Database Info

[Q] Another Brick Thread - Not recognized by ODIN/ADB??

Hey everyone, I'm quite the lurker on these forums and don't post very often at all. I just want to first and foremost say that everyone here has been amazing and the work that has gone on for this phone is truly astonishing.
Now, with that being said... I'm bricked.
I was running CM7 today and decided (don't ask why) to try that ICS for the i9003. Dumb move. Hopefully someone is getting a laugh out of this as well.
I expected the results to be bad, but not disastrous. In the process of trying to do this I bricked the phone. When I had the ICS ROM on it, it got stuck on the AT&T screen. No worries, I made a back up this morning... I figured just pop back into recovery and restore myself back to normal and everything's fine.
Well, here's where it gets bad. I cannot get into recovery. After multiple attempts of trying to get into recovery. ADB nor Odin even see my phone in download mode. I do have a USB JTAG jig, which has saved me quite a few times.
I started downloading stock ROM's like crazy today. The only one that I could get to install was stock 2.3.5 with Boog's kernel with CWM. I booted into the OS and all seemed well at the time... except there's no modem! I have no internet, service, or anything. This is the only time ADB can see my phone, is when it's booted up. As soon as it's in download mode, ADB can no longer see my phone. The same with ODIN.
ODIN sees my phone when it's booted up, but doesn't actually make the handshake for an install of another version. I've tried to root it, in hopes of being able to push ROM Manager, Super User, and restore my back up in CWM. This didn't work either. During the rooting, using a one-click, it hangs up trying to run the psneuter exploit.
If I'm booted into this 2.3.5 stock of android with no modem, I tried to reboot into recovery using ADB running reboot recovery. This just boots the phone back into Android as if there's no recovery on the device at all.
Soon as I'm back in download mode I cannot push any files with ODIN or ADB. Neither one of them see my device at this point. Even using the JTAG jig.
This is where I'm now at. I'm not sure what else to try at this point. Is there a reason that my device is no longer being recognized in ADB when in download mode?
Any insight would be greatly appreciated. I've been trying to scour forums and search engines with no luck so far. This is my only phone, so it's a little depressing to be without any means of communication on the go, but that's the chance you take...right?
p.s. I do have all the Samsung USB drivers as I normally push files with ADB and have just done so earlier this week. Had the same luck on my computer at work today. So, I know it's not a PC related issue.
Thank you to everyone in advance.

I've also tried to push a modem to the phone with no luck.
I installed 2.3.5 with the Executable JAR of Heimdall AndroidOS 2.3.5 to push the files and that JAR version is the only device that will install to my phone and makes the handshake. Just no modem

You may want to give Heimdall a try - it installs its own USB drivers, so it's possible it might be able to see your phone that way. Nevermind - just saw your post. Which Heimdall did you grab?
Also try switching USB ports - sometimes a different port makes a difference.
There's a one-click in my signature if you need it.

I believe it was the one in your signature to be honest. Which is the only one that recognizes my phone in download mode.
I get it to boot to Android, but that's where I'm stuck. Can't get into CWM from that stock ROM. I'm assuming it would have to be rooted to even use CWM, and I was unable to one-click root it.
edit: Just to be sure I did try the one in your sig. It installs no problem, but ROM manager crashes and the screen distorts right before home screen loads. Once it's loaded it seems OK. Might be a boot loader issue.. but not sure. Once in download moad Odin3 doesn't recognize the device. The one click app does, but not Odin3 v. 1.3 to flash rooted kernel. It just doesn't recognize the device for some reason, but java installer still recognizes it.
I cannot get into CWM as it just crashes. Doesn't reinstall correctly, gets stuck on running privileged commands. Cannot boot into it since it's a privileged command as well. Only version of odin that recognizes my phone is the one in your link and it's a JAR Exe lol. This is the strange part.. no modem. Just got the wifi to work to at least make it to the market place. Still no modem, broadband is 'unknown'.
When I go back into download mode to flash a kernel in Odin v1.3 it doesn't recognize my device. ADB does not recognize my device. The java installer for the stock rom I just used in your sig still recognizes the device. Only the java installer recognizes it. Tried using Heimdall 1.1 for the kernel flash and it also does not recognize my phone.

I do have an HP TouchPad running CM7 alpha 2.1 as well. Not sure if this will help, unless someone can think of something clever by having an extra Android device. Just throwing it out there.

sunfirex said:
I believe it was the one in your signature to be honest. Which is the only one that recognizes my phone in download mode.
I get it to boot to Android, but that's where I'm stuck. Can't get into CWM from that stock ROM. I'm assuming it would have to be rooted to even use CWM, and I was unable to one-click root it.
Click to expand...
Click to collapse
As far as I know, that should have CWM installed in the file. Depending on which bootloaders you have, either holding V+ and Power from a powered-off state, or V+/V-/Power should put you straight into CWM.
If that isn't working for you, but you're at least on a Gingerbread rom, try this. It appears Heimdall is ok with your phone, and this kernel I'm certain has CWM baked in. You might bootloop, but you should definitely get to CWM from this.

That's exactly what it was. That version of Heimdall in the link you provided solved my issue.
Thank you so much!

Glad to hear it.

Bricked phone. Odin doesnt seem to work. Now what?

Originally one cm7, tried out cm9 but apparently i never got the bootloader right so i was getting rainbows. I tried to switch to emancipation and that loaded up fine. went and made one more attempt to cm9 but no luck. i am not stuck at the samsung logo. If Odin connects it gets to the step that says setup connection but never moves past. What are my options? I don't even care what rom i'm on as long as i can use the phone. cm9 gives and error if i try and flash. i can still access red CWM. emancipation will flash and say complete but if i reboot it just sits as the samsung logo. i checked mounts and no matter what i cant mount system which i think is my problem. i can no longer see the phone from my pc either. so i don't believe i can get another rom to it from the pc.
Any help is appreciated, screen shots or explanation for dummies is much appreciated. I've done this before but have never been stuck like this where i couldn't get back to a working rom stock or otherwise.
Thanks,
Joe

Try qksters heimdal to stock and see. If no luck, try Odin again(gtgs unbrick)but try with every USB port until it works. Sometimes Odin likes to prefer a certain one. Anyways, I prefer using the heimdall package. A lot more easier in my opinion
Try a pizza taco sometime, if you don't know what it is, look it up then

did you wipe user data,cache,and delvic

yes. also finally got hemidall to load on the home pc but phone would never connect. even if i went through cwm and put it into download mode.

Kies wont see phone ive tried that too. pc sees it and load drivers but it wont connect. i cant even see it as a mass storage on the pc anymore. gunna try odin from my work pc. If anyone can help it would be great i need to fix this asap as im in the middle of purchasing a house and have quite few people im going back and forth with.

asadjewonxmas said:
yes. also finally got hemidall to load on the home pc but phone would never connect. even if i went through cwm and put it into download mode.
Click to expand...
Click to collapse
You need to install the drivers that come with hemidall before it will connect to your phone
Sent from my HTC PH39100 using Tapatalk 2

got odin to work. i needed a different usb cable.

I had a similar problem, except I was unable to flash any from after attempting to flash cm9. Im on vacation away from my computer so I was unable to Odin, I just kept using the three finger method to get into recovery. And kept trying to flash a different roms always getting stuck at the Samsung logo...after about 1-2 hours of continuesly flashing i was finally able to flash a rom-after my phone finally booted up I booted into recovery which was now red again and instead of flashing the kernel I just flashed cm9 again. Got stuck on Samsung logo booted into recovery which was once again rainbowish and reflashed and then I booted up into cm9!!!
So basically for those who are away from a computer just keep attempting to flash-it worked for me just took a looooong time
Sent from my SGH-I997 using XDA

[Q] I'm in it deep & really need some knowledgeable help with my bricked S3

My Phone sprint S3 SPH-L710 is rooted with a stock4.1.2 rom. I was going to put my phone in recovery to do a backup because I wanted to flash ND8 then a new Kit Kat rom. The phone wouldn't boot to recovery. I read something about using Kies if this happens. I updated Kies and connected the phone to it. Now it boots to the "Samsung" on the screen and goes to small windows with "unfortunately the process.com.android.phone has stopped" when I hit OK it says ".process.acore has stopped". It goes in to some more windows sometimes. can I fix this or am I screwed. If the only thing to do is flash the phone with ND8 with Oden so be it, I'm not sure how at this point to do that. Okay I was advised to try this: forum.xda-developers.com/showthread.php?t=1840030. I never got the first bootloader to "pass" but somehow after I did it I was able to boot in to download mode. I tried to flash the second bootloader and it wouldn't even show up in the PDA line in Odin. I really need to get my phone working again as it's my only one I have and I'm traveling either later today or tomorrow.

Did i bricked my GT?

Hello. Yesterday i tried to do a full restore in my Galaxy N8000 (factory) and, as an user of the Bliss Pop, something went wrong and now my tablet doesn't even start anymore. He looks like will start, but then the screen seens to turn on and off again, and so it goes on.
I downloaded the firmware from SamMobile, thinking that maybe i should use Odin and reinstall some stock ROM (i don't even know if i'm doing it right), but it seens like i can't plug it to my computer, Odin doesn't recognize (i've downloaded the Samsung Drivers from the Samsung website, but still nothing). How can i bring my GT back to life again? Please, really, if someone could help me would be so nice and i'll be grateful forever, because i use the tablet for studying and can't be without him. So, thanks in advance, and sorry for the bad english.

As opposed to just attempting to turn it on, have you tried booting directly into recovery (I'm going to assume TWRP)? If that works, you could attempt to reflash the last version of Blisspop that you had. I do know that Odin will not recognise your device unless you've booted into Download Mode first.

DarkHybridx said:
As opposed to just attempting to turn it on, have you tried booting directly into recovery (I'm going to assume TWRP)? If that works, you could attempt to reflash the last version of Blisspop that you had. I do know that Odin will not recognise your device unless you've booted into Download Mode first.
Click to expand...
Click to collapse
Yeah, i can't access the recovery... now Odin recognize my Tablet, but i'm getting the message Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again, but Kies doesn't recognize my GT. What do i do? Flash a new firmware via Odin?

Yes. See if reflashing firmware would do you any good. However, NAND write fails are a bit more advanced...

Help! my sm-n915t bricked

Hello all,
I have flashed ROMs via recovery and Odin plenty of times. I would say I generally know what I am doing and I flash ROMs on the regular. This is my third Samsung device and have been rooting/flashing for almost 3 years, so not a noob. And this is the first time I encounter problem with my phone while flashing ROM.
I was stuck in a bootloop on my Note and it wouldn't even let me boot into recovery, so I decided to Odin and back to stock and try again... I got the one-click, phone recognized, yellow COM box popped up, hit start, walked away for 10-15 minutes. Come back and there has barely been any progress at all... I could barely see the green progress bar. I figured something is wrong because I've done this before and it only takes a minute at most. What I did next is what I think messed me up...I pulled my phone and closed the Odin dialogue box and tried to redo it. Problem is, nothing I could do would get me the Yellow COM box. The phone goes into download mode but Odin doesn't seem to want to recognize it. I've tried EVERYTHING. When I boot the phone normally, I get the Samsung error screen saying there was an issue with a firmware upgrade and I should try Kies. I download Kies and attempt to upgrade firmware but my phone still not recognized. I already tried it to other PC still the same result.
I can't post the pic of my phone.
Is there nothing I can do to restore it?:crying::crying:

ton8_22 said:
Hello all,
I have flashed ROMs via recovery and Odin plenty of times. I would say I generally know what I am doing and I flash ROMs on the regular. This is my third Samsung device and have been rooting/flashing for almost 3 years, so not a noob. And this is the first time I encounter problem with my phone while flashing ROM.
I was stuck in a bootloop on my Note and it wouldn't even let me boot into recovery, so I decided to Odin and back to stock and try again... I got the one-click, phone recognized, yellow COM box popped up, hit start, walked away for 10-15 minutes. Come back and there has barely been any progress at all... I could barely see the green progress bar. I figured something is wrong because I've done this before and it only takes a minute at most. What I did next is what I think messed me up...I pulled my phone and closed the Odin dialogue box and tried to redo it. Problem is, nothing I could do would get me the Yellow COM box. The phone goes into download mode but Odin doesn't seem to want to recognize it. I've tried EVERYTHING. When I boot the phone normally, I get the Samsung error screen saying there was an issue with a firmware upgrade and I should try Kies. I download Kies and attempt to upgrade firmware but my phone still not recognized. I already tried it to other PC still the same result.
I can't post the pic of my phone.
Is there nothing I can do to restore it?:crying::crying:
Click to expand...
Click to collapse
You sound like you have a problem similar to what I had.
I was downloading 6.01 to install using KIES 3 and got no recognition from my Windows 7 based computer when I connected up and ran KIES.
I had the Sammy 1.55.5 USB drivers installed.
What I did it was use KIES,not KIES 3.
Samsung says KIES 3 but that turned out to be wrong in my case,although I'm not sure why?
I'm now running M/M and happily gutting the bloat out of it.
It feels better than new now!

Solved
Anyway, I already solved it!

ton8_22 said:
Anyway, I already solved it!
Click to expand...
Click to collapse
i have the same problem....
how did you solve it?