Hi,
i screwed up my HTC Touch Diamond 2. I uninstalled a program and after that when boot is stuck in an orange screen that says Windows.
I have tried a hard reset holding both - + volume keys and turn on the phone it displays a message exactly like this:
____________________________
Step 3 error while updating :
File operate : File does not exist.
Restart the machine?
___________________________
________________________YES
I tried all the keys but nothing appears to be a YES.
Help! What I can do?
Stevie
Don't panic too much.. just flash a new ROM and you should be fine..
Instructions:
Put a ROM for your Touch Diamond 2 (look in the Touch Diamond ROM Section) onto an EMPTY SD Card. name the ROM topaimg.<cant remember>
Then from there, hold the volume down button and press the red RESET button on the back of the phone. Install the new ROM and it should be okay from there.
How to press yes?
Hi,
Thanks for your help. Your idea seems good but I do not find a way to press the yes that my first screen is demanding.
My HTC is a chinese one that does not have red button.
Thanks
Stevie
That's your problem their! We don't know anything about it because their are so many models out their. The process the member mentioned may not work for yours.
Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.
take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.
I also tried to do that and nothing happens! It just show`s white screen with htc logo.
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.
Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??
no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....
Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike
Take bettery out, then try again
it will work
i tried EVERYTHING! but it dont help
and battery too!
Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.
Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here
DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40
Hi there,
I have HTC Cruise with the following data:
windows mobile 6.1
SPL-3.13.0000
Pola100
CPLD-2
Radio: 1.59.42.15
My OS is win 7 x64
I had a problem in touch screen after I made hard rest to it, it is insensitive....
I can't get into windows mobile because of the setup message " tap the screen to set up windows...."
I can't make HardSPL to that device using Hard-SPL-V2.
It always stuck at zero....
I couldn't return to original ROM, it says Invalid vendor and filed.
I eventually try to use Android in Haret method, I didn't make it coz It indicate you must log in to windows ....
I need a solution to my complex problem.....
I need to know if I can install android on SD without enter to windows or make HardSPL like Live cd in PC windows????
I need specific steps not just links coz I tried search here , and get lost
I appreciate your efforts and thanks in advance
try to hard reset your device To perform a hard reset
1. Power off your device.
2. Press and hold the VOLUME DOWN and ENTER buttons, and then press the POWER button.
The following message then appears on the screen:
HTC Cruise 2 Iolite hard reset
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
if the problem continues take your device into boot loader and flash the original SPL to your device .... hopefully useful and successful for your
to the original SPL HTC Cruise
will do that
I will follow your instructions and inform you by results
I Install winXp SP3 for this issue
let me wait, smartydoctor ! hopefully this time you really work comrade...
Dear All,
I tried to upgrade my HTC Hero from Andriod 1.5 to 2.1 . Everything was OK but last moment Upgradation went failed and Handset automatically shutdown. I tried to powered it up but no fruitfull result. I checked the battery by inserting in some other handset, It was OK. Thats mean there is no issue with battery. Handset doesnt show charging indication while connected to charger. I also tried to power it up in safe mode by pressing combination of keys but no result.
Kindly suggest solutions to power up HTC Hero. Thanks in advance.
is this a cdma hero or gsm hero?
you could try and fastboot usb and run the ruu again
It is GSM HTC HERO.......Please tell me way to do fastboot....Please Help
When I pressed HOME+POWER ON/END CALL button.........There is little vibration.....Nothing else
waiting for reply for some one.....Thanks
When I pressed HOME+POWER ON/END CALL button.........There is little vibration.....Nothing else
waiting for reply for some one.....Thanks
I tried to put handset in fastboot mode but no result...i pressed back+power for fastboot mode..............................waiting for further instruction
Do you get a vibration? If so download fastboot drivers and fastboot files. Try flashing a ROM using fastboot.
Donwload and install this first: http://forum.xda-developers.com/showthread.php?t=1126671
Download and extract these: http://forum.xda-developers.com/showthread.php?t=1055888
After the vibration, open CMD, cd to the folder where you extracted fastboot and type fastboot and then press enter. If you see your device listed in fastboot, download fastboot images for your phone and flash them.
I got vibration when i pressed home+power button.....I didnt get any response from my handset if i pressed back+power and volume down+power button...Please tell me can i do above procedure in this state...............................
Dear Nibras,
I tried the whole procedure but handset didnt power up. I want to explain the issue again to you, Handset doesnt show any thing when I press power button, LCD doesnt glow nor handset vibrate. Its Just like dead phone but when I pressed home+power button, it vibrates.
This Issue came, when I was just tried to upgrade it from Andriod 1.5 to 2.1, this upgradation failed due to some reason and after this handset is not powering up.
When I connected it with PC. PC doesn't recognize any hardware connect to it.
I need your help as my handset is out of warranty.
Thanks and Best Regards,
muqaddas_dunyatv said:
Dear Nibras,
I tried the whole procedure but handset didnt power up. I want to explain the issue again to you, Handset doesnt show any thing when I press power button, LCD doesnt glow nor handset vibrate. Its Just like dead phone but when I pressed home+power button, it vibrates.
This Issue came, when I was just tried to upgrade it from Andriod 1.5 to 2.1, this upgradation failed due to some reason and after this handset is not powering up.
When I connected it with PC. PC doesn't recognize any hardware connect to it.
I need your help as my handset is out of warranty.
Thanks and Best Regards,
Click to expand...
Click to collapse
I don't think I can help anymore. I guess the phone is bricked. Try connecting your handset to another PC and follow the same procedure.
Even if the handset is out of warranty, take it to Service Center and tell them your phone won't power up. Don't tell about the failed upgrade. If they could just reprogram the PCB, let them do it. If they say, they want to change the PCB/motherboard, forget it and get a new phone.
It's sad you waited this long to upgrade to 2.1. You should've done it during the warranty period.
Hello all,
I tried a lot of different procedures to solve my problem.. but nothing.
Diagnostic: Stucked (Semi-Bricked) on HTC Logo. No Restart / Rebook automatically, battery is not charging quickly enough to support the usage (Just display showing HTC Logo), Not able to do the Hard Reset using Volume down, "!" and after the button sequence -> Volume Up, Volume Down, Power (Here is my problem, the screen goes "Black"), Volume Down.
Nothing is working... I tried some ROMs too, but i'm not able to recognize my phone on Windows 7 or 8 for Firmware Update.. aways USB Unknown or something like that.
This is happens after install a kind of "Black List" App, from Microsoft Store.
Anyone has any him about it?
Thanks!
Regards,
Emerson Moraes
Hello Guys!
Any help here?
I'm trying to revive the phone... actually, I think that I need only the Stock ROM to do that. All the ROMS that I've downloaded until now are corrupted (270)...
Any other hyperlink? I'm learning Vietnamese and Russian on my "search"... But Still nothing
Follow my Phone Infos:
HTC 8X C620E 16GB
PM2320001 P S WP8 I
SBL1-1.0.21009.0
SBL2-1.0.21009.0
SBL3-1.0.21009.0
RPM-1.1.03078.0
TZ-303.000.241
UEFI-0.0.3030.0(175731)
OS-4.12.401.01
eMMC SMS 14910MB F-15
CID-HTC__001
Radio-1.20b.32.19.04_15.67b.32.19
MSM8260A v3.2.1-p1 0x707910e1
Krait:Nom Q6:Fast VDDCX:Slow 0x30400
Touch FWS1:1195017,13106,41434467
Vdd_dig - 0.5v, 0x4
Regards,