How to hard reset
Clear Storage does not help because it not start Windows at all
(i ve save some stupid file in Start UP menu)
i cant figure how to hard reset after pressing two buttons and on/off
becase 3-color screen appears
and nothing happened
hELP
and can i again flash it with same ROM (andot PPE) or i must use another
and what is the procedure.
do i have to use SDA unlocker, TeraTermPro, etc etc
on 3-color screen after i done GSMUPDATE
there is message
on ROmUpdate after verifying
it is error
Cant connect to your Smartphone
HEEEEEELP
Just turn off your phone, press both the soft keys and turn it on back
Hi,
Newbie here....A pola200 came to me for password...incoming and outgoing call working..how ever there is a password..wats the best way to remove the password...Or how do i go abt hard resetting it
Thanks in advance
cliffrock
Well as i see there is no one answering me the question....
I found my own solution:
Hard Reset:
On the 02 Orbit2, make sure the phone is powered on and then press AND HOLD the Windows and OK buttons down at the same time, THEN use your stylus to press AND RELEASE the reset button (while you CONTINUE to hold down the Windows and OK buttons). You should get a grey-ish/white screen explaining how to complete the hard reset or how to cancel the operation.
If you cannot see anything on your screen due to the OS being totally messed up (in other words, as long as it's not hardware failure), then you need to put your device into bootloader mode (4-color screen) so that you can flash the ROM (either what you already are using, or a newly cooked one - either way you need to have a ROM image file on your computer to complete the flashing process).
Bootloader Mode:
To enter bootloader mode, press AND HOLD the camera button and then press AND RELEASE the soft reset with your stylus. When the screen is showing the 4 color bands, plug in the USB cable between your computer and phone flash the ROM.
Click to expand...
Click to collapse
Br
cliffrock
Thanks man, working good.
Very thanks
Hi,
i screwed up my HTC Touch Diamond 2. I uninstalled a program and after that when boot is stuck in an orange screen that says Windows.
I have tried a hard reset holding both - + volume keys and turn on the phone it displays a message exactly like this:
____________________________
Step 3 error while updating :
File operate : File does not exist.
Restart the machine?
___________________________
________________________YES
I tried all the keys but nothing appears to be a YES.
Help! What I can do?
Stevie
Don't panic too much.. just flash a new ROM and you should be fine..
Instructions:
Put a ROM for your Touch Diamond 2 (look in the Touch Diamond ROM Section) onto an EMPTY SD Card. name the ROM topaimg.<cant remember>
Then from there, hold the volume down button and press the red RESET button on the back of the phone. Install the new ROM and it should be okay from there.
How to press yes?
Hi,
Thanks for your help. Your idea seems good but I do not find a way to press the yes that my first screen is demanding.
My HTC is a chinese one that does not have red button.
Thanks
Stevie
That's your problem their! We don't know anything about it because their are so many models out their. The process the member mentioned may not work for yours.
Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.
take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.
I also tried to do that and nothing happens! It just show`s white screen with htc logo.
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.
Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??
no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....
Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike
Take bettery out, then try again
it will work
i tried EVERYTHING! but it dont help
and battery too!
Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.
Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here
DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40
Hello. I have a big problem with my HTC Vox, I hope you can help me.
Yesterday I tried to install a new rom on my device. I followed every step, all worked fine. When installing has finished and the device has restarted, appeared a problem. The phone has blocked on the loading process. I can't turn off , the phone doesn't read data cable. I don't know what to do.
I attached a picture to see exactly what i whant to say.
The first boot of a ROM usually takes long as initial setup tasks are executed. Check in the relevant ROM thread if there is anything to take care about.
If even after 15 minutes nothing happens, then try a hard-reset. Switch off (take out battery if needed). Then press and keep holding down both softkeys (L+R) while switching on the device - keep the L+R keys pushed. When the query comes for reset, press the green key.
If you don't succeed, then go back to the original ROM with the standard files from Orange.
Thank you very much. I solved the problem.
And how did you solve it? It may help others with the same problem.
I access boot-loader (Press and hold “Camera + Power” button simultaneously then release the power button first after hold for about 1 seconds, and then the device will enter boot-loader mode.) and then i installed a new rom. I was very simply but for me lasted more to realize how to enter in the boot-loader.
Yes - but this works only with the shipped ROMs - and it will only work for the original one that matches your CID. There is no free CID-Unlock for the VOX, only a CID-bypass with usually a RAM loaded SPL. For that you need to have the OS running to get the SPL loaded there. USPL batchfiles + tools are used for this.
Did you "Hard-SPL" the device first? This means to put the "CID-bypassing" SPL into the ROM? This way you can load any ROM on the VOX in any state of the device (OS up or bootloader).