At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
humanoide said:
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
Click to expand...
Click to collapse
Are you using the stock rom that came with your phone? have you changed any settings?
i get this too and i have the stock fuze rom without any adjustments to connection settings or anything...
shade
humanoide said:
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
Click to expand...
Click to collapse
This happened to me. I ended up going into the settings and removing the user name and password for MediaNet. After doing that, I don't have the problem.
Bingo, that did it...removed user name and password from MEdia Net in Settings/Connections. Thanks.
guys how can i get media net back on my phone? i put the ROMeOS os on my phone and i cant go to the mobile version mymedianet home. so i can view my movie theatres and stuff. thanks!
anyone help please?
ACMilan07 said:
guys how can i get media net back on my phone? i put the ROMeOS os on my phone and i cant go to the mobile version mymedianet home. so i can view my movie theatres and stuff. thanks!
Click to expand...
Click to collapse
start, settings, connections tab, connections, advanced tab, select networks, new, general tab add media net as name,
modem tab:
new, enter media net as name cellular line gprs as modem, next, access point:
wap.cingular
netx, user name and pass blank, finish.
proxy settings tab, check both, network connect to internet and uses a proxy, advanced
add the proxy:
click http server: wireless.cingular.com port 80, no user or pass
socks server: localhost port 1080, no user or pass
ok, ok. ok, ok, x and test
im using proven rom and its been working fine but today my internet no longer works with my isp at all
and media net connection works with opera and checking weather in TF3D along with sending pic msgs but wont work with skyfire, email or other data programs
what could cause this?!?
imtribble said:
This happened to me. I ended up going into the settings and removing the user name and password for MediaNet. After doing that, I don't have the problem.
Click to expand...
Click to collapse
Yeah but can you still send MMS?
I couldn't send MMS. ATT Tech told me to go and re-sign-up @ MYMedia.net (even though all worked fine on my Tilt and 8525 for the last 2 years). Once I re-registered, I could send MMS, but I still have to sign-in when the phone was power cycled or re-booted.
dgduris said:
Yeah but can you still send MMS?
I couldn't send MMS. ATT Tech told me to go and re-sign-up @ MYMedia.net (even though all worked fine on my Tilt and 8525 for the last 2 years). Once I re-registered, I could send MMS, but I still have to sign-in when the phone was power cycled or re-booted.
Click to expand...
Click to collapse
So, what is the solution?
I tried all the options but no avail:
Disabled proxy with builtin cab
Used Advance Config Tool & Diamond Tweak to disable 3g
Increase Power to WIFI
Enter the proxy credentials properly
Select WORK in the connections
I am connected to the network through the WEP key. I have an IP address.
But the thing the intrigues me the most is that I cannot hit outside with Opera or IE unless is the Intranet. BUT, I can hit my comcast email throught the email tabs>inbox>send receive. This email account is from the outside. How the hell? The network guy said that I have all the credentials properly entered and that I should be hitting outside throught the proxy. What gives?
Ok, so I got it to half of it to work.
Disabled proxy through CAB
Enter proxy credentials to "My Work Network"
Network adapters>card>"the internet"
SSID>Connects to>"work"
Applications that use internet connect with: My work network
I can connect to the internet outside now, but I cant update my email accounts that are in the outside. Only if I change my SSID to connect to the internet, then email works again, but internet doesnt.
Anyone that has gone through this crap please post something.
Thanks.
Well, I knew it was to soon to scream victory.
It now appears that I have to have IExplorer running in the background to be able to surf through Opera and use Google Maps. If I dont have IE open, then I get prompts from the proxy in Opera and Network problems in G-Maps. This is just too freaking weird. What shagging combination is going to make everything work!?!?!?!?!?!?!
Hi,
Ive setup my Hotmail account using Outlook but it uses a data connection to send/recieve emails, I want it to use the Wifi only as I dont have a data plan.
I cant seem to find a setting anywhere to make it use wifi only. When I click send/recieve my phone automatically makes a data connection :-(
You need to enter Comm Mgr. first, and press Data Connection (not OFF/ON )to enter Set up. press Advanced, then press Select Networks.
Well ,what I going to say is the point. If you don't hava a data plan now, you can choose the two selction with 'My work Network' . Now try again, see if you can use WIFI to send/receive the Email.
When you hava a data plan ,you can switch the first one(Programs automatically connect to the Internet) with 'My ISP'. And when you turn off WIFI, raphael will use the ISP network to send/receive Email automatically.
Hi all, I can connect wirelessly to my router no problem, but if I restart or leave the area, my phone doesn't always reconnect. Then I go back into settings to recheck my WEP key, instead of the 10 digit code I entered, it always has 16. and they are all *'s so I can't tell what else got entered into the box.
Why would the phone add characters? I changed the WEP key a few diffrent times to simple letters, no numbers requiring hitting the FNC key, to make sure it wasn't that. Any ideas?
Thanks!
....Anybody?
I have the WiFi K1. When I'm at work - I can choose 2 different WiFi networks to connect to - 1 is guest access and is unsecured, the other is a secured network which is for employees and their personal devices. Up until today there was no issue. I was able to connect to the secure WiFi network using my ID and password. Yesterday afternoon my password changed. So this morning, I "forget" the network, then reselect it, add my ID and my new password. But the "connect" button stays grayed out and I can't tap it to connect. I went into the reset settings to reset all the network settings - that didn't work.
Anyone have any ideas why the "connect" button is staying grayed out and/or what I can do to try to resolve it? I have a OnePlus 3 cell phone - and that hasn't had an issue - I was able to connect this morning using my new password.
Thanks ..
(originally posted in wrong section .. sorry)