Related
hi,
today it happened for the second time: my 750v completely went silent. there was no sound although i had sounds turned on.
the startmenu and all other sounds where completely muted.
i needed to restart my device and the sounds were back again.
strange.
does anyone have the same problem?
Hi, this is a know issue of the Treo. There will be an update available soon
ah, ok. didnt know that
Yeah I have had this issue too. I hard-reset my device and it hasn't happened again. Not sure if it is to do with some application I had installed, but it hasn't happened since.
If there is an update coming I am looking forward to it
Same here
Yeah I have had this a few times before! Oh well I'll just keep an eye on the old updates page on the palm site!
Ho Hum
i had this problem as well... and mine a little bit different, the sound is mute for the ringtone only. it happened for few times. it cant be solve even i soft reset the device! have to hard reset
i use the ringer switch very frequent...
Had the same problem, no sound at all.
Solved: disabled all voice commands, never happened again.
Am on my 3rd Treo as even hard restetting was not solving the problem!
Craig
rmaat said:
Hi, this is a know issue of the Treo. There will be an update available soon
Click to expand...
Click to collapse
Did they fix this problem with the sound? I just got my 750 (unlocked in US - T-Mobile) and the sound is a pain in the nec. Please let me know where I can find the solution. Thank you.
Idem i need to do a soft reset to get sound.
postbus31 said:
Had the same problem, no sound at all.
Solved: disabled all voice commands, never happened again.
Click to expand...
Click to collapse
Same solution worked for me, disable (and stop using. unfortunately) voice command.
I disabled it. Been using it like this for the past 2-3 weeks and the sound issue has not come back.
I have disabled voice command but it doesn't fix the problem, today i missed 7 calls
Palm please fix it with a rom update with wm6 !
How to REMOVE Voice Command from the 750
http://discussion.treocentral.com/showthread.php?t=138317
Disable all voice command settings and that should fix the problem until the WM6 upgrade is available...
old post before the discovery of the reason
I've tried to find an answer in the forum but no luck.
I've installed the new 6.1 with radio 1.64.08.21, but no sms alert sound.
I've changed it with 1.64.06.04 but same result.
Dunno what can I do now...
heeeeeeeeeeeeeeeeeeelp!!!
Thx in advance
Click to expand...
Click to collapse
new post
ok. found. it's NOT a rom problem.
it's a threaded sms problem!!!
I've changed the rom with udk 7.0r2 and, disabling the threaded sms view with:
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Change 1 -> 0 and you'll have the old SMS
the audio/vibr disappears.
AAAAAAAAAAAAAAARGH!!!
how can I DESTROY the threaded mode without losing the alarms???
HELP plz!!!
I can't use the threaded mode because with it neither CSB (CallSMSBlocker) or MagiCall works...
Did you verify that the option to notify by sound is turned on in Settings -> Personal -> Sounds and Notifications ?
Some roms turn the notification off by default.
Have you checked that it's actually enabled to make a sound on SMS?
Settings > Personal > Sound Settings> Notifications Tab; Event: Messaging: New MMS..
i have almost the same problems.
I have activated vibrate and show a pop up message when sms arrives,
but it neighter vibrates nor shows that pop up...
ideas???
skyrysers said:
i have almost the same problems.
I have activated vibrate and show a pop up message when sms arrives,
but it neighter vibrates nor shows that pop up...
ideas???
Click to expand...
Click to collapse
Are you also running Dutty's 6.1 ROM? I would suggest running either KaiserTweak or Schapp's Advanced Configuration tool to make sure there isn't a hidden registry setting preventing the box from popping up.
I know KaiserTweak has an option to hide these notifications, and I myself have turned it on by mistake once or twice.
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
NotATreoFan said:
Are you also running Dutty's 6.1 ROM? I would suggest running either KaiserTweak or Schapp's Advanced Configuration tool to make sure there isn't a hidden registry setting preventing the box from popping up.
I know KaiserTweak has an option to hide these notifications, and I myself have turned it on by mistake once or twice.
Click to expand...
Click to collapse
Nothing found in Schapp's Advanced Configuration....
skyrysers said:
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
Click to expand...
Click to collapse
it works fine for me with this ROM.
I just went to the Sound and Notification settings, go to the New Text Message, and put a checkmark on the Vibrate.
I've been getting all text with Sound and vibrate without problems..
I'm on a ATT Tilt. + RADIO 1.58.21.23
I am also getting MMS fine with this ROM.
do you have used the trick for leave threaded sms?
if is so, return to threaded sms. That trick modify a registy entry that disable the sms account on account selection in mails and the phone don't ring anymore if an sms comes.
skyrysers said:
Yes I'm also running Dutty's 6.1 ROM,
ok, if I find a solution for that it's ok,
but i need the vibration when a new text message arrives...
Click to expand...
Click to collapse
Are you using a WM 6.1 compatible radio? I noticed that the radio version listed in your signature is for 6.0, but you also list your ROM as HTC stock, so I'm not sure if your signature is just out of date.
nevermind..... just change your radio to 1.58.26.20.
NotATreoFan said:
Are you using a WM 6.1 compatible radio? I noticed that the radio version listed in your signature is for 6.0, but you also list your ROM as HTC stock, so I'm not sure if your signature is just out of date.
Click to expand...
Click to collapse
yes sry, it wasn't up to date,
I put the newest Radio on it, and tried also an older one, but nothing changed...
And I've changed back to normal SMS, because I don't like this new threadded version... is this the problem?
well... I've tried to setup the sound into the sound config panel but, even with all the options on, the result is the same.
I've not anymore threaded view of sms because CallSMSBlocker (or MagiCall) doesn't work with it, so I'm using normal (old) view.
HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP
leopardone said:
well... I've tried to setup the sound into the sound config panel but, even with all the options on, the result is the same.
I've not anymore threaded view of sms because CallSMSBlocker (or MagiCall) doesn't work with it, so I'm using normal (old) view.
HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP
Click to expand...
Click to collapse
Yep, I nstalled Dutty WM6.1 and no sound since. Thought I did something wrong and all the settings I checked havent helped any. Using radio vers 1.27
Any and all help appreciated
No system sound using Dutty 6.1
Quilombo said:
Yep, I nstalled Dutty WM6.1 and no sound since. Thought I did something wrong and all the settings I checked havent helped any. Using radio vers 1.27
Any and all help appreciated
Click to expand...
Click to collapse
I am in the same boat. I have aboslutely no system sounds at all. I am Running Dutty 6.1 official and upgraded radio to 1.27.12.17 (using on my ATT Tilt in USA). Phone volume is fine, I can make calls and they hear me and I hear them. I just do not have any system sound such as ringtones, playing mp3s, even sliding the keyboard or basic taps on the screen generate nothing.
I will keep looking for some silly tweak/setting that I may have switched, but I do not see it. Anyone else who has this problem and figures this out, please post.
I am too having the same problems with dutty's 6.1 any help would be appreciated
DaMilky said:
I am in the same boat. I have aboslutely no system sounds at all. I am Running Dutty 6.1 official and upgraded radio to 1.27.12.17 (using on my ATT Tilt in USA). Phone volume is fine, I can make calls and they hear me and I hear them. I just do not have any system sound such as ringtones, playing mp3s, even sliding the keyboard or basic taps on the screen generate nothing.
I will keep looking for some silly tweak/setting that I may have switched, but I do not see it. Anyone else who has this problem and figures this out, please post.
Click to expand...
Click to collapse
For starters, always read the first few posts when upgrading to any ROM. The user guide was in post two, and that isn't a recommended radio version.
What radio version do you recommend mine is 1.27.12.11 & do you have a link please. I currently have the kaiser tytn 2.
HEEEEEEELLLLLLPPP MEEEEEEEEE...........i installed dutty 6.1 and my radio is 1.27xxxx, and you guys would believe it........but i too have NO SOUND.
PLEASE HELP ME!!!!! i am unable to read the second post in dutty's thread because my browser is unable to scroll down to the second post!!!! Someone please tell me what to do cause i have no idea what is wrong.
I also have another problem, i cannot seem to tie my shoe laces. if someone can come to my house and do it for me it will be great. If not possible, can one of the cooks make this shoe tying function available in the 6.1 rom. you guys r0x0rzzzzzz the bestest cooks i am sure making a shoe tying function in the rom is so easy you can do it in your sleep.
Radio’s
All of these radio’s work with Dutty’s ROM
Please be advised that each radio will perform differently for each device or corresponding wireless carrier you may have. Note the radio will also have an effect on battery life.
Check here for the official Radio Sticky: http://forum.xda-developers.com/showpost.php?p=1932097&postcount=2
Code:
1.58.26.20
1.64.06.04
1.64.08.21
Straight from Post#2 of the Rom you guys flashed!!!
http://forum.xda-developers.com/showthread.php?t=369505
When i try to run Voice Commander I get an out of memory error. I am running version 1.6.19209 Anyone else tried this or gotten it to work?
I'm using 1.6.21040.
Gave an error during installation, but seems to be working as far as announcing calls and reading texts.
I have tried to installed version 1.6.21725 and it seems to work fine, but I tried to link to the key virtually using AE Buttons, everything collapsed. The lnk file just got deleted: any suggestion.
How did you guys use to assign to a key?
Was asking the same question. Install worked with one error message. The program works when I start it manually, but I cannot find a way to assign execution to a specific button press. Looking for ideas here.
Toby
i didnt link the button once i got the latest version installed and working. i jsut made a link and put it on the start menu instead and it works great that way
I've switched to 21725 and used aebutton plus to assign it to long press windows key, all works perfectly now.
I dont want to use aebutton plus, so I tried to use the old Long_Send.lnk and had no luck, am I doing something wrong?
or is it a diffrent name in 6.5
MSVC
I got that error too but it has stopped for some reason and now works well.
Version is v1.6.21040
I tried to upload a cab for you but it wouldn't upload.
I use MSVC for text to speech, to announce calls, read emails to me and announce calendar reminders.
This version won't read text msgs.
I don't use it for voice commands, Cyberon Voice Speed Dialer is much better for that.
mallman said:
When i try to run Voice Commander I get an out of memory error. I am running version 1.6.19209 Anyone else tried this or gotten it to work?
Click to expand...
Click to collapse
mallman said:
i didnt link the button once i got the latest version installed and working. i jsut made a link and put it on the start menu instead and it works great that way
Click to expand...
Click to collapse
WHICH LINK DID YOU USE, THE SHORT OR LONG ONE??
Thanks!
I got this error on the stock TP2 ROM as well. For me, it only occurred when I checked the box for announcing WMP selections.
Oh, regarding the MS Voice Command CAB, while it is not the reason the upload failed, XDA does not allow MSVC to be posted in CAB form since it can then be installed on devices that it is not licensed for.
MSVC cab
Oops!
Got it.
NotATreoFan said:
I got this error on the stock TP2 ROM as well. For me, it only occurred when I checked the box for announcing WMP selections.
Oh, regarding the MS Voice Command CAB, while it is not the reason the upload failed, XDA does not allow MSVC to be posted in CAB form since it can then be installed on devices that it is not licensed for.
Click to expand...
Click to collapse
So was anyone able to get MSVC running with a bluetooth headset??
I mean initiating MSVC commands via the headset button and also get the commands itself in the headset?
I cannot get it run like this.
bill340 said:
So was anyone able to get MSVC running with a bluetooth headset??
I mean initiating MSVC commands via the headset button and also get the commands itself in the headset?
I cannot get it run like this.
Click to expand...
Click to collapse
When I start MSVC, the command is repeated through the headset first time then it comes through phone speaker after that. Phone calls are directed through the headset ok. Strange.
I Think I've Found An Answer
If you go into the registry and go to:
\\HKLM\Software\OEM\VoiceCommand
and edit the value for VoiceCmdEnable to 1 (it was set to 0 on my HD2), then soft reset.
Now you should be able to get Voice Command working through BT, at least it's working for me at the moment.
It does not help fo rme at all...
No change!
Which version of MSVC do you use?
I'm not entirely sure, but in the Voice Command settings it shows v1.60.4622.0
weepatc said:
When I start MSVC, the command is repeated through the headset first time then it comes through phone speaker after that. Phone calls are directed through the headset ok. Strange.
Click to expand...
Click to collapse
In my case it is very similar, but when i activate voice command with the assigned button on my HD2 and not via the headset, everthing works as it should. Maby thats a indication how to get it worki`n the right way.
VoiceCommander Working
Hi,
Initially I couldnt get the BT to connect to VC (just got a BT disconnect beep in my ear).
Tried installing 2nd time (over the top), and seemed to 1/2 work but sometimes I would have to say name I wanting to dial through handset - then it would put call through BT - strange.
Finally, I noticed that if the BT headset was on when the phone was switched on (fluke that happened), it worked fine.
If the BT headset is switched on after the phone, it still plays up. Not tried turning BT on handset off and on whilst BT headset turned on yet - something to try tonight I guess.
Note : this only started working a day or so ago so not tested throughly yet.
My VC version is 1.6.4622.0.
I also noticed that on handango - a new VC version is available (updated 20/11/2009) which says works with Touch HD2 - but only USA voice at the mo so I'm waiting for the UK (hopefully released soon).
Hope the above helps.
Looks like I have an old version of Voice Command MSVC1.6.19214. How do I get a later version? Don't see why I should have to pay for it again when it is still 1.6.
Sorry, my bad - not working anymore. Worked for one day, then I get the same as everyone else
I've run into this on multiple ROMs, and every time it seems like it only affects some people. As far as I've been able to find, the common link hasn't been found. It has now, and the fix is incredibly simple.
Settings > Applications > Manage Applications > All > Dialer > Clear Cache
Reboot
Do not restore SMS/MMS/APN Dialer storage data
This was posted in the VaelPak thread, but wanted to get it out there for everyone.
Edit:
I tested this on a fresh install before posting.. both breaking it and then fixing it. But when I restored my broken nand backup, the fix did not work. So mileage may vary, but flashing a fresh install and not restoring the dialer storage should still be a winner.
See post #4 for another confirmed cause and fix
THANKS! Been having this issue since and I didn't feel like searching everywhere for this...until you posted it up here, which made my day a breeze!
Thanks awesome find
There is more to this.
The original cause and solution were both confirmed, but another one has been found. It was caused by a battery mod. So conceivably MMS could be broken by any UI mod that includes /system/framework/framework-res.apk
The good news is, replacing the file with the one that came with your rom should fix MMS after a reboot.
This cause and solution have also both been confirmed. But what about the mod that did it is not known right now.
There seems to be many causes to this problem and seems a fix is based upon each individual and there phone. I see people with this error from a factory ROM and fresh phone. Some issues can also be fixed by un-checking delivery report/read report in messaging settings.
*UPDATE* ~ Possible Fix ~
Not sure if this applies to all but it fixed my problems altogether. In the apn settings there are 2 listed one for Internet and one for MMS. Take the MMSC, MMS Proxy, and the MMS Port settings from the MMS apn and copy those to the internet apn. No need to reset. And don't delete any apn's either.
I can t get this to work
hey can you help me out-I keep flashing unrevoked-forever-son.zip repeatedly and it doesnt work-It keeps saying s-off.I have clockworkmod recovery-I need to turn s-on because i have to take my evo back to a sprint repair shop.my 4g radio got hosed.I must have deleted the keys-I was able to correct my mac address however 4g will still not connect
clownberg said:
hey can you help me out-I keep flashing unrevoked-forever-son.zip repeatedly and it doesnt work-It keeps saying s-off.I have clockworkmod recovery-I need to turn s-on because i have to take my evo back to a sprint repair shop.my 4g radio got hosed.I must have deleted the keys-I was able to correct my mac address however 4g will still not connect
Click to expand...
Click to collapse
Don't worry about it?
This isn't even the right thread for that.
I just returned an Evo, rooted, with a custom ROM on it. They didn't care. The chance of them seeing S-OFF instead of S-ON is pretty much zero.
is this the same problem as
when roaming i am unable to make calls nor connect to the internet. i tried calling and i get this message
"unable to connect, this is an unauthorized devise on the Verizon network...please try your call again........"
I had this issue and it was due to a messed up xml file in system/customize/MNS/default.xml
Unfortunately for me, the only way I fixed it was to hard reset with with the proper edits to the file.
I was learning how to build ROMs and edit certain xml files and I guess I screwed up the syntax of this particular one and ruined my MMS
bluediablito said:
is this the same problem as
when roaming i am unable to make calls nor connect to the internet. i tried calling and i get this message
"unable to connect, this is an unauthorized devise on the Verizon network...please try your call again........"
Click to expand...
Click to collapse
Not the same. Call sprint and tell them you can't make calls while roaming and that you get the verizon message. Tell them you need to repush the network information. That'll fix it quick.
Voicemail problems
Don't know if you guys can help out, but I can't find a thread on this anywhere. My voicemail is not working period. I will call from another phone and leave myself a voicemail. Go to check it and it is no where to be found. I am running fresh 3.2 and kingkernel bfs #9. Any suggestions?
hounie2286 said:
Don't know if you guys can help out, but I can't find a thread on this anywhere. My voicemail is not working period. I will call from another phone and leave myself a voicemail. Go to check it and it is no where to be found. I am running fresh 3.2 and kingkernel bfs #9. Any suggestions?
Click to expand...
Click to collapse
I use Google Voice -- It will replace your current VM system and also sends you emails with your voicemail transcribed into text... give it a shot!
I also use it to ask me to use Google Voice to dial out or allow android to dial...because I hate dialer and if you hit connect/call it immediately dials the first number on the list.. googlevoice at least lets me choose which one I want or none at all.. Its like putting a condom on voice dialer! (Ok, not really, but....)
^ that or youmail. I like youmail because if the phone doesnt ring sometimes (out of reception or if youre on a call sometimes) youmail will send you a email or text showing the missed call. I archive all missed calls/voicemails (for work) so it works out perfectly.
back on topic, I tried deleting the dialer storage, but my mms settings still show some wierd Orange.UK url for the mnsc and i have no idea how that happened. I will try to reflash the rom and see if that fixes it...
Thanks for the suggestion, just got everything setup. Google voice works like a charm.
Hey guys,
This is my first post, and I would greatly appreciate some help. I'm clearly quite a rookie at this. But I rooted my Verizon gs3 quite some time ago, and everything has run smoothly since. I did use it while in the UK on GiffGaff Mobile, and still worked fine. Now I am using Simple Mobile.
Just today, I installed the CyanogenMod 11 KitKat. I am able to send & receive MMS. And I can receive SMS, but I cannot send SMS.
I have tried changing the SMSC number using the dialer, but it keeps reverting back to "+12063130004",145 . I have also tried using different SMSC codes using the GoSMS app. I've played around with the APNs as well, but from the little that I know about this, this only has to do with MMS not SMS, correct?
Don't know what else to do, and I can't find any threads that have helped me yet.
PLEASE help, and I would greatly appreciate it.
amber12129 said:
Hey guys,
This is my first post, and I would greatly appreciate some help. I'm clearly quite a rookie at this. But I rooted my Verizon gs3 quite some time ago, and everything has run smoothly since. I did use it while in the UK on GiffGaff Mobile, and still worked fine. Now I am using Simple Mobile.
Just today, I installed the CyanogenMod 11 KitKat. I am able to send & receive MMS. And I can receive SMS, but I cannot send SMS.
I have tried changing the SMSC number using the dialer, but it keeps reverting back to "+12063130004",145 . I have also tried using different SMSC codes using the GoSMS app. I've played around with the APNs as well, but from the little that I know about this, this only has to do with MMS not SMS, correct?
Don't know what else to do, and I can't find any threads that have helped me yet.
PLEASE help, and I would greatly appreciate it.
Click to expand...
Click to collapse
If you toggle airplane mode or reboot the phone can you send an SMS? I haven't played with my phone at all lately but suddenly similar symptoms have manifested. I can send 1 SMS every time I reboot, but then it stops sending SMS after that one. Is this true with you? I haven't found a fix yet, but I'm trying to flush out the problem completely.
Whisk_33 said:
If you toggle airplane mode or reboot the phone can you send an SMS? I haven't played with my phone at all lately but suddenly similar symptoms have manifested. I can send 1 SMS every time I reboot, but then it stops sending SMS after that one. Is this true with you? I haven't found a fix yet, but I'm trying to flush out the problem completely.
Click to expand...
Click to collapse
I figured it out!! Finally! I had the same issue - I was able to send one message, then suddenly nothing. Do you have Google Voice+ ?? If so, try disabling it. You cannot disable it through the Settings>Apps - you actually have to go into the App then and select disable.
amber12129 said:
I figured it out!! Finally! I had the same issue - I was able to send one message, then suddenly nothing. Do you have Google Voice+ ?? If so, try disabling it. You cannot disable it through the Settings>Apps - you actually have to go into the App then and select disable.
Click to expand...
Click to collapse
I don't see "Google Voice+" Are you referring to Google+ or a different app altogether? This is driving me mad.
mtemlm satisfy
Whisk_33 said:
I don't see "Google Voice+" Are you referring to Google+ or a different app altogether? This is driving me mad.
Click to expand...
Click to collapse
Its just called Voice+. I know, I spent hours trying to sort it out. Other than that and messing around with the SMSC number, I'm not sure what else would be the problem.
amber12129 said:
Its just called Voice+. I know, I spent hours trying to sort it out. Other than that and messing around with the SMSC number, I'm not sure what else would be the problem.
Click to expand...
Click to collapse
So what do you mean by go into the app? if I press menu> manage apps, and then under the tab "All" at the bottom there is a "Voice+". I'm on CM10.2 and it appears that the "Voice+" is part of CM. If I open my app drawer and scroll down there is no app called Voice+.
There is Voice Dialer and Voice Search, but nothing else in the app drawer with a similar name. If I'm not going down the correct path please let me know. Thank you.
Whisk_33 said:
So what do you mean by go into the app? if I press menu> manage apps, and then under the tab "All" at the bottom there is a "Voice+". I'm on CM10.2 and it appears that the "Voice+" is part of CM. If I open my app drawer and scroll down there is no app called Voice+.
There is Voice Dialer and Voice Search, but nothing else in the app drawer with a similar name. If I'm not going down the correct path please let me know. Thank you.
Click to expand...
Click to collapse
Hmm, that's odd that its not showing up in the app drawer. It should be. Do you use Google Voice at all? On my phone, the option to disable or uninstall is blocked when I go into Settings>Apps. But if you don't use the app and your phone allows you to, maybe try disabling and/or uninstalling from there?? Let me know, and I'll keep looking.
amber12129 said:
Hmm, that's odd that its not showing up in the app drawer. It should be. Do you use Google Voice at all? On my phone, the option to disable or uninstall is blocked when I go into Settings>Apps. But if you don't use the app and your phone allows you to, maybe try disabling and/or uninstalling from there?? Let me know, and I'll keep looking.
Click to expand...
Click to collapse
So, I have the option to force stop it. (no change in results).
I've even downloaded the "Google Voice" app, which added the "Voice+" app, opened it, confirmed that it was on disable and still no change.
I have no idea why this problem started this morning since I don't believe I am any changes to my phone the past couple days... I really don't know what information I can provide to help troubleshoot it...
I'm having the same exact problem starting this morning. I can send exactly one message and then I have to reboot or turn airplane mode on/off to send another. Everything was working perfectly fine yesterday, though. I've tried deleting my phone's cache in the recovery menu but it hasn't helped.
thezam said:
I'm having the same exact problem starting this morning. I can send exactly one message and then I have to reboot or turn airplane mode on/off to send another. Everything was working perfectly fine yesterday, though. I've tried deleting my phone's cache in the recovery menu but it hasn't helped.
Click to expand...
Click to collapse
Are you also on CM11? What is your carrier? I've done a factory reset and upgraded from CM10.2 to CM11 and still haven't been able to ride my self from the problem. Nothing I have tried has changed anything. I made a new thread since it seems that the original purpose of this thread has been answered via the disabling of Voice+. The new thread is http://forum.xda-developers.com/showthread.php?t=2657822
Whisk_33 said:
Are you also on CM11? What is your carrier? I've done a factory reset and upgraded from CM10.2 to CM11 and still haven't been able to ride my self from the problem. Nothing I have tried has changed anything. I made a new thread since it seems that the original purpose of this thread has been answered via the disabling of Voice+. The new thread is http://forum.xda-developers.com/showthread.php?t=2657822
Click to expand...
Click to collapse
Carrier: Verizon. I was initially on CM 10.2 but both rolled back to CM 10.1 and upgraded to CM 11 to see if any of those fixed the problem. Neither did and I reluctantly (for now at least) went back to stock and unrooted my phone. Texting is working fine but I absolutely hate TouchWiz. I have no idea what could have caused the issue and, like you, I didn't make any changes at all before it happened. It literally appeared out of the blue.
thezam said:
Carrier: Verizon. I was initially on CM 10.2 but both rolled back to CM 10.1 and upgraded to CM 11 to see if any of those fixed the problem. Neither did and I reluctantly (for now at least) went back to stock and unrooted my phone. Texting is working fine but I absolutely hate TouchWiz. I have no idea what could have caused the issue and, like you, I didn't make any changes at all before it happened. It literally appeared out of the blue.
Click to expand...
Click to collapse
A bunch of us on S4s seem to be having the same problem! The timing of this issue all happening at once is weird... http://forum.xda-developers.com/showthread.php?p=50552025
OK this really does seem to work for me as a temp workaround...it sticks through reboots and all. Go to the dialer and enter the trusty old *#*#4636#*#* then go to phone settings and change preferred network type to CDMA only then back out and reboot.
It kinda sucks cause it's slow on the go, but at least I can send texts reliably. I have WiFi most places I am anyway.
If anyone figures out a real long term fix please post!!!
amber12129 said:
Hey guys,
This is my first post, and I would greatly appreciate some help. I'm clearly quite a rookie at this. But I rooted my Verizon gs3 quite some time ago, and everything has run smoothly since. I did use it while in the UK on GiffGaff Mobile, and still worked fine. Now I am using Simple Mobile.
Just today, I installed the CyanogenMod 11 KitKat. I am able to send & receive MMS. And I can receive SMS, but I cannot send SMS.
I have tried changing the SMSC number using the dialer, but it keeps reverting back to "+12063130004",145 . I have also tried using different SMSC codes using the GoSMS app. I've played around with the APNs as well, but from the little that I know about this, this only has to do with MMS not SMS, correct?
Don't know what else to do, and I can't find any threads that have helped me yet.
PLEASE help, and I would greatly appreciate it.
Click to expand...
Click to collapse
i just installed cm 11 yesterday and i am having same problem you have, i am on simple mobile too please what did you do, to fix it, thank in advance...
gagnier27 said:
i just installed cm 11 yesterday and i am having same problem you have, i am on simple mobile too please what did you do, to fix it, thank in advance...
Click to expand...
Click to collapse
sorry for such a late response. I solved this by just disabling Google Voice+. It is just called Voice+ in the app drawer, and when you open it, just tap 'Disable' & reboot the device.
amber12129 said:
sorry for such a late response. I solved this by just disabling Google Voice+. It is just called Voice+ in the app drawer, and when you open it, just tap 'Disable' & reboot the device.
Click to expand...
Click to collapse
Some people don't have voice+ and the solution you used isn't an option for them.
For those of us less fortunate than you, It seems you can fix the problem by loading a TW ROM and flashing the MB1 firmware. Then you can return to CM
I had XVoice+ for Exposed on my SGS4, it stopped me from sending texts. It was ok when i uninstalled it. I hope that might help.