Hi.
I've searched this forum for a solution to an irritating problem but no luck yet. I'm running Tomal's excellent 8.20 WM6.1 ROM but can't get MMS to work. I've used a variety of versions of ArcsoftMMS but none of them have worked. I've used the Connection Setup wizard to configure my Uni to O2 UK settings. I also tried to setup a 3 sim that I have but still can't get MMS to work. I've manually configured MMS settings for both sims but still no joy.
Can anyone recommend a version of ArcsoftMMS (or any MMS software) that will work with UK sims running Tomal 8.20 or suggest why I'm having problems?
Thanks
Perhaps you could re-flash the ROM and try again... Better still try a better ROM? Tomal had a few since.
enigma1nz said:
Perhaps you could re-flash the ROM and try again... Better still try a better ROM? Tomal had a few since.
Click to expand...
Click to collapse
Thanks for the reply.
I've reflashed a few times and tried on both my Uni's but still doesn't work. I've tried a few later versions of Tomal's ROMs but I need lots of info on my Today screen & prefer to use my device with a stylus rather than my fingers. Was MMS a recognised problem in Tomal 8.20?
Just wondering if there is any version of Arcsoft that works better on UK sims?
saitch76 said:
Thanks for the reply.
I've reflashed a few times and tried on both my Uni's but still doesn't work. I've tried a few later versions of Tomal's ROMs but I need lots of info on my Today screen & prefer to use my device with a stylus rather than my fingers. Was MMS a recognised problem in Tomal 8.20?
Just wondering if there is any version of Arcsoft that works better on UK sims?
Click to expand...
Click to collapse
hey saitch76, since 8.2 released long time back I cannot really remember bugs/drawbacks at the moment. But MMS should work if a working version has installed.
Have you tried the MMS cab I made earlier, it suppose to work. You also need a post configuration i.e. server, gateway setup etc. after the installation.
My recommandation is: install 8.5 or 8.9, they are reported working so try if the MMS is working for you. It should at least shed some light whether it is problem with the config or the rom itself.
cheers
Think that I've found the problem: I can now send and receive MMS but not when connected via Activesync. Don't know if anyone else has noticed this. It's not a major problem for me but it'd be nice if there was a solution.
BTW does anyone have a link for Tomal's MMS cab?
Thanks for your support guys.
http://forum.xda-developers.com/showthread.php?t=342039
Thanks orb3000!
Don´t worry mate
Even searching you can get lost in so many posts
It just hapened the same to me
saitch76 said:
Think that I've found the problem: I can now send and receive MMS but not when connected via Activesync. Don't know if anyone else has noticed this. It's not a major problem for me but it'd be nice if there was a solution.
BTW does anyone have a link for Tomal's MMS cab?
Thanks for your support guys.
Click to expand...
Click to collapse
Did you have 'Allow wireless data connections (such as MMS or Internet Calling) on your device while it's connected to your computer' ticked when AS was initializing? You know, the set up screens you have to go through before the AS synchronizes. If not - disconnect your device, delete the partnership and connect again.
enigma1nz said:
Did you have 'Allow wireless data connections (such as MMS or Internet Calling) on your device while it's connected to your computer' ticked when AS was initializing? You know, the set up screens you have to go through before the AS synchronizes. If not - disconnect your device, delete the partnership and connect again.
Click to expand...
Click to collapse
Thanks! Investigating now...
Thanks for the advice. Works on my XP laptop with Activesync 4.5 but not on my Vista x64 desktop with Windows Mobile Device Center...
Related
Interesting development here... Since upgrading to WM6, I'm not able to access any pages using IE over my AT&T connections. I'm able to access pages using IE through my wireless network just fine. I've also had this problem with AKU 3.3 as well. This did not start until two or three weeks ago. I've made no major changes to either ROM. The AKU 3.3 ROM I was using was absolutely flawless for several weeks, and even activated the stock extended ROM. Using AKU 2.2, there isn't a problem in the world. I'm wondering if this isn't something on AT&T's end.
I may have found a possible issue using G'reloc when cooking some ROM's. Further research is needed.
Well, it seems like it's still not working even when cooked without G'Reloc.
This is driving me nuts, because I'm not sure if it needs a cab or what.
Can anyone help here?
Try switing to another ROM to diagnosis...
I had this same problem but decided to bounce to another ROM. I went with TNT and it is now working again. I have an AT&T Blue SIM card. I can't find the reference now, but someone else was experiencing the same exact problem with IE and the blue SIM card. Hope this helps.
jwzg said:
Interesting development here... Since upgrading to WM6, I'm not able to access any pages using IE over my AT&T connections. I'm able to access pages using IE through my wireless network just fine. I've also had this problem with AKU 3.3 as well. This did not start until two or three weeks ago. I've made no major changes to either ROM. The AKU 3.3 ROM I was using was absolutely flawless for several weeks, and even activated the stock extended ROM. Using AKU 2.2, there isn't a problem in the world. I'm wondering if this isn't something on AT&T's end.
Click to expand...
Click to collapse
Did you change location of cache or temp files? I think it happened to me one time, and i go the file location messed up...(dont remember for sure)
outlook not working
im att also, just upgraded to tnt pro the 1622 version or whatnot. pie works great for me but my outlook gmail accounts aren't working. anytime I send or receive I get an error syncronizing message at the bottom of the screen. oddly 1 day last week my email DID come in. why? I dunno. I get my att internet settings from a mfrazzz cingular settings cab. I've tried changin the network used from medianet to my isp, as I think that helped using mobile 5. but I still get the same error message, this is the only device I have and I need my email. any help would be greatly appreciated. oh yeh I just moved too if that makes a difference, the edge service is spottier but its still an edge connection not the slower one.
does your ROM include the networkwizard? If not, do AT&T not use a proxy via the GPRS?
No, it does not contain network wizard. I'd like to know who is running a 15342 based ROM that is also accessing the Cingular/AT&T network, and if they are having issues.
it works fine for me, no problem for my cooked ROM!
cgigate said:
it works fine for me, no problem for my cooked ROM!
Click to expand...
Click to collapse
Through AT&T?
Works fine for me
I am running XDA Mobile 6 rev 3 and IE is working fine through ATT.
Guys,
I believe WM6.1 has new network drivers, does anyone know if its possible to use these on WM6?
What advantages would it have or does having new drivers have?
I don't know if it has any benefit but I'm struggling with an issue regarding wifi connectivity and just wondered if it would be worth trying them to see if they resolve the problem.
Not wanting to flash the WM6.1 roms yet I wondered if the could be posted here for me to try them.
Maybe I'll just have to be patient and wait for 6.1 to settle in
foobar1977 said:
I don't know if it has any benefit but I'm struggling with an issue regarding wifi connectivity and just wondered if it would be worth trying them to see if they resolve the problem.
Not wanting to flash the WM6.1 roms yet I wondered if the could be posted here for me to try them.
Maybe I'll just have to be patient and wait for 6.1 to settle in
Click to expand...
Click to collapse
Hello,
what kind of issue is that?
I'm having a problem with the http proxy settings that are being deleted all the time.
I've posted on this forum about this and seems that are other people with the same problem.
If this is your problem, don't bother flashing WM6.1 roms. I've tried almost all of them and none solves the problem.
I have the HTTP Proxy settings problem too, and nothing seems to fix it.. horrible if this simplest thing can't be done I can't use WAP, college proxy, or work proxy.. damn
SMRocket said:
Hello,
what kind of issue is that?
I'm having a problem with the http proxy settings that are being deleted all the time.
I've posted on this forum about this and seems that are other people with the same problem.
If this is your problem, don't bother flashing WM6.1 roms. I've tried almost all of them and none solves the problem.
Click to expand...
Click to collapse
I don't have that problem. Mine is an issue connecting to access points after the phone has been suspended for a while (see http://forum.xda-developers.com/showthread.php?t=366526 if you are interested).
The proxy problem is fixed in 6.1 I have tested it and it does keep the proxy now. Hurraaaaayyy that was one huge problem for me. Still having some issues connecting to the internet. But a few more atempts and I should have some success.
Arlop said:
The proxy problem is fixed in 6.1 I have tested it and it does keep the proxy now. Hurraaaaayyy that was one huge problem for me. Still having some issues connecting to the internet. But a few more atempts and I should have some success.
Click to expand...
Click to collapse
Yes, I have installed DC1.5 version and it really saves the proxy settings. But it seems that internet explorer and htc weather are not reading this settings!!!
Any idea?
Thanks in advance.
I seem to be having the same issue as above. The Proxy settings stay but IE wont use them. Ideas?
No progress..
Arlop said:
I seem to be having the same issue as above. The Proxy settings stay but IE wont use them. Ideas?
Click to expand...
Click to collapse
I've placed my TyTNII for sale. I'm tired of flashing roms for trying to fix this issue.
I'm with ya.
Hey guys, i've seen a number of different threads which "kind of" talk about this issue. I'm hoping to make this the definitive one. I'm on hour 10 of working to try to get this running..
(My apologies in advance if there is already one out there that i haven't found. i have been really looking and i think i tried it all... im sure thats what everyone says )
Hardware: HTC 8925 a.k.a At&t Tilt a.k.a TyTN II
Software: Duttys Official WM6.1 Release
Radio: 1.64.06.04
Provider: At&t (US)
Problem: BlackBerry Connect's "Identity" Tab reads "PIN: Pending"
I should also mention that i called At&t to confirm (prior to all of this) that i have a BBConnect service plan, it is active, and there is nothing on their end that would indicate a failure of any sorts.
Attempted Fixes (These have ALL failed):
I've tried every combination of having active sync enabled and disabled during bbconnect install.
I hard reseted before every install. Soft reseted after issue still occurred even after bbconnect install rebooted.
All tests were performed with the the HKLM\System\Versions Aku set to .0.4.2 as per Dutty's wiki: (http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser)
I also tried various combinations such as .0.2.0 and .0.3.6 and .0.3.0
Even tired changing Device ID to HTC_P3450
Tried all of the following BBConnect software downloads:
4.0.0.84:
http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90:
http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
Tried installing this one both by copying cab file over to local device and through device web browser:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
I'm installing from and installing to the local device memory, not the storage card..
i think i covered it all... oh, i didnt try the one HEX edit solution, because i didnt think its applicable to dutty's rom..
can ANYONE please help?!
---------------UPDATE--------------------
Okok...so problem solved... i thought i read something similar to this solution somewhere.. but..well whatever... frustrations are over (the problem always seems to find a way to fix itself after you post help for it! )
Process:
1. Hard Reset (set up initial settings, connect to provider, its a total of two reboots iirc)
2. Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
3. Soft Reset
4. Change Device ID to any value (Settings->System->About->Device ID)
5. Soft Reset
6. Install BBConnect 4.0.0.97 via device browser from http://www.america.htc.com/mobile/connect/8925/
7. Installation reboots system
8. Disable 3G connection, force to use EDGE via wireless connection manager
9. Device receives PIN, activates, etc..
10. Enable 3G connection
Notes:
1. So i dont know if items 2,3,4, and 5 were really required.. after preliminary testing, everything works fine with the 3g connection turned on after initial registration.
2. I noticed that the BBConnect Today icon kept showing an exclamation mark indicating its outgoing connection was being blocked. Also the status window kept showing that the connection was suspended by the user, when i never did anything.. so i tired disabling the 3G and sure enough.. problem solved..
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
wooooooooooooooooooot, thx for the solution.
Man...thanks a lot for all the help...it worked like a charm...and i am using it here in dubai...uae where the black berry doestn support the kaiser offically
cheers bro
Great work man, great work for users who uses BBConect
3G still working?
Quick question for those who tried the (disabled 3G to Edge) and then re-enabled 3g.
Does your 3g still work? Have your tried to place calls in 3G mode? I am on my third Tilt, the prior two times I lost 3g after installing blackberry connect, and I want to see if anyone else has this problem, before a try a third time.
Note: On my previous two phones all worked well when I downgraded to GPRS (Edge) as described, but I never got back 3g (even after flashing and removing BBConnect)
elec.two said:
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
Click to expand...
Click to collapse
I added this post to Dutt's WIKI and gave you due credit for your hard work.
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Strange... All I had to do with my Tilt was set the AKU to .0.4.2 or .0.4.4 in the registry before installing the BB Connect software.
I've used the .92 & .97 installers from CAB files on my SD card just fine.
If you change the AKU version after the BB software is installed, it won't work right, as it will still drop the connection. You'll have to reinstall the software.
http://forum.xda-developers.com/showpost.php?p=1903958&postcount=5
Quick Question
So to those of you who have BB Connect running, is all well with your 3G? Thanks for your help, I want to hear a few success stories before a walk down this path again
so I followed the steps, and got everything installed and turned off. I'm trying to get an unlocked tilt on my blackberry account on t-mobile.
The problem is its installed, but the email options are greyed out. We don't use an exchange server (or if we do it is configured very wrong) as I have pop3 information on my t-mobile blackberry page. It says I register successfully on the network, but I still don't receive emails. What do I need to chnage?
edit: fixed - I had to get back online and say yes that I had a new pin.
THANKS!!
lcohen999 said:
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Click to expand...
Click to collapse
that is the same problem I have left now, almost like hardware related.
does AT&T default one can do multiple APNs? as it is officaly support BBC.
I installed Blackberry Connect and I am using it with a Blackberry Enterprise Server.
But I see in order to have the BB icon, the GPRS is always attached. Should it work like this ? I know/knew that with Blackberry phones it attaches to GPRS only when incoming email is coming, and only with Microsoft Directpush technology it stays attached all the time.
If it works like this ( Always On ), is there a difference between BB Connect for WM, and Outlook with Microsoft Direct Push ?
Yours,
Alex
elec.two said:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
Click to expand...
Click to collapse
This link doesn't seem to work, it's actually supposed to be:
http://www.america.htc.com/mobile/connect/8925/index.html
The problem is, when you click "install now" it still can't find the cab. The 4.0.0.97 cab is now mirrored here:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_al_4.0.0.97.cab
desktop manager software
Do you have a link for desktop manager?
I have the version 4.x.17 and cannot connect with the bb on the pda.
I don't know which is the latest or most compatible version for desktop mgr having in consideration what you have in the pda. please, give me some light...
Thanks from a Touch DUAL user....
Thanks Elec.Two
Just added this to the Touch Dual Forum (Nike) as it works a dream for us too!
http://forum.xda-developers.com/showthread.php?t=390284
Has anybody an idea how this will work on a Pharos / HTC P3470? I just tried it described in this taks, but without success.
I had 2 dots and an x
I updated to Dutty's ROM today, and had problems with BBC.
So I searched, found this page and did exacty as told. No luck. Tried again. No luck.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM]
This worked for me. This info is for noobs, of which I am one!
I have just updated my TyTN II to WM6.1 and bbconnect (version 4.0.97) stopped working. Basically it had PIN marked as pending and was reporting no connection.
I have executed only step 2 (change hklm) and 3 (soft reset) from elec.two procedure and it resolved my issue - bbconnect works now. I have not reinstalled the bbconnect.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM
Click to expand...
Click to collapse
Well, I have to thank you on this! I could not get BB Connect to work for the life of me, and your fix finally go t it working!!!
Thanks!
.... and now for the Diamond - same old problem....
Have tried all the known fixes - I think - anyone had any success with bbconnect on the new diamond? Sigh.....
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
afeudale said:
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
Click to expand...
Click to collapse
I have a bit different problem, but seems like yours.. sometimes, it doesnt try to connect, no failure message, but no try, my resolution is having spb gprs monitor, which i ever used, even i had this problem... in this case, only click connect and everything is ok... sometimes it doesnt connect or says message like yours on my other HTC XDAs (9000,9100....) but spb solved it everytime...
aaischa, I tried SPB but no luck...
Interestingly, I tried downgrading to WM5 and it works fine with that...
Anyone else having this problem?
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
afeudale said:
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
Click to expand...
Click to collapse
thanks, I had e the same problem
if only connect.mscr could run by itself
It would be great if connect.mscr could run when ever our treo's with hermes radios lost service. Mine with 154.07.00 once it looses service completely will not reconnect. If this script could run when the unit is not connected say every 10 minutes or so life would be good.
I have the same problem. Running 6.1 on the Telecom XT network in New Zealand...simply going into connections (as it says in the first post) and not doing anything solves it, but it is annoying. Any better solutions?
Radio: 1.56.70.11
ROM: WM6.1 (Treo750_OS5_2_19199WWE_STD)
Dear All Guru....
I currently purchase Imate 9502, everything runs well until I found out that it's can't send MMS ???And Can't use 3G, or even GPRS???But can send SMS.
So i try to change the SIM card to other Service Provider, it become even worse, All MMS,GPRS,3G and SMS. all Fall to the earth all seems not to be fuction well....
I wonder any1 having this problems????
The phone is GREAT but this issues seem to bother me more and more
Thank you for helping.
Is it i have to get another Phone??? hauhua.... which i hate to do it ^^
Nobody purchase this phone/?? or only me having the problems??
hi, first of all, I would like to ask you to : please....flash the ROM using the latest WM6.1 official ROM from the imate website...I think that WILL FIX ur problem...I use imate9502, and this device is really ultimate for me
Yes the unit is working fine and good, just the problem is the Messaging and internet feature.
I do flash to 6.1 version 1.73 and curretly use 1.77 (official) still same result. i don't know what is the problem even imate personell also haven't gv me any new since 2 months ago
I go to registry but still can't find any hint
The setting for the MMS,GPRS, all already correct ( using manual and imate configurator ) no hope also.
h9s said:
Yes the unit is working fine and good, just the problem is the Messaging and internet feature.
I do flash to 6.1 version 1.73 and curretly use 1.77 (official) still same result. i don't know what is the problem even imate personell also haven't gv me any new since 2 months ago
I go to registry but still can't find any hint
The setting for the MMS,GPRS, all already correct ( using manual and imate configurator ) no hope also.
Click to expand...
Click to collapse
Hi h9s,
I've found your post googling for something else. I suppose you have already solved your problem with internet connection by now. Please, disregard this post in this case. Anyway, I wonder if you have already changed the GPRS authentication method. Go to Start > Settings > Connection tab > GPRS Authentication. Its defaulted to CHAP. Change it to PAP instead and give it a try.
Just my 2 cents...
Cheers!
Carlos
SOLVE!!!
Stupid Old SIM Card Was The Issues
After 10x Hard Reset, Finally Found Out My Mistake.
^^
Now, I'm Happy
Cannot update imate configurator
Hi I cannot connect through my GPRS, seems like something wrong with the connection setting. Currently I'm using Satelindo (Indonesia), and I tried to download the imate configurator file from https://www.imate.com/Support_OperatorSettings.aspx but when I try to install it always says The previous version must uninstalled before, and when I click yes, it always failed to uninstall the previous version & the instalation unsuccesfull. Anyone could help me? Thanks in advance
spizaetus said:
Hi I cannot connect through my GPRS, seems like something wrong with the connection setting. Currently I'm using Satelindo (Indonesia), and I tried to download the imate configurator file from https://www.imate.com/Support_OperatorSettings.aspx but when I try to install it always says The previous version must uninstalled before, and when I click yes, it always failed to uninstall the previous version & the instalation unsuccesfull. Anyone could help me? Thanks in advance
Click to expand...
Click to collapse
You see, I find i-mate's Configurator to be pretty useless in detecting my carrier's data here in Brazil, for what I removed its .lnk item from my \Windows\StartUp a long time ago, and I manually provided my carrier's data (GPRS, MMS). Please, consider doing the same.
Just my 2 cents...
Cheers!
Carlos