Hi, I cannot seem to get my AC3.2 to save my settings. I used it to hide SIM contacts from my contacts, and after a soft reset, the sim contacts are visible once again!
The other thing is, my university uses a WPA and PEAP wifi encryption thing (sorry, I don't really know much about networking), and I cannot seem to connect. I put all my settings in correctly, entered my username and password as instructed (I am required to enter it in), and I cannot connect. What happens is I press "Connect", and it just kinda blinks, but nothing happens..
Any ideas? Thanks
v3.3 is out
there is currently no way to stop sim contacts appearing after softreset
I noticed there isn't an option like on the HTC devices that let you choose WIFI ONLY or MOBILE + WIFI. It appears they took that out completely on the Samsung Roms? Is there anyway to disable DATA all the time? I'm in a wifi access point 24/7 literally. Sorry folks, only thing im curious about.
I would like to know also. None of the apps I have tried have worked yet.
Sent from my SAMSUNG-SGH-I897 using XDA App
Did you try to remove AT&T APN in Settings? It will not be able to connect to 3G without APN.
If you do not want to lose your APN nsettings, create new one, dummy, without any real data inside, and make it default one. Same results.
Another thought, if you have your Wi-Fi turned on all the time, your 3G connection should be switched down automatically. At least it works like this on N1. I am just thinking of bying Captivate, if it will have good custom ROM with Froyo, not taking it with all AT&T bloatware on board and Android 2.1
in the market check out the apps APNdroid and quick settings. Both have toggles for data connection
You can also put it in airplane mode and them just turn wifi on.
Sent from my SAMSUNG-SGH-I897 using XDA App
tonysunshine said:
in the market check out the apps APNdroid and quick settings. Both have toggles for data connection
Click to expand...
Click to collapse
Thanks dude I picked that up works Great on Captivate. I'd rather use something like that than enabling wifi 24/7 to eat more battery etc.
I've tried downloading a number of free apps (including APNdroid) to turn off mobile data on my Captivate, but none of them seems to work. All the widgets give the impression that it is off, but I can still open the browser and navigate to websites. Am I doing something wrong, or is it just not possible to fully disable mobile data access on a Captivate?
Yeah you're right
@alobotnad
Hey you're right, APNdroid does nothing it doesn't even shut down the 3G icon on my device now and yes it still connects either way like you said.
Apndroid works fine on my captivate!
Sent from my SAMSUNG-SGH-I897 using XDA App
hazard96 said:
Apndroid works fine on my captivate!
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
You see the 2G icon when you run it?
On my Captivate APNdroid only partially works. Let me explain. If WiFi is on I can disconnect 3G using the APNdroid widget (then if I turn off WiFi and try to surf the web I can't.) However turning 3G back on is more complex. I can turn it back on using the widget if I m connect already to a WiFi network and it will turn 3G on when I turn off WiFi. HOWEVER you must be connected to a WiFi network to turn 3G back on not being connected to a network means the APNdroid button doesn't work. The only solution I found to turn on 3G if I wasn't connected to a WiFi network was to turn on 3G through the APNdroid widget and then restart the phone.
On the other hand I am currently using Juice Defender and their 3G WiFi widget works without having to jump through all those hoops.
@icedfire101
Thanks for the info. I downloaded the free version of JuiceDefender today and so far I am happy with the results.
Samsung Captivate 3G Toggle Solution
After all the digging and searching around, I found two apps that work perfectly on Samsung Captivate for toggling mobile data (3G)
- Juicedefender (it has a widget you can use to toggle 3G quickly)
- SMODA Widget (It doesnt have too many 5 star ratings but works fine on my samsung captivate).
My phone is rooted but I believe it is not a requirement of either of the above apps. Hope this info is useful for other captivate owners.
Most of the other APN / 3G toggle apps on the market try to put a suffix on the APN names in settings. On the samsung captivate this works only with a restart/reboot. Meaning if you disable 3G using the app it would put a suffix like 'disabled' or something to the APN name. But your phone still has the 3G connection using the original APN settings. Only after you restart the phone does it see the 'disabled' APN name and is not able to use and hence no 3G. Vice versa when you want to enable 3G back - needs restart.
I dont know what process the above 2 apps use but they work instantly on my samsung captivate. No need to restart or click a bunch of other settings. They work perfectly and as simple as it should be.
Concepts behind Reliable 3G Toggling on Captivate
First time poster, hope its not immediately dismissed as TLDR.
For the quick-and-dirty just read the “Reliable Data Disabling”.
I am an advocate for understanding concepts. Solutions, hacks and work-arounds have their place, but, if we can understand more about how and why those solutions work, we might be able to repurpose those ideas and use those ideas to make better applications.
Upload and Download of data coming from the cellular network (as opposed to wifi) is likely determined by which network adapter the network connections are making use of. This might be determined by the android sub-system, by looking at the details of currently open sockets; or by lower-level processes looking at the addresses associated with Rx/Tx data. There are several other ways this could be achieved, and I am sure there are countless people who know exactly how that little 3g icon gets on screen; I am merely laying the groundwork to point out that the Captivate (and possibly the Samsung ROM specifically) is apparently more adept at retaining these residual 3g connections than other Android ROMs.
Let’s assume background data opens a series of sockets to communicate with all of the servers that a person’s phone will sync with. By obfuscating the APN like APNDroid does, we are changing the source of the configuration settings, but connections which are "kept-alive" would not check for new settings. This is why those connections remain open after we activate APNDroid. From this idea we derive at least two strategies that work:
Reliable Data Disabling:
Once an APN obfuscator has effectively disabled 3g by spoofing APN information, you can follow up the data-shutdown with the one-two punch of either disabling the cellular radio, or by intelligently terminating connections that don’t match the current APN paradigm. My understanding is there are no apps that take advantage of the latter.
Disabling the radio: Those who have a shortcut-to-activity application, one might feel compelled to use the “Testing” activity to disable the cellular radio, but, the contents of Testing can be dangerous. It is possible to cause problems with your phone using the Phone Information section of "Testing".
The Captivate is nice and fast, enabling flight-mode and disabling it after 10 seconds terminates all residual data-connections 95% of the time.
1. Activate APNDroid (or other APN Obfusctor)
2. Activate Flight Mode (or disable cellular radio some other way)
3 Disable Flight Mode (or reactivate cellular radio)
----
In the past 2 weeks I have discovered that when I re-enable my data, the 3g icon comes back right away but my phone makes no attempt to create new connections using the restored settings. The only solution I have found (so far) is to reboot the phone which only works about half the time. I have not stepped through the problem with the android debugger.
Has anyone else noticed this?
i use smartbar , it turns on/off data and does much more.
Best way to turn off 3g data in samsung captivate
To disable data connection.
In phone menu type *#*#4636#*#*
a menu will appear. In that click "phone information".
click the option button (which is the bottom left button you have in phone).
In that go to "more" option.
inside that click "disable data connection".
Thats it 3g icon will not appear up there in phone. but you can use wi-fi.
To enable it .
do the same thing above . but at the final moment you will be shown a menu with option "enable data connection".
clicking it wont immediately enable data connection. you have to restart your phone.
If you dont want to restart your phone .
then go to settings->wireless and networks->mobile networks->access point names.
there should be apn called "ATT WAP".
Click the more option button at the bottom left and click "reset to default".
Thats it. Now your 3g icon will appear at the top (provided wi-fi is turned off).
tonberry1031 said:
1. Activate APNDroid (or other APN Obfusctor)
2. Activate Flight Mode (or disable cellular radio some other way)
3 Disable Flight Mode (or reactivate cellular radio)
----
In the past 2 weeks I have discovered that when I re-enable my data, the 3g icon comes back right away but my phone makes no attempt to create new connections using the restored settings. The only solution I have found (so far) is to reboot the phone which only works about half the time. I have not stepped through the problem with the android debugger.
Has anyone else noticed this?
Click to expand...
Click to collapse
Good post. You are correct that the captivate will indeed hold onto the valid connection even after modifying the APN. Flight mode toggling will sever the connection forcing it to use the modified settings which should prevent it from reconnecting to data.
The way I disabled my data connection before froyo (all hail froyo data power- button toggle) was to make a shortcut to my APNs and I made a "disabled" APN that was just called disabled. I would have to select it and then toggle flight mode to disable, but reconnecting was as simple and just selecting the real APN and it would immediately reconnect. Never had to restart phone to reconnect, except when using programs from the market.
mettup said:
To disable data connection.
In phone menu type *#*#4636#*#*
a menu will appear. In that click "phone information".
click the option button (which is the bottom left button you have in phone).
In that go to "more" option.
inside that click "disable data connection".
Thats it 3g icon will not appear up there in phone. but you can use wi-fi.
To enable it .
do the same thing above . but at the final moment you will be shown a menu with option "enable data connection".
clicking it wont immediately enable data connection. you have to restart your phone.
If you dont want to restart your phone .
then go to settings->wireless and networks->mobile networks->access point names.
there should be apn called "ATT WAP".
Click the more option button at the bottom left and click "reset to default".
Thats it. Now your 3g icon will appear at the top (provided wi-fi is turned off).
Click to expand...
Click to collapse
So how well does this work?
I'm going to Europe tomorrow and I don't want to be eaten alive on roaming data.
Thanks,
Super
Quick Settings in market, works great on my captivate.
Superguy said:
So how well does this work?
I'm going to Europe tomorrow and I don't want to be eaten alive on roaming data.
Thanks,
Super
Click to expand...
Click to collapse
Depending on what countries you're visiting and for how long, you might consider getting a prepaid local SIM card from that country. I've done that in a couple of different countries and was able to get prepaid data deals for a $2-$3 a day. Will vary greatly depending on country and carrier. And, of course, your phone will have to be carrier-unlocked to use the SIM card.
I currently have APNdroid, juicedefender and extended controls with an APN option installed. Could they be interfering with each other?
If I'm not in a wifi hotspot and I try to enable APN to connect to the internet, the connection always fails. I know that there's 3g where I live and that it used to work but it doesn't work. If I send an email, it does eventually get sent. Does this have to do with juicedefender?
How exactly does apn/3g work? What if I have it on while my wifi is also connected?
sorry for the noob questions.
-edit-
Turned out my APN settings were corrupted or something.
For those interested, I just reflashed some of the files under database of the telephoner app.
My rooted Motorola Defy's GPRS connectivity has disappeared after I was playing around with the program SMS Studio.The program allows you to use your phone's modem as the gateway for SMS polling.
I still can connect to Net via wifi, general phone works OK, and I can do a Mobile Network search, see, and apparently choose, my 3G service provider, but when I check "Mobile Network Status" the status is always "Disconnected".
Is it possible for such a program to alter the modem's settings, or in any case, is there some way to reset just the modem to its default settings?
If I cannot reset just the modem, will a Factory Reset, followed by a restore via Titanium Backup achieve the same effect?
many thanks
spinifex
hi. can anyone help me please?
i have recently updated my sgs2 to android version 2.3.6. i noticed that network data mode doesn't seem to be working correctly. even if i have enabled it already still no connection. The notification icons are not even showing. Already enabled the "use packet data" setting under mobile network settings but still not able to connect. also tried resetting the apn settings still no luck GPS icons are also not showing when trying to enable via the notification bar.