Hi,
I have a blackjackII smartphone and was trying to figure out how to use A-GPS.
I opened a file called gpstest.exe in the Windows folder (Is a hidden file so I had to use a tool name totalcommander to be able to see it) and was wondering if that would control the use of Assisted GPS, meaning that will download satellite ephemerides to faster lock.
Is there any tool such as quickGPS for the SGH-I617 phone?
any one has used A-GPS on this phone succesfully?
thank you,
matimont said:
Hi,
I have a blackjackII smartphone and was trying to figure out how to use A-GPS.
I opened a file called gpstest.exe in the Windows folder (Is a hidden file so I had to use a tool name totalcommander to be able to see it) and was wondering if that would control the use of Assisted GPS, meaning that will download satellite ephemerides to faster lock.
Is there any tool such as quickGPS for the SGH-I617 phone?
any one has used A-GPS on this phone succesfully?
thank you,
Click to expand...
Click to collapse
you need an aplication to use it because it is not independent as GPS.... try googlemap, garmin or tomtom....
also you need to update your gps information.....
Related
Hi
I have the above app but I cant the installation CAB to put it on my PDA, can anyone adise what its called and where it's located at all please?
Thanks
PB
there's a cab file in 'PDA' folder amoungst the program files in my installation. MM say to install from the UI (pda menu) though so I'm not sure if this cab will work as a direct method - be keen to know though as I can't get my version to install to my elf from the app. Let me know how you get on if you try it!
Keith
With MM running on the PC and the mobile device connected via AS simply select "Mobile Device" / "Install Pocket Navigator" this selection from the menu bar will install the application to your device, then work out which part of the map you need on the mobile unit and transfer that over.
Don't try putting a full map section onto the PDA/ Phone as it will not be capable of opening it, just use the "send visible portion of map" to load sections of map - I tend to keep the map size below 150MB when using a PDA - Mike
Thanks Mike I completely missed that one...
Its easily missed to be honest, when I switched to MM5 I had to search for the PDA install as it was quite different to what I was used to - hope you have it all working now though - Mike
Does anyone know if you can get a cab file or if there is a registry tweak to restore internet sharing (pan) to WM 6. I have a pre release kaiser that has wmodem but no internet sharing and I cant get dun to work properly to tether to my laptop for internet. I thought wm 6 came standard with internet sharing so I dont know if it's hidden (registry tweak) or if it's been taken off the rom and there is some way to restore it. Any help would sure be appreciated. Thanks
Try this.. unzip it and copy the 2 files into your widows directory on your phone. then create a shortcut icon in Windows>Start Menu>Programs
That worked! You the man. Thanks so much for the help.
you're welcome
wm5?
Is there an internet connection sharing for WM5?
I have a Softbank X02HT Windows Mobile Smartphone Edition (same as HTC Cavalier / Dopod C730) with crippled Internet Sharing.
I tried this cab file which would open the UI but would show blanks for the Internet and local connections. I managed to pull off the intshrui and intshrui.dll files from a Samsung Blackjack, and now it shows connections and I can actually establish a connection - but when I connect my PC to it, it fails to get an IP address.
Does anyone know which other files are being used by Internet Sharing? Which other files beside intshrui.* do I need to copy from the BlackJack, or if it is even possible?
khammo01 said:
I have a Softbank X02HT Windows Mobile Smartphone Edition (same as HTC Cavalier / Dopod C730) with crippled Internet Sharing.
I tried this cab file which would open the UI but would show blanks for the Internet and local connections. I managed to pull off the intshrui and intshrui.dll files from a Samsung Blackjack, and now it shows connections and I can actually establish a connection - but when I connect my PC to it, it fails to get an IP address.
Does anyone know which other files are being used by Internet Sharing? Which other files beside intshrui.* do I need to copy from the BlackJack, or if it is even possible?
Click to expand...
Click to collapse
Same problem here. Maybe the .dll file is carrier specific. A stretch but I can't think of any other reason why this doesn't work.
X02HTC help
hello there,
i am thinking of getting a x02ht but i am not sure if it is possible to unlock the device so i can use it with other carriers? is there a way to flash it but still be able to use japanese and softbank services like sms/mms? (and mobile mail). would be great if somebody could direct me to a threat/link where i can find a bit more info about this.
cheers,
joma
There are no threads. We are asking for a Cavalier forum but nobody is doing any yet.
Internet connection sharing
I downloaded the internet sharing files, but when I run the program on my Samsung Blackjack II the "PC Connection" and "Network Connection" fields are empty and it does not let me change it.
Hi Ericc191,
The ROM I used to upgrade my JAMin did not have Internet Sharing, but your post fixed that for me.
Thanks heaps,
Perc
when i open program, and tap connect, i get "cannot connect for unknown reason, check settings" on my xv6800 (verizon) im trying to tether without using vz access manager. please help...
thaaaaaaaaaaaaaanks man u r the best its working perfect
This doesnt work for me, using unlock gps vzw 910 Rom, program loads and i clcik connect says connected, but when i just to use IE or Chrome on my lappy, it says page cannot be found, any ideas on how i can fix this?
Thanks
thank you very much.
The windows directory doesn't appear on my explorer?? (Through my PC) How can I make it visible?? Also, how do you make a shortcut through the phone?? (Sorry, noobe here)
Brilliant
The cab file works like a dream for my English Touch diamond via the USB, i will check out the bluetooth later.
Hello together!
After installing TomTom on my HD2 the internal Bluetooth-function doesn´t work...as far as I know it is recommended to rename/delete the following files to fix this issue:
BTTrayCE.exe, BtSdkCE30.dll and BtCoreIf.dll
But in fact I can´t rename/delete any of these files...tried with windows explorer, TotalCommander and the HD2 Explorer (I don´t know if they are in use?! according to the task mangager they aren´t)
So could anybody please upload these 3 files from a working HD2 Device?
I renamed BtSdkCE30.dll and deleted BtCoreIf.dll.
For some reason BtSdkCE30.dll was in use, but I was able to rename it.
As far as I know you leave BTTrayCE.exe the way it is.
Done with Total Commander btw.
Maybe restart your HD2 if you can't even rename them, then try again before doing anything else.
Tomtom doesn't list the software as compatible with the HD2...
So i can imagine none of you did buy it and all use a not compatible cracked version. tttttttttttttttt
So now enjoy the dark side !!!!!!
brooon said:
Hello together!
After installing TomTom on my HD2 the internal Bluetooth-function doesn´t work...as far as I know it is recommended to rename/delete the following files to fix this issue:
BTTrayCE.exe, BtSdkCE30.dll and BtCoreIf.dll
But in fact I can´t rename/delete any of these files...tried with windows explorer, TotalCommander and the HD2 Explorer (I don´t know if they are in use?! according to the task mangager they aren´t)
So could anybody please upload these 3 files from a working HD2 Device?
Click to expand...
Click to collapse
this works with almost any problem situation with tomtom...
preferable, install to memorycard on another device, then run tomtom from card without installing it, cause you put all the files on memorycard already... yes i did buy it for my touch pro...
If you are installing with a cab file,
Install in your storage card and hard reset.
Now, don't install again.Copy tomtomnavigator.exe from program folder in storage card and place a shorcut in windows programs folder.
blue8300 said:
Tomtom doesn't list the software as compatible with the HD2...
So i can imagine none of you did buy it and all use a not compatible cracked version. tttttttttttttttt
So now enjoy the dark side !!!!!!
Click to expand...
Click to collapse
It's working well on my HD2 without issues.
Hey there!! First, thank you for your answers!
Well, i really don´t want to make a hard reset!! TomTom itself runs very well on the device (and it runs on my device too), my only problem is that the bluetooth will not work as long as these three files have not been deleted or rather been exchanged with the untouched files .
Let me explain that: If files have been deleted, the HD2 will restore them from the rom automaticly after a reboot and everything is fine. Most people who had to handle with the same problem (TomTom vs. Bluetooth) had success with this method, but a few devices deny the access on these files, so they can´t be deleted or renamed. So is mine.
And for this reason I asked for the original files from a working rom! It would make it possible for me to replace my corrupt files...
Has anybody of you guys a few minutes of time an wants to upload the three files please?
It would really make my day!!
brooon said:
Let me explain that: If files have been deleted, the HD2 will restore them from the rom automaticly after a reboot and everything is fine. Most people who had to handle with the same problem (TomTom vs. Bluetooth) had success with this method, but a few devices deny the access on these files, so they can´t be deleted or renamed. So is mine.
Click to expand...
Click to collapse
If device deny access to files, they cannot be renamed or deleted, you cannot replace them with other files too... (do you tried Resco Explorer?)
I have made a personalized cab of TomTom Navigator which doesn't install the bluetooth-specific files. If needed I can upload it somewhere and give you the link via PM
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
xardus said:
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
Click to expand...
Click to collapse
In TT tap to GPS signal bar and next tap on button with version number
Petulinek said:
In TT tap to GPS signal bar and next tap on button with version number
Click to expand...
Click to collapse
i know that...but without a map activated i cant see that screen...it only says "ur map isnt activated" and only button i have is for download a voucher....i try with an older version but i cant find tomtom 5 on the web
xardus said:
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
Click to expand...
Click to collapse
You mean the device ID?
You can open the ttnavigator.bif with notepad in your PC for the device details.
How I fixed the problem
I had the same problem, so I deleted the three files with resco. Two of the files will "appear" not to be deleted because they are ROM files. The important thing is that you need to have a shortcut to BTTrayCE.exe in \Windows\Startup.
Thanks for the posts!
As I said, it´s not possible to delete the files in my case...thats why i want some original files to exchange them.
...Is nobody out there how wants to upload these three little files for me? ...
I had this, All I did was launch TC, goto \windows do a select bt* delete all files, and it fails to delete most of them, but soon as I did that BT came back to life....
I can't help with the missing files as my device has still to arrive but I read that installing version 7.915.9196 VGA from HTC Iolite works without the bluetooth problem.
hey guys i could really use that bluetooth file.. i sorta messed it up too with the tom tom...
Hey Londontownguy:
Thanks for your suggestion! But as i said above, i really don´t want to hard reset. And the 7.915.9196 VGA from HTC Iolite doesn´t contain the "healthy" files, so an installation without hardreset doesn´t fix the problem.
Now we are two people including phatjesus81...andagain:
...Is nobody out there how wants to upload these three little files?...
myeah..
i cant start my bluetooth anymore because last week after installing tomtom7 i got the error and baleeted BTTrayCE.exe somewhere , even though it is in my \windows\ folder together with the btcore and btsdkce50 dlls.. cant remove those..
so BBTrayCE.exe is in my windows folder right now , and bluetooth wont start.. does that have anything to do with the other two dll's still being there or am i a booboo?
i mean, i totally removed ttn..
so now i'm totally stuck..
HD2-- footprint is set to use CoPilot as default navigator.it won`t start up googles either. Does anyone know how set this to GoogleMaps or TomTom and how to switch between these two.
TomTom works great on my HD2.
Thanks
+1 on this, i use tom tom so this would be great
push for this cool tricky idea
I definitely want this option! I dont use copilot at all. I would rather have iGO or google maps.
Richard van der horst said:
HD2-- footprint is set to use CoPilot as default navigator.it won`t start up googles either. Does anyone know how set this to GoogleMaps or TomTom and how to switch between these two.
TomTom works great on my HD2.
Thanks
Click to expand...
Click to collapse
I HATE CoPilot Demo... To disable CoPilot from Footprint and Navipanel do this registry edit:
Locate
HKEY_LOCAL_MACHINE\Software\HTC\NaviSW
"SDKModule"="\windows\alksdk.dll"
And make "SDKModule" Value empty.
Soft reset phone.
Footprint converts to Google maps.
Navipanel will not work for gps navigation. Haven't found a good way to do that yet. But I'm trying and searching for solution
I found a simple sollution (just 2 minutes ago)
1. On your phone...got to folder where CoPilot is located
2. Rename CoPilot folder to CoPilot_ (or some other name not equal to CoPilot)
3. On your pc go to the folder (Tomtom) Navigator and copy the folder to the root folder where now CoPilot_ is located
4. On your phone rename Navigator folder to CoPilot
5. On your phone in the now created folder CoPilot, rename TomTomavigator.exe to CoPilot.exe
You should now have these folder:
CoPilot_ (or other name)
CoPilot
And possibly Novigator
restart en test...
Hope this will work out for you guys too
cheers Roy
Hi!
My touchscreen stopped working and I really need to get my new sms's and contact list from the the phone (TD2). Is this possible? I'm able to browse to phone while connected through usb in Vista but I don't know where the information is located and whether or not it's viewable from Windows.
Any solution to this?
Easten said:
Hi!
My touchscreen stopped working and I really need to get my new sms's and contact list from the the phone (TD2). Is this possible? I'm able to browse to phone while connected through usb in Vista but I don't know where the information is located and whether or not it's viewable from Windows.
Any solution to this?
Click to expand...
Click to collapse
search an application named "my phone explorer" for ppc.
krishan2207 said:
search an application named "my phone explorer" for ppc.
Click to expand...
Click to collapse
Weird, the software says "can't find the phone" after searching through com-ports. Though windows finds it and I can brows it through explorer.
Anyone knows a fix for this or any other way to get this information. My phone explorer looks good though and exactly what I need but it's strange I can't get it to find my phone....
edit: As I mentioned I use USB but that's not an option in the settings next to "port".. I can only chose "COM1"
Use My Mobiler to view your PPC TD2 screen on your PC (link in my signature)
You can extract sms & contacts using PIMbackup (found free on xda or via google) or many other software backup options.
If the above fails to work you can copy the pim & cemail file from your phone device directory.
Mister B said:
Use My Mobiler to view your PPC TD2 screen on your PC (link in my signature)
You can extract sms & contacts using PIMbackup (found free on xda or via google) or many other software backup options.
Click to expand...
Click to collapse
First, thanks alot for the help. Second, My mobiler needed me to confirm on touch screen on my phone which is not possible, a software like this without this would of been perfect.
PIMback doesnt seem to work with Windows 7 or I need some additional files/apps 'cause it says its not a valid win32 software..
Still, I try to get it to work, meanwhile I'd appreciate if anyone has more suggestions to share. I've been looking around but is unable to find programs that work. Pretty puzzled why this is such a hard task.....
Where is the pim and cemail files located`? I find a pim file but what is the best way to view these?
Edit: I see pimbackup is a program for windows mobile. I need a program for windows OR a program which could extract the information from pim and cemail files or any other way to get this info
....one more thing, it seems impossible to read or copy the fil "cemail".. it says the file is being used or something.. guess my hope of retrieving the sms's and so on are gone.. I was able to copy the pim.vol file though... maybe I will be able to get my numbers, but how?....
The manual files of My Mobiler launched Via PC has never asked for input via PPC screen n any installation I have done & have used it on a couple of broken screen devices for work employees.
You can load your pim file to another device or WM PC emulator to recover data, or forward to me (PM me) & I will try make recovery files you can view via PC & use to install to another device.
Jeyo Mobile Companion worked for me.