I own 2 Touch Pro 2 devices and if the stylus is in either of them, the devices constantly wake up. This causes battery drain and also interferes with listening to streaming music. I have installed the keep music playing cab which helps but, the sound still fades everytime the device sleeps and/or wakes up. I have tried many locking apps and none have solved the problem. I have tried to remove the sensor but, have not had much luck. I also tried to tape the sensor down but, that doesn't work either. If I edit the registry HKCU\ControlPanel\Keybd\StyluOutStatus (which always has a value of 1 whether stylus is in or out) to 0 it just changes itself back to 1. Please tell me someone has found a solution as I would like to still have my stylus handy in my phone but, I don't want the device to wake when stylus is pulled. I have tried TouchLockPro and Gyrator with no luck and currently have Pocket Shield installed. None of these work as a solution. I have found ways to tell it to go right back to sleep but, the problem is even if it goes right back to sleep the sound still fades and it does it so often that it makes listening VERY annoying!! PLEASE HELP!!!
Related
Hey guys,
This forum has been wonderful for me so I thought I would pass along my own personal experience with a couple of items.
First 'the Clip' case - great - I love mine. For those that have had concerns about the main home/back/menu/search buttons not being lighted, the clip is perfect for helping to find these keys. If you insert your tablet camera up (not upside down to uncover the usb port), the right hand clip is the perfect tactile way to find menu (just above) and back (just below). A good way to navigate these buttons in darker settings.
Second - the static/hissing/white noise problem people have experienced. I know several people have indicated it is a hardware problem and to replace your tablet, that was not an option for me as it did not start until after the 30 day return period. I have found, however, that if you set your screen to NEVER sleep and instead use the power buton to put the screen to sleep, it cuts down on the occurences significantly. Additionally, if it does happen (it has happened twice in the last week), it recovers for itself. You get the noise for ONLY the existing sound that is supposed to be playing and the next sound (whether it is a feedback sound, a notification, etc), it will have corrected itself. At least that's what my experience has been.
To all the developers out there (and especially roebeet) - thanks for everything, I love this tablet due to your hard work. I am running TnT lite 4.2.5 and am very happy with it.
how do you get the screen to never sleep?
Go to settings, display, screen timeout and set to never.
dwebww said:
Second - the static/hissing/white noise problem people have experienced. I know several people have indicated it is a hardware problem and to replace your tablet, that was not an option for me as it did not start until after the 30 day return period. I have found, however, that if you set your screen to NEVER sleep and instead use the power buton to put the screen to sleep, it cuts down on the occurences significantly. Additionally, if it does happen (it has happened twice in the last week), it recovers for itself. You get the noise for ONLY the existing sound that is supposed to be playing and the next sound (whether it is a feedback sound, a notification, etc), it will have corrected itself. At least that's what my experience has been.
Click to expand...
Click to collapse
I understand you in regard of this XD i've been having this sound problem, but bought mine overseas (i'm from Chile) and my brother threw the boxing into the trash, so doubt that there is a cheap way to replace mine .
Do you prefer some ROM in particular? Now i'm toying with VEGAn 7, but i can't play more than 2 or 3 mp3 songs without getting sound off, i'll try your "fix" to see if the situation improves
webman418 said:
Go to settings, display, screen timeout and set to never.
Click to expand...
Click to collapse
hmm.. I guess VeganTAB 5.1.1 doesn't have that option.. bummer..
i had to change the tablet language to english to find that option for some reason
hi,
I'm not sure when exactly this issue started on my phone, but I updated my touch pro with the chevron updater and have quite a lot of apps installed.
after several seconds workling with the phone, the touch screen stops working while the phone acts perfectly normal. I can use the keyboard and tilt the phone but I cannot use the touch screen anymore.
By turning the phone off and on it works again.
has anyone experienced a behavior like this?
I noticed my touchscreen becoming unresponsive when loading particular websites. Even had it freeze once (only time it ever froze on me)
What were you doing when it does this? Do you have the multitasking reg edit on?
exilkubaner said:
hi,
I'm not sure when exactly this issue started on my phone, but I updated my touch pro with the chevron updater and have quite a lot of apps installed.
after several seconds workling with the phone, the touch screen stops working while the phone acts perfectly normal. I can use the keyboard and tilt the phone but I cannot use the touch screen anymore.
By turning the phone off and on it works again.
has anyone experienced a behavior like this?
Click to expand...
Click to collapse
I know this is an old thread but this is the only reference to the exact same problem that I'm having. I'm having difficulty putting this down to hardware as the screen becomes responsive again when locking and unlocking which might point to software.
It could be a hardware issue that is resolved by locking then unlocking the phone but I don't know enough about the construction of it to have an opinion.
The advice I've had from htc is to wipe the 'phone and start again but I don't expect that to solve it (especially as their call handling system refers to Window Mobile 7 - the second large commercial organisation I've seen that on in recent weeks without looking too hard!).
Has anyone else seen this since the original post or @exilkubaner was a solution found to your problem?
Hi,
I have exactly the same problem. I hard reset my HTC 7 Pro, but no success, my screen doesn't respond until i lock/unlock the device.
So, any one have resolved this issue since the first post ?
Regards
Had the same issue, but I didn't have any roms installed.
Brought it in to Sprint and they found that I had a fried ribbon connecting the screen to the phone. Replaced under warranty.
It happened again, I determined that it was caused by my click in belt clip/holster. When I pull the phone out, it pulls the screen away from the keyboard a bit.
^Wow. Nice find. I'll have to be careful with mine now as I could easily run in to the same problem pulling it out like that.
Hi,
I have a problem with proximity sensor.
I looked through many threads here, but they didn't solve it to the end.
Problem:
When I am making/received call, my screen goes blank (near ear or far).
Tried using various apps (ProximityOFF, Sanity, ScreenBl), also tried adding "gsm.proximity.enable=false" to a build.prop file in system, didnt help.
At the moment I am using ScreenBl (it is always on), but it works kinda weird - it helps me keep screen awake during every SECOND call, i.e. call happens - screen off, call happens - screen on, call happens - screen off, call happens - screen on and so on.
Also, during that every second call with screen on, if i press speaker button twice, screen goes off (until call is ended).
So i wanted to ask, maybe someone found a solution of how to PERMANENTLY disable proximity sensor?
Thanks
P.S. I also cant figure out why it happens every SECOND call... maybe if you could help with that, we could find a solution?..
P.P.S. It's a Galaxy S, Darky's ROM, 2.3.3 - worked fine for many months, until couple weeks ago (dont know what changed....)
Edit: Same thing is happening without ScreenBl - still screen is on/off every second call...
hey,
similar issue with my SE xperia x10, the touchscreen broke in that corner where the sensor is so every time i make a call the screen gets locked and i have to remove the battery to end it.
the solution i found was intalling this app: Screen On from the market.
it keeps the screen on when some apps or process are running. i choose "active call".
please excuse my spelling, english is not my native language!
i hope you can solve the issue!!
rgrds,
Manuel
Wondering if anyone has any advice for my weird mic issue - it's a little different to the others I've seen but willing to try anything at the moment. Here's what I've found so far:
*People can't hear me when I talk into the phone. I've tried calling my home phone and listening and I don't hear anything either.
*This problem seems to happen when I'm holding the phone normally (i.e. against my face - ear to the ear speaker and mouth near bottom of the phone's mic)
*If I talk right into the bottom of the speaker (as in have the bottom mic and speaker right in front of my mouth), it picks up audio fine on the other end.
*Speakerphone appears to be fine so secondary mic is working fine.
*Done the usual clean the mic hole with pin (and compressed air), made sure my finger wasn't covering the mic hole, removed any cases, etc.
My suspicion is maybe the proximity sensor is doing something to cause the audio to cut out? I can't imagine the bottom mic being that directional that it picks up nothing in one particular direction while works fine in another.
Phone is bone stock S6 - SM G920W8 running 6.0.1 (Build G920W8VLU3CPC8)
I've already done a factory reset so this thing is as clean as it gets and still no luck. Help!
Apps could be the issue.
Do you have any apps or had any apps in the past that use the proximity sensor on your Galaxy S6? I know that I have had these problems in the past where certain apps that use the proximity sensor, such as the wave your device on and off app that I frequently use interfere with how the microphone detects how far away your face is.
WSADKeysGaming said:
Do you have any apps or had any apps in the past that use the proximity sensor on your Galaxy S6? I know that I have had these problems in the past where certain apps that use the proximity sensor, such as the wave your device on and off app that I frequently use interfere with how the microphone detects how far away your face is.
Click to expand...
Click to collapse
Not that I recall. I did boot the device up in Safe Mode (which should stop any third party app from loading) and the problem still occurred. I also tried it again after I did a factory reset and before I loaded any apps but that didn't help either.
I don't use the gestures at all so I don't think it's that but maybe the factory reset turns it on. I'll see if I can find it to check.
syee said:
Not that I recall. I did boot the device up in Safe Mode (which should stop any third party app from loading) and the problem still occurred. I also tried it again after I did a factory reset and before I loaded any apps but that didn't help either.
I don't use the gestures at all so I don't think it's that but maybe the factory reset turns it on. I'll see if I can find it to check.
Click to expand...
Click to collapse
Well, it looks like gestures were turned on by default. Turned them all off and then turned them on one by one and made a test call and found it's the "Smart Alert" feature that caused the mic to not work when near my face.
Thanks WSADKeysGaming for the reminder about the gestures! I completely forgot about it because I never used them.
Don't mention it!
There are so many settings nowadays that its hard to remember whats on and off, left and right. Glad I could help!
syee said:
Well, it looks like gestures were turned on by default. Turned them all off and then turned them on one by one and made a test call and found it's the "Smart Alert" feature that caused the mic to not work when near my face.
Thanks WSADKeysGaming for the reminder about the gestures! I completely forgot about it because I never used them.
Click to expand...
Click to collapse
Sorry for bumping an old thread, are you familiar with why the Smart Alert feature would do this? Thanks!
I have reading the forum and tried contacting 1+7 also but they just say switch off nfc and so on but till today (1 month since I bought it ) I still have the problem . while making a call it goes on hold or connects another call or something or the other happens and the other person gets irritated as if I am doing on purpose. I am still unable to solve this will changing rom be the solution or can someone please help I am fed up with this instrument
My 2 cents... are you sure that it's a ghost touch issue? To me it seems more a proximity sensor trouble... it is possible that, while in call, screen doesn't go off (or wake up while you're talking) and your ear triggers commands at random.
Try to check that your screen remains black while in call, else you could try to reset sensors with one of the apps available on Play Store.
BTW: I had a similar problem one or two times, but maybe because I wasn't so near the phone while I was talking.
will try out can you advice reset sensors apps
jonsat said:
My 2 cents... are you sure that it's a ghost touch issue? To me it seems more a proximity sensor trouble... it is possible that, while in call, screen doesn't go off (or wake up while you're talking) and your ear triggers commands at random.
Try to check that your screen remains black while in call, else you could try to reset sensors with one of the apps available on Play Store.
BTW: I had a similar problem one or two times, but maybe because I wasn't so near the phone while I was talking.
Click to expand...
Click to collapse
will try out can you advice reset sensors apps
Issue is back again after 9.5.9 update.
IEESH said:
will try out can you advice reset sensors apps
Click to expand...
Click to collapse
Search for "Proximity sensor reset" or similar names. Usually apps like that needs root privileges, btw.
I've had problems with the screen waking up and then causing problems while in call too. This while it's still against my face. Apparently touching my face makes it go into other apps and causes problems. I've had it go into airplane mode, mute and do other weird stuff.
I've had the screen go crazy with multiple chains of taps too, especially while holding it in landscape mode.
Turning the refresh rate down to 60 Hz helped some, but the problem's still there.
I think there's something jacked in their implementation. I came from an S8 that had a curved screen and I never had the phantom tap problems I have with this thing.
Superguy said:
I've had problems with the screen waking up and then causing problems while in call too. This while it's still against my face. Apparently touching my face makes it go into other apps and causes problems. I've had it go into airplane mode, mute and do other weird stuff.
I've had the screen go crazy with multiple chains of taps too, especially while holding it in landscape mode.
Turning the refresh rate down to 60 Hz helped some, but the problem's still there.
I think there's something jacked in their implementation. I came from an S8 that had a curved screen and I never had the phantom tap problems I have with this thing.
Click to expand...
Click to collapse
Disabling double tap to wake resolved my screen wakeup during calls issue...
UPG to 9.5.10 Plz - Issue has disappeared again.
ram4ufriends said:
Disabling double tap to wake resolved my screen wakeup during calls issue...
Click to expand...
Click to collapse
I'll try that, but I don't think I have that enabled. I disabled NFC for the other tap issues and that helped some.
I really wish there was a screen calibration tool. Samsung curved screens have none of these issues.
Do you have a dirty screen protector?
This is a known bug with the proximity sensor, although, actually, I believe the root cause is something else.
Screen does go black, which indicates the proximity sensor is working and recognizes your face is near... But input is still allowed (meaning it does not lock it).
As a result, during a call your face/ear will press whatever is underneath and trigger random actions.
I believe (I hope?) that OnePlus is aware of this issue and they issue a fix.
I think it was briefly fixed for 9.5.9 and then reverted on 9.5.10 since it introduced other issues.
Quality control has been a bit subpar on the OnePlus 7 Pro builds when compared to my previous OnePlus phones...