Related
I have my brand spankin' new TC on Rogers here in canada. Ran the auto connection wizard, great! I have Internet! But I get the cannot connect error every time i send or receive email using outlook. I have tried everything I know, is there something you can suggest? It works fine over WIFI, and ActiveSync via USB. But over the 3G there is nothing!
OK, I figured it out.
For future reference.
When your setting up the email account, do it manually as opposed to allowing the auto set up to happen. And at the outgoing mail server screen select advanced options and make sure it connects to your carrier (In my case "Rogers Internet") internet connection.
Apologies if this has already been asked/answered, but have spent the last two days looking for a solution..
When connected via USB I cannot establish an internet connection, unless I delete the T-Mobile proxy setting.
I've applied the regedit edit that's been mentioned as a solution, but this didn't work.
Is there anyway to use the pass through connection without having to delete the proxy everytime?
The main annoyance is that the phone won't sync with my exchange server whilst connected to the PC. I have mail set up to sync with exchange server and all other items syncing with my PC. My Hermes sync'ed with anything and everything.
Thanks
just leave the proxy out.
T-Mobile's proxy is a pain in the arse and causes all sorts of problems.
I deleted the proxy from my connection on t-mobile nearly three years ago and on every single device i have had since. never had a problem since.
If the proxy is there, it affects ALL internet connections, so when you plug it in to your PC, it is trying to go through a Proxy that you can only access over GPRS.
that's why proxies are a PITA and should be deleted permanently.
and no, it should not affect anyhting if you delete it. or not that i have noticed anyway.
Thanks will give it a go when I get home.
Seem to be able to access internet without the proxy, but forgot my usb cable so can't test pass though at work.. fingers crossed!
When I deleted the proxy I couldn't then send SMS texts...?
That's a completely random coincidence. The proxy has nothing to do with SMS whatsoever.
you can of course make sure that you are using GSM for SMS. start>settings>connections>advanced network>SMS
set it to GSM. if this is already set, then it has nothing to do with the proxy.
Says "Your text message cannot be sent" after I removed the proxy. SMS is set to GSM. Could it have altered any other relevant settings? Have put the proxy back now but it still refuses to send the message.
Any ideas?
no, wouldn't have changed anything else. The proxy has no bearing on SMS whatsoever.
Like i said, i reckon it is just a coincidence, otherwise turning the proxy back on would have fixed it.
If it is set to GSM already try the other three settings as well.
and a soft reset of course....
Have found a cable and tested - still no joy after deleting proxy.
Connecting to PC, and items syncing with host PC are fine. Mail syncing with Exchange server fails and can't access internet via pass through.
Browsing and syncing with the exchange server is fine when not connected to the PC.
Btw kempas - SMS works fine after deleting the proxy setting, as it should do.
Steve
on the handset:
start>settings>connections>wifi (NOT Wireless LAN)> network adapters
set the drop down box to Internet.
On the PC:
Open Activesync>File>Connection Settings
Set "This computer connects to" to the internet.
Dunno what it is in vista, i have avoided it like the plague....
I did a soft reset and tried again (a couple of time) with no luck, unable to send text message.
Went to settings, connections and run through the network provider setup wizard, let it reset the phone and tried again. Settings 'seemed' all the same but SMS now sent without issue.
Will try removing the proxy again later and testing with another SMS.
EDIT: removed the proxy and sent an SMS without issue this time... So was a "completely random coincidence" as rhedgehog said.
Still can't access You Tube via it's mobile client though, at least, it still says no videos...
All now appears to do what I expect after removing proxy and following rhedgehog's advice. Pass through now works Many thanks!
Also appeared that the t-mobile proxy blocks Windows live and messenger
stevecg said:
All now appears to do what I expect after removing proxy and following rhedgehog's advice. Pass through now works Many thanks!
Also appeared that the t-mobile proxy blocks Windows live and messenger
Click to expand...
Click to collapse
Are you on wnw+??
mrvanx said:
Are you on wnw+??
Click to expand...
Click to collapse
Just Web N Walk I believe, not plus, so I guess messenger is a no no. Will bypassing their proxy end up with me being charged for data??
stevecg said:
Just Web N Walk I believe, not plus. Will bypassing their proxy to use messenger end up with me being charged for data??
Click to expand...
Click to collapse
No, but it is against the t&cs to use IM software when on basic web n walk. Tmobile block the ports for IM software anyways, it seems for new customers since several old customers managed to get through.....i never could though, so the proxy would make no difference if it is on or off.
I personally am on wnw+ which is TOTALLY worth it for using the HSPA when out with my laptop on location.
Cheers for that. Won't really need messenger to be honest - but the proxy setting interfering with the pass through was annoying.
kempas said:
Still can't access You Tube via it's mobile client though, at least, it still says no videos...
Click to expand...
Click to collapse
Log into My T-Mobile or call customer services and get the adult content filter turned off.
I think they blocked it to prevent kids blowing mummy and daddy's credit on watching videos.
Of course, Streaming is also against the T&C's of wnw standard, so it could be that this is why. I'm on wnw+ and had to turn off the filter to get it working.
Yep, that was it. Cheers for the reply...
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Email via Operator..
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
Do you need to download this?
http://www.microsoft.com/downloads/details...amp;tm#filelist
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
have u correct settings? try use built in setting configurator then restart.
i have the same issue. but i think it is normal becuase i dont think you can download email from edge, only 3g.
tengtou said:
i have the same issue. but i think it is normal becuase i dont think you can download email from edge, only 3g.
Click to expand...
Click to collapse
Thats not true because I have a at&t fuze and download email on edge all the time.
server?
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
FUZEinMYpants,
Are you using a large outfit like gmail or something like your company email? If the latter, does it only work on wifi when you are on your company's wifi network or Starbucks' wifis as well?
The reason I'm asking is that depending on the email servers (there are two, one for sending, the other for receiving mostly) you may only be able to interact with them if your coming from an IP address that falls within the range of whatever the administrator set. I for example could not send email when I went down to Florida because AT&T gave me a too different IP address than what I get in New York so I had to ssh into my email server and modify the range.
Your admin may only allow email to be relayed out and/or read if you're on the LAN which in this case, in your office or college on their wifi network connected to the local area network to which the mail servers are connected.
If that's not it then we may have a connectivity problem with your settings. Maybe a bad proxy configuration, your email server doesn't like wap.cingular which is behind a nat, maybe your email server requires a type of encryption you're either not specifying or is not supported by Pocket Outlook, maybe they're using imap and not pop and you're mixing that up, maybe they don't have encryption but they used funky ports for the vanilla protocols -- I'm going to stop typing until you tell me what the story is with your email setup.
In the meantime, to hold yourself over with the phone and without wifi, consider getting your mail through a webmail thing your server may run (I run roundcube) using Opera or PIE, depending on the webmail interface.
Doug
d0ugie said:
FUZEinMYpants,
Are you using a large outfit like gmail or something like your company email? If the latter, does it only work on wifi when you are on your company's wifi network or Starbucks' wifis as well?
The reason I'm asking is that depending on the email servers (there are two, one for sending, the other for receiving mostly) you may only be able to interact with them if your coming from an IP address that falls within the range of whatever the administrator set. I for example could not send email when I went down to Florida because AT&T gave me a too different IP address than what I get in New York so I had to ssh into my email server and modify the range.
Your admin may only allow email to be relayed out and/or read if you're on the LAN which in this case, in your office or college on their wifi network connected to the local area network to which the mail servers are connected.
If that's not it then we may have a connectivity problem with your settings. Maybe a bad proxy configuration, your email server doesn't like wap.cingular which is behind a nat, maybe your email server requires a type of encryption you're either not specifying or is not supported by Pocket Outlook, maybe they're using imap and not pop and you're mixing that up, maybe they don't have encryption but they used funky ports for the vanilla protocols -- I'm going to stop typing until you tell me what the story is with your email setup.
In the meantime, to hold yourself over with the phone and without wifi, consider getting your mail through a webmail thing your server may run (I run roundcube) using Opera or PIE, depending on the webmail interface.
Doug
Click to expand...
Click to collapse
Its yahoo mail. My company email which is an outlook exchange server works fine on wifi or edge.
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
Check the setting in your email settings under advanced server settings and make sure that it says Netowrk conncetion media net or att isp. I have seen it default to Work and that locks it into Wifi. I send and recieve email everyday on EDGE since I do not have 3g within 40 miles of here.
Dane Austin said:
Check the setting in your email settings under advanced server settings and make sure that it says Netowrk conncetion media net or att isp. I have seen it default to Work and that locks it into Wifi. I send and recieve email everyday on EDGE since I do not have 3g within 40 miles of here.
Click to expand...
Click to collapse
I checked this its set to media net
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Looks like u have it set ok. I have to do [email protected]/password and run it multiple times to get it to sync the first time. Keep trying its not perfect at all. You can also try droidmail if u still can't get it
Tenacious--M said:
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Click to expand...
Click to collapse
I would ask your IT dept. for the exact server information to be sure you are inputting the correct server info. Everything else is good to go in your setup so it has to be the server name is not correct causing the failed connection.
Tenacious--M said:
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Click to expand...
Click to collapse
Take out the domain setup all together.
I run SBS 2003 and you do not need to set up the domain. I run the following on dozens of phones.......
Domain/Username (must be exact usually with no spaces)
Password (case sensitive)
Exchange Server (mail.yourcompany.com)
uncheck Use secure connection (You can check it later if you wish after you have it working)
Hope this helps! If so please hit the thanks button for me!
For the exchange server try using the IP address of the server. This is the only way I could get mine to work.
This sounds silly, but have you ever connected another phone to this server? That setting isn't always available. Also, I've found the / or \ can make a huge difference. Also, check to make sure you are using the primary email account and not a secondary alias for the username. The email address can be an alias but username has to be the actual NT username. Hope that helps!
Sent from my SAMSUNG-SGH-I997 using XDA App
Have been using Exchange for years and work very closely with our Exchange guy's and the username must be Domain\Username if you are on a 2003 box and usually but not always the username on 2007/2010 would be the email address but the Domain\Username should also work according to the experts. If you are using Active Sync which we are I am pretty sure that SSL is a requirement because it connects to Exchange using RPC over HTTP protocol and requires SSL being enabled. Like I said a quick call to your IT people should get it working toot sweet.
Blackberrynomore said:
Have been using Exchange for years and work very closely with our Exchange guy's and the username must be Domain\Username if you are on a 2003 box and usually but not always the username on 2007/2010 would be the email address but the Domain\Username should also work according to the experts. If you are using Active Sync which we are I am pretty sure that SSL is a requirement because it connects to Exchange using RPC over HTTP protocol and requires SSL being enabled. Like I said a quick call to your IT people should get it working toot sweet.
Click to expand...
Click to collapse
I use SBS2003 and do not have the domain name. User name only. (the domain username though) Been working for years that way. mail server is the important one to have the domain address correct in. mail.xxxxxxx.com
If I put the domain name in front of the username it does not connect.....
I suddenly have a problem after loading Zeus. My external SD card is working fine then when I set up the exchanger server and get my mail working it wants to encrypt the SD card (according to company policy)
Now I no longer have access to the SD card, it says cannot mount or format and I if I remove the exchange account I get the SD card back.
madpb said:
I suddenly have a problem after loading Zeus. My external SD card is working fine then when I set up the exchanger server and get my mail working it wants to encrypt the SD card (according to company policy)
Now I no longer have access to the SD card, it says cannot mount or format and I if I remove the exchange account I get the SD card back.
Click to expand...
Click to collapse
Mine is doing the exact same thing. I loose the external SD card and I get it back if I remove the exchange account.
Any ideas??
I still cannot figure out why I loose my external SD card.I have re imaged the phone, changed sd-cards.. no fix in sight
I am having a problem with my gmail accounts not syncing.
(no market either)
I have a normal account ([email protected]). This account will receive email almost instantly and display a notification but only when connected to wifi. If I am connected to Network (3G/4G) it will not receive my email automatically. The "sync logo" that typically spins to indicate that item is currently syncing is there but new mail will not come through and sent mail will say "sending" all day without sending a thing. Like it is perpetually stuck. On both devices this is happening in the same manner no matter what ics rom I use. Both sync fine on gb based roms though. Does anyone have any insight to this issue ?
I have tried rebooting, disabling sync, re-enabling sync, clearing Gmail cache and data. Nothing is working so it seems that this is either a software bug with gmail/ICS or a server bug.
Let me know if you need more information.
Operating system: Android ICS 4.0.3/4.0.4
Phones: Vibrant 3G and LG G2x (both are having the same issue)
Network: Simple Mobile (yes APNs are correct, have checked and tried all known settings.)
I'm not experiencing this one myself but the first thing I would check on my phone would be firewalls. I can set each applications permissions to work with just wifi, or just wireless, both, or completely lock it down.
Just a thought, hope you find the problem.
you need to check your APN settings be advise you must not delete the t-mobile apn google apn settings for your carrier
Try wiping dalvik, wipe cache, reinstall gapps and fix permissions. This occasionally happens to me, but that always fixes it for me
Be sure that your are NOT navigating through a wap proxy. In that case, the push mail feature of gmail won't be able to reach you.
Usually your mobile network provider will give you a bunch of APNs (WAP, MMS, WEB/Internet/Streaming).
Be sure you have the internet one and set it as default! That will solve the issue.
Thanks but I have sold my g2x and vibrant. ICS works great now. Btw what is supl in apn?
Sent from my SAMSUNG-SGH-I777 using XDA App
tureland said:
Be sure that your are NOT navigating through a wap proxy. In that case, the push mail feature of gmail won't be able to reach you.
Usually your mobile network provider will give you a bunch of APNs (WAP, MMS, WEB/Internet/Streaming).
Be sure you have the internet one and set it as default! That will solve the issue.
Click to expand...
Click to collapse
This was my problem too. Thanks tureland!
tureland said:
Be sure that your are NOT navigating through a wap proxy. In that case, the push mail feature of gmail won't be able to reach you.
Usually your mobile network provider will give you a bunch of APNs (WAP, MMS, WEB/Internet/Streaming).
Be sure you have the internet one and set it as default! That will solve the issue.
Click to expand...
Click to collapse
Thanks heaps.
I had this problem. The default was set to WAP, I changed it to Internet.