Database Info

How to install Epic 2.0 by Darkonion.

This guide was written by Darkonion. I have just updated it to work for the newest release. Please give all credit to him.
NOTE: Updated September 12th, 2010. Added additional steps to the process. Reread to reapply the Epic Unleashed 2.0!
Please READ each direction CAREFULLY and BEFORE executing each step. I can not stress how many mistakes are made because someone did not READ the directions carefully. So... yeah, once again, READ THE DIRECTIONS CAREFULLY!
How to Apply EpicUnleashed 2.0
Credits: The ROM was created by Matt4542. Tutorial was written by me with some simple directions from Matt. You'll need to be rooted in order to run the Droid 2 Bootstrapper.
The fine print: Matt4542 and/or I (DarkOnion) can not be held responsible if you mess up. If you mess up, you mess up. That's why I wrote the .sbf recovery tutorial. Matt has also written one. More simple, but requires Linux.
Here we go.
1. Download Koush Bootstrap here.
http://koush.tandtgaming.com//motoro...2Bootstrap.apk
2. Download Unleashed 2.0!
http://matt.kimete.com/screenies/Unleashed2.0-D2.zip
3. Move both files to the base of the SD Card. Best way to do this is to plug your phone into your computer and move it like that. Make sure you phone is in USB mass storage mode. To change it, pull down the notification blind, choose USB connection, and choose USB Mass storage. Now copy and paste the two files to the new removable drive that showed up in your My Computer. The Epic-Unleashed11Deodexed.zip needs to be at the base of the SD card, and not in any folders. After moving all the files over to the phone, change the connection type back to Charge Only. Notfication blind -> USB Connection -> Charge only.
4. Install Koush Droid 2 Bootstrapper. Using an app installer, Astro File Manager, or equivalent, navigate to your SD card. The folder in Astro File Manager will be called sdcard. Choose Droid2Bootstrap.apk and install it. Follow the directions.
5. Now that it is installed, open Droid 2 Bootstrapper located in your applications section menu. It'll probably ask you for Super User access, say yes.
6. Press Bootstrap Recovery. It'll probably ask you for Super User access, say yes.
7. Next, we want to back your system file up by making a system image. In the Droid2 Bootstrapper, which you are already in, choose Reboot Recovery. Your phone should restart and load up into the custom recovery.You should see some green text with various options, and a little lower than the middle of the screen, it says ClockworkMod Recovery.
Notes for navigating through the system. You need to use the keyboard to navigate. "Enter" will select. "Del" will cancel/go back. and the arrows are movement.
8. Using your slide out keyboard, scroll down to backup and restore and press the enter key. It should take you to another window. Choose Backup. Let it runs it's course. After it is all said and done. If it does not bring you back to the main menu after this backup press the power button.
10. Using your keyboard buttons, choose mount and storage. And then choose mount /system. After that, press del to go back to the main menu.
11. Using your keyboard buttons, choose install zip from sdcard.
12. You need to make sure signature verification is off. Choose toggle signature verification and make sure it is off. At the bottom, under ClockworkMod Recovery, it'll say whether or not signature verification is enabled or disabled. You want it to say that it is disabled.
13. Then choose install zip from sdcard. Choose Unleashed2.0-D2.zip. It'll ask to confirm. Scroll down to Yes, and press enter. You'll see some commands going and eventually say it is complete.
14. Now navigate back to the main menu by pressing "Del" on the keyboard. And restart your phone by choosing reboot system now. It'll reboot and that's it! You've installed Unleashed 2.0!
Note: Your first boot will take a little while, up to 10 minutes. PLEASE BE PATIENT.
If you need to undo this thing, boot back up into bootloader using Droid 2 Bootstrapper -> Reboot Recovery -> Back Up and Restore (after the reboot) -> Restore.
If you like this tutorial or any other tutorial, please feel free to show your gratitude by sending me a few bucks my way. I am a poor college student always trying to make ends meet. It's just more than writing a tutorial. Troubleshooting, helping others when they get lost, constant updating and rewording to make the process more simple. All donations are greatly appreciated, no matter the amount. $1 USD is good for two taco's at Jack in the Box! Paypal: [email protected]
And please don't forget about Matt. Send some love his way, too. It takes time create this stuff, not to mention troubleshoot, fix, and update. Make sure you send some love his direction. He needs money for a domain name. Paypal him at: [email protected]
If anyone comes across and problems with instructions, please let me know. I am going to try to keep this thread updated and easy to use.
= = =
How to Root Droid 2
http://forum.xda-developers.com/show...&postcount=164
How to SBF Recovery Droid 2
http://forum.xda-developers.com/showthread.php?t=770224

thanks for this
the link to koush bootstrap is messed up btw
And there's no step 9

Here you go!
http://koush.tandtgaming.com//motorola/droid2/Droid2Bootstrap.apk

Uh... It said it installed and stuff so I rebooted, but it been on the Moto logo for more than 20 minutes now. Is something wrong or should I keep waiting?

kjik said:
Uh... It said it installed and stuff so I rebooted, but it been on the Moto logo for more than 20 minutes now. Is something wrong or should I keep waiting?
Click to expand...
Click to collapse
Pull battery and reboot. Rebootstrap and boot to recovery. You most likely forgot to mount system before flashing.

If for any reason I needed to go back to stock do I just do a recovery?

Yeah. Just boot back up in recovery, choose back up and restore, then backup, and choose a back up. In order to restore to a back up, you would have previously had made a back up.

darkonion said:
Yeah. Just boot back up in recovery, choose back up and restore, then backup, and choose a back up. In order to restore to a back up, you would have previously had made a back up.
Click to expand...
Click to collapse
Thanks! Just wanted to make sure, im all backed up and ready to go. But now I can't decide Epic or Tranquility? Mmmm

Just wondering why wiping isnt suggested...yet/

Coderedpl said:
Just wondering why wiping isnt suggested...yet/
Click to expand...
Click to collapse
No need to

Can someone post a mirror to this rom release, I've been trying to flash 2.5 and its not workin at all... wanna try to flash 2.0 then upgrade.. thnx in advance
Sent from my DROID2 using Tapatalk

Review/ROM Install Guide

Hey all, just wanted to give a quick rundown. I shared this on Slickdeals earlier and someone recommended I throw it over here so that it might help anyone. My Coworker got his gTablet yesterday (from the Woot deal in March) and I had the chance to play with it/flash a custom ROM.
First about the stock ROM. His had angry birds and flash preinstalled, there were some funny directories setup on the internal storage which included a few apps (angry birds and flash amoungst them). I suspect they did some funny business at the factory with our units, but it did not in ~ANY~ way appear to be used/returned etc. The directories I remember were "Master", which I believe had apps and ... Oh hell it's too long now, something else. Anyways it didn't appear to be anything other than new is my point.
Next, the screen. It was definitely a TN panel and did have some odd viewing angles, and while not ideal it was certainly not anything that was preventing one person from enjoying it, vertical or horizontal. It was difficult for others to gather around and see videos well, so if that is a large concern for you then be concerned I suppose.
The stock ROM. It came with 1.1-3381 (or whatever the 33 was). It really does suck. They disable the menu button in most locations with the stock ROM, and it was slow/sluggish just like everyone has been saying.
Now I hope this crash course is of some help to anyone with their new toy. First to check your ROM version, you can go tab the Gears icon at the side of the screen, then choose About in the left menu. In here you'll find the rom version (should be something like 1.1-3389, 1.1-3588 or 1.2-something). Here's what I did to get his updated. Get familiar with XDA, it'll be a great friend and resource.
1.) I loaded the 1.1-3588 stock recovery, an upgrade from the 1.1-3389 recovery. It was possible to do this by going to this page (don't forget to thank Roebeet for putting all of this together), downloading the "3588 Recovery Pack v1.0".
2.) Unzip the 3588 Recovery Pack v1.0 then connect your tablet to your PC and enable USB mode (when you plug it in, you'll need to click the Yellow/Orange circle in the upper-right, then choose to enable USB tethering). Copy the "recovery" folder, and the update.zip to the root (what opens when you double-click the tablet drive) of the tablet internal memory (Probably D: or F: ).
3.) After the files copy to the tablet, turn off USB tethering, then turn off the tablet. You'll be restarting it in Recovery, which will automatically load the new recovery.
4.) To start the tablet in recovery, have the tablet turned off, then press and hold the power button and volume + button. You'll see a small message in the upper-left to indicate that it is starting in recovery. You can release the buttons now.
5.) After the update finishes installing the tablet will automatically reboot to Android once again, with the ugly Tap And Tap interface. This is OK, you're two steps from fixing it.
6.) Turn on USB tethering again, then open the tablet folder and delete the recovery folder and update.zip.
7.) Go back to this page, and once again thank Roebeet, and download "clockworkmod .8 bekit". Once downloaded, unzip it, then copy the recovery and update.zip to the root of the internal memory again. Turn off the tablet.
8.) Start the tablet in Recovery again by holding power button and Volume + at the same time. Once again you'll see a message in the upper-left and you can release. It'll do its thing and reboot to Android when it completes.
9.) After you get into Android again, start USB Tethering then delete the recovery folder and update.zip.
10.) At this point you can load what ROM you want (within limits, BE SURE TO READ THE ROM THREADS FIRST). I installed Vanilla AOSP Gingerbread ROM. Go download the file from that thread, then place it into the root of your tablet internal memory. Be sure to thank kornyone for their work. Also be sure to download the "gapps" available on this page as well, for you will have to install it to have the Android Market, GMail, etc.
11.) To install it, turn off the tablet, reboot into Recovery (Power button & Volume + at the same time..). You'll now be in Clockworkmod, a custom recovery. You can navigate the custom recovery by using the volume rocker to go up and down, the power button to go back a menu, and the Home soft key to press enter.
To properly install a ROM you should always first clear the data/system/cache. It's been a while since I've used clockworkmod, but I believe the option you are looking for is Factory Data Reset, choose Yes on the next screen. Then delete cache just to be sure.
Now you can go to "Install ZIP from sdcard", then "Choose zip" or something akin to it. Navigate to the file you copied, and tell it to install. Wait a short while and you should see that it successfully installed. Now just press the power key a few times to get back to the main menu and then choose to Reboot (whatever the top option is).
Enjoy your Gingerbread Android.
A few app recommendations: I use LauncherPro. It's available in the Android market and it's a "Home" replacement. Try it out, it's smooth and it has a bunch of extra widget if you purchase the program (1.99). Also check out Dolphin Browser HD. The last word of advice I can give is to get familiar with Long Press, it's basically right-click in Android. To do a long press just hold down on an icon or a blank area and see what happens.
A round of thanks go out to Roebeet and kornyone for putting the files used together, and a special thanks for the excellent documentation Roebeet. If I've left anyone out or placed this post in the wrong section please let me know and I'll get it fixed.

newbie question
I load the clockworkmod recovery and nothing changes. How do I get the clockwork mod to work? I already have my gTablet rooted. Now just trying to get to where I can load a custom ROM.
Thanks

apboswell said:
I load the clockworkmod recovery and nothing changes. How do I get the clockwork mod to work? I already have my gTablet rooted. Now just trying to get to where I can load a custom ROM.
Thanks
Click to expand...
Click to collapse
If you have flashed clockwork properly then to power on your device hold the volume up key as press the power button. This will load the recovery kernel and the clockworkmod, from which you can backup your device and install custom roms.

Just wanted to posted a quick update -- Two of the tablets that people at my workplace ordered suffered an odd corruption of the internal memory. The symptoms were random app's force closing, then upon trying to reboot the device it simply boot loops (the OS screen displays, then flips back to Viewsonic -> Load screen, repeat endlessly). Got them booted into recovery and tried to load data to which it reported the data partition could not be loaded due to the block being inaccessible. After a quick search the solution to this problem if you encounter it is:
1.) Boot into clockworkmod .08 by holding the power button and volume + button until you see the Recovery key press detected in upper-left.
2.) Go to advanced using the volume buttons, then press the home key to enter the advanced menu.
3.) In here go to Partition SD Card and select 2048, then 0. Wait a few minutes and the data partition will be ready to go again.
At this point I went ahead and did formatted the following partition through the mount menu: boot, system, data, cache. Afterwards I loaded the ROM again and everything appears to be working well.
Hope this helps anyone else who gets this random error.

Good post! Thanks!
The SD repartitioning is a very common fix here, in XDA. Usually it's what we try if you have weird FC's or file corruption and a re-flash or data wipe doesn't fix things. I've had to do that at least twice on my own device, over the last 3 months or so.
Also, keep in mind that the 3588 Recovery Pack is designed with a rooted ROM in mind (it lets you flip back and forth between clockworkmod and standard recovery via a script that can run off the GTablet or via adb)

[q] help please

Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next

iluuvmochi said:
Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next
Click to expand...
Click to collapse
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps

MEG4LOM4NI4C said:
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps
Click to expand...
Click to collapse
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders

iluuvmochi said:
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders
Click to expand...
Click to collapse
so your not using Clockworkmod Recovery then? just flashing directll to NAND?
---------- Post added at 02:16 AM ---------- Previous post was at 01:59 AM ----------
Most newer roms are compatible only with Clockworkmod Recovery (aka CWM or CWR). u must install this after maglr.
Just went over to the OP for hyperdroid v 3.0.1. thats why in the file u downloaded says: Hyperdroid-CWM-v3.0.0-MAGLDR-CWM-ZIP.
*note the bolded abbreviations... means u need Clockworkmod Recovery for this rom to work... not hard just an extra step that i highly recommend
There are roms that dont require this and a few ways around it as well but its easier to just install CWM. like i mentioned before seems most (all the ones ive used in the past ten months) roms are going this route for CWMods added features and benefits

Heres a little guide i cooked up bout an hour ago in another thread to help
I just posted this in another thread to clear some things up for some guys shortly after my first reply to you....guess ya inspired me in a way, hahaha. you might be more concered with steps 5 through 6 seeing as how you already have MAGLDR installed...... hope this clears up the process for you a bit
............................excerpted from previous post........................................
********BTW i have attached a little template that i use when flashing various roms and storing them on my PC. has task29, HSPL & MAGLDR already in it. all u need to do is go to the xda hd2 master radio thread to grab your appropriate radio and put that into the empty radio file. then find the rom you want to test out and usually the developer will have both rom (obviously) and the appropriate CWM that u should use with it and just put those in their respective empty folders i have in the attached file. that way all the steps below will line up to the files i have attached
OH YEAH, FORGOT... THESE STEPS ARE TO BE DONE AFTER THE INITIAL PREREQUISITES i.e. windows mobile device center, activesync, proper spl version...blah blah blah
--------the following steps 1 - 4 are to be preformed while at the tri-color boot screen (easiest way to reach is to turn off your phone while its connected to your PC then immediately hold volume down button till you see it n wait for it to say usb in the white section).
(by the way your device will ALWAYS automatically restart itself after a couple seconds if it is shut down while plugged in via USB to either a wall/car charger or hooked up to a PC this is normal and a small hiccup either due to the use of magldr or the hspl but dont worry)...cant quite remember
1. run task 29
-double click the only icon in file if your using the one provided by doloop
-wait for it to run and do its thing. when its finished it will automatically turn off your device so be sure to hold down the volume key as soon as it does.
2. install radio
-run the "customRUU" file with the HD2 icon in the radio of your choosing
-it will operate in a similar fashion as the task 29, automatically turning off device upon completion.... down on the vol key
3. install hspl3/hspl4
-run the "HSPL3_PKG/HSPL4_PKG" file. should be the only one in there
-make sure you select 2.08.HSPL in the setup and it will execute itself just like the installers in the previous two steps n turn off your phone... down vol key
4. install magldr113
-make sure your selecting "rom update utility" in the magldr113 file. dont run the "DAF" it wont work properly if you do and youll get errors
-BUT THIS TIME AS IT TURNS ITSELF OFF HOLD DOWN THE POWER BUTTON ON YOUR DEVICE AS IT BOOTS UP UNTIL U GET TO MAGLDR AND CONTINUE TO HOLD IT DOWN UNTIL YOU SEE ABOUT 12 DIFFERENT OPTIONS...
5. install CWM recovery
-go to option 5 "USB Flasher" and hit the green call key. wait a few moments till it shows USB....USB make sure the second usb pops up and your PC recognizes the connection. then when it does sync you get to......
-while still in the usb flasher mode above, simply run you desired CWM recovery which should the one your developer recommends for the builds as the requirements tend to vary from rom to rom.
-this is achieved by selecting the "DAF" file from the clockworkmod recovery your using
-and again this installer will shut off your device upon completion and HOLD DOWN THE POWER KEY LIKE ABOVE TILL YOUR BACK AT THE MAGLDR MAIN MENU (with options 1-12).
6. install rom
-go to option 8 "AD Recovery" and hit the green call button to enter into the CWM recovery u just installed
-after it loads up (GO!GO!GO!) go down to the "mounts and storage" option that is third from the bottom and hit the call key.
-once there go to the last option "mount USB storage" and hit the call key.
-give your PC a few moments to recognize the sd card for your device and choose to open it when your PC prompts with the regular file explorer or just find it and double click on the newly recognized drive (sdcard) if your PC doesnt auto prompt you.
-the new drive (sdcard) should be empty (depending...) then just find the desired rom you chose to use, right click on it and copy.....then over to the new drive (sdcard) and paste. might take a min or two depending on the roms size
-once the copying is complete hit the call button to "unmount" your sdcard then the back button on your device till your back at the CWM main screen
-go to the fifth option down and "install zip from sdcard" and hit the call button
-select the second option "choose zip from sdcard" and select the zip file you just copied to your sdcard. then it will begin to install the rom and all rom install times vary by build. some take a minute, some seem like they take forever.
-once installation is complete hit the back button till your back at CWM main screen and choose the last option which is to "power off"
-then tap the power button(if u unplugged it from usb otherwise it wil reboot by itself) to turn on your device and give it some time for the initial boot and load as it has to set up everything u just installed. subsequent boot wont take as long but again it can all vary from rom to rom.
-after initial load and a successful bootup you should arrive at ether the lockscreen or a startup screen. give the rom a few more mins to settle and dont hit any buttons. then unlock the device or skip through the startup options and get to the home screen. maybe give it another min to settle the launcher and the last bit of data and resist the urge to mess with the features. your gonna hate this but hold down the power button and select power off device from the popup menu. i know it sucks but it is best practice when flashing roms. after device shuts off wait a few seconds and turn it back on and let it reboot. should be faster this time and when u get to your lockscreen simply give it a few seconds to settle again, unlock and go to main launcher a wait a couple more seconds for it to finish settling and.....have fun! (every time i restart my device for any reason i will always give it a few moments to finish loading up before just blazing away with the apps)
WOW! maybe its not so abridged after all, but oh well tried my best to be as clear as possible so people can utilize their HD2 to its fullest potential.
HOPE THIS HELPS AND PLEASE HIT THE THANKS BUTTON IF IT HAS

Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?

Starting HD2 ANDROID SO FRESH N SO CLEAN!
iluuvmochi said:
Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?
Click to expand...
Click to collapse
well what the task29 does is pretty much whipe your whole devices NAND (internal) memory. it wont wipe your radio or the HSPL. it takes care of wiping the rest of the space (MAGLDR and CWM).
so your options are as follows:
-try fix permissions trough CWM
-wiping davlik cache (helps clean up issues with apps n such possibly your market situation, but this could be largely due to the type of rom your using as well as none are perfect...some are really close)
or start fresh to minimize chances for errors and force closes
do this by restarting your device into CWM
-in CWM execute the following commands in the following order (this is a little overkill but better safe than sorry i suppose).
at main CWM screen
-wipe data/factory reset
-wipe cache partition
then at main CWM screen go under "mounts and storage"
-format /boot
-format /cache
-format /data
-format /sdcard
-format /system
-format /sd-ext (only if u made one)
then back at main CWM go under "advance"
-wipe davlik cache
-can also find fix permissions here if needed i personally havent used this much(but maybe i should be every once n awhile...might be good practice)
at this point your ready to start at step one in my guide two posts up....run task29 at tri-color boot screen and so on and so on
*********Please note that the use of CWM is essential for most current builds that utilize a rom-zip format. not sure about sd card builds as i havent used them. i came into the hd2 flashing game right when they got it to run solely out of NAND. just seemed like a better way to do it to me but i could be wrong
hope this helps and lemme know if everything worked out for you. also include the rom you are attempting to install for further assistance. and also corrections are always welcome as i am definitely no developer just have a knack for nerdy stuff (sometimes)

Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!

iluuvmochi said:
Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!
Click to expand...
Click to collapse
Hmmmm where to start....
You were in CWM when u copied the rom to the phone... remember? to get there turn off device then restart it while holding down the power button to get you to MAGLDR. Option 9. AD Recovery = ClockworkMod Recovery (aka CWM or CWR) in there is where u use my little wipe/fresh install guide
The version of Hyperdroid your using is from a months ago. Pongster has released v.3.0.0 "the insightful impala" with a hotfix to version 3.0.1. I would recommend using that as most of your market issues will be addressed i would imagine.
i attatched a file in my previous post... download it. it comes with the task29(provided by doloop), HSPL3, and MAGLDR113 that i use. the lil guide i posted follows how i have the files in the "HD2 rom template" arranged. if you unzip the attached file (use 7zip,winrar....etc) youll see files labeled 1-6 (1.task29 2.radio 3.HSPL 4.MAGLDR 5.CWM 6.ROM). the radio file is empty because i was unable to compress it enough to include it( there is a 8mb attachment limit ) The CWM file and rom file are blank as well because both will vary from build to build.
if u use my attachment as a kind of template it will make the steps easier to go thru thats why they are numbered
to get the appropriate radio on xda type a search for "radio master thread" and open the post. there you will see a bunch of different radios. BE CAREFUL SOME MIGHT BRICK YOUR DEVICE!!! read the post it explains which ones not to use i believe. the one i use and have noticed a lot of others use is 2.15.50.14.... has always worked for me. download it and put it in the empty radio file in my template.
now go back to Pongsters hyperdroid cm7 OP and download both the version 3.0.0 and also download the v3.0.1 hotfix and put both of the zip files in the empty rom folder.
in Pongsters second post he has the CWM for you that youll need if you already dont have it (its on step three of his little guide on his second post) download and put that in the empty CWM file in the template.
now that you have all the files you need and in a nice tidy order.... reflash time!!!!
follow my "fresh install/wipe/format procedure" in my previous post then use my install guide post afew posts up and follow it using the lil template i provided and that u put the radio,CWM,rom & hotfix into
notice how the 1-6 steps in my install guide follow the 1-6 on my "HD2 rom template" attachment?
******oh yeah when u get to the installing the rom step only install the v3.0.0 zip via CWM first and follow the recommended new rom startup section at the end of my lil guide. make sure the rom has had plenty of time to settle and everything like it says n go ahead and play around with it a little and try it out. but then after u rebooted it a couple times like it says reboot it a third time into CWM and go to the install zip from sdcard option and go in and install the hotfix(sorry i tend to repeat myself sometimes)
lemme know how it goes and have u tride Tyweens rom??? Its pretty good itself in case your not crazy about the Hyperdroids' minimalistic and monocrome look. Both are great though.....
---------- Post added at 01:36 PM ---------- Previous post was at 01:31 PM ----------
oh yeah go to www.android.hd2roms.com for a site i use that someone made that kinda keeps track of most of the HD2 roms floating around on xda. its pretty acurate and gets updated constantly. help u see most of the flavors of android on the HD2.

YEY!
YEEEEEEEEY! IT WORKED! you are AWESOME! thank you so so so so so much! if it wasn't for your guidance i wouldn't be able to understand it! i did all the stuff you told me and it worked! i didn't have any problems while flashing my phone! did i say thank you already? THANK YOU!!!!!
and thank you for all the links that you suggested it was really helpful! thank you thank you thank you!!

[SGH-T869][CWMRecovery][ROOT]ClockworkMod Recovery and Root (T869 only) (14-Dec-2011)

Updated 14-Dec-2011: I'm posting an updated recovery, "20111213" (I compiled it yesterday) below. I'm not going to bother cleaning up this entire post with updated information, as I'm just too tired right now. Please read the post, then read the "Changes" section towards the bottom... then download the update (if you want.) Probably this weekend some time, I'm going to be consolidating the posts for all 3 models of this device into a single post with three download links. (I'm trying to get them all in sync with each other.)
**** USE AT YOUR OWN RISK ****
The following is posted so that I may share what I've done. It was done by me and for me. If you use it for you, then you take responsibility for whatever happens. This could, potentially, cause problems. It certainly will void your warranty (though it's pretty easy to undo this with no obvious signs.)
Install ClockworkMod Recovery and roots your T869 (tmobile galaxy tab 7 plus) tablet.
WHAT THIS DOES:
Installed from recovery, this .zip will first ensure that it's running on the Samsung/TMobile SGH-T869. If you have a different model, don't waste your time downloading it. It won't work. I do NOT have this tablet to test with, and a special thanks to shadejinx for doing the testing. That being said, he tells me that the backup and restore both work okay. However, there is an issue with rebooting back into recovery (see Post Installation notes and Issues.) If you want to try this, you should have the knowledge to repair whatever you break - in which case you'll also have the knowledge to unpack this zip file and do things the manual way.
So, once it knows that it's working on the proper type of tablet, this package will make a backup copy of your existing recovery image, and place it in your internal storage with the name starting with "recovery_backup" and ending with the version of the recovery package you installed. For example, recovery_backup_20111206.img.
Next, a new version of the clockwork mod recovery is installed.
Then, the script will look for and delete any existing clockworkMod recovery backups that you have sitting around. Why? Because I'm re-using the script I wrote for the GT-P6210 tab... read that thread if it matters. Once my CWM-based recovery is installed, overwriting it with the same or newer versions won't delete the backups anymore.
Finally, the tab will be rooted. This only involves copying a tiny file (called 'su') to the system. In order for most android apps to make use of that, however, another application must be first installed. (See "Finishing SuperUser installation" below.) I considered putting that "SuperUser" application as part of this package, but it's really very easy to get it from the market.
INSTRUCTIONS:
Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, you won't be able to install this. MicroSD cards are cheap. If you have a tablet that costs 399 USD, you can afford to spend a few extra dollars/euros/pesos/whatever on a microSD card. Just get one. Not only is it required for installing this from the factory recovery, but it makes a great place to back things up to. A nice 16GB card is suggested. 32GB is better. You'll need AT LEAST 1GB for this recovery.
You can download the .zip file directly to your tablet and then possibly use the built in "My files" applet to move it to extStorages/SdCard, or you could download it to your computer and use "adb" to push the file to /mnt/sdcard/extStorages/SdCard, or you should be able to get it there with "Kies." If you have the proper adapter, you could also attach the microSD card directly to your computer and just copy it there. It doesn't matter HOW you get it on the card, as long as it's on the card.
After the zip file is on your microSD card, and the microSD card is inside (and recognized by) your tablet, then you need to...
Boot into recovery mode.
If the recovery version banner is "CWM-based Recovery v5.x.x.x", then you already have a version of CWM installed and should skip ahead to the proper section. If the banner is "Android system recovery (3e)", then you have the factory recovery and should continue with...
Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "t869_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"
---------------------------------------------
Installing from CWM-based Recovery
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "Install zip from sdcard"
2. Select "choose zip from internal sdcard" (which will actually point to the external card.)
3. Select the file you placed on your storage card (starts with "t869_CWMR".)
4. Select "Yes - Install (whatever filename you selected)"
5. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
6. Select "+++++ Go Back +++++"
7. Select "reboot system now."
---------------------------------------------
Finishing SuperUser installation
Install the SuperUser application directly from the android market:
https://market.android.com/details?id=com.noshufou.android.su
....
Post-installation Notes and Issues
I'm aware that after flashing this, it is difficult to get back into recovery. I'm not sure WHY, but it's fairly consistantly a pain in the rear. However, I have found that following the steps in the following post seems to work (at least for me) 9 out of 10 times. (I was distracted on the 10th try, so not sure if it worked or not): http://forum.xda-developers.com/showpost.php?p=20074586&postcount=14
Update: According to shadejinx, this doesn't work for the SGH-T869. However, there's an alternative way, but you must have adb installed: Connect your tablet to the PC you have adb installed on, and power down the tablet. (A full power off - not just standby.) You'll notice that your tablet really isn't fully powered down, as there's a battery icon smack in the middle of the screen. It's in a "low power mode", and "adb" can still talk to it. Use adb to send the following command: "adb reboot recovery". You'll end up in recovery.
Remember above I mentioned that when this package installs, it creates a backup of the old recovery? Well, it does that no matter what recovery was in place. So, if you install this package with a factory recovery, that backup will be of the factory recovery (which is probably what you want.) If you install this package a second time when you already have the CWM Recovery installed, you'll overwrite that factory recovery backup with a backup of the CWM recovery (which makes no sense.) I'd strongly suggest that after you FIRST install this package, you make a copy of that backup recovery image file (and full filename is displayed when it's created), and stick that copy someplace safe. Perhaps just rename it and copy it to your SDcard or computer. A good name might be "t689_factory_recovery.img"
Donation?
I don't take donations. If you have spare money (I don't), please donate it to the Salvation Army, Red Cross, or just find a homeless person on the street and give them something. My favorite charity is the Shriner's Hospital for Children. (yes, I am.) If you'd like to thank me, there's a button at the bottom of this post dedicated to that. If you don't want to thank me, that's okay too.
Changes for 20111213:
* A backup of the existing recovery image is no longer being made. I feel this is no longer needed, as an ODIN package is now confirmed to be working that people can use to restore their tablets to a factory state.
* Old clockworkmod recovery backups are no longer being deleted when installing this. If you are installing this or newer from my CWM recovery previous to Dec 9th, 2011, please manually delete all those old backups. If you attempt to restore them, please be prepared to download ODIN and a factory ODIN image, as you'll need it in order to get your tablet working again. You've been warned...
* Issues with getting into recovery are resolved. (after this update, you shouldn't need to use adb while the tablet is powered down.)
Here's the link for the recovery/root .zip (for the tmobile SGH-689)
version 20111213: http://www.mediafire.com/download.php?oro674o2881kw54
old versions:
version 20111206: http://www.mediafire.com/download.php?07ucaimq8qs6q05
Take care
Gary

uploaded and available. (message is to mark the thread as unread and as a place-holder for future notes.)

Your donation note is cool, man.

Just flashed update. It works fine I have root everything works the same installed superuser from market. Great work now all we need is a nice ICS ROM and voodoo
Sent from my SGH-T869 using XDA App

I wonder if tmobile would let me borrow one of these for a couple days so I can test some updates to the recovery.
"Hello, welcome to T-Mobile. Can I help you?"
"Yes, I'd like to quietly sit over there and attach my notebook computer to one of your demo tablets for about an hour to test voiding the warranty by flashing in low-level tools that, among other things, will allow anyone to bypass all the silly locks you people put on these devices. Oh, and I'm not a tmobile customer (and probably never will be.) Okay?"
heh

CSR: sure, go right ahead. Could you root it and install a custom ROM while your at it.. we've been getting tired of looking at this same old spoon fed sammy touchwiz and samsung apps nobody uses. Overclock the snot out of it.
just kidding, back on topic..

@garyd9 I'll get the updated recovery stuff tested tonight.

Updated and a new link posted in the OP.
Thanks to shadejinx for testing.
Changes for 20111213:
* A backup of the existing recovery image is no longer being made. I feel this is no longer needed, as an ODIN package is now confirmed to be working that people can use to restore their tablets to a factory state.
* Old clockworkmod recovery backups are no longer being deleted when installing this. If you are installing this or newer from my CWM recovery previous to Dec 9th, 2011, please manually delete all those old backups. If you attempt to restore them, please be prepared to download ODIN and a factory ODIN image, as you'll need it in order to get your tablet working again. You've been warned...
* Issues with getting into recovery are resolved. (after this update, you shouldn't need to use adb while the tablet is powered down.)

garyd9 did this work blind and it worked perfectly the first time... I am very impressed. Anyone who reads this needs hit the thanks button on the OP.

garyd9 said:
* A backup of the existing recovery image is no longer being made. I feel this is no longer needed, as an ODIN package is now confirmed to be working that people can use to restore their tablets to a factory state.
Click to expand...
Click to collapse
Where have you seen this?

rxxt said:
Where have you seen this?
Click to expand...
Click to collapse
I used the magic "search" function in XDA. It's a really cool feature of the site that lets you press a button, type a few letters, and find things.
Even if you aren't capable of using that function (and quite a few people are search-impaired for some reason), or if you might be searching for the incorrect term (I've done that myself a few times) you can always search manually. That involves opening threads and reading through them (not just the first post!)
I know that if I were looking for a firmware image, the DEV subforum thread marked with "Official FIRMWARES" would catch my attention, and I'm sure I'd find something useful if I spent a minute scanning through the thread that's less than 30 posts long. (That's a hint, by the way. I absolutely refuse to provide a direct link.)
Good hunting!
Gary

Sry, it was exactly the search function there do that I found this thread, but now I can see that it is too 'Galaxy Tab Plus', it was only 'Galaxy Tab' that Iam looking for, therefore the misplaced question..

(first the original reply)
rxxt said:
Wow, is it really true .. You have really savedmy day, damn well you tell me about the search option, otherwise I never havefound it, I can not thank you enough, what would we do without people likeyou..
Click to expand...
Click to collapse
Alas, 'tis true that some folk could never get along without those of us who point out the obvious.
(and now the current edited version)
rxxt said:
Sry, it was exactly the search function there do that I found this thread, but now I can see that it is too 'Galaxy Tab Plus', it was only 'Galaxy Tab' that Iam looking for, therefore the misplaced question..
Click to expand...
Click to collapse
Thank you for making my point.
edit: Please don't take my sarcasm personally. It's how I keep sane.
Take care
Gary

With the release of ICS, and seeing that others have taken over carrying the torch for updated and more modern versions of CWM Recovery, I'm no longer going to be supporting this release.
I'll leave the thread intact, but request that it be locked.
Oh, and I am still around, but I'm giving my Galaxy Tab 7.0 Plus to my wife. The stock firmware is actually very good for her, and she doesn't demand the amount of control over a tablet that I want.
Take care
Gary

ROM Manager has killer my TF101!

Righto. Before we go any further, jsut to say I am a relatively experienced rooter of Android handsets. Not tabs, granted, but handsets. Last night I rooted my TF and flashed Megatron and recommended kernel, no problem. I've had no problem taking nandroid backups or restoring as I've done that several times today, all with expected results.
Then I opened ROM Manager and allowed the app to update, I guess updating CWM too.
I then fiddled with SetCPU overclocking the CPU. This caused the tab to stutter a bit. Then freeze. Anyway, I hard rebooted and went into recovery to try and flash the backup I took about an hour ago. Now, CWM looks different (I guess this is where ROM Manager updated). I flashed the backup which seemed to go ok, but then when the TF rebooted I got an Android message saying that encryption hadn't worked properly, and that I would need to do a full (factory) reset. I hit ok and let it do it's think. The TF rebooted, but went direct into Recovery.
I tried wiping everything using Factory Reset, and wiping Dalvik, etc, but every time I tried I got a message saying "E: Can't mount /sdcard/" and then it reverted back to the main menu structure. Even when I choose "Install zip from sdcard" > "choose zip from sdcard" I just get a message up saying "E: Can't mount /sdcard/" and that's all she wrote. I think a) ROM Manager may have caused this and b) it's royally wrecked.
I did find teh following in a TF guide regarding cold booting:
-Quote-
11. Now do a Cold Boot (aka Hard Reset). This cleans system caches, but does not delete any user data.
Unplug the power cord and shut the unit off. Press and hold the VOL DOWN and then POWER button at the same time for at least 10-12 seconds until after the start-up screen appears and is joined by some small print at the top of the screen, then let them both go. If the TF booted the way it always does, you have not accomplished the task, try again until you have seen the 2 icons in the screen.
After a few seconds you should see a couple of icons in the middle of the screen called "Wipe Data" and "Android". The right "Android" will have a green highlight fading in and out. Wait a few more seconds until the term "Cold Booting Linux" appears in the list near the top of the screens and let it reboot. If you own a keyboard dock be sure you do this with the dock connected.
This process applies to all TF models, however, if your Prime or tf300 is locked up, there is a reset available using the hole just below the microSD slot, this is NOT the same as a hard reset.
12. Finally, restore your photos, docs etc & reinstall your apps from the backups, one group at a time & cold boot between each group that you restore. (Unless you are resetting because of system instability. In which case, read the next section, first.)
-Unquote-
I tried doing this but the TF froze at the point where the unit says "Cold-booting Linux". I left it for a good 30 minutes but no joy...
The other issue I have is that even when I attach my TF to my PC the PC doesn't recignise the unit. It knows I'm trying to attach something but it doesn't know what. Therefore I don't think I can flash anything like a new CWM version or kernel if the PC doesn't know where or what to flash to...?
I'd love to hear anyone's thoughts on this one...
Thanks in advance!

"Then I opened ROM Manager and allowed the app to update, I guess updating CWM too." - Never use ROM manager on the TF, it causes extensive problems. There is a warning thread about this in General.
You'll want to try running Roach2010's fix, either via my PERI tool (in my sig) or by manually typing the commands.

Lifesaver! One problem - when I plug my TF into my PC using the USB cable it doesn't recognise it. Won't this be a problem?
Sent from my GT-I9100 using xda app-developers app

(Also, I've replied a bit more to your post on Transformer Forum - Thanks mate!)

Alright you're going to want to download this while you read -- http://xdafileserver.nl/index.php?dir=Asus/Asus+Transformer+(TF101)/STOCK+ROMS/ICS+.24
Quick guide:
1. Connect cable to computer and turn device on while holding down Volume Up. Screen will stay off, but USB will come on.
2. Find “APX” device in Device manager and update driver, then point it at usbpcdriver directory from the zip.
3. Run download.bat.
In the link below a driver package is also included, you need to either...
Code:
Open the Start Menu, type 'cmd' and hit enter, then type:
pnputil -a C:\path\to\driver folder\NvidiaUsb.inf file
exit
Then plug in the TF in APX mode and windows will find drivers automatically
Or you right click computer and hit 'Manage' and then hit 'Device Manager', find the ? entry that says APX and right click and hit 'update driver', then navigate to the folder.
Download the unbrick .zip from here: http://xdafileserver.nl/index.php?dir=Asus/Asus+Transformer+(TF101)/STOCK+ROMS/ICS+.24
(Before each file are 2 letters, (US, WW, CN, TW...) pick the one that is your Region. I'm assuming you need WW, which stands for World Wide, but if you reside in Taiwan take TW, China take CN and America take US.
Also download Wheelie NvFlash from here: http://androidroot.mobi/2012/05/31/wheelie-for-windows-beta/
Extract it, and copy the Contents of the folder into the Unbrick .zip folder's contents main folder, Overwrite any files that conflict.
Then you should be able to run Reflash_Sbkv#.bat to unbrick your TF in APX mode that is connected, try Sbkv2 first, then if you get access denied try Sbkv1.
Hope you're sorted out!