hey is it possible to pull the entire Android OS, all assoicated files, etc off of a phone..like a droid or X for instance, and then run that from a virtual machine on your computer??
No, but you could check out the android x86 project or run eclipse.
evilkorn said:
No, but you could check out the android x86 project or run eclipse.
Click to expand...
Click to collapse
i specially wanted to "emulate" a phone on the PC to check stability. i want to TOTALLY strip froyo, down to basic operating system and build it back up with no bloat, no apps, no nothin. customize it yourself, ya digg?
To run on what, phone or computer?
You said you wanted to run it in an emulator on the PC, which is what the android x86 project is for.
If you want to run it on the phone, eclipse is the build environment.
Hello,
I have bought the htc desire s in december'11 and I assess that I hate android and all the available custom roms so I try to get some other distribution to work on my desire s.
IMPORTANT: Please don't tell me something about the sense or how nice a chroot works, I am asking for a native installation guide.
All I want is a clean base-system (ubuntu/debian/gentoo/angstrom/...) that will boot.
Does someone know a way (howto/wiki/manpage ) to get a proper distribution to work on this device?
My Workflow:
-> install distribution
-> get wlan access to work
-> boot device with autoconnect (wlan) and sshd (openssh or dropbear)
-> connect via ssh and get an graphical frontend like X-server to work.
best regards
invalid id
Why did you buy an Android phone when you hate Android?
Anyway, are you planning to use the phone to make calls?
If so, you can't use any standard Linux distributions.
If you do some googling you should be able to find a guide to install Ubuntu and run X on it.
I think there's an official version for dual core phones, but unfortunately that does not affect this phone.
Ubuntu doesn't run native, but through chroot.
There are no native installation guides.
If you can remake any distribution to have 4MB kernel and load everything from another partition - you can try to make a native installation yourself. Look at the mounts in loaded system, look at the kernel code and see how you need to compile one, and make it.
Otherwise - sell the phone and buy something else.
Hi guys !
I wanted to know whether the new Samsung Galaxy Tab 3 10.1 can run Windows 8./LINUX !!
Theoretically it shouldn't be too hard as it has an Intel Atom x86 processor and it shares a lot of it's specs with the Acer Iconia w510 and other tablets running Windows 8
Can you please tell me some of the issues that we may have to deal with ?
Like we will have to do something with the bootloader to make Windows 8 bootable and things like that :/
And please if you want to say something like -Why do you want to run windows on an Android tablet-
XDA is about modding. A new OS will not hurt anyone AFAIK.
What are your ideas ? I think it can be done but what will we need to do ?
Now we will be concentrating on Linux. it Will be easier.
Please use this thread for discussing Linux on the Samsung Galaxy Tab 3 10.1
Thanks for reading !
Nitro_123 said:
Hi guys !
I wanted to know whether the new Samsung Galaxy Tab 3 10.1 can run Windows 8.
Theoretically it shouldn't be too hard as it has an Intel Atom x86 processor and it shares a lot of it's specs with the Acer Iconia w510 and other tablets running Windows 8
Can you please tell me some of the issues that we may have to deal with ?
Like we will have to do something with the bootloader to make Windows 8 bootable and things like that :/
And please if you want to say something like -Why do you want to run windows on an Android tablet-
XDA is about modding. A new OS will not hurt anyone AFAIK.
What are your ideas ? I think it can be done but what will we need to do ?
Thanks for reading !
Click to expand...
Click to collapse
much like apple windows 8 is closed source. Thats pretty much the end of the thread. Without a way to compile, edit the operating system and know what changes your making its just not a undertaking many will accept.
@trevd Do you have anything to say about this ?
@wranglerray I'm just talking about installing windows to a device. AFAIK no compiling/editing will be needed. There are other tablets out there that do the same thing so why not this one ? The only major hurdle I see is making some kind of a custom bootloader that can boot the windows stuff instead of the android stuff. THAT part will probably need to be made from scratch or it may be ported from a similar device.
There are quite a few devices like this that run windows with similar specs so why not this one ?
Nitro_123 said:
@trevd Do you have anything to say about this ?
@wranglerray I'm just talking about installing windows to a device. AFAIK no compiling/editing will be needed. There are other tablets out there that do the same thing so why not this one ? The only major hurdle I see is making some kind of a custom bootloader that can boot the windows stuff instead of the android stuff. THAT part will probably need to be made from scratch or it may be ported from a similar device.
There are quite a few devices like this that run windows with similar specs so why not this one ?
Click to expand...
Click to collapse
well quite honestly your talking about porting windows to a device. Our device comes with android and you want to port windows to it instead. So on our device there are parititons chuncks of data of varying sizes allocated to hold a small part of the code that runs our phone. from ramdisk to the radio. The issue on its surface, we dont know how that partition table lines up with a different device.(which the partition table can and most likely is, completely different) and because winodws 8 is closed source we dont know how it boots, or how to edit the imstaller to ensure the os gets copied over the correct partitions. if porting were as easying as just flashing what ever you want and then changing some things to tweak it i'm sure you'd see hundreds of ports in a day or two. Unforntatley it really kinda sucks
The partitions are the biggest problem. We could in theory also boot from the SD card and as a result bypass all the android stuff and get it dual-booting but first we need to know how we can boot windows
Nitro_123 said:
@trevd Do you have anything to say about this ?
Click to expand...
Click to collapse
Hi There
I've not got a device in my hands yet to be able to give a proper device focused opinion on this.
but since you ask, I will say It really all depends on the bootloader setup on the device and how accessible that is, it could well be a proprietary Samsung Design in which case I wouldn't want to "mess" with it unless you had a JTag handy for when s**t goes wrong, otherwise you'll be holding a very expensive brick.
Even without bootloader access theoretically you could create a 3rd stage bootloader ( possibly Grub2/uboot ) which sits in place of the kernel in the boot image ( or recovery image ) , this would give the Option to load android or chainload into the windows boot manager, this is how things are done on classic x86.
If you have to go with a 3rd Stage Loader then the first steps is to get your own code running instead of the Standard Kernel Initialization inside an android boot image, There's all sorts of fun to be had after that as basically you'd need to place things in memory where the Kernel or the Boot Manager is expecting to find them amongst many other things.
Standard Windows 7/8 Installations setup a "hidden ( not assigned a drive letter in windows) " 100MB NTFS partition which contains the bootmgr.exe ( TRIVIA : boot manager replaced NT LOADER ( NTLDR ) which was used by Windows XP ). The boot configuration datafile ( BCD ) contains the settings for loading the actual operating system.
I wouldn't be too concerned about the closed source nature of Windows as there's still plenty of folks doing some absolutely bonkers **** with Windows/Windows Booting. Check out http://reboot.pro if you want to see some of that. My favourite is the 10MB WindowsXP that boots cmd.exe and nothing else LOL WAT!?! . I'm not saying you'll find the answers there but I'd consider it the "state of the art" when booting windows in unusual ways.
Without getting too far ahead, if you did get it booting then it appears the Asus Memo Pad FHD 10 which is a windows 8 device has the same SOC so I would expect there to be driver support already present ( or available ).
Additionally I've not even considered UEFI and how that would affect the whole scenario as I've not delved into the UEFI chaos yet.
Personally I've not used Windows in anger for a couple of years and I've only booted Windows 8 in VM's just to have a look, so my "WindowsFu" is getting a little rusty.
In Summary : Technically Possible ( anything is possible ) - All depends on the bootloader and how much you want it! and to paraphrase @wranglerray "If it was easy, everyone would be doing it"
Trevd
@trevd @wranglerray Thanks so much for the input
This shouldn't really be too hard to do for an experienced dev IMO but I don't have mcuh experience with all this stuff
The stuff that has been done to the HD2 was a lot harder I think but Cotulla still managed to make a custom bootloader and boot WP7 things like that
Thanks again for the comments
@wranglerray @trevd
http://forum.xda-developers.com/showthread.php?t=2540480
Please read the above link
basically we can now understand what the partitions are and what they do
Is it really that hard to make some kind of a zip file that can be flashed in recovery to boot the windows 8 bootloader ?
Why can't we just install an image of windows 8 to the SD card and boot off it ?
What do I need to know in order to understand and try to make this work ? Since no one is developing for the tab 3 10.1 I thought I'd give it a try
Nitro_123 said:
@wranglerray @trevd
http://forum.xda-developers.com/showthread.php?t=2540480
Please read the above link
basically we can now understand what the partitions are and what they do
Is it really that hard to make some kind of a zip file that can be flashed in recovery to boot the windows 8 bootloader ?
Why can't we just install an image of windows 8 to the SD card and boot off it ?
What do I need to know in order to understand and try to make this work ? Since no one is developing for the tab 3 10.1 I thought I'd give it a try
Click to expand...
Click to collapse
As a newbee I will guess:
Windows can take a bigger effort.
Runing Linux natively, easier. Android drivers should be already Linux Compatible. Tweeking them under Linux I do not know. My best guess is looking how to make grub to run first for dual booting. Or even better, Create a partition on external SD forl Linux, To be safe on TWRP recovery add a bottom to boot Linux or even esier re-use one temporary to test posibility.
Good Luck.
dale_para_bajo said:
As a newbee I will guess:
Windows can take a bigger effort.
Runing Linux natively, easier. Android drivers should be already Linux Compatible. Tweeking them under Linux I do not know. My best guess is looking how to make grub to run first for dual booting. Or even better, Create a partition on external SD forl Linux, To be safe on TWRP recovery add a bottom to boot Linux or even esier re-use one temporary to test posibility.
Good Luck.
Click to expand...
Click to collapse
@dale_para_bajo EXACTLY my friend. You stole the words right out of my mouth
Objective: Get Linux booting. SD card way is better.
Any updates on this?
SharpnShiny said:
Any updates on this?
Click to expand...
Click to collapse
It will never happen, the firmware isn't compatible.
calden74 said:
It will never happen, the firmware isn't compatible.
Click to expand...
Click to collapse
Yeah I've looked a bit more into it since, I think the best chance was Windows RT, and that isn't downloadable I believe, so that's it. Thanks for the reply though.
SharpnShiny said:
Yeah I've looked a bit more into it since, I think the best chance was Windows RT, and that isn't downloadable I believe, so that's it. Thanks for the reply though.
Click to expand...
Click to collapse
Even if Windows RT aka an ARM optimized ISO, was downloadable, it COULD NOT be used on Tab 3 10.1
Because this Tab doesn't have an ARM CPU, it have a x86 (32Bits) CPU. So better get a x86 ISO. I also got the same idea (like many other Tab 3 10.1 users). But the dream is NOT going anywhere. Also, Android apps are honestly BAD OPTIMIZED for this CPU ! That's why the Tab lags.
I sold mine and have bought a Tab 7.7 w/ SuperAmoled HD Screen but I broke its screen and can't now find any replacement in my region
Our best chance would be:
Ability of instally Windows 8 into a single .IMG file like Windows XP has been installed !
However, QEMU and KVM refuses to install Windows 8 into a VM idk why !
The RAM of the Tab is also a bit low to run Windows 8 inside Android.
If only a Great Dev could port or create "The Multi-boot bootloader" for Tab 3 10.1 as done on Nexus 7, then I won't waste my money buying a Windows 8 Tablet again since I would manage to install Windows 8 natively, whatever happened !
Sent from my roomate's computer
Can this work?
trevd said:
Hi There
I've not got a device in my hands yet to be able to give a proper device focused opinion on this.
but since you ask, I will say It really all depends on the bootloader setup on the device and how accessible that is, it could well be a proprietary Samsung Design in which case I wouldn't want to "mess" with it unless you had a JTag handy for when s**t goes wrong, otherwise you'll be holding a very expensive brick.
Even without bootloader access theoretically you could create a 3rd stage bootloader ( possibly Grub2/uboot ) which sits in place of the kernel in the boot image ( or recovery image ) , this would give the Option to load android or chainload into the windows boot manager, this is how things are done on classic x86.
If you have to go with a 3rd Stage Loader then the first steps is to get your own code running instead of the Standard Kernel Initialization inside an android boot image, There's all sorts of fun to be had after that as basically you'd need to place things in memory where the Kernel or the Boot Manager is expecting to find them amongst many other things.
Standard Windows 7/8 Installations setup a "hidden ( not assigned a drive letter in windows) "* 100MB NTFS partition which contains the bootmgr.exe ( TRIVIA : boot manager replaced NT LOADER (* NTLDR ) which was used by Windows XP ). The boot configuration datafile ( BCD )* contains the settings for loading the actual operating system.
I wouldn't be too concerned about the closed source nature of Windows as there's still plenty of folks doing some absolutely bonkers **** with Windows/Windows Booting. Check out httpdouble slash)reboot(dot)pro if you want to see some of that. My favourite is the 10MB WindowsXP that boots cmd.exe and nothing else LOL WAT!?! . I'm not saying you'll find the answers there but I'd consider it the "state of the art" when booting windows in unusual ways.
Without getting too far ahead, if you did get it booting then it appears the Asus Memo Pad FHD 10 which is a windows 8 device has the same SOC so I would expect there to be driver support already present ( or available ).
Additionally I've not even considered UEFI and how that would affect the whole scenario as I've not delved into the UEFI chaos yet.
Personally I've not used Windows in anger for a couple of years and I've only booted Windows 8 in VM's just to have a look, so my "WindowsFu" is getting a little rusty.
In Summary : Technically Possible ( anything is possible ) - All depends on the bootloader and how much you want it! and to paraphrase** @wranglerray "If it was easy, everyone would be doing it"
Trevd
Click to expand...
Click to collapse
I am new to the forum but not windows and android though not advanced but do you think that getting those files in the 100mb partition and making an ext2 image of them with slight modifications to fit in the architecture and flash the image as a recovery image?
or perhaps we could use rom manager and by creating a virtual rom composing of windows and boot them via the rom manager tool.
or perhaps we could use grub or a similar tool to boot into an image file or sdcard with windows installed on it and flash the grub files onto the recovery partition but some one with advanced info please confirm all these possibilities!
________________________________________________________________________________________
Hit thanks if I helped, its not that tough
Go ahead guys !
This thread is becoming IRRELEVANT !
Tab 3 was made to run Android (and possibly Ubuntu since Android is a mobile version of Linux) but NOT Windows !
So just use Android or Nothing.
Sent from my roomate's computer
yes but
Nonta72 said:
Go ahead guys !
This thread is becoming IRRELEVANT !
Tab 3 was made to run Android (and possibly Ubuntu since Android is a mobile version of Linux) but NOT Windows !
So just use Android or Nothing.
Sent from my roomate's computer
Click to expand...
Click to collapse
Yes, but since both Windows and any x86 Linux are designed for the same architecture, shouldn't we be able to boot Windows?
glorified sd card
Dani515 said:
Yes, but since both Windows and any x86 Linux are designed for the same architecture, shouldn't we be able to boot Windows?
Click to expand...
Click to collapse
i think it's possible
check this out starting at angel_666's post #18
http://forum.xda-developers.com/showthread.php?t=2589370&page=2
finding out where the flag checking starts and finishes would probably make the third stage boot
more realizeable. i directly flashed both grub and then plop to recovery block and got nowhere,
so it's mmcblk0boot0 or mmcblk0boot1, i haven't found anything in param===>/dev/block/mmcblk0p16 yet
and if p5210 has the little kernel burnt onto the chip setup, from my understanding of what i've
read it's a really basic/small/simple setup so even if the flag was there and unchangeable we should
still be able to get past it somewhere else, right?
Really ?
Dani515 said:
Yes, but since both Windows and any x86 Linux are designed for the same architecture, shouldn't we be able to boot Windows?
Click to expand...
Click to collapse
I firstly got this idea and have posted here on XDA about it :good:
Look at this thread http://forum.xda-developers.com/showthread.php?t=2682603
However, mine was about running Windows 8 inside Android
Sent from my roomate's computer
Done already?
Hello,
I have found this thread: http://forum.xda-developers.com/showthread.php?t=2070139
If you read further, you can find almost complete solution for archlinux natively on Note 10.1. WIth multiple fixes/scripts. Any reason why it cannot be done on tab3 10.1? I'm asking because I might try to compile proper kernel and prepare some distribution as tablet provides power that ends up completely wasted by android.
Hello,
Hopefully can find further help here...
Obtained Keypoon K30s Pro tablet from China. It is running Android 10 as its oem OS. I want to set it up with a linux distro instead of android.
Ofcourse due to exotic make I have not been able to find any threads of information on this topic for this brand tablets.
Only guide so far has been hardware specs...
It is running on Unisoc SC9863a 64bit ARM Cortex A-55 cpu at 10 cores.
10GB RAM
512GB internal storage
PowerVR Rogue GE8322 integrated graphics card
It successfully connects with windows 10 cmd adb bridge.
As I understand, I would need a linux distro img format file to try and boot it from bootloader via ADB, however official sources only offer ISO downloads.
PS I am open to any linux distro which would offer best compatibility to the hardware. From what I can see Debian seems to be a good choice. (as this brand is not
part of the supported device list for ubports of ubuntu touch couldnt get past that either)
Any advice would be greatly appreciated
Thank you
Try this
Andronix - Linux on Android – Apps on Google Play
Andronix lets you install Linux on Android without root.
play.google.com
jwoegerbauer said:
Try this
Andronix - Linux on Android – Apps on Google Play
Andronix lets you install Linux on Android without root.
play.google.com
Click to expand...
Click to collapse
Thank you for reply.
Looks like Andronix is a Linux emulator and backbone still remains Android.
with this also comes certain limitations...
I was looking to completely replace Android with a Linux distro.
Any suggestions?
Android IS Linux tailored to the mobile's hardware
jwoegerbauer said:
Android IS Linux tailored to the mobile's hardware
Click to expand...
Click to collapse
Yes, you are correct there. Andoid is built off the linux kernel.
However, it is still limited in what you can do, you have proprietary bloatware bogging down your device and the biggest issue for me is that google is the manager of it all.
So I am strongly coming from privacy side as well.
I have seen quite a few options similar to Andronix on play store. Correct me if im wrong- they are like a virtual machine on windows..? Not sure how this setup works, if you are able to save your OS state, packages etc, or its a clean slate everytime you fire up the vnc server and connect to the distro of choice...
So I am really interested to see if its possible to fully get rid of android and try linux. (Cant install windows as ARM cpu's are not supported, not that I wanted windows anyway)
Many thanks