When recording a new room, the phone disconnected from the active sinc. Now the black screen and green LED lights. Does not a hard reset, you will delete the data confirm and nothing happens. The computer can not find the phone. Is there any assistance.
resolved
I have connected the cable to the PC remove the memory card. He pressed the reset button + media.
Then came the tricolor and the inscription USB.
I ran the program mtty 1.42 "and pressed enter, and entered the" task 2a "to await completion of the process.
Then re-engage disconnected Rest + Media and perform classical flash.
Ps: Active Sync, you choose to disable the USB otherwise this option appears in "mtty 1.42"
I'm happy, that you solved the problem!
Related
When i finish the installation of an corrupted windows files my qteck 9000 can't enter to the bootloader have you any idea about this problem ??? and thanks
Remove the battery for 24 hours.
Re-install the battery, plug in USB data cable and computer connections.
Press and hold: "light button"+"power button" poke and hold the "reset hole. "
If that does not work, try another key combination key + poke hard and hold the "reset hole"; other models such as the brush the wrong ROM, there may be so into the boot mode.
(Automatic translation tools, the general meaning.)
Suspected problem: Bootloop
It all started when I connect my phone (Garmin-Asus A10 (v5.0.82 (updated with GarminAsusPhoneUpdater_Telenor_v2.0.3.exe of denmark))) on laptop through USB cable, the USB slot looks slightly damaged already upon looking at it, after connecting the expected to be happen is that the back-light will turn on, but what happen is that the phone has no response from it, I try to press the power button still no response, I removed the battery and bring it back and try to turn on again the logo appears (without vibrate which is supposed to be present in turning on my phone) then disappear after 7-10 secs.
It's already stock on the logo as I turn it on, the moment I pressed the power button the logo appears for about 7-10 secs then it disappear, also when I removed the battery and put it back the logo appears without pressing anything and disappear again after 7-10 secs.
I try to wipe the data through Volume Up + Volume Down + Power Button the ** WIPE USERDATA ** appears but then after a few secs it disappear again which is supposed to last for about a minutes.
And also I still can go to the **USB POLLING MODE ** through Volume Up + Power Button but seems like there is nothing to do with that thing.
I know it will be easy to fix this with the use of Garmin-Asus phone updater but it requires the phone storage which is so impossible to access at this point.
Hope you guys can help me with this, I badly need that phone.
----
Updates:
I can already open the phone and go to the home screen and menus... etc., but only when I close/cover the 1st metal/copper of the battery (back view (- to +))., but then I get an error saying that "The installed battery is not compatible with this device"
Upon doing this the phone is keep on rebooting, even if I already turn it off it keeps on turning on by itself, also I can't use any network at this point.
I already formatted the phone using master clear & **WIPE USERDATE** (Volume up + power button) still got the same problem.
And also updated with 006-B1243-00.update (The last .update file I used to update my phone (V5.0.82 DN)), upon rebooting after verifying the .update file it just blink twice then the update stops already at that point.
Updates 2:
Physically there is nothing wrong with the phone, I can still use the phone but as I mention already "only when I close/cover the 1st metal/copper of the battery (back view (- to +))." everything works fine except for the error "The installed battery is not compatible with this device" the red with "X" battery (Screenshot-1434948958913)
Also I notice something from my storage the "System Volume Information" (Screenshot-1434949331146, Screenshot-1434949336619, & Screenshot-1434949345666), I'm pretty sure that I haven't seen yet that before, I deleted the folder still it comes back.
Also once I connected my garmin phone to my computer the USB connected thing (Screenshot-1434949876071) don't disappear just until I restarted the phone.
Thanks in Advance.
Hi all
I have an huawei g6-u10 from my friend, he told me that was at school the phone was powered off (by him); when he returned from school, he tryed to power on the phone but it wont start.
Now i have it in my hands and i can confirm it
the phone seems on, if i press once power button green led appear (for a sec)
but the screen is black, completly dead
if i try to push vol down and power off for 15sec it vibs twice and then nothing, again screen black, anything
if i connect the phone to the pc it start automatically Media Partners, so i cant have access to sd card or internal memory
if i digit "adb devices" from c:/adb there are two blank lines and no phone show up
if i go to the device manager in windows, when i connect the phone to the pc it shows two partition with "portable devices" label, named F: and G:
How i can fix it?
Thanks to all
regards
Yesterday in my phone the battery discharged and turned off. Connected to the charger charged up to a few percent, unfortunately I wanted to show something on the phone, I detached it for a moment from the charger and again off. And now the crux of the problem. On the power button zero reaction, I wanted to make a hard reset by VOL- and power button, the phone reacts, the HTC logo pops up, but the menu is no longer (blue flickering screen) so I have no access to this menu. I read about uploading a clean software by RUU, but for this you need to enable fastboot mode or download mode, it is like the option of uploading the software via ruu via the exe file, but unfortunately I can not find it on my model. I will add that after I plug in the phone to the computer still shows information about the unknown device. Any advice, ideas ? I'm fresh on these issues. Sorry for my bad English.
Hi
I have a u11.
last week while i was working with my phone suddenly it hanged and i tried to soft reset.
after that phone showed me blackscreen and nothing happened even i connect phone to the charger and charging led not showing and phone cant power on.
i tried a lot of methods with power and volume buttons but they didnt work.
when i connect phone to the pc it shows qusb_bulk driver or qualcomm hs-usb qdloader 9008
What happened and what can i do?
thanks
same problems
wait for helps
Hi,
I had the exact same problem:
HTC U11 just dropped dead in the middle of a phone call
- Would not turn on again.
- Would not soft-reset (pressing volumeLow + Power button for 10 secs makes the phone vibrate and the screen backlight turn on but the screen remains black).
- Would not charge (screen stays black).
- When connected to a Win10 PC via USB, it is detected as 'qusb_bulk' but no drive is shown
SOLUTION:
I removed the Sim card (not sure if this is even necessary).
Then I opened the phone (see tutorials on youtube etc) and disconnected the battery, then pressed the Power-button (just to make sure the remaining energy is drained). Then reconnect the battery and: it turns on just fine!
cbie said:
Hi,
I had the exact same problem:
HTC U11 just dropped dead in the middle of a phone call
- Would not turn on again.
- Would not soft-reset (pressing volumeLow + Power button for 10 secs makes the phone vibrate and the screen backlight turn on but the screen remains black).
- Would not charge (screen stays black).
- When connected to a Win10 PC via USB, it is detected as 'qusb_bulk' but no drive is shown
SOLUTION:
I removed the Sim card (not sure if this is even necessary).
Then I opened the phone (see tutorials on youtube etc) and disconnected the battery, then pressed the Power-button (just to make sure the remaining energy is drained). Then reconnect the battery and: it turns on just fine!
Click to expand...
Click to collapse
Nothing will happen with this solution, ur problem was different u could just reconnect the battery and ur issue would have been fixed