Related
I am using Touch HD (BlackStone), I installed one of the hot fix from HTC and it seems causing my phone lock up with the ICR program. I did hard reset and reinstall the ICR and it still crashing all the time. I spended 2 days playing around with countless hard reset and the problem was still there. Finally I flashed my ROM and the problem seem gone now. Seems like the hot fix replaced some of the system files and the hard reset didn't restored them.
I just wondering what exactly hard reset does? Does it just delete the extra files and settings installed by users without restoring all the system files?
a hard reset restore all files of your phone (delete all contacts, messages, settings, programs....) to original parameters.
It's like a "fomat c:" for a computer !
So when I flash the ROM image into the phone, it will put it in a protected area in the flash ROM and hard reset will copy all the files from there to another portion of the flash ROM and execute from there?
when you flash a rom, it erase (or replace, it's the same) the 'older' rom !
a hard reset just delete all files ! if you hard reset your phone, it will be like you buy it, when you power on your phone at the first time !
there is no multi-partitions, one and only one OS can be flash, install and run at the same time !
I hope it's clear, and I answer your question, because my english is very bad....
Hey, if you try format c: ,you get rid of ALL datas on your disk, including OS !! So, it´s not like hard-reset Hard-reseting deletes all user-made data, but it doesn´t do anything with ROM/firmware files, so if you changed them, you can get them back only by reinstalling OS ;-)
vitavirgl said:
Hey, if you try format c: ,you get rid of ALL datas on your disk, including OS !! So, it´s not like hard-reset Hard-reseting deletes all user-made data, but it doesn´t do anything with ROM/firmware files, so if you changed them, you can get them back only by reinstalling OS ;-)
Click to expand...
Click to collapse
Ah that explain why hard reset didn't fix my problems but re-flash the same ROM into phone did.
So there is a list of files in ROM to tell the hard reset program which are needed to keep?
thanks
sorry, it's to hard for me to explain what I think in english
sorry for my question but wanted to know if anyone can help, 7 days ago bought a acer stream, I made the root and then exploring delete files by mistake apk system, of course, many things do not work now. If anyone can help they would appreciate a lot. Thanks.
You're pretty much out of luck. If you deleted the files 7 days ago, they are likely un-recoverable. If they are on the sd card, and less than a day or so, you have a chance to recover them using GetDataBack.
Your best bet is to do a factory reset to get all the files back.
dead
remove them from the system and are apk files, there is no method to revive my acer?, it means that I throw it, only serves, I can not load a new rom?
juanreboiras said:
remove them from the system and are apk files, there is no method to revive my acer?, it means that I throw it, only serves, I can not load a new rom?
Click to expand...
Click to collapse
grab this dump and extract the files you need and put them back where they belong
http://forum.xda-developers.com/showthread.php?t=691464
thanks
these are the files I needed but when I try to run with the browser gets me close to applied force and will not let me run it. There is some solution to this?
Factory reset the phone. If you cant do it via settings, try recovery menu.
all
I tried to start from the menu, I did restart buttons and no screen goes black and does not reset to factory settings with some other idea?
**** USE AT YOUR OWN RISK ****
The following is posted so that I may share what I've done. It was done by me and for me. If you use it for you, then you take responsibility for whatever happens. This could, potentially, cause problems. It certainly will void your warranty (though it's pretty easy to undo this with no obvious signs.)
Install ClockworkMod Recovery and roots your P6210 tablet.
DO NOT ATTEMPT TO RESTORE ANY CWM BACKUP MADE WITH ANY OTHER VERSION/REVISION. IT WILL BREAK THINGS. THIS VERSION IS NOT BACKWARDS COMPATIBLE. JUST START WITH FRESH BACKUPS AND BE HAPPY.
WHAT THIS DOES:
Installed from recovery, this .zip will first ensure that it's running on the Samsung GT-P6210. If you have a different model, don't waste your time downloading it. It won't work. I have a P6210 to test with. I don't have any other 7 plus tab, so I can't test any other 7 plus tab, and therefore won't even act like it might work. If you want to try it anyway, you should have the knowledge to repair whatever you break - in which case you'll also have the knowledge to unpack this zip file and do things the manual way.
(starting with 20111210, a backup of the recovery is no longer made. I feel this is no longer needed as there is a confirmed working ODIN package people can use to restore their tablets with.)
Next, a new version of the clockwork mod recovery is installed.
(starting with 20111210, old backups are no longer purged. If you are upgrading from my original CWM recovery (previous to Dec 9th), please manually delete old clockwork recovery backups, as they are NOT VALID and will destroy your normal boot operation if you attempt to restore with a proper/current version of this recovery.)
Finally, the tab will be rooted. This only involves copying a tiny file (called 'su') to the system. In order for most android apps to make use of that, however, another application must be first installed. (See "Finishing SuperUser installation" below.) I considered putting that "SuperUser" application as part of this package, but it's really very easy to get it from the market.
INSTRUCTIONS:
Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, you won't be able to install this. MicroSD cards are cheap. If you have a tablet that costs 399 USD, you can afford to spend a few extra dollars/euros/pesos/whatever on a microSD card. Just get one. Not only is it required for installing this from the factory recovery, but it makes a great place to back things up to. A nice 16GB card is suggested. 32GB is better. You'll need AT LEAST 1GB for this recovery. If you have a previous version of CWM already in-place, you won't need the storage card.
You can download the .zip file directly to your tablet and then possibly use the built in "My files" applet to move it to extStorages/SdCard, or you could download it to your computer and use "adb" to push the file to /mnt/sdcard/extStorages/SdCard, or you should be able to get it there with "Kies." If you have the proper adapter, you could also attach the microSD card directly to your computer and just copy it there. It doesn't matter HOW you get it on the card, as long as it's on the card.
After the zip file is on your microSD card, and the microSD card is inside (and recognized by) your tablet, then you need to...
Boot into recovery mode.
If the recovery version banner is "CWM-based Recovery v5.x.x.x", then you already have a version of CWM installed and should skip ahead to the proper section. If the banner is "Android system recovery (3e)", then you have the factory recovery and should continue with...
Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"
---------------------------------------------
Installing from CWM-based Recovery
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "Install zip from sdcard"
2. Select "choose zip from internal sdcard" (which will actually point to the external card.) (If you are upgrading and chose not to put the .zip on the external microSD card, you might need to select "choose zip from sdcard" instead.)
3. Select the file you placed on your storage card (starts with "p6210_CWMR".)
4. Select "Yes - Install (whatever filename you selected)"
5. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
6. Select "+++++ Go Back +++++"
7. Select "reboot system now."
---------------------------------------------
Finishing SuperUser installation
Install the SuperUser application directly from the android market:
https://market.android.com/details?id=com.noshufou.android.su
....
Post-installation Notes and Issues
It's a known issue with the version of CWM used in this recovery that the "internal sdcard" actually references the built in storage on the tablet. So, if you want to back up to your microSD card, choose "backup to internal sdcard". I'm retaining this issue to stay "compatible" with other CWM recoveries of the same version number. (won't fix)
The .zip package displays an incorrect version identifier/date when version 20111209 is being installed. (It's shows a banner with the date of 06-Dec) (cosmetic)
This recovery is NOT compatible with firmware updates via Kies (and perhaps not via other samsung official methods.) In order to perform a firmware update, I suggest the following procedure: First, perform a CWM Recovery backup, then use the ODIN package found elsewhere to restore this tablet to a factory state. Let Kies upgrade the tablet to whatever version it wants (give it a few tries in case multiple upgrades are needed.) Then re-install this recovery, and perform an "advanced restore" (or "advanced restore from internal sdcard if you made the backup using the similar option.) From there, restore "data." That will leave the entire firmware update in place. (boot is the normal boot kernel; system is what people like to call a ROM here, but is the samsung pre-installed apps; and data contains the applications you install and all your data.) Then "go back", wipe the cache partition, advanced, and wipe the dalvik partition. HOWEVER, please note that I have no way to know if any given samsung firmware update is "compatible" with this restore unless I've tried it myself. It's compatible with everything released up to the date of this note (10-Dec-2011), but I can't predict the future.
Donation?
I don't take donations. If you have spare money (I don't), please donate it to the Salvation Army, Red Cross, or just find a homeless person on the street and give them something. My favorite charity is the Shriner's Hospital for Children. (yes, I am.) If you'd like to thank me, there's a button at the bottom of this post dedicated to that. If you don't want to thank me, that's okay too.
Changes for 20120107:
Brought the recovery kernel up to date with the normal boot kernel. The only impact should be that if you keep crashing any time you boot normally (and before you are able to perform any action), you can now boot into recovery to _hopefully_ be able to retrieve the /proc/last_kmsg as a diagnostic tool.
Reduced the size of the .zip quite a bit.
Changes for 20111210:
* A backup of the existing recovery image is no longer being made. I feel this is no longer needed, as an ODIN package is now confirmed to be working that people can use to restore their tablets to a factory state.
* Old clockworkmod recovery backups are no longer being deleted when installing this. If you are installing this or newer from my CWM recovery previous to Dec 9th, 2011, please manually delete all those old backups. If you attempt to restore them, please be prepared to download ODIN and a factory ODIN image, as you'll need it in order to get your tablet working again. You've been warned...
* The issue that was causing backups to the tablet's built-in storage to fail has been corrected.
Changes for 20111209:
* Issues with getting into recovery are resolved.
* a backup of the recovery is only made if there is no sign of a previous version of this same recovery in place
Credits
Most obviously, Koush for his wonderful clockworkmod recovery. It's the basis of this entire project. Entropy512 for pointing me in the proper direction on a couple of things, pershoot mods to CWM for the Galaxy Tab 10.1 that I ported over to this one (due to the different partition structure of honeycomb devices.)
Links are below...
Take care
Gary
thanks gary, how might we be able to tell if this will be kosher with 3g version? do we need to --dump all pit via heimdall to ensure all partitions match up,etc? Thank you for your speedy work.
chrisrotolo said:
thanks gary, how might we be able to tell if this will be kosher with 3g version? do we need to --dump all pit via heimdall to ensure all partitions match up,etc? Thank you for your speedy work.
Click to expand...
Click to collapse
It's not kosher at all. I didn't wash my hands before compiling it, and had bacon bits on my salad for lunch. Sorry.
Thanks Gary. I have been watching your progress for about a week and you are like a put-bull. Amazing. u da man!!!
Pit bulls would be shamed as wussies. Many great devs possibly have a touch of Asperger's syndrome (with MUCH better socialization skills!) which, with tasks like this, is a benefit! At the very least just plain tenacious! lol
Thanks Gary. I've learned a lot just following along reading the discourse between you and others like Entropy. Appreciate it.
garyd9 said:
It's not kosher at all. I didn't wash my hands before compiling it, and had bacon bits on my salad for lunch. Sorry.
Click to expand...
Click to collapse
ahhh , close enough. anyways what could we do to find out without actually flashing this to possible incorrect partition??
chrisrotolo said:
ahhh , close enough. anyways what could we do to find out without actually flashing this to possible incorrect partition??
Click to expand...
Click to collapse
Which "3g" model do you have? The tmobile one or the international one?
I'm trying to narrow down which is the GT-P6200 and which is the SGH-T869!
I'm working with someone via PM and email to get the information needed for the SGH-T869, and I think it'll be pretty easy to get a recovery together for it, but other people will have to test and validate. I think this is the tmobile version...
international p6200
Soft Brick(kinda Sorta - well not really). Using defult 3e recovery. Tab would boot up, but would not go into recovery at all. Nada Nada. Thought it might have been some leftovers from other stuff I have been trying, so I odin3'd the factory image, did a wipe all and tried it again. Same difference. The only thing I could really think of was maybe I had a corrupted download.
funny thing is that it would boot up into the OS. Just not into recovery. will keep trying as I really want a way to make nandroid backups.
otamctech said:
Tab would boot up, but would not go into recovery at all.
Click to expand...
Click to collapse
No need to ODIN... that's why the package creates that backup recovery image. However, you said it's booting normally, correct? If so, it's not broken or bricked (and I experience the exact same thing.)
For some odd reason (that I haven't been able to figure out), after I flash a non-stock recovery, its very difficult to get the tab into recovery mode. Some times I get it instantly, and some times I have to try several times in a row. Are you using adb? If so, it might be easier. Power off the tab, plug it into your computer, and eventually the tab goes into a "low power mode" where you see the battery gauge but nothing else. From there (again, assuming you have adb installed/working), you can just run "adb reboot recovery" That usually gets me into recovery. 90% of the time.
If not, just try again. If you see the samsung animation starting, press/hold the power button to turn it off again, then press/hold volume up again... etc. It's a PITA, and a major annoyance of mine.
Two things about it make it REALLY annoying for me. First, I'm using samsung's own kernel for this... but I'm just repacking the initramfs portion of it. Second, if you put the factory recovery back, it's easy to get into recovery again.
chrisrotolo said:
international p6200
Click to expand...
Click to collapse
I'll get to that one eventually. I'm commited to do the tmobile one next, and I REALLY need to concentrate on my full-time job (the one that pays me a salary) which only leaves me a couple hours each day.
take care
Gary
absoultely, take your time. Is there a certain battery percentage requirement to get into either stock or CWM recovery say 50% or 60% minimum? we had this issue on dell streak 7. Let me know if I can help with partition layout or anything for p6200. thanks.
chrisrotolo said:
absoultely, take your time. Is there a certain battery percentage requirement to get into either stock or CWM recovery say 50% or 60% minimum? we had this issue on dell streak 7. Let me know if I can help with partition layout or anything for p6200. thanks.
Click to expand...
Click to collapse
No hard requirement I'm sure - but flashing at below 50% is just a stupid reckless risk, plain and simple as that.
If you are having issues getting into recovery after flashing this...
Here's a procedure I've come up with that has allowed me to get into this recovery 9 out of 10 attempts (and it doesn't require any special connections to a computer.) Please read all the steps before starting so you're prepared for what comes next. It'd really be annoying to have recovery finally pop up, but you weren't paying attention so the tablet turned off.
power off the tablet
Throughout this entire process the volume UP switch should be held and not released. This is the side of the volume switch closest to the power button. Once you see your recovery screen, you can release the volume switch (and any other button you might be holding at that time.)
Press/hold Volume Up (constant)
Press the power button, hold it down for 2-3 seconds, and release it.
You'll see the Samsung logo screen for a few seconds...
Instead of the expected recovery screen, you might see the samsung boot animation with music. If so, immediately (without releasing volume up), press and hold (and keep holding) the power button. Don't let it go this time.
The tablet will appear to power off after holding the power button for a few seconds, and then will power back on a second or two later.
(you're still holding that power button, right? how about volume up? Good.) Again, you'll see the samsung logo screen for a few seconds...
Instead of the boot animation, recovery should pop up this time. Release the power button as soon as it does or you'll just turn the tab back off again. You should also release the volume UP at this point.
(If you've flashed my recovery, please try this. If it doesn't work, please take the effort to reply to this post so I can know what people other than myself are experiencing.)
Take care
Gary
updated OP with:
Post-installation Notes and Issues
I'm aware that after flashing this, it is difficult to get back into recovery. I'm not sure WHY, but it's fairly consistantly a pain in the rear. However, I have found that following the steps in the following post seems to work (at least for me) 9 out of 10 times. (I was distracted on the 10th try, so not sure if it worked or not): http://forum.xda-developers.com/show...6&postcount=14
Remember above I mentioned that when this package installs, it creates a backup of the old recovery? Well, it does that no matter what recovery was in place. So, if you install this package with a factory recovery, that backup will be of the factory recovery (which is probably what you want.) If you install this package a second time when you already have the CWM Recovery installed, you'll overwrite that factory recovery backup with a backup of the CWM recovery (which makes no sense.) I'd strongly suggest that after you FIRST install this package, you make a copy of that backup recovery image file (and full filename is displayed when it's created), and stick that copy someplace safe. Perhaps just rename it and copy it to your SDcard or computer. A good name might be "p6210_factory_recovery.img"
The Tab 10.1 could be difficult to get into recovery too.
Usually, the following works for me:
Press and hold VolUp
Press and hold Power until the screen turns on (this is slightly different from your instructions)
Release Power but keep holding VolUp until Recovery shows
__________________
somebody9 said:
I was wondering if anyone knows what needs to be deleted in order to get rid of that pesky pop up menu you get by pressing on the Chevron/Arrow in the middle of the bar.
Click to expand...
Click to collapse
Please start a new thread for a new topic. Try to keep this one isolated to the CWM recovery.
garyd9 said:
Please start a new thread for a new topic. Try to keep this one isolated to the CWM recovery.
Click to expand...
Click to collapse
Sorry about that. Post removed.
Garys method of booting into recovery works fine. I'm just going to post it in linear format.
1. Press the power button and select Power Off
2. Press the volume up button (closest to power button) and do not release until the recovery screen is displayed
3. Press (do not hold) the power button
4. The static Galaxy 7.0 Tab Plus screen will display (possibly twice)
5. When the animated Samsung screen displays, press and hold the power button
6. The static Galaxy 7.0 Tab Plus screen will display
7. Release all buttons when the recovery screen displays.
This works every time for me
To whom ever can help out, I have a Galaxy Tab 2 7.0, and cannot seem to get my problem resolved by myself. I have somehow inadvertently managed to install an update.zip that had or had no relations to this particular OS of this particular model of android.
My problem is that I wanted to be able to, migrate my apps to the external SdCard or extSdCard, and I think I used an update.zip designed for the cellphone HTC Evo 4g. Not realizing that I will be later unable to use the restore feature from a previous backup I had made using CWM 6.0.1.0 to recover from my inadvertent mistake (not to comfortable making a backup, and thinking I can restore properly anymore, like I can on my cellphone that I am spoiled with).
Silly of me to think I could use an update.zip designed for another type of device such as the HTC Evo 4g, but… (anyway my bad what was I thinking…?). The update.zip, by the way is "dtapps2sd-2.7.5.2-signed", like I mentioned this is clearly designed for the HTC Evo 4g, and not for the Samsung GT2 7.0.
The problem I experience now is not complete lose of my GT2 7.0 device I can still install and change out OS through the CWM-Recovery and install apps through the Android Market. I do however experience the inability to check my Storage properties under my Settings profile. When I attempt to click on this link it pauses for a second as if it wants to open up and perform its normal function, then reports an error "Unfortunately, Settings has stopped". Now at this point this is where I would have to mention another issue similar to this one, and that is at startup. When I first start the device up and it runs through its process of startup configuration. It will then report a list of programs that are prevented from running properly it as follows;
Unfortunately, the process android.process.media has stopped.
Unfortunately, My Files has stopped.
Unfortunately, Factory Test has stopped.
Unfortunately, MTP has stopped.
Now my question is, how is-it possible to resolve this issue. I have tried to complete a fresh install of the OS, CWM-Recovery, and also attempted to wipe everything possible that the recovery will allow, but I am not expecting much, as I cannot even get the backup and restore feature to work efficiently enough to provide me with what I need it to do…
I have provided this post with a download of the update.zip I used as well as the version of the OS I have provided my Samsung GT2 7.0. If anyone can shine some insight on what direction I should attempt to do to resolve this issue I would be more that interested to take a look at what I could use to correct this error of mine…
-Samsung GT2 7.0 - OS (Use the Download link above the Rosewell signature)
http://forum.xda-developers.com/showthread.php?t=1784318
-dtapps2sd-2.7.5.2-signed
http://www.mediafire.com/?7jpc5oudzt6o76p
I might be comfortable to ADB Shell into my device to make changes, or if one was able provide me an update.zip/script that would be great. Also is there a better recovery out there than the ClockWorkRecovery.
Better recovery so you may try twrp or so
Try install a fresh firmware preferably with a pit file from odin pc
Sent from my GT-I9300 using xda app-developers app
Mohamedselim said:
Better recovery so you may try twrp or so
Try install a fresh firmware preferably with a pit file from odin pc
Click to expand...
Click to collapse
Mohamedselim, Thanks...
Will look into this..., any links by the way in regards to the "fresh firmware with a pit file"...?
Have you tried downloading and flashing a full Odin tar file to restore your device to stock?
imnuts said:
Have you tried downloading and flashing a full Odin tar file to restore your device to stock?
Click to expand...
Click to collapse
Yeap...!, I have tried this already, have had no promising results...
This is the only compatible version of a .pit file...;
http://forum.xda-developers.com/showthread.php?t=1642744
Can anyone provide me another one for the GT-p3113...?
Just checking in..., and wondering if anyone has a solution for this...?
Factory reset in stock recovery. So Odin a stock Rom and before u install anything custom, do a factory reset in recovery after u Odin back to stock. Then flash away.
I imagine you have alrdy tried a factory reset using a custom recovery.
WAIT!!! You don't have to factory reset, just reboot into CWM recovery ang go to mounts and storage>wipe internal storage. Confirm and reboot. You will lose anything on the sdcard but your apps will stay.
RomsWell said:
Factory reset in stock recovery. So Odin a stock Rom and before u install anything custom, do a factory reset in recovery after u Odin back to stock. Then flash away.
I imagine you have alrdy tried a factory reset using a custom recovery.
Click to expand...
Click to collapse
MultipleMonomials said:
WAIT!!! You don't have to factory reset, just reboot into CWM recovery ang go to mounts and storage>wipe internal storage. Confirm and reboot. You will lose anything on the sdcard but your apps will stay.
Click to expand...
Click to collapse
1. I am all over the Factory resets, and wipes.
2. Already tried Stock Rom(s).
3. I believe my problem is a bootloader, or partitioning script. (As this denies me access from inside settings>storage where I can view my allocated size, and Restore to Factory button. In addition in CWM, I am not allowed to mount/sdcard(internal), extSdCard is ok though. Also, I cannot plug Tab via USB to check contains on Internal or External sdcard, but I can remove the External to transfer data from it via sdcard slot on PC...)
Maybe you can recommend a good Stock Rom, so I can give that ago...
I was in the process last night, and could not get a good connection with Heimdall or Odin. I am now looking into driver issues, so...
Ok, so I was successful in taking RomsWell and MultipleMonomials advice, and was able to return my device back to "Normal" state, including "Stock Recovery". But I still have the original problem as in my request I asked in my first post...
I do however experience the inability to check my Storage properties under my Settings profile. When I attempt to click on this link it pauses for a second as if it wants to open up and perform its normal function, then reports an error "Unfortunately, Settings has stopped". Now at this point this is where I would have to mention another issue similar to this one, and that is at startup. When I first start the device up and it runs through its process of startup configuration. It will then report a list of programs that are prevented from running properly it as follows;
Unfortunately, the process android.process.media has stopped.
Unfortunately, My Files has stopped.
Unfortunately, Factory Test has stopped.
Unfortunately, MTP has stopped.
Click to expand...
Click to collapse
I think now, if I cannot get a sizable remedy..., is just to try and send it in Samsung so they can take a look at it...
Any suggestions...?
FYI; I have also tried connecting to Kies, but due to the inability to posses a "MTP" (Media Transfer Protocol), is the reason I cannot connect to my SdCard & extSdCard. I can "PTP" (Picture Transfer Protocol) into it, using "adb shell", but not using "MTP"...
So I do not know how much "MTP" has to do with this relationship of the other three items that I mentioned in my bullet list in my quote, but...
Anyway, I don't know what I am trying to say, but thank you two, for getting me this far...!
grassy-sneakers said:
1. I am all over the Factory resets, and wipes.
2. Already tried Stock Rom(s).
3. I believe my problem is a bootloader, or partitioning script. (As this denies me access from inside settings>storage where I can view my allocated size, and Restore to Factory button. In addition in CWM, I am not allowed to mount/sdcard(internal), extSdCard is ok though. Also, I cannot plug Tab via USB to check contains on Internal or External sdcard, but I can remove the External to transfer data from it via sdcard slot on PC...)
Maybe you can recommend a good Stock Rom, so I can give that ago...
I was in the process last night, and could not get a good connection with Heimdall or Odin. I am now looking into driver issues, so...
Click to expand...
Click to collapse
Did you try formatting internal storage in CWM?
MultipleMonomials said:
Did you try formatting internal storage in CWM?
Click to expand...
Click to collapse
I am not quite confident on how much this will work. As I have tried this multiple times to wipe "Wipe Factory/Data", "Wipe Cache", including all the partitions under the "Advance" section found in CWM Recovery. Even using TWRP Recovery.
Per this post; I just attempted to flash a "Stock Rom", but not before doing a factory/data, cache wipe using "Stock Recovery", including after a successful install...
No luck, the same problem still exist as above...
Ok, this was all just the rudest experience I put my self threw. As I have an HTC Evo 4g - cellphone and have become comfortable with installing ROM's, Kernels, and Updates.zips, as well as, other modification. All threw the Recovery designed for this particular device, and don't get me wrong there has been a couple of times. Maybe more than a couple, more like a few times I have installed incompatible downloads I find in the XDA forums. Which makes this screw up, difficult form me to know that as long as you can get into a Download/Bootloader or a modified Recovery designed for a particular device that was successful flashed correctly. Well the screw up are easily redeemed/recoverable.
So, to make a long story short. After having called Samsung Customer Care (the 1-800-SAMSUNG) number, it seems to have been a External SdCard getting in my way from having been real short from sending my Tab off to the repair department (where ever it is...). I in fact already had it in an envelope, all I needed was an address to send it to. Anyway the nice person on the other side of the phone requested that I remove my External SdCard, and confirm that I was able to get into my "Storage" tab under my settings. Well after success getting this option back, I then made the suggestion that maybe my Eternal SdCard is corrupt or incorrectly formatted. She then agreed maybe this is the case. After ending the phone call. I quickly restarted my Tab, again only to find out that I was no longer receiving the error messages like mentioned above, which is great, because after multiple flashes of "Stock Roms w/Stock Recovery", and forcing myself to believe that it was a system install error. It in fact the External SdCard in place preventing me from throwing my Tab against the wall / in the mail to Samsung Repair Center...
"Man what an ordeal...!!!"
Thanks to all that helped with the suggestions, as to what direction I most defiantly tried.
I am now in the process, since I am living back in Stock mode. To receive an OTA (Over The Air) Update, and am still in the process of seeing if this thing still possess any residual silent errors...
I will keep you posted.
If not, well it off to happy rooting for me...!!!
That is it, my problem is resolved. Damnedest thing this problem of mine, it seems the only thing I screwed up was the micro SdCard. to the point it was the cause of all the error I received when I started up the device, as well as when I attempted to access my storage through me settings options...!!!
Now re-rooted, and a happy camper, Cheers...!
Most of the time when one flashes a new ROM one has to do a data wipe (factory reset), and it erases all one's personal files like movies, music, pictures etc, quite annoying to say the least.
I found a way to avoid this, and it's pretty simple:
1-in CWM go to mount,
2-mount both data and system,
3-format them both.
This will perform the factory reset without erasing our precious files (the installed apks will be gone though, but no biggie if you backed up them with Titanium).
Then you can wipe cache + dalvik and flash your new ROM.
I used this method to go from ICS to CM 10.1, from CM 10.1 to Paranoid Android, and finally back to ICS, without loosing a single kb of my files.
Edit:
I have a p6210, no idea whether it works on other models or not. I guess it does but who knows...
Give it a try if you feel like it, but don't forget to make a back up before in case it goes wrong.
After flashing, your files won't be in the mnt/sdcard anymore but in a newly created folder in mnt/sdcard/0, or, depending the rom you are using, in storage/sdcard/0.
Or, some roms may create a file called legacy and stock everything there, or sometimes your files may be stocked before the sdcard folder, search for either /0 or /legacy.
Use a root browser and have a look, your files are still in your device (have a look as well at your storage in general settings, it will show how many gbs are in your tab).
Once you have found your files all what you have to do is to move them back where they belong, ie the /sdcard folder, it takes 10 seconds.
unclefab said:
Most of the time when one flashes a new ROM one has to do a data wipe (factory reset), and it erases all one's personal files like music, pictures etc, quite annoying to say the least.
I found a way to avoid this, and it's pretty simple:
1-in CWM go to mount,
2-mount both data and system,
3-format them both.
This will perform the factory reset without erasing our precious files.
Then you can wipe cache + dalvik and flash your new ROM.
I used this method to go from ICS to CM 10.1, from CM 10.1 to Paranoid Android, and finally back to ICS, without loosing a single kb of my files.
Give it a try if you feel like it...
Click to expand...
Click to collapse
Not cool man.Fu** lah.I lost everything.Around 7 GB of files.Fu** lah.I have no backup.I thought it would work.I was going from cm10.1 to cm10.What am I going to do?
Re: Easy way to keep one's personal data after flasing a new ROM
ALWAYS create a backup before erasing/flashing ANYTHING!! It's always as a precaution, to avoid losing something that you don't want to. And it only takes like 5 seconds literally. I lost some stuff when I unlocked the bootloader on my nexus10 by factory resetting, and I must say I didn't have a smile on my face. But it happened, u live n learn. I'm afraid if u wiped without making a nandroid backup your probably out of luck. Unless your skilled in using forensics techniques to try to recover it. Can't think of any options tho.
Sent from my SCH-I535 using xda app-developers app
Balaram12 said:
Not cool man.Fu** lah.I lost everything.Around 7 GB of files.Fu** lah.I have no backup.I thought it would work.I was going from cm10.1 to cm10.What am I going to do?
Click to expand...
Click to collapse
What did you do?
Did you follow the exact procedure?
I flashed again some roms today and it worked again.
But one thing is that the files are not in the mnt/sdcard anymore but in a newly created folder in mnt/sdcard/0, or, depending the rom you are using, in storage/sdcard/0.
Or, some roms may create a file called legacy and stock everything there, or sometimes your files may be stocked before the sdcard folder, search for either /0 or /legacy.
Use a root browser and have a look, your files are still in your device (have a look as well at your storage in general settings, it will show how many gbs are in your tab).
Once you have found your files all what you have to do is to move them back where they belong, ie the /sdcard folder, it takes 10 seconds.
This said, meishkov is right, one should allways have a back up in case anything goes wrong, I should have mentioned it in the OP but I forgot, my bad...
Edit:
OP edited.
Oh well, noone tried?
Would be nice to hear some reports...
Balaram, it would be fair from you to detail a bit what happened and to tell if you found back your files.
Anyway, this method worked for me and I thought that it might have interested some people here, roms flashers and devs alike, but if that s not the case then no worries.
If someone feels that I should erase the whole thread just tell me and I ll do it...