phone using the USB cable and use Flashing tools to fix your phone.
and this:
volume+-(+) camera + power
Has anyone figured out how to get into the bootloader/download screen for the Fathom. I'm trying to flash V5 back on the phone and I can't get to the download screen. Help!
Related
Rooted my phone, installed cwm and modded 3e recovery, everything seemd to work sofar, clickd to restet into boot mode? i think that was the next step and now im staring at the samsung screen for i cant tell you howlong. Usb dosnt recognize device cant reset it into boot by holding power and volume. Any ideas? sorry if this was covored somewhere but I searchd in the forum and im not reading countless threads in the infused post to see if they had maybe been covored, iv been poking around for an hour now im asking for help.
Start by pulling the battery and follow the instructions found here.
EDIT: If you need any help, I will be around all night.
Don't need to pull battery, I've been able to enter ODIN mode as follows:
Hold down VolUp+VolDn
Hold down power button for a while (10-15 sec)
Phone should reboot, release power button, keep holding VolUp+VolDn
You should be in downloader mode now.
Also some of the instructions for entering downloader mode were a bit funky, they said something like:
Pull battery
Insert USB cable
Hold VolUp+VolDn and then insert battery
In my case the following works:
Insert battery, do NOT touch Power
Hold VolUp+VolDn
While still holding them, insert the USB cable
You should wind up in downloader mode
Pretty much as long as you're able to enter downloader mode you're not bricked. I've been frozen at the SAMSUNG screen MANY times (kernel hackers get used to it...)
Well, I believe I bricked my phone.
When I was following the instructions to flash my phone, LGDP2 was running, and then it hit the end of installation, and threw an ErrNum4008 - RAM PROGRAM. So I didn't know what to do, so I unplugged it. Mistake I'm sure.
So now my phone does nothing. Just a black screen, and when plugged in, the keys light up, and the LED display is lit, but nothing on the screen.
I'm unable to get it into Download Mode either (Volume Down + Camera + Power)
Any chance anyone has a fix of some kind.
Thanks!
SOLVED: I ended up just pulling the battery out, plugging it into the computer and trying to put it into download mode that way, and it worked.
Hello, I need help my LG Optimus, G2 AT &T cell phone over night log off from my home screen to a black screen with the LG logo and I when I press the power button it shows a little code in the upper left hand corner of my screen showing Source: Booting Error! Cause boot certification verfy, and it goes to a black screen until I plug it to the charger, and I tried pressing the volume down key while pressing the power button while on the charger now it's locked on a down load screen staying to do not unplug what do I need to do next?
Gmonster47 said:
Hello, I need help my LG Optimus, G2 AT &T cell phone over night log off from my home screen to a black screen with the LG logo and I when I press the power button it shows a little code in the upper left hand corner of my screen showing Source: Booting Error! Cause boot certification verfy, and it goes to a black screen until I plug it to the charger, and I tried pressing the volume down key while pressing the power button while on the charger now it's locked on a down load screen staying to do not unplug what do I need to do next?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2077479
Look over here in your Phones official thread. There is a return to Stock thread that you need to read. but those guys can help you out more, its all listed. The thread i linked will allow you to download the offfical files for reflashing to stock.
Thank you !!!
I want to say thank you so very much for the INFO. I have an AT&T LG E980 cell, I left my cell plugged in on the charger because the Download said not to unplug until the download is completed, It was plugged up past 12hrs, so I unplugged it fear of overcharging, After a couple of hours, I began pressing the Volume down+Home+power buttons simultaneously and the Factory Rest Page appear, but when I press the power button to confirm the action this Code popped up:
18370
18370 Source :Boot Error! Cause boot certification verify
18370
18370
Below it every time I repeat the steps. It want power up without being plugged -up. OMG!!! What Next?:crying:
I have a Lg G Pro 2. Few days back it got bricked by its own( a crazy fact). That time it was showing QHSUSB_BULK. I figured it out as 9006. Took the phone to a local service shop. Today I got it back and found that nothing had happened to the phone, except worse. Now it is not detected by PC, only green light blinks for some time if tried to power on. And then everything is black and cold as death.
I think it have been flashed with wrong ROM. Anybody here can guide me with the test points of Lg G Pro 2 (D838 F350) ? So that I can force it to QHSUSB_BULK ? Or any step by step advice to get it up ?
I am in real need of assistance, and thanks in advance for any sort of help. Best Regards.
I would like to mention that the phone indicator blinks for sometime if I try to power it on, as it does on boot, but nothing else is there. No recognition by PC, no presence in Device Manager. Blinks for sometime, stops, again starts blinking... and this goes on at regular short intervals. The area around the camera gets warm after sometime. Everything loops till I pull off battery.
Now, am I missing something ? Is the problem not as deadly as I am thinking ? Is it soft bricked ?
Hi, I not sure how it got bricked I never brick LG device.
Normally if anything happen we try pull battery out and put it back in, try then to turn the phone on.
Have you try connect to to pc with USB cable, one end of USB connnect to pc and other end connect to the phone. Then try press Power + Volume Up or Power + Volume down, this is to try to get into phone download mode. If you can get into download mode you can flash the kdz file to make it useable again.
Or without the USB cable we want to get to factory reset mode by use hardware method try press:
- Power + Volume Up or Power + Volume down
- If you see LG logo come up release the buttons you press above 1-2 second
- Press again Power + Volume Up or Power + Volume down
- Until it show and ask to use volume up/down button to select choice, say yes
Caution factory reset will delete all data on the phone and reset it as when you bought it new.
- Again it will ask for factory reset, use Volume up/down to choose and select yes for factory reset
turn on the phone and when light is blink press volume up or down button for some time and see if it it is detected as usbhulq?
D2206. Got into a bootloop (the phone only shows the Sony and Xperia logo but ain't starting the system and just restarting forever doing it again and again). Can't get into Fastboot mode because volume buttons and power button isn't reacting at all. The only solution to force it to show some traces of life is plug him to PC or to a charging device but nothing happens except the charging lightning animation appears. And after connecting to PC, it seems like Flashtool recognize him, but nothing can be done because of the periodic 5-7 second interval disconnects.
Any solutions or tips?
You need to power off before connecting. Here's how.
I don't know if you figured this out or still need the help now, but I'm answering because it's the one thing here that I do know the answer to.
From your description, it sounds like you are trying to connect your phone to PC while the phone is still in boot loop. This will not work. You need to power it off first. Since your power and volume buttons won't respond during boot loop, you will need to use the hardware override that is provided.
Under the back panel of your phone, between the SIM2 and microSD slots, you will see a small punch-hole about 2 mm in diameter and labelled "OFF." Use a pen or precision screwdriver to gently press the off switch located inside this punch-hole for about 1 sec. Phone should switch off.
Wait about 15 sec before connecting to PC in Flash (Vol Up pressed down) or Fastboot (Vol Down pressed down) mode until the LED flashes the respective colour and then you can follow whatever instructions you are following.