Dear All,
I am new to this (one week old) and I already formatted my pola 100 more than 6 times. I am using the latest froyo RLS16 and Radio 1.65.38.14. Here are my three problems:
1- Because my wifi connection needs a proxy, I cannot sync my contacts and calendar with gmail (big problem). Is there a way to specify a proxy for wifi connections?
2- My GPRS worked (only retrieving gmail messages but not sending or contact/calendar sync) with radio 1.59.44.02 [problem with it is it hangs during phone calls]. I have been looking at many posts and they seem to have a small icon when they are GPRS/HSDP connected. Is there a way to have it working on my 1.65.38.14 radio?
3- In the settings, I cannot control the repetition of ringtones. So, it rings once when I receive a call and that is it. Is there an app that can fix this?
Thanks a lot.
Wasfi
wasfikhatib said:
Dear All,
I am new to this (one week old) and I already formatted my pola 100 more than 6 times. I am using the latest froyo RLS16 and Radio 1.65.38.14. Here are my three problems:
1- Because my wifi connection needs a proxy, I cannot sync my contacts and calendar with gmail (big problem). Is there a way to specify a proxy for wifi connections?
2- My GPRS worked (only retrieving gmail messages but not sending or contact/calendar sync) with radio 1.59.44.02 [problem with it is it hangs during phone calls]. I have been looking at many posts and they seem to have a small icon when they are GPRS/HSDP connected. Is there a way to have it working on my 1.65.38.14 radio?
3- In the settings, I cannot control the repetition of ringtones. So, it rings once when I receive a call and that is it. Is there an app that can fix this?
Thanks a lot.
Wasfi
Click to expand...
Click to collapse
Radio is the cause of the weird ring and call issues. Also, you are using an old build that probabbly does not have those icons. Try using My barebones or scoots build or not so super froyo. As for the proxy settings go, I believe there is a proxy settings menu in the wireless connections menu.
Hi,
Is the radio included in the barebones distribution? If yes, what is its version, and if no, which one do you recommend?
Thanks.
--Wasfi
wasfikhatib said:
Hi,
Is the radio included in the barebones distribution? If yes, what is its version, and if no, which one do you recommend?
Thanks.
--Wasfi
Click to expand...
Click to collapse
It is not as the radio is a seperate file that gets flashed to the polaris. There are guides and info around for it.
My NAND build (2.6.25 kernel + casacristo's RLS18 ROM)
aceoyame said:
It is not as the radio is a seperate file that gets flashed to the polaris. There are guides and info around for it.
Click to expand...
Click to collapse
hello,
i have the same problem with my Polaris 100 and i need a new version
if your version still working, can you give me the link or where can i get that?
i'm using now NAND build (2.6.25 kernel + casacristo's RLS18 ROM)
also i have tried both radios 1.59.44.02 & 1.65.38.14
i'm ugrently waiting your reply.
Atef
Related
old post before the discovery of the reason
I've tried to find an answer in the forum but no luck.
I've installed the new 6.1 with radio 1.64.08.21, but no sms alert sound.
I've changed it with 1.64.06.04 but same result.
Dunno what can I do now...
heeeeeeeeeeeeeeeeeeelp!!!
Thx in advance
Click to expand...
Click to collapse
new post
ok. found. it's NOT a rom problem.
it's a threaded sms problem!!!
I've changed the rom with udk 7.0r2 and, disabling the threaded sms view with:
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Change 1 -> 0 and you'll have the old SMS
the audio/vibr disappears.
AAAAAAAAAAAAAAARGH!!!
how can I DESTROY the threaded mode without losing the alarms???
HELP plz!!!
I can't use the threaded mode because with it neither CSB (CallSMSBlocker) or MagiCall works...
Did you verify that the option to notify by sound is turned on in Settings -> Personal -> Sounds and Notifications ?
Some roms turn the notification off by default.
Have you checked that it's actually enabled to make a sound on SMS?
Settings > Personal > Sound Settings> Notifications Tab; Event: Messaging: New MMS..
i have almost the same problems.
I have activated vibrate and show a pop up message when sms arrives,
but it neighter vibrates nor shows that pop up...
ideas???
skyrysers said:
i have almost the same problems.
I have activated vibrate and show a pop up message when sms arrives,
but it neighter vibrates nor shows that pop up...
ideas???
Click to expand...
Click to collapse
Are you also running Dutty's 6.1 ROM? I would suggest running either KaiserTweak or Schapp's Advanced Configuration tool to make sure there isn't a hidden registry setting preventing the box from popping up.
I know KaiserTweak has an option to hide these notifications, and I myself have turned it on by mistake once or twice.
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
NotATreoFan said:
Are you also running Dutty's 6.1 ROM? I would suggest running either KaiserTweak or Schapp's Advanced Configuration tool to make sure there isn't a hidden registry setting preventing the box from popping up.
I know KaiserTweak has an option to hide these notifications, and I myself have turned it on by mistake once or twice.
Click to expand...
Click to collapse
Nothing found in Schapp's Advanced Configuration....
skyrysers said:
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
Click to expand...
Click to collapse
it works fine for me with this ROM.
I just went to the Sound and Notification settings, go to the New Text Message, and put a checkmark on the Vibrate.
I've been getting all text with Sound and vibrate without problems..
I'm on a ATT Tilt. + RADIO 1.58.21.23
I am also getting MMS fine with this ROM.
do you have used the trick for leave threaded sms?
if is so, return to threaded sms. That trick modify a registy entry that disable the sms account on account selection in mails and the phone don't ring anymore if an sms comes.
skyrysers said:
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
Click to expand...
Click to collapse
Are you using a WM 6.1 compatible radio? I noticed that the radio version listed in your signature is for 6.0, but you also list your ROM as HTC stock, so I'm not sure if your signature is just out of date.
nevermind..... just change your radio to 1.58.26.20.
NotATreoFan said:
Are you using a WM 6.1 compatible radio? I noticed that the radio version listed in your signature is for 6.0, but you also list your ROM as HTC stock, so I'm not sure if your signature is just out of date.
Click to expand...
Click to collapse
yes sry, it wasn't up to date,
I put the newest Radio on it, and tried also an older one, but nothing changed...
And I've changed back to normal SMS, because I don't like this new threadded version... is this the problem?
well... I've tried to setup the sound into the sound config panel but, even with all the options on, the result is the same.
I've not anymore threaded view of sms because CallSMSBlocker (or MagiCall) doesn't work with it, so I'm using normal (old) view.
HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP
leopardone said:
well... I've tried to setup the sound into the sound config panel but, even with all the options on, the result is the same.
I've not anymore threaded view of sms because CallSMSBlocker (or MagiCall) doesn't work with it, so I'm using normal (old) view.
HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP
Click to expand...
Click to collapse
Yep, I nstalled Dutty WM6.1 and no sound since. Thought I did something wrong and all the settings I checked havent helped any. Using radio vers 1.27
Any and all help appreciated
No system sound using Dutty 6.1
Quilombo said:
Yep, I nstalled Dutty WM6.1 and no sound since. Thought I did something wrong and all the settings I checked havent helped any. Using radio vers 1.27
Any and all help appreciated
Click to expand...
Click to collapse
I am in the same boat. I have aboslutely no system sounds at all. I am Running Dutty 6.1 official and upgraded radio to 1.27.12.17 (using on my ATT Tilt in USA). Phone volume is fine, I can make calls and they hear me and I hear them. I just do not have any system sound such as ringtones, playing mp3s, even sliding the keyboard or basic taps on the screen generate nothing.
I will keep looking for some silly tweak/setting that I may have switched, but I do not see it. Anyone else who has this problem and figures this out, please post.
I am too having the same problems with dutty's 6.1 any help would be appreciated
DaMilky said:
I am in the same boat. I have aboslutely no system sounds at all. I am Running Dutty 6.1 official and upgraded radio to 1.27.12.17 (using on my ATT Tilt in USA). Phone volume is fine, I can make calls and they hear me and I hear them. I just do not have any system sound such as ringtones, playing mp3s, even sliding the keyboard or basic taps on the screen generate nothing.
I will keep looking for some silly tweak/setting that I may have switched, but I do not see it. Anyone else who has this problem and figures this out, please post.
Click to expand...
Click to collapse
For starters, always read the first few posts when upgrading to any ROM. The user guide was in post two, and that isn't a recommended radio version.
What radio version do you recommend mine is 1.27.12.11 & do you have a link please. I currently have the kaiser tytn 2.
HEEEEEEELLLLLLPPP MEEEEEEEEE...........i installed dutty 6.1 and my radio is 1.27xxxx, and you guys would believe it........but i too have NO SOUND.
PLEASE HELP ME!!!!! i am unable to read the second post in dutty's thread because my browser is unable to scroll down to the second post!!!! Someone please tell me what to do cause i have no idea what is wrong.
I also have another problem, i cannot seem to tie my shoe laces. if someone can come to my house and do it for me it will be great. If not possible, can one of the cooks make this shoe tying function available in the 6.1 rom. you guys r0x0rzzzzzz the bestest cooks i am sure making a shoe tying function in the rom is so easy you can do it in your sleep.
Radio’s
All of these radio’s work with Dutty’s ROM
Please be advised that each radio will perform differently for each device or corresponding wireless carrier you may have. Note the radio will also have an effect on battery life.
Check here for the official Radio Sticky: http://forum.xda-developers.com/showpost.php?p=1932097&postcount=2
Code:
1.58.26.20
1.64.06.04
1.64.08.21
Straight from Post#2 of the Rom you guys flashed!!!
http://forum.xda-developers.com/showthread.php?t=369505
Hey guys, i've seen a number of different threads which "kind of" talk about this issue. I'm hoping to make this the definitive one. I'm on hour 10 of working to try to get this running..
(My apologies in advance if there is already one out there that i haven't found. i have been really looking and i think i tried it all... im sure thats what everyone says )
Hardware: HTC 8925 a.k.a At&t Tilt a.k.a TyTN II
Software: Duttys Official WM6.1 Release
Radio: 1.64.06.04
Provider: At&t (US)
Problem: BlackBerry Connect's "Identity" Tab reads "PIN: Pending"
I should also mention that i called At&t to confirm (prior to all of this) that i have a BBConnect service plan, it is active, and there is nothing on their end that would indicate a failure of any sorts.
Attempted Fixes (These have ALL failed):
I've tried every combination of having active sync enabled and disabled during bbconnect install.
I hard reseted before every install. Soft reseted after issue still occurred even after bbconnect install rebooted.
All tests were performed with the the HKLM\System\Versions Aku set to .0.4.2 as per Dutty's wiki: (http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser)
I also tried various combinations such as .0.2.0 and .0.3.6 and .0.3.0
Even tired changing Device ID to HTC_P3450
Tried all of the following BBConnect software downloads:
4.0.0.84:
http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90:
http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
Tried installing this one both by copying cab file over to local device and through device web browser:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
I'm installing from and installing to the local device memory, not the storage card..
i think i covered it all... oh, i didnt try the one HEX edit solution, because i didnt think its applicable to dutty's rom..
can ANYONE please help?!
---------------UPDATE--------------------
Okok...so problem solved... i thought i read something similar to this solution somewhere.. but..well whatever... frustrations are over (the problem always seems to find a way to fix itself after you post help for it! )
Process:
1. Hard Reset (set up initial settings, connect to provider, its a total of two reboots iirc)
2. Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
3. Soft Reset
4. Change Device ID to any value (Settings->System->About->Device ID)
5. Soft Reset
6. Install BBConnect 4.0.0.97 via device browser from http://www.america.htc.com/mobile/connect/8925/
7. Installation reboots system
8. Disable 3G connection, force to use EDGE via wireless connection manager
9. Device receives PIN, activates, etc..
10. Enable 3G connection
Notes:
1. So i dont know if items 2,3,4, and 5 were really required.. after preliminary testing, everything works fine with the 3g connection turned on after initial registration.
2. I noticed that the BBConnect Today icon kept showing an exclamation mark indicating its outgoing connection was being blocked. Also the status window kept showing that the connection was suspended by the user, when i never did anything.. so i tired disabling the 3G and sure enough.. problem solved..
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
wooooooooooooooooooot, thx for the solution.
Man...thanks a lot for all the help...it worked like a charm...and i am using it here in dubai...uae where the black berry doestn support the kaiser offically
cheers bro
Great work man, great work for users who uses BBConect
3G still working?
Quick question for those who tried the (disabled 3G to Edge) and then re-enabled 3g.
Does your 3g still work? Have your tried to place calls in 3G mode? I am on my third Tilt, the prior two times I lost 3g after installing blackberry connect, and I want to see if anyone else has this problem, before a try a third time.
Note: On my previous two phones all worked well when I downgraded to GPRS (Edge) as described, but I never got back 3g (even after flashing and removing BBConnect)
elec.two said:
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
Click to expand...
Click to collapse
I added this post to Dutt's WIKI and gave you due credit for your hard work.
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Strange... All I had to do with my Tilt was set the AKU to .0.4.2 or .0.4.4 in the registry before installing the BB Connect software.
I've used the .92 & .97 installers from CAB files on my SD card just fine.
If you change the AKU version after the BB software is installed, it won't work right, as it will still drop the connection. You'll have to reinstall the software.
http://forum.xda-developers.com/showpost.php?p=1903958&postcount=5
Quick Question
So to those of you who have BB Connect running, is all well with your 3G? Thanks for your help, I want to hear a few success stories before a walk down this path again
so I followed the steps, and got everything installed and turned off. I'm trying to get an unlocked tilt on my blackberry account on t-mobile.
The problem is its installed, but the email options are greyed out. We don't use an exchange server (or if we do it is configured very wrong) as I have pop3 information on my t-mobile blackberry page. It says I register successfully on the network, but I still don't receive emails. What do I need to chnage?
edit: fixed - I had to get back online and say yes that I had a new pin.
THANKS!!
lcohen999 said:
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Click to expand...
Click to collapse
that is the same problem I have left now, almost like hardware related.
does AT&T default one can do multiple APNs? as it is officaly support BBC.
I installed Blackberry Connect and I am using it with a Blackberry Enterprise Server.
But I see in order to have the BB icon, the GPRS is always attached. Should it work like this ? I know/knew that with Blackberry phones it attaches to GPRS only when incoming email is coming, and only with Microsoft Directpush technology it stays attached all the time.
If it works like this ( Always On ), is there a difference between BB Connect for WM, and Outlook with Microsoft Direct Push ?
Yours,
Alex
elec.two said:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
Click to expand...
Click to collapse
This link doesn't seem to work, it's actually supposed to be:
http://www.america.htc.com/mobile/connect/8925/index.html
The problem is, when you click "install now" it still can't find the cab. The 4.0.0.97 cab is now mirrored here:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_al_4.0.0.97.cab
desktop manager software
Do you have a link for desktop manager?
I have the version 4.x.17 and cannot connect with the bb on the pda.
I don't know which is the latest or most compatible version for desktop mgr having in consideration what you have in the pda. please, give me some light...
Thanks from a Touch DUAL user....
Thanks Elec.Two
Just added this to the Touch Dual Forum (Nike) as it works a dream for us too!
http://forum.xda-developers.com/showthread.php?t=390284
Has anybody an idea how this will work on a Pharos / HTC P3470? I just tried it described in this taks, but without success.
I had 2 dots and an x
I updated to Dutty's ROM today, and had problems with BBC.
So I searched, found this page and did exacty as told. No luck. Tried again. No luck.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM]
This worked for me. This info is for noobs, of which I am one!
I have just updated my TyTN II to WM6.1 and bbconnect (version 4.0.97) stopped working. Basically it had PIN marked as pending and was reporting no connection.
I have executed only step 2 (change hklm) and 3 (soft reset) from elec.two procedure and it resolved my issue - bbconnect works now. I have not reinstalled the bbconnect.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM
Click to expand...
Click to collapse
Well, I have to thank you on this! I could not get BB Connect to work for the life of me, and your fix finally go t it working!!!
Thanks!
.... and now for the Diamond - same old problem....
Have tried all the known fixes - I think - anyone had any success with bbconnect on the new diamond? Sigh.....
I downloaded and installed the PCMKeyboard 0.18 last night. It is not allowing me to switch on on screen keyboard to the new one. Removed/Uninstalled it. Then noticed this morning me email accounts are not syncronizing. If i connect to the wifi i can sync them, can not thgough 3G or H connection. Any tips to figure out why would be great.
I am using the Tilt/8925, running dutty's WM6.1 WWE rom (which i have been using for months now without any problems). Rom is dated 04/01/08, radio 1.64.08.21, protocol 25.47.40.02H. I can supply any other info to try and help with this issue...very important that my email syncs as i need it for work.
Thank you in advance,
Jim
Hi.
I've searched this forum for a solution to an irritating problem but no luck yet. I'm running Tomal's excellent 8.20 WM6.1 ROM but can't get MMS to work. I've used a variety of versions of ArcsoftMMS but none of them have worked. I've used the Connection Setup wizard to configure my Uni to O2 UK settings. I also tried to setup a 3 sim that I have but still can't get MMS to work. I've manually configured MMS settings for both sims but still no joy.
Can anyone recommend a version of ArcsoftMMS (or any MMS software) that will work with UK sims running Tomal 8.20 or suggest why I'm having problems?
Thanks
Perhaps you could re-flash the ROM and try again... Better still try a better ROM? Tomal had a few since.
enigma1nz said:
Perhaps you could re-flash the ROM and try again... Better still try a better ROM? Tomal had a few since.
Click to expand...
Click to collapse
Thanks for the reply.
I've reflashed a few times and tried on both my Uni's but still doesn't work. I've tried a few later versions of Tomal's ROMs but I need lots of info on my Today screen & prefer to use my device with a stylus rather than my fingers. Was MMS a recognised problem in Tomal 8.20?
Just wondering if there is any version of Arcsoft that works better on UK sims?
saitch76 said:
Thanks for the reply.
I've reflashed a few times and tried on both my Uni's but still doesn't work. I've tried a few later versions of Tomal's ROMs but I need lots of info on my Today screen & prefer to use my device with a stylus rather than my fingers. Was MMS a recognised problem in Tomal 8.20?
Just wondering if there is any version of Arcsoft that works better on UK sims?
Click to expand...
Click to collapse
hey saitch76, since 8.2 released long time back I cannot really remember bugs/drawbacks at the moment. But MMS should work if a working version has installed.
Have you tried the MMS cab I made earlier, it suppose to work. You also need a post configuration i.e. server, gateway setup etc. after the installation.
My recommandation is: install 8.5 or 8.9, they are reported working so try if the MMS is working for you. It should at least shed some light whether it is problem with the config or the rom itself.
cheers
Think that I've found the problem: I can now send and receive MMS but not when connected via Activesync. Don't know if anyone else has noticed this. It's not a major problem for me but it'd be nice if there was a solution.
BTW does anyone have a link for Tomal's MMS cab?
Thanks for your support guys.
http://forum.xda-developers.com/showthread.php?t=342039
Thanks orb3000!
Don´t worry mate
Even searching you can get lost in so many posts
It just hapened the same to me
saitch76 said:
Think that I've found the problem: I can now send and receive MMS but not when connected via Activesync. Don't know if anyone else has noticed this. It's not a major problem for me but it'd be nice if there was a solution.
BTW does anyone have a link for Tomal's MMS cab?
Thanks for your support guys.
Click to expand...
Click to collapse
Did you have 'Allow wireless data connections (such as MMS or Internet Calling) on your device while it's connected to your computer' ticked when AS was initializing? You know, the set up screens you have to go through before the AS synchronizes. If not - disconnect your device, delete the partnership and connect again.
enigma1nz said:
Did you have 'Allow wireless data connections (such as MMS or Internet Calling) on your device while it's connected to your computer' ticked when AS was initializing? You know, the set up screens you have to go through before the AS synchronizes. If not - disconnect your device, delete the partnership and connect again.
Click to expand...
Click to collapse
Thanks! Investigating now...
Thanks for the advice. Works on my XP laptop with Activesync 4.5 but not on my Vista x64 desktop with Windows Mobile Device Center...
Hello,
first of all, sorry for my english (from germany)
it seems that i have some network issues, with my htc one s.
when i'm using facebook, whatsapp etc. it seems to work and everything is fine..
but then it hangs or losts connection and i cant do write or recieve any messages.
the only workaround is to set to flight mode or even reboot the phone.
it does not matter what version of cyanogenmod i'm using.
it seems that the problem fixxes itself by taking time. Example
Sometimes i get 20 messages after 10 minutes by several persons without doing anything. ^^
problems exist with v.10 stable or the latest nightly.
maybe someone can help?
Thanks
Do you mean email messages or txt messages?
Have you checked if data connection is alive when screen is off?
Maybe using default CM10 radio? Have you tried installing EU versio 1.11?
http://forum.xda-developers.com/showthread.php?t=1998270
Only txt messages
Data connection is alive, will try this radio eu.1.11 version, whatever this is.
Thanks
Sent from my HTC One S using xda premium
tried with radio "patch". still same issue.
Did you tried the general workarounds for issues with cm10? (wipe everything, reflash etc.)
is your SIM-card correctly inserted and not damaged?