old post before the discovery of the reason
I've tried to find an answer in the forum but no luck.
I've installed the new 6.1 with radio 1.64.08.21, but no sms alert sound.
I've changed it with 1.64.06.04 but same result.
Dunno what can I do now...
heeeeeeeeeeeeeeeeeeelp!!!
Thx in advance
Click to expand...
Click to collapse
new post
ok. found. it's NOT a rom problem.
it's a threaded sms problem!!!
I've changed the rom with udk 7.0r2 and, disabling the threaded sms view with:
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Change 1 -> 0 and you'll have the old SMS
the audio/vibr disappears.
AAAAAAAAAAAAAAARGH!!!
how can I DESTROY the threaded mode without losing the alarms???
HELP plz!!!
I can't use the threaded mode because with it neither CSB (CallSMSBlocker) or MagiCall works...
Did you verify that the option to notify by sound is turned on in Settings -> Personal -> Sounds and Notifications ?
Some roms turn the notification off by default.
Have you checked that it's actually enabled to make a sound on SMS?
Settings > Personal > Sound Settings> Notifications Tab; Event: Messaging: New MMS..
i have almost the same problems.
I have activated vibrate and show a pop up message when sms arrives,
but it neighter vibrates nor shows that pop up...
ideas???
skyrysers said:
i have almost the same problems.
I have activated vibrate and show a pop up message when sms arrives,
but it neighter vibrates nor shows that pop up...
ideas???
Click to expand...
Click to collapse
Are you also running Dutty's 6.1 ROM? I would suggest running either KaiserTweak or Schapp's Advanced Configuration tool to make sure there isn't a hidden registry setting preventing the box from popping up.
I know KaiserTweak has an option to hide these notifications, and I myself have turned it on by mistake once or twice.
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
NotATreoFan said:
Are you also running Dutty's 6.1 ROM? I would suggest running either KaiserTweak or Schapp's Advanced Configuration tool to make sure there isn't a hidden registry setting preventing the box from popping up.
I know KaiserTweak has an option to hide these notifications, and I myself have turned it on by mistake once or twice.
Click to expand...
Click to collapse
Nothing found in Schapp's Advanced Configuration....
skyrysers said:
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
Click to expand...
Click to collapse
it works fine for me with this ROM.
I just went to the Sound and Notification settings, go to the New Text Message, and put a checkmark on the Vibrate.
I've been getting all text with Sound and vibrate without problems..
I'm on a ATT Tilt. + RADIO 1.58.21.23
I am also getting MMS fine with this ROM.
do you have used the trick for leave threaded sms?
if is so, return to threaded sms. That trick modify a registy entry that disable the sms account on account selection in mails and the phone don't ring anymore if an sms comes.
skyrysers said:
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
Click to expand...
Click to collapse
Are you using a WM 6.1 compatible radio? I noticed that the radio version listed in your signature is for 6.0, but you also list your ROM as HTC stock, so I'm not sure if your signature is just out of date.
nevermind..... just change your radio to 1.58.26.20.
NotATreoFan said:
Are you using a WM 6.1 compatible radio? I noticed that the radio version listed in your signature is for 6.0, but you also list your ROM as HTC stock, so I'm not sure if your signature is just out of date.
Click to expand...
Click to collapse
yes sry, it wasn't up to date,
I put the newest Radio on it, and tried also an older one, but nothing changed...
And I've changed back to normal SMS, because I don't like this new threadded version... is this the problem?
well... I've tried to setup the sound into the sound config panel but, even with all the options on, the result is the same.
I've not anymore threaded view of sms because CallSMSBlocker (or MagiCall) doesn't work with it, so I'm using normal (old) view.
HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP
leopardone said:
well... I've tried to setup the sound into the sound config panel but, even with all the options on, the result is the same.
I've not anymore threaded view of sms because CallSMSBlocker (or MagiCall) doesn't work with it, so I'm using normal (old) view.
HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP
Click to expand...
Click to collapse
Yep, I nstalled Dutty WM6.1 and no sound since. Thought I did something wrong and all the settings I checked havent helped any. Using radio vers 1.27
Any and all help appreciated
No system sound using Dutty 6.1
Quilombo said:
Yep, I nstalled Dutty WM6.1 and no sound since. Thought I did something wrong and all the settings I checked havent helped any. Using radio vers 1.27
Any and all help appreciated
Click to expand...
Click to collapse
I am in the same boat. I have aboslutely no system sounds at all. I am Running Dutty 6.1 official and upgraded radio to 1.27.12.17 (using on my ATT Tilt in USA). Phone volume is fine, I can make calls and they hear me and I hear them. I just do not have any system sound such as ringtones, playing mp3s, even sliding the keyboard or basic taps on the screen generate nothing.
I will keep looking for some silly tweak/setting that I may have switched, but I do not see it. Anyone else who has this problem and figures this out, please post.
I am too having the same problems with dutty's 6.1 any help would be appreciated
DaMilky said:
I am in the same boat. I have aboslutely no system sounds at all. I am Running Dutty 6.1 official and upgraded radio to 1.27.12.17 (using on my ATT Tilt in USA). Phone volume is fine, I can make calls and they hear me and I hear them. I just do not have any system sound such as ringtones, playing mp3s, even sliding the keyboard or basic taps on the screen generate nothing.
I will keep looking for some silly tweak/setting that I may have switched, but I do not see it. Anyone else who has this problem and figures this out, please post.
Click to expand...
Click to collapse
For starters, always read the first few posts when upgrading to any ROM. The user guide was in post two, and that isn't a recommended radio version.
What radio version do you recommend mine is 1.27.12.11 & do you have a link please. I currently have the kaiser tytn 2.
HEEEEEEELLLLLLPPP MEEEEEEEEE...........i installed dutty 6.1 and my radio is 1.27xxxx, and you guys would believe it........but i too have NO SOUND.
PLEASE HELP ME!!!!! i am unable to read the second post in dutty's thread because my browser is unable to scroll down to the second post!!!! Someone please tell me what to do cause i have no idea what is wrong.
I also have another problem, i cannot seem to tie my shoe laces. if someone can come to my house and do it for me it will be great. If not possible, can one of the cooks make this shoe tying function available in the 6.1 rom. you guys r0x0rzzzzzz the bestest cooks i am sure making a shoe tying function in the rom is so easy you can do it in your sleep.
Radio’s
All of these radio’s work with Dutty’s ROM
Please be advised that each radio will perform differently for each device or corresponding wireless carrier you may have. Note the radio will also have an effect on battery life.
Check here for the official Radio Sticky: http://forum.xda-developers.com/showpost.php?p=1932097&postcount=2
Code:
1.58.26.20
1.64.06.04
1.64.08.21
Straight from Post#2 of the Rom you guys flashed!!!
http://forum.xda-developers.com/showthread.php?t=369505
Related
Through four different ROMs (Xplore 1.1, 2.0, and CB RL, currently using 2.0 BB), I've repeatedly had the same issues when everything is loaded and done:
1. In MMS, when trying to Send/Receive, I get an error "Error Synchronizing". Now the messages do seem to go through, if I create one and send it to myself I get the message back, but I'd like to understand why I still get this error.
Q: Is there a "event viewer" or error log that can help identify the issue?
2. Unable to receive emails from Cingular Media Mall to download purchases.
Observation: After requesting the download from the Cingular Media Mall website, the CPU utilization goes up to 30% for a few seconds, then back to 1 or 2%, as if it is seeing an incoming message, but can't accept it? Text messaging seems to work okay, such as *646# or just a phone to phone message.
I've attached the CABs that I've found that set internet / MMS settings, and I've verified them against the Cingular site and what I have on the phone.
I've done as suggested in other threads, to take the newly flashed phone, and before doing anything else, install the MMS and internet settings and try it - but it responds exactly the same.
I've taken the SIM and tried it in my stock 3125, and both work fine, as well with the stock WM5 official rom in the Wizard.
Hmmm...
Just loaded the Crossbow Faria Edition, and the SMS from Cinguar worked. I had gone through the SMS settings a few times, but it sure appears that's where the issue was. I'll dig through the settings to see what's different. There may be hope afterall...
As far as MMS goes, there wasn't a MMS config, so I ran the WAP cab, and tried MMS again. Still the same sync error still came up, though it sent and received is okay.
Same goes on T-Mobile. I seem to receive MMS' just fine but I'm not sure how long ago the person sent it. Last night, it took about 20 minutes to receive the MMS I sent her.
Update
Well, it seems the Faria Crossbow definetly is a step in the right direction, in that now the SMS appears to be working correctly.
There's still a hitch though with the Media Mall though, in that once you click on the link, you get an error message in the browser that says "an unexpected error has occured". Also still haven't nailed the MMS sync error yet.
I still wonder why I bother, but I hate when something doesn't work...
Going to flash back to a more vanilla rom though, too much stuff...
I had this issue as well. the cab files weren't actually installing the mms settings. i had to put them in manually and the sync issue went away.
Gotta be magic...?
Okay, tried Xplore 2.0 again, and still can't get the MMS/SMS settings right. The MMS cab adds the GPRS settings or MEdia and My ISP, but couldn't get SMS working. Arrg!
Starting to feel like this shouldn't be so darn hard, but I went back to the Faria Crossbow rom, which has all the setings included and working. Even tried to cook my own rom, but don't understand enough about adding stuff to get it right.
Maybe there's a way to extract an XML with all of the networks settings for all modems from an existing phone?
i use the p_conn..... cab. I have never had an issue with sms or gprs/edge using this cab. With MMS, i have to set the server info manually.
Have you manually checked to see if an mms server is listed or does it only have a sample server or no server at all?
Are you using My ISP or Media Net as your internet network?
mattk_r said:
Starting to feel like this shouldn't be so darn hard,
Click to expand...
Click to collapse
I honestly don't get it. All I run after flashing is the first cab in your post. MMS, GPRS, and SMS all work for me after that. I don't do anything else. Have you tried to call Cingular to ask them (but not telling them you are on a custom rom of course).
I've used that cab on NTS, Xplore 1.1, Faria Vanilla beta, and now my rom successfully.
btw, what radio are you running? Make sure you are using the Tmo 2.19 UK one with Cingular on WM6.
mfrazzz said:
btw, what radio are you running? Make sure you are using the Tmo 2.19 UK one with Cingular on WM6.
Click to expand...
Click to collapse
It is strange, because I took your advice and tried adding the cab you referenced after a fresh flash, but it only gave me GPRS, but no SMS. (I always do a clear memory after flashing just to be sure before adding/changing anything, including this cab). The only time I've gotten everything is with Faria's Crossbow - which I'm back to currently.
I'm running the 2.19 radio, and it's definetly better than the 2.25 that comes with the factory rom out here.
I've you've got a recipie that seems to work, please pass it on and I'll give it a try. I'm guessing it's the following process-
Reflash back to the official Cingular RUU
Flash the 2.19 TM radio (this seems the only time I can get the loader to work)
Flash the vanilla rom of choice (your remix or Xplore 2.0)
Clear Mem
Install cab
and it should work - or it works for you? These are similar steps to what I've been doing up to going back to Faria's, but maybe I'm missing something.
Hello!
I just upgraded my Wizard to TNT 5.0. However, I am getting this problem that when I try to do delete, skip, or any thing else in my T-Mobile USA voicemail, it would not work. I had this issue before when I unlocked and upgraded my CID but it is still there. I am not using 2.19.11 yet but using 2.25.11. I did some search on this issue but found nothing on the forum.
- TKN
I just fixed the problem. I reflashed the original T-Mobile ROM and then TNT 5.0 and everything is working fine now. I used VMWare with XP to install the ROM before but it crashed several times. That might be the problem.
- TKN
You can also try changing the DTMF or dial tone settings to Long instead of short.
Krazy_Calvin said:
You can also try changing the DTMF or dial tone settings to Long instead of short.
Click to expand...
Click to collapse
Where are these settings located? Thanks in advance.
Settings, phone, sounds, right under the ringtones it says Keypad, change it to long.
Krazy_Calvin said:
Settings, phone, sounds, right under the ringtones it says Keypad, change it to long.
Click to expand...
Click to collapse
Thanks man!
there is a new version for cyberion voice command (2.0)
try the attached, and report
Did anyone get it to work on wm6.1? i install it and it installs, but when i try to go to settings it will not go any farther. I like to have in say whos calling. Its a feature i can't live without! any help would be appreciated!
wolfskin
I think this is a problem when using the "official" 6.1 base. When I load it, it freezes after the install (like when it tries to load the "Help" file) and I must SR the phone. The next boot will be fine until it seems to start the Voice Command program, at which point will freeze the device. I had to hard reset to recover.
Others have reported Dutty's and other 6.1 releases not based on the "official" ROMs work with Voice Command.
i have it installed, haven't noticed any problems or than it needs to be tweaked to anounce calls. all other features, buttons, menus work.
i cant resist this one
READ THE FORUMS
http://forum.xda-developers.com/showthread.php?t=365118&page=6
1.6.1722 works out of the box for me, even launches from the headset. HOWEVER, it totally doesn't recognize ANYTHING I say! Totally the opposite of my normal experience. Normally I have to install ZaJules BTCommand, enable, reset, disable, reset to get the headset launch to work.
Hmm, I'll have to try another version.
***Update***
after radio update it is working PERFECTLY! Also it does seem to make a big difference which minor version of MSVC you're using - 1.6.17913 is what I have, my manager has 1.6.4xxx and his won't work from the headset after trying all my common tricks (although he's on Dutty v4, not 6.1)
Mine works with Schaps...
I am the same way, i must have MSVC for my blutooth carkit...Schaps is the only one i could get it to work well on; however, I din't try it on Dutty's
Just Tested on Alex's WM6.1 Home BETA 2
Works Great.
No problems...works on WM6.1
OK Guys... Do this test... Press and say "play music", it will ask you by saying "what do you want to play?", say "Anything" ( one of the choices), and let me know if it works.
I have dutty V3 and it works fine. On any wm6.1 rom, it will freeze. That is what I am experiencing with VC.
Same Here, no issues (Except the caller id anouncement)
Works fine for wm6.1 and its fine with my parrot carkit actually bluetooth audio much much better now
WM6.1 VoiceCommand 1.6 US
Works fine here - in fact BETTER than with original TYTN release where it would often hang just after hoing the lookup till you hit the Red Phone Key.
Now that it sounds like BT volume is better with 6.1, has anyone taken the time to compare registry settings between WM6 and WM6.1 to see what the differences are?
asking it to play music, and than anything works for me, no issues.
Laubscherc said:
Same Here, no issues (Except the caller id anouncement)
Click to expand...
Click to collapse
Did you go into Settings-Personal-VC and check "announce incoming callers"?
Mine is working completely without any hacks.
In the official 3.03 used in Alex's 6.1 Beta 1, MSVC didn't work for me, crashed the settings.
Now with Alex's Beta 2 he used official 3.02 and MSVC works perfectly.
asfoor said:
OK Guys... Do this test... Press and say "play music", it will ask you by saying "what do you want to play?", say "Anything" ( one of the choices), and let me know if it works.
I have dutty V3 and it works fine. On any wm6.1 rom, it will freeze. That is what I am experiencing with VC.
Click to expand...
Click to collapse
I am experencing the same issue,
I have dutty V4 and it works fine. On any wm6.1 rom, I get the Voice Command.asx error message (The file Voice Command cannot be open. Either it is not signed with a trusuted cerification, or one of it components cannot be. found. If problem persists, try reinstalling orrestoring this file). Ireinstalled several this and soft reset also, but the issue still remain.
Help!
MELPHBOY said:
I am experencing the same issue,
I have dutty V4 and it works fine. On any wm6.1 rom, I get the Voice Command.asx error message (The file Voice Command cannot be open. Either it is not signed with a trusuted cerification, or one of it components cannot be. found. If problem persists, try reinstalling orrestoring this file). Ireinstalled several this and soft reset also, but the issue still remain.
Help!
Click to expand...
Click to collapse
Use Kaiser Tweak in disable the trusted certification.
alltheway said:
Use Kaiser Tweak in disable the trusted certification.
Click to expand...
Click to collapse
Not true....
The Voice Command.asx is NOT part of Kaiser Tweak Menu. There are only two certificates to disable or enable. Even if you were to disable both the WiFi certificate announcement or the BT Certificate announcement, the VC.asx certificate right violation still shows when you request or command the VC, and will not respond to the command.
Did you locate the certificate disable/enable on your phone Kaiser Tweak before you decided to post your response?
Unless you can prove me wrong, I AM WAITING.........
pkley said:
1.6.1722 works out of the box for me, even launches from the headset. HOWEVER, it totally doesn't recognize ANYTHING I say! Totally the opposite of my normal experience. Normally I have to install ZaJules BTCommand, enable, reset, disable, reset to get the headset launch to work.
Hmm, I'll have to try another version.
***Update***
after radio update it is working PERFECTLY! Also it does seem to make a big difference which minor version of MSVC you're using - 1.6.17913 is what I have, my manager has 1.6.4xxx and his won't work from the headset after trying all my common tricks (although he's on Dutty v4, not 6.1)
Click to expand...
Click to collapse
What radio did you upgrade to ? just tried all 3 and still doesnt work for me
Sorry for creating a second thread, but the original was like 175 pages long...
Anyways I tried searching for this but didn't find anything, so if its a dupe question sorry....
I have a problem with the ROM, no incoming calls or outgoing calls are showing up in the call logs.
Also In the Dutty's V4 when I would dial 1111111111 it would dial as (111)-111-1111 but this WM6 does not do that? Same things for the calls i receive.
The only thing I did was restored using PIM. I have tried soft reset. Currently using .21 radio.
Rcommander said:
Sorry for creating a second thread, but the original was like 175 pages long...
Anyways I tried searching for this but didn't find anything, so if its a dupe question sorry....
I have a problem with the ROM, no incoming calls or outgoing calls are showing up in the call logs.
Also In the Dutty's V4 when I would dial 1111111111 it would dial as (111)-111-1111 but this WM6 does not do that? Same things for the calls i receive.
The only thing I did was restored using PIM. I have tried soft reset. Currently using .21 radio.
Click to expand...
Click to collapse
which .21 radio? the kaiser or polaris?
Did you Hard Reset at the "tap to align" screen?
what knid of programs have you installed?
So far noone but you has reported this issue, so I am trying to narrow down some issues that might be causing this.
1.64.08.21 -- Thats my radio. I have not made any changes to the ROM yet what so ever. I mean I have not installed any Applications, Removed or changed anything. Except doing a PIM restore from my backup. No I did not do a hard reset. but I am trying to do one now, and I am on the home screen, holding the keys, but I can't seem to get the "RESET" screen? Also One thing is in NONE of the cooked roms not just this, the Block Caller ID feature isn't working. It does work with the ATT rom.
Well i tried TPC 6.5 v2.1 rom last night and lost the sound on the device.
What the problem seems to be is that when the device starts up all the sounds work, speaker and dialing etc. However after a certain length of time, the sounds just seem to stop working, when i make or receive calls I get nothing and I know it is dialing but I just dont hear anything
So i thought this was a bug in the ROM so i put Anryl 6.5 rom on and it did the same thing.
Any ideas guys?
Thanks
Mike
mikeseaman3000 said:
Well i tried TPC 6.5 v2.1 rom last night and lost the sound on the device.
What the problem seems to be is that when the device starts up all the sounds work, speaker and dialing etc. However after a certain length of time, the sounds just seem to stop working, when i make or receive calls I get nothing and I know it is dialing but I just dont hear anything
So i thought this was a bug in the ROM so i put Anryl 6.5 rom on and it did the same thing.
Any ideas guys?
Thanks
Mike
Click to expand...
Click to collapse
Have you tried a different radio?
Nope, will that help?
Yes, see this wiki page / thread : http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio / http://forum.xda-developers.com/showthread.php?t=393182
Closed as a duplicate, any more problems, please use the Radio thread.
Ta
Dave