[Q] big problem please help :( im about to cry - Android Software/Hacking General [Developers Only]

okay guys long story short i flashed my phone with the wrong firmware. i have a sgs showcase from cellular south.
my phone gets stuck at the samsung logo, and plays the cellular south logo music. I believe reflashing it with odin using the stock firmware file will work, but i dont have one. PLEASE HELP omg please help. i think it'll be a .tar file right? and if i just redo what i just did using the right firmware it'll work? thanks so much. i cant say please enough
EDIT: by the way i can get to the android with the shovel and odin detects my phone. i just dont know how to go back to normal from there.

bump
Please guys...

Wont CyanogenMod help??? Not quite sure what youre problem is, but anyway...

i flashed the fascinate recovery.tar to my showcase on accident and im trying to get my original back.

Go to the device forums and search for odin that will fix it all
MT4G + CM7

BubbaKush said:
okay guys long story short i flashed my phone with the wrong firmware. i have a sgs showcase from cellular south.
my phone gets stuck at the samsung logo, and plays the cellular south logo music. I believe reflashing it with odin using the stock firmware file will work, but i dont have one. PLEASE HELP omg please help. i think it'll be a .tar file right? and if i just redo what i just did using the right firmware it'll work? thanks so much. i cant say please enough
EDIT: by the way i can get to the android with the shovel and odin detects my phone. i just dont know how to go back to normal from there.
Click to expand...
Click to collapse
find the right .tar file FOR YOUR PHONE!! ... Odin is pretty easy, if ur skeptical theres Youtube videos on it..

thanks for helping guys i really appreciate the feedback.
Still, ive looked everywhere and havent found a recovery.tar for my samsung galaxy s showcase (cellular south)

bump..
trying to find the cellular south showcase recovery.tar

Related

SGS bricked! Please help or mom will kill me

Dear Friends,
I happened to have a perfectly working rooted SGS running JPK on Froyo until a while ago. When I tried installing fonts with typefresh. This is where everything went haywire. The phone now doesn't want to boot. It says SGS I9000 and vibrates there 4 times and repeats the vibrating cycle. I want the phone to be working again else my mother will murder me. I tried going to the recovery mode and tried to do a factory restore but that didn't help. Tried to reflash the custom ROM I downloaded from this site (can't find that link) using ODIN but it doesn't work either. While reflashing I did not check the repartition tab. What are the possible solutions here?? KIES doesn't detect phone in download mode. Is there any link from where I can download the factory shipped froyo rom and try reflashing the same via ODIN.
Guys please help it has now turned into a Black Screen Of Death. Though I can still go back to Download mode....please help guys this is getting from bad to worse....
Update: The phone now only goes to download mode...
BUMP! Please guys a few hours before mom comes home from work...
Try flashing a 2.1 firmware with Odin.
Google samfirmware.
Sent from my GT-I5700 using XDA App
You could also try flashing
Froyo that does not brick
and then flash to JI6
EDIT:
Do you have the drivers set up for your device?
Also, What device are you using? The SGS line has many phones. My advice above was dependent on it being a Vibrant
Yes I do have the drivers for my device. I'll be trying 2.1 in a while. What are the chances of Samsung giving me a replacement for the device??
I live in India. We don't get the Vibrant here. It's just plain old Samsung Galaxy S GTi9000
pramathesh said:
Yes I do have the drivers for my device. I'll be trying 2.1 in a while. What are the chances of Samsung giving me a replacement for the device??
I live in India. We don't get the Vibrant here. It's just plain old Samsung Galaxy S GTi9000
Click to expand...
Click to collapse
If you can reach download mode, find you favorite firmware in one of the guides on XDA, and using Odin flash it.
If you know what firmware you were on, you can also just reflash the PDA file of that firmware. The PDA file is Packages inside the rar file you download from samfirmware.com
Best thing is to find a guide, and follow it.
I'd JPK before things went haywire. I'm wondering what's the difference between JPK and JPM. Which one should I go for??
I'm planning to flash to JM8 then doing either JPK/JPM. Is this fine?? Or should I directly flash with JPK/M and forget about JM8? Which one is better K or M? Anything else I need to be aware of before I take the plunge??
pramathesh said:
I'd JPK before things went haywire. I'm wondering what's the difference between JPK and JPM. Which one should I go for??
I'm planning to flash to JM8 then doing either JPK/JPM. Is this fine?? Or should I directly flash with JPK/M and forget about JM8? Which one is better K or M? Anything else I need to be aware of before I take the plunge??
Click to expand...
Click to collapse
Hey pal.
It really doesn't matter which firmware you flash. Over the time, I realized that what works for one does not necessarily work for the other. It really is a very subjective thing.
Between JPK and JPM, the later (JPM) is the latest release. If froyo excites you, go for either JPM or even JP6 (JP6 being a day newer than JPM and recommended i suppose). If eclair suits your use, I would suggest JM9
Links:
Eclair - JM9: http://forum.xda-developers.com/showthread.php?t=802909
Froyo - JP6: http://forum.xda-developers.com/showthread.php?t=807351
It really is not difficult flashing firmwares on the i9000. Just follow the instructions from the thread to the dot and you are all set to go. In the same breath, I would also go as far to suggest that you stay away from custom ROM's till you get familiar with the process of flashing ROM's and troubleshooting (in case anything goes wrong). Stick to the stock ROM's and you should be good to begin with.
Do update on your progress.
Cheers.....
Fixed it. Flashed JPK everything working now! Thanks for all the tips and inputs!

need the stock firmware for my sgh-t959v

i was really really stupid and decided to try and install darky's resurrected rom on my new sgh-t959v. After doing it and it not going past the 'installing csc' prompt i decided to try and mount a different pit. i got a working setup out of luck, but now my sim card doesn't work. i got a new sim card and still no signal. i only managed to write down the baseband version before messing it up like this. now that i've read that mixing a pit file from one region with a csc file from another is dangerous. i just need the stock pit csc and phone files. it's been driving me nuts because i just got this phone and all of a sudden can't use it. i've learned my lesson but i really need to fix it. i don't think darky's will work on mine since it's so new.
btw i found the source for my phone,(can't put link here because i don't have over 8 posts) my model and version are listed there. the only problem is i'm a noob at developing(getting into it) and can't compile all this stuff. is there a guide to compiling it? i was hoping to compile the source from that site and try to port it. how would i go about making the source into the pit csc and modem files?
sorry for such a ****ty problems guys. hope someone can help thanks in advance.
super buuuuump!!!
bump, i want my foooone herpaderp!
what's the difference between pit files that are 512, 803, 513? what's this number represent?
so i just tried to flash some other 'custom' rom that was perfect for my phone. i tried it with a different pit file that i thought would work. but now the device doesn't respond to anything! i turned it off and it won't turn on at all now not even to download mode. i'm freaking out what do i do!!!
welp i didn't want to wait. just to update everyone i took it to a local tech who flashed it to stock but couldn't fix the fudged bootloader. i messed it up when it failed a rom flash and i pulled it out in the middle of flashing. so i'm sending it back and getting another one by tuesday
yes, i need it too.
Same problem, anyway know where download this firmware???
No Custom ROM
A word to the wise: The Samsung sgh-t959v for t-mobile does not allow you to put a custom ROM. If anyone knows how to, please advice. I have a new sgh-t959v and don't want to make the same mistake of bricking it where "adb reboot download" command didn't even work because the phone died.

samsung showcase HELP!!!

I apologize in advance, since I know people have asked questions similar to this already. But I am desperate for help, as I have been trying to fix my phone for 3 days now, and have not gotten anywhere!!! so here is my story/problem.
I was trying to do an update on my samsung showcase (cspire) using kies, and during the download it was interrupted somehow. The phone was bricked. (i think) so then I found something called one-click unbrick. after that i'm able to put the phone in download or recovery mode.
So i have been trying to get factory rom back on my phone. I downloaded odin3 v1.70 and v1.82 (i have tried both of these) and i have downloaded atlas 2.2 for pit and I have tried both EH09_modem_CS.TAR.MD5 and EI20.tar.md5\EI20.tar.md5. Everytime I do this odin freezes on factoryyfs.rfs.... I have tried all the tricks I can find, different usb port, diff cable, running as admin, i even download sandboxie ( someone suggested that)... I dont know if i am doing something wrong, or if it is odin... Also, i'm not rly sure about the software i'm using... I have very little experience with this kind of stuff, but i am really determined to fix this! please forgive my ignorance! TIA!!
Try flashing a custom rom and boot.img first then Odin back to stock
AshtonTS said:
Try flashing a custom rom and boot.img first then Odin back to stock
Click to expand...
Click to collapse
I've been trying to find one, you don't happen to have a link to where I can find one do you?? Also can i do this using odin, the same way I have been trying to get the stock on there?? Thanks for you help!!

HELP PLEASE... GALAXY TAB P6200 Softbrick

Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:
userpjay said:
Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:
Click to expand...
Click to collapse
Need more info, exact model number firmware you were on, firmware file you were tryimg to flash, did you check, or uncheck anything in Odin? Download mode is good, you should be OK.
How do you know its softbrick? Bootloop, hang at logo? Which one?, as much data as possible will get you fixed faster.
I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.
nabile said:
I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.
Click to expand...
Click to collapse
I have limited knowledge on flashing, but as far as I know, If u r using a 'PIT' file, be sure to check on 'Repartition' Option in Odin (while flashing). If u Flash wid ONLY a md5 file, ensure that 'Re Partition' box is unchecked while flashing. May be u kept Repartition checked while you were not using a PIT file or vice versa.
If that is d case, try flashing again by following a correct process.

Help w/softbricked Samsung

I have a SM-G530T. What I need is the PIT file for this model of Galaxy Grand Prime.
Its in a bootloop at the logo screen. When trying to fix in odin using the stock rom 5.1.1
I get the error message "Fail" in Odin at the system.img.ext4 stage.
Ive been looking for days for the download file. Google lists sites that have it but cant find it on their sites.
Could someone help or maybe suggest another way to fix my phone.
I truly appreciate your time.
joe
dikhuntn said:
I have a SM-G530T. What I need is the PIT file for this model of Galaxy Grand Prime.
Its in a bootloop at the logo screen. When trying to fix in odin using the stock rom 5.1.1
I get the error message "Fail" in Odin at the system.img.ext4 stage.
Ive been looking for days for the download file. Google lists sites that have it but cant find it on their sites.
Could someone help or maybe suggest another way to fix my phone.
I truly appreciate your time.
joe
Click to expand...
Click to collapse
although this is not your model, these guys seem helpful in finding some pits.
also, this guy seems to know how to pull it. if you could find someone currently posting with your model, maybe you could sweet talk them into pulling it for you
thank you
bweN diorD said:
although this is not your model, these guys seem helpful in finding some pits.
also, this guy seems to know how to pull it. if you could find someone currently posting with your model, maybe you could sweet talk them into pulling it for you
Click to expand...
Click to collapse
thank you so much for replying. ive tried sammobile....but no pits for my model. i read the message from that guy about his phone the other day..ill try him.
thanks again.

Categories

Resources