NEED Help on ZuneUSBConnection.dll and ZuneWlanCfgSvc.exe - Windows Phone 7 Q&A, Help & Troubleshooting

Dear Friend,
I seeking some help from you. I'm having touble to Sync my HTC DH7 with ZUNE.
My PC currently using Windows 7 64bit. I already install ZUNE for 64bit. unfortunately my phone was not recognize by my ZUNE software.
I've ran the Zune Device Utilities to determine the problem. and on the FILE tab, it shown that : ZuneUSBConnection.dll and ZuneWlanCfgSvc.exe was missing.
I already try to Google it... unfortunately not on my side.
Whoever have this file and dont mind to share, it would be pleasure to
say thanks so much for your help.
Regards.
Azman Ishak.

try uninstalling and reinstalling zune. maybe your anti virus deleted them thinking they're viruses?

The Gate Keeper said:
try uninstalling and reinstalling zune. maybe your anti virus deleted them thinking they're viruses?
Click to expand...
Click to collapse
Hi there... I already:-
1. Format my HTC HD7 sdCard - Done
2. Flash My HTC - Done
3. Change my OS from Windows 7 32bit to 64bit, vice versa - done.
4. Used the correct usb cable - Checked & Done
5. Soft Reset and Hard Reset the phone - Done
6. Restore to factory setting - Done
7. Remove and install ZUNE - Done
All has been done. But still failure..

anti virus? what are you using?

The Gate Keeper said:
anti virus? what are you using?
Click to expand...
Click to collapse
I'm not using any antivirus. and my pc is only used by me. quite tough for me to find the solution. the phone completely work with zune past few month. but now.. everything goes fakap. I was able to install any apps from market place without problem.. (which means, the sistem or the sdcard is good) but unable to be detected by ZUNE software.

only thing i can think of from here on is to completely wipe all memory of the phone from your pc and try again. in zune on the desktop > settings (top rightish) > phone tab > "forget this phone".
then connect the phone to the PC and start up device manager (start, type it into search). you should see your phone come up there. if it doesn't, try a different usb port. if it does, right click on it and uninstall. when uninstalling also delete the driver itself (should be a checkbox asking).
then restart PC and try to sync again.
if this doesn't work... my final 2 suggestions are wait till the update, or claim under warranty for a new device.

The Gate Keeper said:
only thing i can think of from here on is to completely wipe all memory of the phone from your pc and try again. in zune on the desktop > settings (top rightish) > phone tab > "forget this phone".
then connect the phone to the PC and start up device manager (start, type it into search). you should see your phone come up there. if it doesn't, try a different usb port. if it does, right click on it and uninstall. when uninstalling also delete the driver itself (should be a checkbox asking).
then restart PC and try to sync again.
if this doesn't work... my final 2 suggestions are wait till the update, or claim under warranty for a new device.
Click to expand...
Click to collapse
Hi there,
Thanks so much on your help and troubleshoot. I already followed your instruction. unfortunately still got the problem.
Here's some print screen for you.

Related

ActiveSync sync problems using USB

Hey all. Sorry if this is in the wrong forumsection, feel free to move it if so.
I am having problems syncronizing my TyTn II with my PC. I am using Activesync 4,5. I read somewhere that this can occur if you change the usb port from the one you were using the first time, and i think that is what i might have done.
Has anyone else had this problem? What can i do to fix it?
This (registry change) did the trick for me
http://www.aximsite.com/boards/activesync/120851-activesync-4-1-sygate-personal-firewall-pro.html
Thanks mate, that seems to be a solution to the problem. Only problem now is that as far as i know i dont have a regedit program on my phone. Which one should i use and how to i go about using it? How do i get the program onto my phone when i cant use Activesync?
Appreciate any help..
I just started a thread like this in the Hermes forum
http://forum.xda-developers.com/showthread.php?t=361633
here's what i got, haven't tried it yet.
cyberscribe said:
Try this procedure step-by-step
1. make sure your phone is not connected to the computer in any way
a. Bluetooth off
b. WIFI off
c. USB cable not connected
2. Run spybot S&D (I always do this when the computer misbehaves - and make no mistake your computer is misbehaving)
3. Terminate all other running programs
4. Hook your phone to the usb cable and the usb cable to the computer. (don't worry if it syncs or not)
5. Open Device Manager and select Network Adapters
6. Uninstall the Windows Mobile Device
7. Disconnect the Phone
8. Open the Control Panel "Add/Remove Programs" and uninstall Active Sync
9. Reboot the computer
10. Connect to the internet and get a fresh copy of Activesync 4.5 and install it.
At this point if you can back up your PIM to the storage card or something it would be great because I suggest you do a hard reset of the phone. go to the settings page and select System. Tap the clear storage icon and follows the instructions to reet the phone.
11. Reset phone as above
12. When phone reboots, connect it to the computer via the usb cable.
Phone should sync from now on.
Good Luck
PS.
MrVanx is right, that could help but it will limit your phones capability. However if my method fails that may be your only option short of reflashing the phone with some other ROM.
Click to expand...
Click to collapse
Thanks for the tip there, sook. I just tried it and it didnt work for me.
I did all the steps except for these:
5. Open Device Manager and select Network Adapters
6. Uninstall the Windows Mobile Device
The thing is i cant find my mobile device anywhere in the device manager or in the network adapters subcategory. Any ideas?
Is there any way to edit the registry on my phone without having to download and install something? Like a built-in program or something..
SeqHTCTyTnII said:
Thanks mate, that seems to be a solution to the problem. Only problem now is that as far as i know i dont have a regedit program on my phone. Which one should i use and how to i go about using it? How do i get the program onto my phone when i cant use Activesync?
Appreciate any help..
Click to expand...
Click to collapse
Download through wlan or copy it to the memory card with pc...I used TascalSoft TRE:
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/tre_e.htm

Windows Mobile Device Center doesn't sync

So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
[email protected] said:
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
Click to expand...
Click to collapse
what os?
try a new cable, or try plugging the cable into a different usb port.
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
You could just update to the latest HTC ROM from the official website if your phone is still under warranty, btw thats what i did but it didn't help. Note, that i'm running Windows 7 as my OS if anyone want to know this information to help solve the problem. Thanks in advance.
[email protected]
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
Settings-->Connections-->USB to PC and Uncheck Enable faster data Synchronization
I have the same problem.
in my situation i tried to recover usb-flash and flash a nokia phone. For both things programs installed their own drivers. Even after I deinstalled the software I probably still have their drivers on my pc. That's why I can't sync my phone...
is there a tool to manage installed drivers?
or the other way out is to reinstall windows 7
anyone willing to help?
This solution worked for me:
Thanks to Scubamike
copy and paste from
http://social.microsoft.com/Forums/...c/thread/7a6516e2-9a46-4e1f-b689-1aa7dc2bda64
I found a different solution that worked for me: On my phone I clicked start/programs/active sync/options and deleted all the old PC connections that were displayed. In fact, you could probably just delete ALL the PC connections displayed and start from scratch. You'll just have set up another sync partnership in WMDC when you plug it in. Let me know if this helps.
it is to easy! should work ALWAYS:
Make sure "Advanced network functionality" is switched off in the USB to PC settings then:
go to activesync, menu, connections, disable "connect via USB" off, press "ok" go back to connections, enable "connect via usb" press "ok" unplug and replug your cable. and all works.
greetings
i had trouble with a 6.5.3 rom i just cooked. had to uninstall, reboot, reinstall wmdc, then i synced okay.
I have the last original rom and win 7 and with removing all remembered connections on the pda, it connected immidiatly. Thank you for the help
i have been all over the microsoft forums to no avail. i recently updated my laptop to win7, and have a fuze running 6.1 mobile. when i connect my fuze to the laptop the laptop recognizes it as it begins to charge, but then nothing. i try to open win mobile device center and this is the error message i get C:\windows\system32\rapistub.dll is either not designed to run on windows or it contains errors. I have uninstalled and reinstalled 3 times and also tried different usb ports on my laptop. If anyone can help that would be awesome

Help with sync configuration

i just buy wp7 yesterday, i was no idea how to sync it to the pc.
i heard that you need zune to sync with it like itunes. i'm installed it once, but it cannot update and say 'connection error, restart software'.
so i reinstalled again, but stuck at 100%.
a lot in the internet say that their os was XP of vista, and no windows 7 (and i'm using w7).
please, share with me how things are working here. thanks
i was able to sync and I have windows 7.
-make sure ZUNE is up to date
-you may get better results using the USB cable that came with the phone
-if you have more than one, try them all.
-you may get better results using the USB ports on the back of the PC
ScreenMode said:
i just buy wp7 yesterday, i was no idea how to sync it to the pc.
i heard that you need zune to sync with it like itunes. i'm installed it once, but it cannot update and say 'connection error, restart software'.
so i reinstalled again, but stuck at 100%.
a lot in the internet say that their os was XP of vista, and no windows 7 (and i'm using w7).
please, share with me how things are working here. thanks
Click to expand...
Click to collapse
Have ya configured your phone already, a Live account and all that jazz ?
I have Windows 7, so that is not your problem... make sure your Zune is workling properly and if needed download a new version and reinstall it. Syncing Zune and WP7 is a pretty straight forward thing.
i'm already did that, it's just now i am trying to "reinstall" zune because it cannot update my windows phone 7 (version with no copy-cut-paste)
my zune installer is "downloading update at 100%" and stuck, no solution on the internet. some say to go back to xp (LOL)
for sync-ing my wp is no problem because it is straight forward
ScreenMode said:
my zune installer is "downloading update at 100%" and stuck, no solution on the internet. some say to go back to xp (LOL)
Click to expand...
Click to collapse
Like I said, I have Windows 7 x64 and the system runs great and no problems with Zune.
In you Windows try and create a new use with admin rights and try and install Zune in that user area, or use System Restore to roll back to a few days back... telling you to format and reinstall Windows 7 should be a last resort.
What "update" are you trying to install?
Avandor said:
Like I said, I have Windows 7 x64 and the system runs great and no problems with Zune.
Click to expand...
Click to collapse
that's what i was worried about, it should be no problem, but why there's problem?
What "update" are you trying to install?
Click to expand...
Click to collapse
nothing, i'm trying to install, but the installer say updating, maybe i got old version package.
new problem here: i'm already download new package for installation, and i stuck at this point "preparing you computer, installing the zune sofware", so i think i have to contact zune for this problem
update: i just got the solution form help forum, apparently he say "just hit spacebar", and it work, feel like slap the software to wake up.
but now the software doesn't installed properly, no shortcut in the desktop
ScreenMode said:
new problem here: i'm already download new package for installation, and i stuck at this point "preparing you computer, installing the zune sofware", so i think i have to contact zune for this problem
Click to expand...
Click to collapse
How long have you had that current installation of you Windows 7 ?
It might be a problem with your OS and not Zune... like I said, create a new user with admin right and install from there, Restore System to an older date.
If all fails, might be time for a fresh Windows 7 install.
Avandor said:
How long have you had that current installation of you Windows 7 ?
It might be a problem with your OS and not Zune... like I said, create a new user with admin right and install from there, Restore System to an older date.
If all fails, might be time for a fresh Windows 7 install.
Click to expand...
Click to collapse
sorry for not doing that directly, i don't know what happen to me.
i am tried new account, it says "zune already on latest version"
how can i do the restore system thing?
ScreenMode said:
sorry for not doing that directly, i don't know what happen to me.
i am tried new account, it says "zune already on latest version"
how can i do the restore system thing?
Click to expand...
Click to collapse
Accessories, System Tools and you should have System Restore there. Try and restore to an older point in time, see if that helps.
When all else fails... format c:
system restore didn't have any effect at all. format is the only option left, i give up on this software.
i just don't want to waste anymore time, i'll use wp7 connector for mac instead.
thank you very much for everyone here for spending time to answer me. operator may closed this post in peace.

Device not connected - Help, can't deploy apps anymore

Hi,
I have an unbranded HTC 7 Mozart T8696 Device running NoDo 7392.
It was chevron unlocked before I upgraded to NoDo and I was able to install apps aferwards. Currently sideloaded apps still work, so I assume the chevron unlock is still active. After about one month I wanted to sideload another app, but I always get an error telling me the device is not connected to the PC (I tried XAP Deploy and "Windows Phone Device Manager" even though Zune is running and showing the device as connected.
Any Ideas what might be wrong? I already tried uninstalling .net framework 4 and windows phone developer tools and re-installing, but it still shows "device not connected"
try this ... go to C\windows\system32\drivers\etc , open the file named "hosts" with notepad and delete any lines that say windowsphonedevelopement...
Hi,
thanks for your feedback. my hosts file is empty, still not working.
I am still using Zune 4.7 should I update to 4.8?
i had this same problem with my hd7 before and it worked after deleting that ... thats weird , yea 4.8 is now officially released u should update ..hopefully it will solve ur problem
still no luck, even with Zune 4.8
check this out ...
http://phone7.wordpress.com/2010/12/01/wp7-deployment-error-codes-explained/
http://msdn.microsoft.com/en-us/library/gg588381(v=vs.92).aspx
thanks, but this just doesn't help me
Failed to connect to the device. Ensure that the device is completely booted and is connected to the PC.
This can be caused by several reasons, including if the device is off. If the device is already connected, sometimes disconnecting and then reconnecting the device may fix the problem. Rebooting the device may also fix this problem.
This is what i tried multiple times. Rebooting the PC, rebooting the phone, re-installing .NET Framework 4, re-installing WP7 developer tools... all to no avail...
did u make sure the phones sync relationship with zune is not guest
Yes, I made sure it is. Nothing has changed on my PC really, except i switched routers. I am not sure what's happened...
hmmm maybe u can try going into device manager and uninstalling then reinstalling the phone drivers
I also went along and tried that. Still no luck.
EDIT: to clarify, I selected to uninstall the device and delete the driver files along with it. When I connected the phone it was re-installing the drivers.
tbh, i give up now. It's probably my phone and I can't be bothered to start from scratch again.
sorry i couldnt help u fix the problem
Instead of zune. Try using wpconnect.exe instead.
Thats all I use and its alot quicker that opening up zune and everything.
If you have Developer Tools 7.0 and the January Update wpconnect can be found here
C:\program files\microsoft sdk's\windows phone\v7.0\tools\wpconnect\
Restart your computer then connect your phone via usb wait for computer to recognize the phone. Then run wpconnect.exe... Dont run zune at all.
Hello,
thanks for your feedback, but wpconnect is giving me the same error as all deployment apps:
Failed to connect to the device.
It suggests i open zune and close it again. Zune itself recognises my phone and is able to sync data to it. WPconnect and deployment apps keep on telling me the phone is not connected...
*Bump* Anyone else have this problem?
could it be a pc registry problem ?
*bump* Still can't sideload
Hello !
Actually I've got the same problem.
Reparing .NET does nothing.
I've tried many things, as uninstalling programs that could interact on USB (VM Ware Workstation, Oracle VirtualBox, Kaspersky Internet Security 2012 and so on).
None of the XAP Deploy application works... And ChevronUnlocker is concerned to.
I don't know what to do.
Here I am too...same problem with my gf's optimus 7, no deplyment tool can connect to device, error 0x89731812, Zune works flawlessly.
Did you guys find the problem after warranty repair?
So, I seem to be running into this problem every 4 weeks... I am starting to hate this, I can never fix the issue aside from hard resetting my phone with a new ROM...
Anyone found a solution to this problem yet? I am currently on DFT v2 and I can't deploy xaps via PC. I can still deploy with the built in XAP deployer, but I have 2 xaps that I can't deploy using this method...

Samsung WP7 USB - to - PC not being recognized ?!?!?

Hi all !
This is so simple but it is driving me crazy.
I run Win 7 X64 and have a new [ network unlocked ] Samsung Focus 2 SGH-i667 phone.
No matter what I do, the PC will not fully recognise the phone when it is usb connected to the PC.
Zune *does* see it
Kies [ latest version ] does *not* see it.
Windows Phone 7 Developer Tools does *not* see it.
Windows *partially* does see it but it does not load the "Qualcomm CDMA MSM" drivers - as such,developer unlocking so as to side-load application XAP's is impossible.
I have tried numerous USB cables / numerous different USB ports / the *latest* Samsung USB drivers / forcing Windows Update / even a clean machine etc..... all to no avail.
I plug the phone in, it starts to load the driver and then it comes up with Device Driver not found - I let Windows Update do its thing, but still no go.
Please Help !
This is such a simple thing,
How can I make Win 7 X64 *see* my Samsung WP7 phone fully so that I can developer unlock it to side-load application XAP's ?
All help will be hugley appreciated.
Ben
I pl
my first suggestion would be to remove all the drivers you have installed and get it working correctly with zune, the best way I find to do that is use This program, it lists all USB devices, delete all the ones that maybe associated with WP, delete and uninstall!
then remove zune
install zune, restart then plug in your phone, see what happens then, for now, forget any other driver you may think you need,
dazza9075 said:
my first suggestion would be to remove all the drivers you have installed and get it working correctly with zune, the best way I find to do that is use This program, it lists all USB devices, delete all the ones that maybe associated with WP, delete and uninstall!
then remove zune
install zune, restart then plug in your phone, see what happens then, for now, forget any other driver you may think you need,
Click to expand...
Click to collapse
Hi RC
Genuinley - many thanks for helping out.
Did what you suggested - everythinhg is clean as a whistle - still the same issue - Zune sync's and see's the phone, but Win 7 X64 see's some of it but not enough for the developer unlock [ chevronwp7 ] to proceed - it jusy comes up with the error saying something like cant connect via usb - try re-opening zune etc.....
Please see the attached " devices.jpg " to see what my system is " seeing " .
My phone is a newer Focus 2 SGH-i667 WP7.5 phone - maybe its too " new " ?
Any help will be grealty appreciated.
Thanks again,
Ben
ben ifin said:
Hi RC
Genuinley - many thanks for helping out.
Did what you suggested - everythinhg is clean as a whistle - still the same issue - Zune sync's and see's the phone, but Win 7 X64 see's some of it but not enough for the developer unlock [ chevronwp7 ] to proceed - it jusy comes up with the error saying something like cant connect via usb - try re-opening zune etc.....
Please see the attached " devices.jpg " to see what my system is " seeing " .
My phone is a newer Focus 2 SGH-i667 WP7.5 phone - maybe its too " new " ?
Any help will be grealty appreciated.
Thanks again,
Ben
Click to expand...
Click to collapse
if its syncing with zune then your at least half way there, did you leave zune open when using the XAP deployer? did you install the full SDK? I know there are "smaller" packages out there but where theres doubt there are potential problems, we need to turn them in to real problems or rule the out so uninstall whatever SDK you used, make sure the full SDK is re installed.
Im actually about to try installing my Focus S on a brand new Win 8 x64 system So ill double check all the steps but I didn't think we needed the Samsung drivers to XAP install, I thought that was cab updates and QPST stuff.
Anyhow, make sure zune is running and is synced, make sure you remove and reinstall the full SDK and get back to me, ill check all the steps today
its connected to win 8 at the moment, no zune, no SDK and its installed as a portable device (Samsung SGH blar blar) im just getting the zune package, ill sync it, then ill install SDK and attempt some XAP deploying
dazza9075 said:
if its syncing with zune then your at least half way there, did you leave zune open when using the XAP deployer? did you install the full SDK? I know there are "smaller" packages out there but where theres doubt there are potential problems, we need to turn them in to real problems or rule the out so uninstall whatever SDK you used, make sure the full SDK is re installed.
Im actually about to try installing my Focus S on a brand new Win 8 x64 system So ill double check all the steps but I didn't think we needed the Samsung drivers to XAP install, I thought that was cab updates and QPST stuff.
Anyhow, make sure zune is running and is synced, make sure you remove and reinstall the full SDK and get back to me, ill check all the steps today
its connected to win 8 at the moment, no zune, no SDK and its installed as a portable device (Samsung SGH blar blar) im just getting the zune package, ill sync it, then ill install SDK and attempt some XAP deploying
Click to expand...
Click to collapse
Thanks - I'll do that and report back - look forward to hearing how you go at your end too.
Ben
ok, exact step by step - clean install of win 8
plug phone in (device manager lists it as a portable device - Samsung SGH-i937)
Download zune 4.8 and install, it will ask you to unplug the device so unplug it
plug in device and sync it properly
turn off zune
download and install the full 7.1 SDK note that it will throw up all sorts of errors, just install it anyway
don't restart
then download the SDK 7.1.1 patch, that will let it run on windows 8
don't restart
turn on zune and sync (note that device manager still lists it as a portable device - Samsung SGH-i937)
open up application deployment from the sdk and upload your XAPs (assuming you have it unlocked that is?)
the mere fact that is installing other drivers tells me its maybe conflicting, remove all traces of the drivers using USBDVIEW, also uninstall them, check the add remove programs in the CP and remove anything in there as well, the strange thing is I get those drivers installed when I mess about with the low level hardware using QPST, oh try a different USB port as well, not on the same bank, use a different set if you can.
dazza9075 said:
ok, exact step by step - clean install of win 8
plug phone in (device manager lists it as a portable device - Samsung SGH-i937)
Download zune 4.8 and install, it will ask you to unplug the device so unplug it
plug in device and sync it properly
turn off zune
download and install the full 7.1 SDK note that it will throw up all sorts of errors, just install it anyway
don't restart
then download the SDK 7.1.1 patch, that will let it run on windows 8
don't restart
turn on zune and sync (note that device manager still lists it as a portable device - Samsung SGH-i937)
open up application deployment from the sdk and upload your XAPs (assuming you have it unlocked that is?)
the mere fact that is installing other drivers tells me its maybe conflicting, remove all traces of the drivers using USBDVIEW, also uninstall them, check the add remove programs in the CP and remove anything in there as well, the strange thing is I get those drivers installed when I mess about with the low level hardware using QPST, oh try a different USB port as well, not on the same bank, use a different set if you can.
Click to expand...
Click to collapse
Hi dazza
In your Device Manager, do you get any " yellow flags " like I do with the .jpg I posted above ?
Ben
ben ifin said:
Hi dazza
In your Device Manager, do you get any " yellow flags " like I do with the .jpg I posted above ?
Ben
Click to expand...
Click to collapse
nope, I don't sorry.
have you played with the diagnostic tool at all? perhaps changed the USB mode?

Categories

Resources