On the HTC Touch pro 2 in the settings somewhere I tapped commit registry and it said registry flushed. Since I have nothing on my phone really just yet I feel like doing a hard reset after pressing that button.
What does it do? Should I hard reset or not? Is it safe?
Does it change anything in the phone? Does/ can it make the phone run slower (after time maybe, or better?)? Can it make the phone have problems and flaws along with bad performance and instability; can it make the phone not stable? Can it change a certain program or make it worse? How often is the registry to be flushed?
gera229 said:
On the HTC Touch pro 2 in the settings somewhere I tapped commit registry and it said registry flushed. Since I have nothing on my phone really just yet I feel like doing a hard reset after pressing that button.
What does it do? Should I hard reset or not? Is it safe?
Does it change anything in the phone? Does/ can it make the phone run slower (after time maybe, or better?)? Can it make the phone have problems and flaws along with bad performance and instability; can it make the phone not stable? Can it change a certain program or make it worse? How often is the registry to be flushed?
Click to expand...
Click to collapse
no worries, it just writes registry changes from ram to flash. it needs to be done so the changes don't get lost when powering the device off (e.g. battery removed, device rebooted, etc.).
on each suspend it's supposed to flush the registry anyway. but if the program has the option to ask the OS to flush registry that's even better.
Related
Hi guys,
I just recently got hold of an HTC Touch Cruise but the O2 XDA Orbit 2 rebranded version.
Ive been installing a few useful apps on this but some of the changes i make are lost after the phone has beeen switched off and then on!
Examples of this are the "hide sim" reg edit and the PCM keyboard as the default.
I am assuming that maybe the O2 version of WM6 on this is locked to prevent making these changes.
First, if anyone can confirm this or if not tell how me how ot get round this problem i would be grateful.
If this is the case then i would like to flash the phone with an "editable" version of WM6, are these what the ROMS people mention on here are?
If i am right about the ROMS could anyone recommend a good ROM, if they are specific to anything, one that is more finger firendly rather than stylus would be about the only thing i can think of to specify.
I realise this is a bit cheeky asking for all this but i have had a brief of the forum but would perhaps jus tlike a few pointers if anyone can spare the time.
Many thanks
Hi,
If you are turning your phone off by holding the power button then when you turn it on again it will reboot to the ROM image and you will lose all of your installed programs and edits. Try turning it "off" with a brief press on the button, you shouldn't lose anything then. At least I don't.
AFIK the standard O2 ROM allows registry edits, however you cannot edit the ROM contents. You can install apps and they should be persistent unless you do a full power down.
As for the question about ROMs, yes they are customised versions of WM6.1.
You MUST run USPL before trying to re-flash your ROM I suggest you read the upgrading forum there is a sticky there about USPL and loads of other threads about upgrading.
Personally I like ASergs and Bepes ROMs better than most. They are stable and have most of the apps I require.
Hope this helps, Good luck
Neil
Thanks so much for your reply and especially the promptness!!!
When i turn my phone off i have been holding the button at the top, i if i just press it shortly then all it does is powers the screen off. To be honest now i can get away without ever powering off since i charge every night.
If my phone freezes etc should i be using the reset button with the stylus to reboot - will this cause me to lose my edits?
Also if i used one of the customised ROMS is it still the same if i turn the phone completley off that i lose any settings?
I will give the upgrade thread now to gain better understanding, thanks again.
Guide
http://forum.xda-developers.com/showthread.php?t=381600
neila said:
Hi,
If you are turning your phone off by holding the power button then when you turn it on again it will reboot to the ROM image and you will lose all of your installed programs and edits. Try turning it "off" with a brief press on the button, you shouldn't lose anything then. At least I don't.
Neil
Click to expand...
Click to collapse
What?
Turning it off will cause a hard reset or what exactly do you mean?
neila said:
Hi,
If you are turning your phone off by holding the power button then when you turn it on again it will reboot to the ROM image and you will lose all of your installed programs and edits. Try turning it "off" with a brief press on the button, you shouldn't lose anything then. At least I don't.
AFIK the standard O2 ROM allows registry edits, however you cannot edit the ROM contents. You can install apps and they should be persistent unless you do a full power down.
Click to expand...
Click to collapse
I'm sorry to inform you that it should not be behaving that way, and if it does, your phone is most probably broken.
If you mean Hard-Resetting, your phone does not hard-reset when pressing and holding the power button. you'll have to do a combination of other buttons and the soft-reset button to accomplish that.
Oops, Sorry about that! I had total brain failure!
Of course turning the device off by holding the power button does not cause a hard reset.
My apologies for any confusion caused.
Cheers
Neil
Ok, on my device (which is actually an O2 Xda orbit 2, if that makes any difference) When i press the powerbutton once shortly it turns off the screen but all things are still running on the phone eg calls will still come in and alarms, sms etc.
If i press and hold the button the phone switches off completley but then when i turn back on after this i find some stuff has not saved how i expect. Installed apps still remain but things like default keyboard and my hide sim reg change revert.
When you hold down the power button at least on the TC, it asks whether you want to power off, presumably yours isn't asking you and just turns off anyway.
When stuff that you expect to be saved but isn't, like the default keyboard. Do you use sip changer or something like that? If I am using PocketCM keyboard for example and reset my device it defaults back to the Cruise/Diamond keyboard and I have to set PocketCM again. If you use something like a SIP Changer it will set it for you.
So that sounds like configuration things and not necessarily strange behavior.
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
Hi. I have a huge problem. When I press the settings in the Start Menu my phone soft-resets immidiatly.
I dont know why.
As far as I know there is no path to the settings (Like in the windows folder),
But I've tried deleteing and recreating \Windows\Start Menu\Settings.
Nothing works. I dont know if it is some kind of virus or just a bug. Most likely its the registry that is messed up.
I haven't installed any programs on my phone recently and I use the LG KS20.
If I dont get a response quickly I will make a hard reset (If so, I will tell that on this thread).
The only time that this happens is usually when there is a major failure afaik and that you may have deleted a vital file. If you have everything backed up prior to the incident, just hard reset the device and pull up the back-up.
Well, I could't wait anymore without my settings so I made a hard reset,
And it worked.
Most likely the registry had been messed up, But its back to usual now.
Thanks for the help, Everyone who posted of this thread
hard reset is always the most secure solution
When I turn on my device (TP) it ALWAYS asks me to align the screen and to config the calender and time, and also it asks me if I want to put a lock on it. (However the startup video does NOT show)
This is really annoying! Because I hade soft resetting or turning of the device, because I know I need to do that align and configs again!
I've hard reseted my device once, and before I hard resetted my phone, it wasn't like this! Is there a way to turn this of?
Just out of intrest, do you loose any data when you startup. Examples are other Windows settings, contacts, messages, history etc?
sorry, double post
Just to be clear, are you properly aligning the screen? I had to talk a geeky mate of mine through the process. He was briefly tapping the screen and the cursor wasn't moving around the screen as it should. I had to explain that you have to keep the stylus pressed gently on the screen over the little cross until it moves to the next position. Repeat at each position.
Sorry if I'm teaching you to suck eggs.
Uhmm, No I don't loose any data (settings or anything)
Also, yes I align the screen correctly I guess. I do it just as you tell me
But it's like, when you first got the phone, You first installed the WM (I don't) Then you align the screen (This I have to do) Then it asks you to tell it what time it is (This I also got to do every time i turn off and on my device) Then it asks if you want to have a code lock, you can skip or press next to make a lock (This I also have to do, And YES, I have tried to make a password and then just delete it afterwards) Then it tells you to type in PIN code (I also got to do this, but this is nothing I want removed hehe) Then lastly it auto configurated what network you use (For you guys ATT and sprint maybe, I got NetCom - Also this I do NOT have to do)
Please help me! hehe
Really annoying that I need to config this setting each time I restart my Cellphone
Has i always been this way? Have you not had the phone long?
It sounds like you didn't hard reset your phone after you either turned it on for the first time, or flashed a custom ROM.
I bet a hard reset will work, if not then it sounds like a hardware problem. Like back in the old days before WM5 if your battery died, thats it it would wipe. This is because the memory in the phone is volitile. Your phone might not be keeping the settings or supplying enough power.
Try a hard reset first, this usually solves most problems like this
marcd said:
Has i always been this way? Have you not had the phone long?
It sounds like you didn't hard reset your phone after you either turned it on for the first time, or flashed a custom ROM.
I bet a hard reset will work, if not then it sounds like a hardware problem. Like back in the old days before WM5 if your battery died, thats it it would wipe. This is because the memory in the phone is volitile. Your phone might not be keeping the settings or supplying enough power.
Try a hard reset first, this usually solves most problems like this
Click to expand...
Click to collapse
As said, I got this phone for christmas, I turned it on, and had to set it up, I did, and when I restarted the phone I did NOT have to set it ut again!
After 1 month I hard reseted it (Because of a bad program which ruined my dailpad) and now I have to set up the phone EACH TIME I turn it on!! (I do not have to install WM or config the Network)
OK, so I've Hard Reset my device again, works perfectly now!
Hi,
I tweak my HTC touch HD by change certain registry value for performance purpose. I found that, after changed, my mobile would fail to boot (stop at window green screen). I am not sure whether it takes longer time to boot. However, I used to wait for > 10 mins but still retain at same screen.
I got to soft-reset my mobile again by press the red button under the cover. Usually, only the 3rd soft-reset would be successfully. Once boot ok, the subsequence soft-reset would be fine as well.
Question, is behavour normal, by design or any problem to my mobile?
Please advice. Thank you
You have corrupted your registry it sounds like. Change back the keys to what they were before (if you can remeber), else you need to do a hard reset.
joel2009 said:
You have corrupted your registry it sounds like. Change back the keys to what they were before (if you can remeber), else you need to do a hard reset.
Click to expand...
Click to collapse
Hi,
What do you meant by corrupted? If you are refering to wrong key value, then I can say the value it correct. Even though I change back to original, it still need to reboot for 3 times. The key point here is, whenever that is any change to registry, 3 times reboot would be required, 1st time freeze at window splash screen. 2nd time usually freeze at "Loading TF3D ..."
I was thinking whether WM would cache anything during soft-reset if nothing change. If any, then it need to "clean" and reload everything or ...
Any ideas?
Thank you
Corrupted as in the Registry files where not correctly backed up by Windows Mobile. Not your fault perhaps.
Just be sure not to reset to quickly after aplying changes to registry.
and maybe backup and hard reset to maintain functionality