Lol at Kies - Captivate General

So I plugged my captivate into my computer the other day to check for firmware updates. It said I had to do an emergency firmware recovery. So I thought "fine, whatever" my phone was working fine as is but I did it anyways. When I plugged it in I noticed the steps and it was similar to when upgrading my firmware to 2.2 through Kies so I threw my phone into download mode and plugged it in and it started doing its thing.
The part I found funny was in the steps it said to put the phone into recovery mode actually instead of download mode. Which is making me think is what they ment for me to do since its what worked when I first upgraded and its what ended up working in the end.
P.S What would cause my phone to need to do a emergency firmware recovery? Would it be that I was just flashing firmwares a lot recently?

Related

kies update bricked my aunts phone

I have already used kies once to upgrade my sgh-i727's firmware to ICS. Anyways my aunt asked if i would do hers for her. I ran kies but after the firmware install had started I got an error message asking me to unplug my phone and boot in to recovery mode. However I can only get the phone to boot into odin mode. Either by turning it on normally i get the error:
odin mode
product name: sgh-727
custom binary download: no
current binary: samsung official
firmware upgrade encountered an issue. please select recovery mode in kies & try again.
Or i can boot in to normal odin mode holding the volume up and down keys while plugging the usb port in. Then I choose volume up to load custom rom i end up at the same error.
I did try endlessly booting into recovery mode holding the volume up and down keys while powering on (also tried just up and just down to ensure i wasn't crazy) and while samsung flashes super briefly i again end up in odin mode with the error message. I tried flashing a stock ICS and gingerbread roms via odin 1.85 but it fails saying there is no pit file. I have searched for a pit file to load but have been unable to find one, in fact I noticed I was not the only one unable to locate one for this model phone.
Even without recovery mode I still did try to do a emergency firmware recovery in odin mode (rather sure it wouldn't work but what the heck) to no avail. I am at a total loss. Does anyone have any ideas how to fix this brick aside from haveing her exchange it with ATT? It is only two days old so that is a possibility if worse comes to worse.
I have scoured the forums, Google and everything else I could think of before asking for help so please don't thrash me if i missed something. some help and a point in the right direction is all i ask. thanks!
atomicWAR said:
I have already used kies once to upgrade my sgh-i727's firmware to ICS. Anyways my aunt asked if i would do hers for her. I ran kies but after the firmware install had started I got an error message asking me to unplug my phone and boot in to recovery mode. However I can only get the phone to boot into odin mode. Either by turning it on normally i get the error:
odin mode
product name: sgh-727
custom binary download: no
current binary: samsung official
firmware upgrade encountered an issue. please select recovery mode in kies & try again.
Or i can boot in to normal odin mode holding the volume up and down keys while plugging the usb port in. Then I choose volume up to load custom rom i end up at the same error.
I did try endlessly booting into recovery mode holding the volume up and down keys while powering on (also tried just up and just down to ensure i wasn't crazy) and while samsung flashes super briefly i again end up in odin mode with the error message. I tried flashing a stock ICS and gingerbread roms via odin 1.85 but it fails saying there is no pit file. I have searched for a pit file to load but have been unable to find one, in fact I noticed I was not the only one unable to locate one for this model phone.
Even without recovery mode I still did try to do a emergency firmware recovery in odin mode (rather sure it wouldn't work but what the heck) to no avail. I am at a total loss. Does anyone have any ideas how to fix this brick aside from haveing her exchange it with ATT? It is only two days old so that is a possibility if worse comes to worse.
I have scoured the forums, Google and everything else I could think of before asking for help so please don't thrash me if i missed something. some help and a point in the right direction is all i ask. thanks!
Click to expand...
Click to collapse
take the battery out, put it in download mode and use odin to just flash a stock 4.0.4 att rom
this has happened to me during a 2.3.6 upgrade and i switched usb ports, pulled battery and plugged back in and used odin to flash a stock 2.3.6
here is the stock att official 4.0.4 http://www.hotfile.com/dl/162779401/27c699c/I727UCLF6_I727ATTLF6_ATT.zip.html
just go to the first link in my sig
thanks my brain was hurting. had already pulled the battery etc but then i retried all my usb ports and that was the hang up for odin at least. you guys are awesome.
atomicwar said:
thanks my brain was hurting. Had already pulled the battery etc but then i retried all my usb ports and that was the hang up for odin at least. You guys are awesome.
Click to expand...
Click to collapse
good to hear
Problem solved?
CM9 Skyrocket
vincom said:
just go to the first link in my sig
Click to expand...
Click to collapse
Dude, I think I just saved my phone. I was freaking out, you have no idea. Thank you so very, very, very much. I'm truly grateful to you!
Seriously, thanks. =]
Thank YOU
vincom said:
just go to the first link in my sig
Click to expand...
Click to collapse
New to the boards; however, I must say THANK YOU to the persons who own and operate these boards. Also a BIG THANK YOU to vincom and everyone else who helps on these boards.
I just went through the exact same dilemma that the person who created this post did. I thought for sure Kies ruined my phone.
Well I used vincom's resolution and my phone is working again AND I have ICS! Thank you!
Those who are saying thanks should click thanks on Vincom's post as well. Sending one his way for you...lol.
Sent from my SGH-I727 using xda app-developers app

[Q] samsung conquer 4g root help

I was trying to root my brothers phone and i made a mistake.
I was on odin starting root the process by installing the FC17 update and having the phone in download mode.
When i clicked start on odin i thought the phone was supposed to go from download mode
to installing the fc17 update, but when the phone turned on and it acted normal i thought something was wrong.
When i looked on odin's message box it said something about the connection being void until something happened
(i cant really remember what it said) so i decided to unplug the phone.
After i unplugged the phone i decided to restart the rooting process.
This time the download mode screen was different and had a warning about installing a custom OS, but i just ignored it.
The problem is this time around odin wasn't recognizing my bro's phone and i don't know what the issue is.
I installed the phone's drivers and the usb ports are fine. I also tried this on a different computer but it didnt work on that one either
so i figured the problem is that something messed up when i unplugged the phone. Odin now doesn't recognize the phone when its in download mode and i need help.

Stuck On Splash Screen, Phone Won't Connect To Odin

Alright, I was running LiquidSmooth 4.4.4 rom when I got an OTA update from them. I downloaded it and when to install it, and ever since, my phone will only boot to the liquidsmooth splash screen and just sit there. I tried to use CWM to recover to my last backup, and now it's completely gone. I'm back to download mode only, not CWM recovery. I figured I'd at least get the phone working and use Odin 3.07 on Windows 8 to flash it. Downloaded drivers for the verizon version of the GS3, installed, rebooted and set to work. Well, Odin won't see my phone. At all. I don't know how to make it connect so I can flash it. Anyone got any advice?
I have kies installed, but it isn't running.
I cannot boot into my phone whatsoever.
I had the usb repaired, and it will charge when plugged in and off.
Someone please help. It's been two weeks and I've tried everything I can think of.
Eroth said:
Alright, I was running LiquidSmooth 4.4.4 rom when I got an OTA update from them. I downloaded it and when to install it, and ever since, my phone will only boot to the liquidsmooth splash screen and just sit there. I tried to use CWM to recover to my last backup, and now it's completely gone. I'm back to download mode only, not CWM recovery. I figured I'd at least get the phone working and use Odin 3.07 on Windows 8 to flash it. Downloaded drivers for the verizon version of the GS3, installed, rebooted and set to work. Well, Odin won't see my phone. At all. I don't know how to make it connect so I can flash it. Anyone got any advice?
I have kies installed, but it isn't running.
I cannot boot into my phone whatsoever.
I had the usb repaired, and it will charge when plugged in and off.
Someone please help. It's been two weeks and I've tried everything I can think of.
Click to expand...
Click to collapse
Try to find a Windows XP PC instead...
well through sheer will and button pressing, I managed to persuade the tech gods to open a hole in the sky and allow me to get back into CWM. I'm restored and up and running again. Chalk it up to "No idea what broke, no idea what fixed"
/thread closed.

[Q] Hard bricked phone to the point of no return...Even kies wont recognize...help!!

Hey guys so my phones kernel and stuff was slightly messed up I know this because wifi didn't always work and it wouldn't work at certain places and if I reset the phones settings or factory the wifi would show up. I then thought hey I need wifi so let me put a custom mod on it. I have rooted my phone easy but never put a custom mod.. I still dont know what it does or what a custom recovery is or whatever. I tried odin and it said failed a bunch of times. I then started trying to use apps like goo manager and busy box and such and had no idea what i was doing other than following instructions blindly and I ended up using an app that was glitched I believe and when ever I started the phone it went into recovery mode. Then I stopped using the phone for a quite a while and one of my friends said he could look at it and determined that it is screwed to the point of no return. So I thought why not go for one last swing at it did some more Youtbing and did another tutorial another tarp or md5 file or whatever it is. I now have that screen which says connect to Kies for emergency firmware recovery or something. I can still access download mode and such but the main problem is 1. odin is still not working 2. Kies is now not recognizing my S4 keeps telling me it doesnt recognize it. I have a Samsung S4 verizon build number is 2g6 I believe I know the ending is 6. Its curruntly on 4.4.2 kit kat.
TLDR: The phone says that i need to hook it up to kies for emergency firmare something but kies wont recognize my phone and I cant do a hard reset and When I flash with Odin it always says Fail when it gets to the boot part
Thanks so much guys you dont know how much any help would be. Please respond this is all I will be doing all day so I can give you all extra info asap.

Help! my sm-n915t bricked

Hello all,
I have flashed ROMs via recovery and Odin plenty of times. I would say I generally know what I am doing and I flash ROMs on the regular. This is my third Samsung device and have been rooting/flashing for almost 3 years, so not a noob. And this is the first time I encounter problem with my phone while flashing ROM.
I was stuck in a bootloop on my Note and it wouldn't even let me boot into recovery, so I decided to Odin and back to stock and try again... I got the one-click, phone recognized, yellow COM box popped up, hit start, walked away for 10-15 minutes. Come back and there has barely been any progress at all... I could barely see the green progress bar. I figured something is wrong because I've done this before and it only takes a minute at most. What I did next is what I think messed me up...I pulled my phone and closed the Odin dialogue box and tried to redo it. Problem is, nothing I could do would get me the Yellow COM box. The phone goes into download mode but Odin doesn't seem to want to recognize it. I've tried EVERYTHING. When I boot the phone normally, I get the Samsung error screen saying there was an issue with a firmware upgrade and I should try Kies. I download Kies and attempt to upgrade firmware but my phone still not recognized. I already tried it to other PC still the same result.
I can't post the pic of my phone.
Is there nothing I can do to restore it?:crying::crying:
ton8_22 said:
Hello all,
I have flashed ROMs via recovery and Odin plenty of times. I would say I generally know what I am doing and I flash ROMs on the regular. This is my third Samsung device and have been rooting/flashing for almost 3 years, so not a noob. And this is the first time I encounter problem with my phone while flashing ROM.
I was stuck in a bootloop on my Note and it wouldn't even let me boot into recovery, so I decided to Odin and back to stock and try again... I got the one-click, phone recognized, yellow COM box popped up, hit start, walked away for 10-15 minutes. Come back and there has barely been any progress at all... I could barely see the green progress bar. I figured something is wrong because I've done this before and it only takes a minute at most. What I did next is what I think messed me up...I pulled my phone and closed the Odin dialogue box and tried to redo it. Problem is, nothing I could do would get me the Yellow COM box. The phone goes into download mode but Odin doesn't seem to want to recognize it. I've tried EVERYTHING. When I boot the phone normally, I get the Samsung error screen saying there was an issue with a firmware upgrade and I should try Kies. I download Kies and attempt to upgrade firmware but my phone still not recognized. I already tried it to other PC still the same result.
I can't post the pic of my phone.
Is there nothing I can do to restore it?:crying::crying:
Click to expand...
Click to collapse
You sound like you have a problem similar to what I had.
I was downloading 6.01 to install using KIES 3 and got no recognition from my Windows 7 based computer when I connected up and ran KIES.
I had the Sammy 1.55.5 USB drivers installed.
What I did it was use KIES,not KIES 3.
Samsung says KIES 3 but that turned out to be wrong in my case,although I'm not sure why?
I'm now running M/M and happily gutting the bloat out of it.
It feels better than new now!
Solved
Anyway, I already solved it!
ton8_22 said:
Anyway, I already solved it!
Click to expand...
Click to collapse
i have the same problem....
how did you solve it?

Categories

Resources