Im running mod. 1.2 by DFT...Everything is running fine..My problem is that live isn't working .Im aware that I need to call M.S after a few steps...Ive downloaded the WP7 unlock tools and have read the tutorial mny times...The problem is after i've installed the certificate, & unlocked the phone & run the tom instaler. when I get to connection setup.xap, I get this message box: windows cannot open this file. windows needs o know wat program you want to use to open it. windows can go online to look it up automaticaly or you can look it up manually. what am i doing wrong here.. what step am i mssing..any help woul be appreciated
zune is up and running and connecte just fyi
are you talking about live messenger?
Related
Please dont get mad i looked every where to see if this had already been posted. When i run Hard-SPL I keep geting to 260 error it starts just fine asks me if i will grant access to the application which i do and it starts to do its thing but then halts and i get the 260 error and it dose not go any farther any suggestions?
did you remove your sim and sd card?
In addition, if you have not removed them back up your data. Then do a hard reset. Then remove sim and sd card. It maybe an open port problem so restart your computer as well. Hope this helps.
tried
Gave that a try after it asks if it is alright to load the file on my phone it auto resets phone then 260 error happening again im on vista 64 bit and even tried what the main website said for vista users but half the guide dose not really apply so im not sure what to do or what im doing wrong. any more suggestions?
Need Help
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
sorry i couldn't help you i always thought a 260 error was due to open connections or ports.
When you downloaded the zip file for hardspl did you use vista's unzip?
If so you may get an error because vistas unzip program sucks ass and you need to use another application to unzip the hardspl software.
crazigamer said:
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
Click to expand...
Click to collapse
Did you go through the connection settings in the mobile device manager and disable usb connections?
Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
This advice is thanks to tochill. Try this and see if it works. Vista often does not automatically load the drivers. I used Vista 64 to flash without a problem. It was a little tricky to get it to load the drivers at first but after they are loaded you should be fine. If it doesn't work let me know and I will see if I can find the drivers for it.
Also make sure you have the most updated version of Windows mobile device center.
not sure what to do
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
update ur drivers if ur using vista
for me vista was a pain to flash so i just use my desktop which is xp and its happy flashing for me all the way...piece of cake now after u do it a few times
crazigamer said:
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
Click to expand...
Click to collapse
Before you connect your phone.
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Even tried xp
I have even tried using XP I still get the same outcome my phone auto restarts after I tell it to run the program. What am I doing wrong? I am suppose to run the main file off of my PC not the phone correct? and just go trough the setup?
Can some one tell me how they did it step by step because I have followed the instructions on the HARDSPL main thread and it dose not work. And so I am correct this will work with the new ATT Tilt right?
tried all of that still dose not work any other vista run arounds? God i wish i still had my xp discs
Please feel free to message me on aim username is kl3pto really could use some help.
GSLEON3 said:
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Click to expand...
Click to collapse
Thanks that was a thread I was looking for to post to the OP as the next step. I have had to reinstall vista 5 times and each 5 times had to do something different to get it to work.
NP, I also suggest with Vista, you flash HardSPL via Jump. Don't flash ROM's or Radios with JumpSPL, but with the 1.93 SPL, I have tons more success using the Flash HardSPL method than the .exe
Hi
Well I am using HTC Tytn with Windows Mobile 6.1. But I want to check out android on it. So before installing android, i want to send all my contact list to my laptop. When I connect my phone to my system through activesync, i get this error : support code 80072efd.
Please help
???
back up online to get all of y;ur contacts back ,"Microsoft My Phone " works great . I'Ve gotten the same error message but can't figure it out. Good luck.
Thanks man. Though I could not load Abdroid, I installed windows 6.5. And microsoft-my phone app is really neat.
Hey all, I could use a little help I'm new to this stuff. I installed the Android SDK all correctly with the correct Java JDK and for some reason when I create a virtual android and run it I get "Error Loading Preferences", is there any way I can fix this to get it to work? I am running Win 7 Ultimate 64-Bit (if you needed to know), thank you for your time and help in advanced.
Yeah, I'd like to know the answer to this also
R u trying to root your phone for the first time or something and what phone is it
ohh no, im not rooting it yet (still have to receive my phone in the mail), but in the virtual server when i create a virtual android I receive that error
Ohh alright then it may just be your computer just wait for the phone to come in
okay, thank you!
hey im kinda newbie here so
when i try to open wave remaker any edition it says (failed to start application due to configuration is not correct. reinstall may solve the problem)
i reinstall more than 10 times and same error message show again?????????
any help please i need it so bad
Please help its urgent
Hey people pls reply
Googled it but nothing is workin T_T
Hmmmmmmmm
Do you have Microsoft .Net installed ???
Please install it and try again
Best Regards
thanx for ur reply im downloading it right now
still not workin
Do i have to install microsoft visual studio???
its too big 200mb and not for free
Maybe helpfull if we know Windows Version...
I hope not you play with Windows 8 "alpha"...
Best Regards
Waveremaker needs msvcm90.dll and msvcr90.dll.
Try installing the C++ runtime from here ...
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5582
Im running windows xp..and i already installed c++ sp1..but i read that dlls should be in local folder of wave remaker itself and i dont know how to..thanks for ur reply
As long as the files are in the windows\system folder you should be OK.
Which version(s) of dot net did you install? I have an XP machine with frameworks 1, 1.1,2,3 & 3.5 and it works straight off a memory stick.
You can check which frameworks are installed by looking here: C:\WINDOWS\Microsoft.NET\Framework.
i have microsoft.net framwork v2..and .net framework web installer 4
btw..can wave remaker edit the hidden system file inside ffs winimage cant..and tk file explrer can view it but not edit
I Have A LG Revolution And Its Stuck in Test Mode, I Read The Whole Thread About The Program(LG Test Mode Repair), I know This May Not Be The Right Location For This Question But Because Im A New User "I CAN'T POST IN THE LOCATION WHERE I NEED TO". So Anyways Im Running Windows XP and Im Guessing Thats Why, But When I Try To Run The Program It Crashes Before It Even Starts And Gives The Microsoft Error Report. My .NET Framework Is Up to Date, Does Anyone Know Why This Is Or If The Problems Been Fixed Or Can This Only Run On Windows 7???
Thanks For Whatever Help!
Please Dont Redirect Me As I Cant Post In The Proper Location.