Database Info

arrrg.....mms cannot be had.

First off let me say ive searched this site high and low and tried almost every .cab ive found and followed plenty of setup instructions but still for the life of me cannot get MMS to work. email i get no problems sending texts i get no problems. but no MMS , and i think ive tried everything on this site.... im running Farias WM6 rom , and love it.
I had MMS working on the phone before i had to reflash beacuse i updated a radio rom and it almost bricked it.... so i followed all the instructions again just like usual and reflashed the downgrade rom and then upgraded to farias. I just dont remember what it was i did to get MMS working before
If someone could help me out it would be much appreciated.....
Maybe we could start a sticky entitled " How to get your MMS back after flashing "
Thanks in advance guys.

You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?

kegobeer said:
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
Click to expand...
Click to collapse
Yea , no MMS at all......
cant recieve or send.....
I had it working on the Faria rom before i had to reflash.....
all i keep getting is " error syncronizing " everytime i try to hit " send/recieve"

I had the same issue, go under the MMS settings, then goto server, select Cingular MMS or whoever your carrier is, mine wascingular, and then set it to the default and delete the one named default
If there is not other one besides deafault, then you need to ask your provider for your settings and add it.
hope this helps

This might be helpful to others , but i tried it still no worky for me.
stolen from " Jon " on howard forums
Ah! This sorta illustrates the problem. I had mentioned that I couldn't seem to send MMS, although I *could* browse the web via GPRS.
Well...I spent some time on the phone with T-Mobile "PDA Support" and finally have this figured out! There's been talk here about using the two different APN's available to T-Mobile Internet customers for WAP and MMS versus regular website browsing.
When I spoke with T-Mobile PDA Support, I was told a few things:
1) they've had some network problems that aren't 100% resolved that could be messing up our ability to browse the net, consistently get EDGE speeds, or send MMS messages.
2) MMS is supposed to be sent over their WAP gateway, so for this, you should use "wap.voicestream.com" as your APN.
3) Web browsing for full HTML web pages is supposed to be done over their non-protocol-restricted internet gateway, so for this, you should specify "internet2.voicestream.com" as the APN.
I did some experimenting, and it seems that I cannot send MMS when I connect via "internet2.voicestream.com", and I cannot browse the web when I connect via "wap.voicestream.com". But, as the gentleman from T-Mobile PDA Support suggested, when I chose the APN appropriate to the task, I succeeded. I tried this several times with consistent results.
I think I saw some discussion here about manually selecting the GPRS connection each time so you get the right gateway. But with a bit of configuration work up front, you can make this work automatically. Here's how:
The essence of the solution is that you should have TWO different connection setting groups - one for Internet Browsing and email, and one for MMS. Then, you can have the first one automatically invoked when your application tries to connect to the Internet, and you can have the MMS application automatically select the second connection group when it's trying to send an MMS message.
So -- Most, if not all, of you have a connection group named "T-Mobile GPRS". To examine it, click on:
Start / Settings / Connections and then tap the Connections icon. With the Tasks tab selected, you should see two connection groups listed, along with three choices under each one for tasks you can perform.
Under the connection group named "T-Mobile GPRS", click "Manage existing connections" -- you should be on the "Modem" tab -- if not, select it now.
This page shows a table in which you can list various network connections that this connection group can use to send and receive data. Since it seems that the three APNs that we know about are special purpose (one for WAP/MMS, one for Internet, one for VPN), it does NOT make sense to mix them here and let WM5 try to figure out which is best to use -- you will wind up with inconsistent results (i.e., works sometimes, but not others, seemingly at random).
Instead, since this "T-Mobile GPRS" connection group is for Internet browsing, the one and only connection you want to specify here is one that will use the "internet2" APN.
But first, click on the "Proxy Settings" tab below, and just click the box labeled, "This network connects to the Internet", and make sure the other boxes on the pages are blank (no proxy server specified here!). When you're done, select the "Modem" tab again (you might have to minimize the keyboard display at the bottom to see the tabs).
If you don't have a data connection yet that uses the internet2 APN, you can click on "New", then give it a descriptive name (such as "Internet connection"), select "Cellular Line (GPRS)" as the modem, click "Next", and input "internet2.voicestream.com" as the APN, click "Next" again, leave the user name, password and domain all blank and click "finish".
Click "ok" at the top a couple of times and you should be done with the connection group that gets you to the Internet.
Now - we'll create a separate connection group for MMS:
Go back into "Start / Settings / Connections" and tap the "Connections" icon again. You're back at the "Connections" screen that lists your two most recently defined "connection groups" -- the top one should be "T-Mobile GPRS" since we just worked on it. Click on "Add a new modem connection". Even though this line appears under "T-Mobile GPRS", you'll actually be creating a new and separate connection group.
You'll see a screen entitled, "Make a New Connection". Give it a meaningful name -- I chose "WAP connection". Select "Cellular Line (GPRS)" as the modem, and click "Next". This time, under Access Point Name, specify "wap.voicestream.com". Click next and make sure on the "My Connection" screen that user, password and domain are blank, then click "Finish".
You will now have separate connection groups for Internet Access and for MMS tranmission.
The next step is what makes this work automatically. Close all the windows until you're at the "today" screen again. Click "Start" and then "Messaging". If you don't see "MMS" at the top left of the screen, click the "Menu" button at the lower right, click on "Switch Accounts" and select "MMS".
Click "Menu" again, and then click "MMS Configuration...". You'll see three tabs: "Preferences", "Servers" and "About".
The preferences tab has non-critical choices that you should set to meet your own needs.
On the Servers tab, you should see a single server listed, "T-Mobile MMS" -- this was installed by one of the T-Mobile customizations when you first booted up your MDA. Click on this , and you'll see a screen that details the configurat ion of this server. Here's what you want in the config:
Server Name: non-critical, T-Mobile named it, "T-Mobile MMS", so you should probably leave it at that.
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://215.155.174.84/servlets/mms
...and HERE is where we tell it to automatically switch to our network connection that was set up for MMS:
Where it says, "Connect via:", the default that T-Mobile put in was your old "T-Mobile GPRS" connection. Instead, I clicked the drop-down arrow and selected the new connection that we created way up above that references the "wap.voicestream.com" APN, called something like "MMS Connection".
Sending size limitation as locked at 292k. WAP Version defaults to 2.0, but you can drop it down to 1.2 if you have some reason to do this (I don't).
Once this is all set right, click "OK", and "ok" your way back out of the messaging application.
Now you're ready for a test:
There are many way to initiate an MMS. However you do it, when it starts up, you should see it connecting to GPRS via your "MMS Connection", it will then send your MMS and disconnect from GPRS again after a bit.
Open up PIE again and select a website, and this time you'll see GPRS connecting via your first connection group -- the one that uses "internet2.voicestream.com" as the APN.
You can go back and forth several times -- this setup will select the correct network connection group each time, and work.
The ONLY issue I've seen with this is the following:
If your GPRS connection for one type of activity is still connected when you try launching the other service, it doesn't seem smart enough to force the old connection to disconnect first. So...if your old connection hasn't time out yet, you may have to click on the "G" icon (top of your today screen) and select "disconnect" before starting your other activity. But that's it -- aside from this, all the APN switching is automatic -- and works perfectly.
Click to expand...
Click to collapse

ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent

Data Cab
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace

sYnOnYx said:
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Click to expand...
Click to collapse
sounds like what ever your server settings are, your gateway setting is wrong.

gdribot said:
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
Click to expand...
Click to collapse
Ive tried it 2x already and no worky.......
and now im back to " error syncronizing "
*siigh*

Now its connecting up again , and it connects to (edge) Tmo MMS
but it gets to 66% sent on the status and i get
" next hop connection failed "
Someone just texed me and said " nice pic " so i guess it worked ??
not holding my breath just yet, but praying !

*sigh* *arrrrrrrrrrrrrrrrrrrrrrrgggggg*
now its just connects and disconnects.........
Here are my settings tell me if something is wrong :
Under my MMS configuration ( found from the messaging menu )
Servers :
Sever name : T-mobile MMS
Gateway : 216.155.165.50
Port number : 8080
Sever Address : Http://215.155.174.84/servlets/mms
Connect VIA : T-mobile MMS
And
Settings > Connections > connections Icon
Tmobile MMS then under " manage existing connections "
Name : T-mobile MMS
Select a modem : Cellular line (GPRS)
Access Point name : wap.voicestream.com
Username : blank ( ive tried imputting tmobile in there and nothing still )
password: blank ( ive tried imputting tmobile in there and nothing still )
domain : blank
In the advanced tab under TCP/IP :" use server IP address is selected " and
nothing else is.
under servers on the advanced tab " use server-assigned addresses " is only selected.
any clues ?

back to the "Gateway+timeout" error.... sigh...

i dont know what the hell i did , but its sending messages now.........
still havent recieved one tho.
i think im gonna have to do a writeup tho.

Do you use wifi? When wifi is on my MMS doesn't work.

Did you ever figure out what was happening. I'm having a similar problem. As far as I can tell all the setting you listed above are correct, and I have mine set the same. When I try to send a message it hangs at 87% and never completes. Once it ran up to 99% then I got the "Gateway Timeout" error.

What version of the ARCSoft MMS client are you using?
I cannot get it to send or connect at all unless I use one of the CABs for the settings floating around - then it works, but that causes other NASTY side effects on WM6.

Just the one that came with the rom that I loaded, [02/Nov/2007] TNT.1933, ArcSoft 4.2.8.1 with plug-in and full features. The settings seem to connect, the message just won't complete sending.

I'm not able to get it to connect unless I use the T-Mobile CAB (manually configuring does NOT work) and that breaks data connections when on sync.

Frustrated!! Pocket Internet Explorer doesn't work when cradled

I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.

Hi,
I had the same problem some time ago.
In ActiveSync\File\Connections I had to tick "This computer is connected to: The internet". Now it works.

xunkn0vvnx said:
I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.
Click to expand...
Click to collapse
Change "cellular line" to "cellular line GPRS" from the scroll down box.

The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.

xunkn0vvnx said:
The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.
Click to expand...
Click to collapse
Follow the screen shots in order 1-4. access point: wap.cingular(lower case) User: [email protected](all caps) Password: CINGULAR1 (all caps)
8125
2.25.11.1

Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."

xunkn0vvnx said:
Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."
Click to expand...
Click to collapse
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.

hotdog53 said:
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.
Click to expand...
Click to collapse
One more thing to try: go to your connections settings, tap on advanced (at bottom) select MediaNet from scroll box, tap "proxy" the box that says it uses a proxy to connect should be unchecked (empty) The top box should be checked. You haven't done any internet connection tweaks in the registry have you?

0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.

xunkn0vvnx said:
0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.
Click to expand...
Click to collapse
Sorry man, I don't have the cabs for this fix. I remember reading about someone having the same problems and a cab fix was requested. Can't remember where I read about it. I recommend a forum or google search for the cab fix...I'm pretty sure you'll find what you need.

Ok here is the weird thing... I am running SPB mobile, and when I sync my weather is able to update for New York, NY. Doesn't that mean it must be getting an internet connection through PIE? DOes SPB mobile mess with the registry?

Anybody? Lately I've been using WiFi to update my phone but Id rather have it work when it is cradled.

NEW Touch Pro - Cant view DATA..?

Hi Guys, just receivied my NEW HTC Touch Pro and I must say... WOW! Was very surprised on how small it was. Anyway, put my SIM in (AT&T US) and charged the battery... Powered it up... It decovered my AT&T service and calls & text messages have NOT been a problem however, it says I am connected to EDGE for DATA but for some reason every time I try to set up my exchange, or surf the web under opera it will show the edge symbol connecting and it does get connected but I receive an error under both active sync and opera. IE will try to load a page and just and it will say it is opening the page but then just stop loading with a blank white screen. Could this be a proxy thing..? Has anyone seen or experienced this? I am using the stock ROM from the unlocked unit.
UPDATE: Sorry about that guys... I had to disable the proxy and I know that AT&T had proxy issues in the past but I thought I would need to configue it first in order for the DATA to work. All I did was uncheck the proxy for internet. By unchecking this, does anything else work or not work..?

go the connections tab in settings -> then Connections -> Advance -> Select Networks then on the first dropdown box make sure there is selected a connection that allows a connection to the internet without filtering ports (eg WAP connections filter most ports)
if this does not do any good it may be something with the proxies but there i don't know how to help

Funny, after I disabled the proxy (unchecked proxy for internet) I was able to get DATA thru active sync, youtube, internet, etc... but I still can NOT get the MMS to work. All the MMS settings under the server settings for MMS are correct and it will get to 100% but then just put the message in the out box. It will try to send 2 more times and then I will get an error message that says: Forbidden. Same thing when I try to receive MMS's. I can see the header for the MMS but can't d/l it. Anyone manage to get MMS working in the US..? I did try to configure the proxy under connections but as soon as I check the proxy tab, all data shuts down.

Fuze - VPN to Compnay Network - Remote Desktop Works, Intranet browsing does not

I have the AT&T Fuze with the stock ROM. I purchased it the first day it came out. I think this was 11/11/2008. I have the PDA Personal plan for unlimited data. I have things set up so that my contacts and email synch with our Exchange server. I can remote desktop from my Fuze using the data network to any machine that I can remote to from my computer, so from that, I am thinking VPN must be configured correctly. On one of these machines that I connect to, I have IIS running and put a very simple web page on it (no script, nothing IE specific). From my work computer, it loads fine. I can remote desktop from my Fuze to any machine on the network and launch IE and load it. But, I can't load it directly from my Fuze in either Opera or IE. It does initiate the VPN connection. But, then I get the error HTTP gateway timed out. I'm really not interested in viewing the page that I created. We use Perforce, which is source control system. It has a jobs portion, which we use to track bugs. There is a web interface to the jobs, which is on the intranet, not internet. I don't have rights to remote to the Perforce server, and that is why I initially tried putting a simple page on a machine that i am an admin on. I want to be able to click on a link in my email and have it load the bug in Opera. If I am home and turn on WiFi, and disable the data network, this works fine. This bypasses AT&T's machines, which makes me think there is something that AT&T is blocking. And if they are, then maybe it is the AT&T bloat this is telling them what it is. Our IT guy has verified that I am successfully VPNing in. He is seing the mycingular.net in the firewall.
My boss has the same phone, but purchased more recently, and his is working fine for this. He has flashed the new AT&T test ROM, and done the thing that keeps the AT&T bloat from getting installed.
The fact that remote desktop works, but browsing a webpage on the same machine does not, makes me think there is more to this than just network settings.
If anyone has the anwer to this, please share. If I find the answer, I will post it is well. I have extensively searched the forum for the answer to this, and have not found anything that worked. If I have missed something, I appologize.

Sort of works now, still have an issue
After going to the proxy tab, and checking that This network connects to the Internet and checking the check box that this network uses a porcy server to connect to the internet. Then specify the server. Then go to Advanced and change the HTTP port to 8080 instead of just 80. I also put the user id, password and Domain in on the proxy for HTTP.
But I get prompted for a user id and password from the proxy erveer. I have entered it and clicked the checkbox to save it. It does not display the same info that I entered the next time and it does not display what was entered on the HTTP proxy page. It is a drop down, and I can select the correct one. It's just annoying to need to. I'd like to clear this cache.
Also, to initially get it working I had to disable HSDPA and HSUPA, restart. Then reenable it. I have the registry on my Fuze which give me the menu option on the Advanced network tab to do this.

Figured out how to clear the cache issue - still prompts
The cache was a setting in Opera for passwords.
It still asks for the password. At least it is prefilled with the correct info, since I now only have the one entry, so it is just 1 click, but I should not need to do this step.
Any one know what I need to do to fix this.
If I try to load it in IE, it just tries but never succeeds and never asks for a password, just says Opening.

Connections
Why should I need to set this to connect to the Internet, and use the ISA server? I would think if it needs to connect to the internet, it should be able to just use the Media Net
My Media Net Settings are
Modem -
Name - Modem
Media Net - wap.cingular
Advanced shows the modem in the drop down list as Cellular Line (GPRS, 3G)
The drop down is disabled
Next
Access Point Nam - wap.cingular
Next
User name - [email protected]
don't know what the password is. I've never changed it.
Domain is blank
Next
TPC/IP
Use server - assigned IP address is selected
Use software compression and use IP header compression are checked.
Use slip is not checked and the checkbox is disabled
Servers
Use Servr Assigned addresses is selected
So DN,Alt DNS, WINS, and ALT WINS are disabled.
Proxy Settings
This network connects to the internet
This networks uses a proxy server to connect to the internet is not checked.

More info and additional question
Navigating to some intranet sites does not prompt me for the isa server.
such as http://machine/virtdir/Default.aspx
seems to work without being prompted
but
http://perforcemachine:8080/@md=d&cd=//&[email protected]//?ac=107&mx=25
prompts me for the password.
Also, in order to get either of these links to work, I need to have in my exceptions:
*.companyname.com/*
Where companyname is the actual companyname.
This is annoying because it makes it connect to the VPN when synching with the exchange server. Before I want on the quest to get these links to intranet sites to work, I synched with the exchange server without connecting to the VPN.
I've tried putting in isa.companyname.com in the exceptions, but that doesn't work.
Is there a way to do *.companyname.com/* except mail.companyname.com?
I suspect all of this is in the registry somewhere.

Proxy at work does not work on FUZE

I tried all the options but no avail:
Disabled proxy with builtin cab
Used Advance Config Tool & Diamond Tweak to disable 3g
Increase Power to WIFI
Enter the proxy credentials properly
Select WORK in the connections
I am connected to the network through the WEP key. I have an IP address.
But the thing the intrigues me the most is that I cannot hit outside with Opera or IE unless is the Intranet. BUT, I can hit my comcast email throught the email tabs>inbox>send receive. This email account is from the outside. How the hell? The network guy said that I have all the credentials properly entered and that I should be hitting outside throught the proxy. What gives?

Ok, so I got it to half of it to work.
Disabled proxy through CAB
Enter proxy credentials to "My Work Network"
Network adapters>card>"the internet"
SSID>Connects to>"work"
Applications that use internet connect with: My work network
I can connect to the internet outside now, but I cant update my email accounts that are in the outside. Only if I change my SSID to connect to the internet, then email works again, but internet doesnt.
Anyone that has gone through this crap please post something.
Thanks.

Well, I knew it was to soon to scream victory.
It now appears that I have to have IExplorer running in the background to be able to surf through Opera and use Google Maps. If I dont have IE open, then I get prompts from the proxy in Opera and Network problems in G-Maps. This is just too freaking weird. What shagging combination is going to make everything work!?!?!?!?!?!?!