When I got the Inspire, they hadn't put in the IMEI and I got the "H+" with a check mark. They fixed that and the check was replaced by the up/down arrows. I noticed that the APN had virtually no settings:
APN - Phone
MMS Protocol - wap 2.0
MCC - 310
MNC - 410
everything else is "not set"
When I rooted and installed AFR001 and later AFR002, the APN was hard-coded to:
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username:[email protected]
Password:CINGULAR1
Server: not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 8080
MCC:310
MNC:410
APN Type: *
I no longer get an "H+", but simply an "H". I have read conflicting reports that the "4G" connection won't work with the APN settings I have as they're 3G only. So the question is, how do we get the "4G" APN on the phone? If I make a new APN and set the settings manually to what appeared in the stock ROM, I get no data connection whatsoever.
Don't quote me here, but I'm pretty sure the afr001 and afr002 ROMs don't have an H+ icon since they are the European Desire HD ROMs. So you may be getting 4G HSPA+, but it doesn't have an icon for it.
Sent from my Desire HD using XDA App
I believe the best thing to do now is to just wait for the stock ROM to be rooted. It looks like the Desire HD ROMs are not 4G compatible.
Not compatible, really!? I have no other issues on AFR002 than that. I thought it would be simple
Sent from my Inspire using XDA App
meatrocket said:
Not compatible, really!? I have no other issues on AFR002 than that. I thought it would be simple
Sent from my Inspire using XDA App
Click to expand...
Click to collapse
AFR002 is based on the Telus ROM, not the European ROM, however it may not have the H+ icon either, but I'm sure that it can support HDSPA/HUSPA just fine.
I was hoping to find out final clarification on the APN question as well. If I use the 3G APN, will I need a new APN to get 4G speeds. If so, what are the settings for the 4G APN?
Sent from my Inspire using XDA App
I get the same speed results with both of them, wap. cingular and phone settings. The only difference is when I switched to phone I got a message saying "conection failed" but I was able to use data. I'm using AFR001
Ok, thanks for the info. I'm guessing the APN issue is pure speculation @ this point anyway until AT&T's backhaul is complete.
Sent from my Inspire using XDA App
It's unclear. After my imei was updated, I checked the APNs and there are two with lock icons. Maybe if we could check with someone that has real H+ service who could check download speeds with and without the 3G APN.
Sent from my Inspire 4G using XDA App
+1 I've been playing with APNs all day trying to figure it out. Network info shows HSDPA.
to clean up the APN issue: The APNs with the lock are from ATT with only one or two settings off to control tethering. When you use the custom APN settings you get tethering even on the stock ROM without a special tethering plan.
When I talked to AT&T they told me there is no special Sim card or APN setting for 4G. 4G is a hardware issue, but AT&T has only released 4G speeds in SOME areas, LA and Orange County do not have it yet. The whole network will be up and running by year end. The H+ is just an icon that AT&T put in the ROM, they don't even have the H icon, if you are on 3g or 4g it will still say H+ because this is there way of marking something they don't have yet. Mush like the EVO when it first was released Verizon didn't even have 4g running anywhere but they had commercials all over the place for a product they could not deliver.
Related
spent the last few hours trying to find the APN settings for the bell sensation to work on the "4G" AT&T network. Tried quite a few and merged some info from the Galaxy S2 xda forum. This is what I have come up with:
Name - AT&T HSPA+
APN - phone
Proxy - not set
Port - not set
Username - not set
Password - not set
Server - not set
Mmsc - not set
Mms proxy - not set
Mms port - not set
Mms protocol - wap 2.0
Mcc - 310
Mnc - 410
Auth type - not set
APN type - default
Next APN
Name - MMS
APN - wap.cingular
Proxy - not set
Port - 80
Username - [email protected]
Password - cingular1
Server - not set
Mmsc - http://mmsc.cingular.com
Mms proxy - wireless.cingular.com
Mms port - 80
Mms protocol - wap 2.0
Mcc - 310
Mac - 410
Auth type - not set
APN type - mms
I'm getting about 4.5 down and 1.5 up. Prior to using these settings I'd be lucky to get 1 down and .5 up.
I'm on the unlimited 4g plan and living in Phoenix
Hi,
Thanks for what you wrote but are you geting the "H+" or just the "H"?
Muhamadabdelaall said:
Hi,
Thanks for what you wrote but are you geting the "H+" or just the "H"?
Click to expand...
Click to collapse
Just the H
We dont have HSPA+ service active where I live (phoenix, az)
alejate76 said:
Just the H
We dont have HSPA+ service active where I live (phoenix, az)
Click to expand...
Click to collapse
I have tried everyway online to get the "H+" speed which available in my area but I failed!!
Muhamadabdelaall said:
I have tried everyway online to get the "H+" speed which available in my area but I failed!!
Click to expand...
Click to collapse
I'm having the same issue...do you know if it is just the speed?
what is average H+ speed on AT&T supposed to be?
i'm starting to wonder if the stock roms on AT&T just lie about it being faster than H, given some other threads on the atrix/inspire forums.
I just got the bell sensation today...and I'm getting only Edge speeds on my phone
I also have SGS2 and with the same apn settings i get 1.5 - 2Mbps down, but with sensation im getting only 50 - 100 kbps down. Something is wrong, do i need to flash some different baseband or anything else i need to do to get decent speeds on ATT?
EDIT: And I'm on the $15 unlimited data for Non-Smartphones.
kirdroid said:
I just got the bell sensation today...and I'm getting only Edge speeds on my phone
I also have SGS2 and with the same apn settings i get 1.5 - 2Mbps down, but with sensation im getting only 50 - 100 kbps down. Something is wrong, do i need to flash some different baseband or anything else i need to do to get decent speeds on ATT?
EDIT: And I'm on the $15 unlimited data for Non-Smartphones.
Click to expand...
Click to collapse
I am running 100% stock software, radio, baseband from bell canada on at&t network and achieving pretty good speeds compared to other devices I own.
I could be wrong, as I don't work for at&t, but if you are on the non-smartphone plan I think that will be limiting you to the 2g/edge network only as your account on that line isn't provisioned for 4g data. The plan you are using is for old flip phones like the motorola razor.
When you are using the Galaxy S2 - is that also on the non-smart phone plan? What if you take the sim card from the S2 and put it in the sensation? same results?
kirdroid said:
I just got the bell sensation today...and I'm getting only Edge speeds on my phone
I also have SGS2 and with the same apn settings i get 1.5 - 2Mbps down, but with sensation im getting only 50 - 100 kbps down. Something is wrong, do i need to flash some different baseband or anything else i need to do to get decent speeds on ATT?
EDIT: And I'm on the $15 unlimited data for Non-Smartphones.
Click to expand...
Click to collapse
Hi,
I was exactely in your situation because Bell settings arent configured for AT&T HSPA, all you have to do is install from the market program called "APN Tweakker" & run it for "AT&T Voice & Data" & you will get the "H" rightaway.
alejate76 said:
I am running 100% stock software, radio, baseband from bell canada on at&t network and achieving pretty good speeds compared to other devices I own.
I could be wrong, as I don't work for at&t, but if you are on the non-smartphone plan I think that will be limiting you to the 2g/edge network only as your account on that line isn't provisioned for 4g data. The plan you are using is for old flip phones like the motorola razor.
When you are using the Galaxy S2 - is that also on the non-smart phone plan? What if you take the sim card from the S2 and put it in the sensation? same results?
Click to expand...
Click to collapse
Yes same sim as sgs2 and same non smartphone data plan. It started working fine after sometime I posted the question here so no issues
And also the medianet $15 will not reduce speeds. I have tried the 4G att plan with tweaked APN settings on both sgs2 and sensation, they give me same speeds as the medianet plan.
Sent from my HTC Sensation Z710e using XDA Premium App
Does the network indicator on the Sensation distinguish between HSPA and HSPA+, at all?
I'm on TMobile with the Sensation 4G. Of course they changed they "H+" indicator to "4G", since they call HSPA+ 4G. I have never seen the "H" indicator on my device, only "4G", "E", "G" etc.
Don't think so, it only displays H, 3g, E in my case. SGS2 displays only H+, 3g, E. Both cases speeds are same.
Sent from my HTC Sensation Z710e using XDA Premium App
Will these settings work for the Bell Incredible S on AT&T?
Hey guys,
When browsing, and it says 4G on the Rogers One X...is that LTE? Mine always says 4G, but NEVER said LTE..any ideas how to find out if it's using LTE?
When I go to phone status, and network status, it shows HSPA or HSPA+...
i believe it says 4G then lte right under it
your probably on hspa+ ?
When on LTE, it will say LTE.
When on HSPA+, it will say 4G.
The Rogers LTE network is still extremely small, so you might not be in a serviced area. You can check their map here: http://www.rogerslte.com/lte-in-your-area
~David said:
When on LTE, it will say LTE.
When on HSPA+, it will say 4G.
The Rogers LTE network is still extremely small, so you might not be in a serviced area. You can check their map here: http://www.rogerslte.com/lte-in-your-area
Click to expand...
Click to collapse
I am in an LTE covered area...and have the Rogers One X and LTE SIM card...and I have the small business plan, which they confirmed has LTE data...but am not getting LTE data speeds...
Do they actually have to enable LTE on my account?
hkalltheway said:
I am in an LTE covered area...and have the Rogers One X and LTE SIM card...and I have the small business plan, which they confirmed has LTE data...but am not getting LTE data speeds...
Do they actually have to enable LTE on my account?
Click to expand...
Click to collapse
Nope, you should be good to go.
Is your APN configured correctly?
Name: Rogers LTE
APN: ltemobile.apn
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 302
MNC: 720
Authentication Type: None
APN Type: *
APN enable/disable: APN enabled (default)
Bearer: Unspecified
(Is it just me, or does it seem like people are having better luck with the Rogers One X on Telus and Bell than they are on Rogers? )
~David said:
Nope, you should be good to go.
Is your APN configured correctly?
Name: Rogers LTE
APN: ltemobile.apn
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 302
MNC: 720
Authentication Type: None
APN Type: *
APN enable/disable: APN enabled (default)
Bearer: Unspecified
(Is it just me, or does it seem like people are having better luck with the Rogers One X on Telus and Bell than they are on Rogers? )
Click to expand...
Click to collapse
I have checked everything; still no LTE..I think they have to enable LTE at the account level probably. Doesn't seem to be anything else.
hkalltheway said:
I have checked everything; still no LTE..I think they have to enable LTE at the account level probably. Doesn't seem to be anything else.
Click to expand...
Click to collapse
hkalltheway iam having the same issue as you! They actually replaced my device and gave me a new htc one x, switched my sim card twice and have escalated my problem to senior tech support. APN is correct, lte is on auto. I even tried forcing it into lte by going into the phone menu by pressing *#*#4636#*#* and selecting LTE only.
My plan is lte as the last 2 phones i have had were lte (sgs 2 lte & raider). They both never had an issue receiving an lte signal. I'm close to downtown toronto so im in an area where the LTE signal is strong.
I'm wondering if you are having the same issue as me. At least it seems like it. Call rogers and have them open up a case. It has been a week and they still haven't fixed the issue.
did you have an lte phone prior to the one x?
It will say LTE in the Notification Bar ...
mattymon said:
hkalltheway iam having the same issue as you! They actually replaced my device and gave me a new htc one x, switched my sim card twice and have escalated my problem to senior tech support. APN is correct, lte is on auto. I even tried forcing it into lte by going into the phone menu by pressing *#*#4636#*#* and selecting LTE only.
My plan is lte as the last 2 phones i have had were lte (sgs 2 lte & raider). They both never had an issue receiving an lte signal. I'm close to downtown toronto so im in an area where the LTE signal is strong.
I'm wondering if you are having the same issue as me. At least it seems like it. Call rogers and have them open up a case. It has been a week and they still haven't fixed the issue.
did you have an lte phone prior to the one x?
Click to expand...
Click to collapse
I agree with a few of the others. If you're using LTE, it will actually say LTE in the Notification Bar, right above the signal strength bars.
If it says 4G, then you're only on HSPA+.
If you're not getting the LTE to display, and you ARE in an LTE area, then I would definitely call Rogers and have this issue resolved.
Peter
I'm having a similar issue unfortunately, albeit mine is with Bell. I've unlocked the device and purchased an LTE sim card and in multiple LTE service areas with only 4G connectivity. Speed tests are in the 6-10mb speeds for HSPA.
Curious if this is an issue with the phone as others are having problems too.
martsin said:
I'm having a similar issue unfortunately, albeit mine is with Bell. I've unlocked the device and purchased an LTE sim card and in multiple LTE service areas with only 4G connectivity. Speed tests are in the 6-10mb speeds for HSPA.
Curious if this is an issue with the phone as others are having problems too.
Click to expand...
Click to collapse
are you using the proper Bell LTE apn?
I was having the same problem with my Rogers account and it turned out it was an issue with the account not my device. In my case they added the LTE to my account but it is incompatible with older data plans in my case I have the 6GB for $30.00. They have since told me that in order to get the service to work I need to update to an LTE data plan which I really don't want to do as it will cost double what I am paying now hahaha so I think I will live with the 6-10mbps I am getting now
10GB for $50 ...
slegrand said:
I was having the same problem with my Rogers account and it turned out it was an issue with the account not my device. In my case they added the LTE to my account but it is incompatible with older data plans in my case I have the 6GB for $30.00. They have since told me that in order to get the service to work I need to update to an LTE data plan which I really don't want to do as it will cost double what I am paying now hahaha so I think I will live with the 6-10mbps I am getting now
Click to expand...
Click to collapse
Actually, Rogers routinely comes out with DATA plan deals. I have 10GB for $50, which also comes out every so often. The more common "6GB for $30" is offered frequently.
Yes, it's true that you need not just an LTE SIM card, but to have your account set up for access to their LTE network. I just didn't realize it costs more. It didn't cost me more.
Peter
Addendum: My plan, 10GB data, 200 minutes talk, and unlimited Texts in/out is about $83 per month.
mattymon said:
are you using the proper Bell LTE apn?
Click to expand...
Click to collapse
The information I have is there isn't a specific LTE APN similar to Rogers. I'm using pda.bell.ca as my APN. I'm mainly curious if Bell requires a specific LTE data plan or other activation parameters to connect. The people I've spoken to states that this is not required.
If anyone is wondering, I'm on Telus' Flex 60 plan (older plan from before they had LTE) and I did not need to make any changes to my account.
LTE worked off the bat with the standard Telus APN. Although Bell/Telus LTE coverage around here is spotty, I'm just outside their LTE zone on the map.
I have tried 12 different apns but the phone seems to be stuck on edge and wont go over 1.5mbps and my friend who gave me the phone always got 3g/4g in our area I think its on edge because all it has it the little H+ on notification bar
current apn:
apn:att.mnvo
blank
blank......
mms protoal:wap 2.0
mmc310
mnc410
auth type pap or chap
apn type default,supl
mms seems to work fine though any thoughts? Also had a att go phone on st lost apns and it got constant 3g
H+ is 4G HSPA+, shortened to H+
http://forum.xda-developers.com/showthread.php?t=982082 you can try that to help your speeds
Edit: Just reread your post. If it's displaying the H symbol you're on "4G" if it displays an E then you are on edge
Unless it's a typo, your apn is off. att.mvno
Mmc needs to be set
http://mmsc.cingular.com
Mms proxy 66.209.11.33
I don't use the proxy under apn.
http://www.straighttalksim.com/support.php
Settings are also there.
Sent from my Desire HD using Tapatalk
Alpha Whiskey said:
I have tried 12 different apns but the phone seems to be stuck on edge and wont go over 1.5mbps and my friend who gave me the phone always got 3g/4g in our area I think its on edge because all it has it the little H+ on notification bar
current apn:
apn:att.mnvo
blank
blank......
mms protoal:wap 2.0
mmc310
mnc410
auth type pap or chap
apn type default,supl
mms seems to work fine though any thoughts? Also had a att go phone on st lost apns and it got constant 3g
Click to expand...
Click to collapse
H+ is hsdpa(technically 3.5g). It's the fastest connection these phones have. Mine goes anywhere from 2mb to 7mb depending on network traffic. Are you s off and running a custom Rom?
Sent from my Inspire 4G using xda premium
PhatP said:
Edit: Just reread your post. If it's displaying the H symbol you're on "4G" if it displays an E then you are on edge
Unless it's a typo, your apn is off. att.mvno
Mmc needs to be set
http://mmsc.cingular.com
Mms proxy 66.209.11.33
I don't use the proxy under apn.
http://www.straighttalksim.com/support.php
Settings are also there.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
I have not been able to get anything to work without having the proxy set
Apn settings from straighttalk
Name: straight talk
Apn: att.mvno
Proxyroxy.mvno.tracfone.com
Port: 80
MMSC: http://mmsc.Cingular.com
Mms proxy: 66.209.11.33
Mms port: 80
Everything is lower case, and if you have any other apns in there it won't work well at all in my experience.
Sent from my Inspire 4G using Tapatalk 2
mcg177 said:
I have not been able to get anything to work without having the proxy set
Apn settings from straighttalk
Name: straight talk
Apn: att.mvno
Proxyroxy.mvno.tracfone.com
Port: 80
MMSC: http://mmsc.Cingular.com
Mms proxy: 66.209.11.33
Mms port: 80
Everything is lower case, and if you have any other apns in there it won't work well at all in my experience.
Sent from my Inspire 4G using Tapatalk 2
Click to expand...
Click to collapse
That's what I have too
Sent from my Inspire 4G using xda app-developers app
My wife has this phone on straight talk and it works perfect. Heres the apn i have in her inspire.
Name: straight talk
Apn: att.mvno
Proxy: wireless.cingular.com
Port: 80
Mmsc: http://mmsc.cingular.com
Mms proxy: wireless.cingular.com
Mms port: 80
Mcc: 310
Mnc: 410
Then hit menu save and you are in buisness hope it helps. It will take a few for the data to kick back in or just restart the phone
Sent From My Samsung Skyrocket
tat2messiah said:
My wife has this phone on straight talk and it works perfect. Heres the apn i have in her inspire.
Name: straight talk
Apn: att.mvno
Proxy: wireless.cingular.com
Port: 80
Mmsc: http://mmsc.cingular.com
Mms proxy: wireless.cingular.com
Mms port: 80
Mcc: 310
Mnc: 410
Then hit menu save and you are in buisness hope it helps. It will take a few for the data to kick back in or just restart the phone
Sent From My Samsung Skyrocket
Click to expand...
Click to collapse
I have red pocket mobile. And the apn for rpm and st are the same.
Sent from my HTC Desire HD using xda app-developers app
I have read on other forums you must have a sim card from straight talk that is compatible with at&t. Anyone else had to use a special sim who got it to work?
Sent from my Inspire 4G using xda app-developers app
I ordered my sim card on straight talk's site. There was a sim and micro sim if I remember correctly, with pictures of both. $15?
Sent from my Inspire 4G using Tapatalk 2
I wanna get my phone working on Straight Talk as well, and I heard you gotta order a certain kind of SIM for it. Is it just any AT&T SIM? can I go to Wal-Mart and get it? D: someone told me different SIMS have different numbers and such on them and only one for a smart phone from their website, not Wal-Mart, would work. :C
snappycg1996 said:
I wanna get my phone working on Straight Talk as well, and I heard you gotta order a certain kind of SIM for it. Is it just any AT&T SIM? can I go to Wal-Mart and get it? D: someone told me different SIMS have different numbers and such on them and only one for a smart phone from their website, not Wal-Mart, would work. :C
Click to expand...
Click to collapse
go to straighttalk website. You can buy the sim from them and sometimes carry over your #. You can buy any SIM card, but it depends on what network you want it work on and maybe what works in your area the best. such as ATT, Net10, Straighttalk, Tmobile.
Duffmantp said:
go to straighttalk website. You can buy the sim from them and sometimes carry over your #. You can buy any SIM card, but it depends on what network you want it work on and maybe what works in your area the best. such as ATT, Net10, Straighttalk, Tmobile.
Click to expand...
Click to collapse
You can get straighttalksim online and at some walmarts. I got mine online. when you order you select att t-mobile or unlocked depending on the network you plan to use and the phone. If it is an att phone att sim. if t-mobile phone t-mobile sim. Sim unlocked take your pick
OK it looks like straighttalk may be only selling t-mobile sim now. Yesterday at straightalksim.com att sim was not an option. they were still available at walmart online. Straightalksim.com says t-mobile or unlocked.but it says unlocked must work on t-mobile frequencies so it is t-mobile or t-mobile
affiatic said:
OK it looks like straighttalk may be only selling t-mobile sim now. Yesterday at straightalksim.com att sim was not an option. they were still available at walmart online. Straightalksim.com says t-mobile or unlocked.but it says unlocked must work on t-mobile frequencies so it is t-mobile or t-mobile
Click to expand...
Click to collapse
http://www.androidpolice.com/2013/0...-sold-out-of-att-sim-cards-online-dont-panic/
Sent from my Inspire 4G using xda app-developers app
I unlocked my girlfriends hox and was pleasantly surprised to see the H on my notification bar. Unfortunately hspa+ doesn't take advantage of the Hspa+42 but H+21 but hey no time to complain when I was expecting Edge. The real downside is that H is spotty at best and goes in and out of H and E. Not to mention drive a few miles and I am "living on the Edge"
Anyone else using hox on t-mobile/simple moble getting 3G?
Sent from my SGH-T999 using xda premium
If you're in an area where t-mobile is using the 1900mhz band you'll get hspa.
http://airportal.de/
I get it here in Philadelphia. Shows H+ all day.
Sent from my HTC One XL
md1008 said:
I unlocked my girlfriends hox and was pleasantly surprised to see the H on my notification bar. Unfortunately hspa+ doesn't take advantage of the Hspa+42 but H+21 but hey no time to complain when I was expecting Edge. The real downside is that H is spotty at best and goes in and out of H and E. Not to mention drive a few miles and I am "living on the Edge"
Anyone else using hox on t-mobile/simple moble getting 3G?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
You might be able to edit the build.prop to enable HSPA+ 42.
In build prop you will see ro.ril.hsdpa.category=XX According to the spec sheet for the MSM8960 (the chip in the One X), it includes support for Release 9 DC-HSPA+ up to 42.2 megabits. To enable, change the category to 24.
ro.ril.hsdpa.category=24
I'm not sure if it actually works since I don't have a DC-HSPA+ network to try it on, and I don't know if the phone has the right antenna(s), but it's worth a shot. Doesn't seem to be slowing my phone down any.
rbrugman said:
You might be able to edit the build.prop to enable HSPA+ 42.
In build prop you will see ro.ril.hsdpa.category=XX According to the spec sheet for the MSM8960 (the chip in the One X), it includes support for Release 9 DC-HSPA+ up to 42.2 megabits. To enable, change the category to 24.
ro.ril.hsdpa.category=24
I'm not sure if it actually works since I don't have a DC-HSPA+ network to try it on, and I don't know if the phone has the right antenna(s), but it's worth a shot. Doesn't seem to be slowing my phone down any.
Click to expand...
Click to collapse
Speeds aren't so much an issue, the spotty "H+" coverage venture out of my bubble and its all WE. But thank you that is very useful information
Sent from my SGH-T999 using xda premium
same here
I get edge at my work n house but almost everywhere else is 4g lol
adolfo778 said:
same here
I get edge at my work n house but almost everywhere else is 4g lol
Click to expand...
Click to collapse
You are not the only one in this case...
The same situation.
Sent from my HTC One XL using xda premium
Anyone have the settings?
I'm on t-mobile and I just picked up an X but I cna't get HSPA to work, does anyone have the settings? Obviously they do offer HSPA and LTE here in my area so I'm hoping I get this working.
Thanks in advance.
(I have searched and used the nexus 4 setting with no luck)
You could try flashing a new radio. I used to get absolutely no signal at my lease but flashed the 2.40 and now have full edge everywhere out there
-Sugardaddy Duncan
*YOU MUST BE IN A REFARM*
Name:T-Mobile US
APN: fast.tmobile.com
Proxy: Not set
Port: Not set
Username: None (Type None)
Password: ****(Type Asterisk)
Server: **(Type Asterisk)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: Not set
MMS port: Not set
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: Not set
APN type: default,supl,admin,dun,mms
I'm currently on AT&T my HTC one s is SIM unlocked, bootloader unlocked, and S-ON. When ever i start up the rom or stop and start the radio I'll have the 4G symbol(or H+ depending on the rom) and it'll stay there for a minute and then drop down to 2G(or if im on H+ it'll go H+, 3G, H, Edge). On my current rom(SourCE 2.1) If i have 4G it'll stay on 4G until i go to use internet then drop to 2G. Any Ideas on how to keep it 4G/H+?
My APN:
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port:80
MCC:310
MNC:410
Authentication type:None
APN type:default,admin,fota,mms,supl,hipri
Bumb
take a look at your build.prop. (hsdpa, hsupa, hsxpa, fastdormany)
Sent from my HTC One S using XDA Premium 4 mobile app
What do you mean?
Biom4st3r said:
What do you mean?
Click to expand...
Click to collapse
Look at the file /system/build.prop (you need to have root and use a file explorer) these values should be present there.
Those aren't in there, also I'm on cyanogen mod 10.2
Sent from my One S using XDA Premium 4 mobile app