Related
Morning / Afternoon / Evening to All,
Not to be critical of this wonderful website which is full of great resources but, I have noticed that the useful info is hard to find.
So I thought it might be a good idea to post all of my items in the one place so here goes.
I will update these as i go.
TIP
If you want the CAB Files in remain in your PPC after install simply change the files preferences to "Read Only"
since i was just upgrade from wallaby to magician, i found all your posting, instructions and cab files very very helpful thanks a lot ampda, you rules :!:
Hello ampda , Great Work Friend . . . many thanx for these cabs and instruction files.
Cheers for taking the time to make them for the rest of us noobs
Glad to Help
verry nice indeed but there are simpler ways of doing the discribed below
(copied this out of pdf file )
3. Copying your “Extended ROM” Files before Big Storage
You need to copy the files from your “Extended ROM” before you go the Big Storage as you will need to install some of them after you’re finished, i.e. MMS etc. They will be deleted after the upgrade (and that’s the whole point).
a. To copy them from your Magician do a hard reset (push the power button and reset button at the same time).
b. Go through the screen alignment, time zone etc and get ready…….. when you reach the “Completed” screen it will ask you to “Tap your screen…. As soon as you tap the screen you get 3 sec to soft reset (push the reset button). If you miss it as I did just do a hard reset and try again.
c. After you do b. above go to the built in file explorer and under “My Device” you will now see the treasured “Extended_ROM” with all its files. Copy the directory straight to your SD Card then to your PC, keep them safe.
its just a bit easyer when you just fill in
go to windows folder on PPC and search loadvdisk.exe
run it and you will see your ext_rom (until you reset )
not to sure the usual file explorer can do this but Resco file explorer will find it
another progie that can find it is total commander :
find it here
http://www.ghisler.com/pocketpc.htm
no offence ment by this
Logos for Qtec, i-mate...
http://www.npo-hors.ru/logoqtek/logoqteks100.rar
Hi!!
Thanks for all your help!
Does anyone konw, or is there a way to save to the pc the SMS messages both received and sent??
Cheers!
use jeyo mobile companion. u can backup all of your messages, contacts (phone and sim), etc.
Hi!
Thanks for the tip!
By the way, and i think these questions are more tricky, is there any way NOT to charge the battery while the phone is connected to the USB?
And while using the calling software, when inputing the nunbers, to make the sim card entries dissapear and only have the ones that are in the contacts? Because most of the times i have a double entry and it really makes me mad!
Thanks!
The way to NOT to charge the battarie is to make some changes to your cable - cut +5v from USB (or make a switch).
the tray launch only app.... theres now way to BROWSE for the program you want on the tray?
sucks that you have to type out the entire path just to get it
Any idea whether these (or more specifically the camera speckles change) will work on a Wizard?
Remove Camera
Noob question here.
Once i install the camera & album to Storage how do i delete it from the \windows . Maybe not possible due to it being in ROM. In this case I end up with 2 camera software? So i'm curious what is the idea of installing in storage.
Halo ampda, i tryin to follow your how_to_ppc_upgrade.pdf buat I stuck in the step 4 backing up your existing rom to PC, in romupdate.exe I still confuse about the PORT things. can you help me to, which one to use?
please help...
thanks
Thanks for nice posting AMPDA..
I have a question,
I installed ampda_CameraV2.7b21026_RAM.CAB
but my camera version was 2.70 (build 18727) and it is still the same. I reset the device but still didnt become build 2026.
Do you have an idea?
regards
Guys,
This sharing is really useful. I just bought mine few days ago from ebay. Mine doesn't come with ANY EXT ROM at all! No software such MMS, smart dial etc.
Can anyone provide a link to get back those basic EXT ROM software so that I can upload it back? ftp://ftp.xda-developers.com/ is not working for me. Any help pls?
Pillow...
Pillow write your email address. I'll send you them via email. (Those which are not device spesific).
What is the type of your device and rom versions?
smellypillow said:
Guys,
This sharing is really useful. I just bought mine few days ago from ebay. Mine doesn't come with ANY EXT ROM at all! No software such MMS, smart dial etc.
Can anyone provide a link to get back those basic EXT ROM software so that I can upload it back? ftp://ftp.xda-developers.com/ is not working for me. Any help pls?
Pillow...
Click to expand...
Click to collapse
Hi Lupusic,
Thanks a lot for your kind offer. I manage to pull up the files from the FTP using cuteFTP software. Some how my company laptop doesn't allow default browser connection....
My phone is O2 mini and has v.1.13 for both rom & radio. I think it's BigStorage (not sure though).
Any good advice for me? I mean anything at all....
Thx again
Pillow....
Guys, I'm not able to run Boot Image Tool. It gives me this error
Component 'mscomctl.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
Any idea?
Thx....
Hi AMPDA,
Thanks for all your postings on big storage which gives detailed instructions step-by-step. Very brief and consise. Also now I notice you have put everything into 1 place like a table for pick and choose. Can it get any better ? Can't ask for anything more. You have so many useful cabs and instructions. I have benefitte a great deal. ONCE AGAIN Thank You.
Important:
before i begin let me say this is not my own work i did not wright these apps/files ive simply put them all toghether in order to create an iphone theme for my T-Mobile Wing. if you ever recive a message from me charging you for this theme then ignore it completly.everything i am providing you is entirley freeware. the reason i am telling you this is because there sevral people out there right now selling this files/apps as there own, but there are also people outthere that actualy do make there own and sell them so dont get confused.
zip. files
iphone-0.97
icontact_v0.2
Cab. files:
slide2unlock-wm5
tcpmp.pocketpc.0.72RC1
for thoes of you who dont have t-mobile or dont have myfaves. your gonna have to do some editing in the config file in order to change what it opens.ive also added a couple of icons in the icons folder so you can also change the myfaves icon.
in order for this to work properly with out having to do any editing to the config. everything must go into your storage card
unzip all the zip files attached to this email and then copy them to your windows mobile device.same goes with the cab. files.
once all the files and cabs are installed onto your device then you can run the iphone theme wich should be found in you storage card through file explorer hope this works for you,as it has for me.
sorry if the instalation instructions aren't great but they should be good enough in order to set up the theme for thoes of you who've done this kinda stuff wont even need the instructions
ENJOY!
FOR THOES OF YOU WHO ARE GETTING INK. FILE NOT FOUND WHEN YOU OPEN ICONTACTS
some people have been messaging me that when they try open icontacts from the theme there getting ink. file not found to correct this youll have to do some copy and pasting
you must exit the iphone theme first before doing this and you can restart it once your done
first you have to replace the config file found in the iphone themes folder with the new one i have provided below. everything will be the same i have just done some simple editting wich should get icontacts to work.once this is done then just go to the part of the storage card were you have icontacts and copy it then go to my device and click the windows folder once there just paste the icontacts app and this should get it to work. if not then uninstall icontacts and just reinstall it to your device
for thoes who want to edit the config file themeselves and not download the one i have then simply replace the part in the config file that has this
\Storage Card\Program Files\icontact\icontact.exe
and replace it with this
\Windows\icontact.exe
but you will still need to do the copy and pasting steps above
hopefully this helps let me no if it doesnt
ive tried my best to edit the config just right so you wouldnt have to do any but even tho you more then likely will have to do some editting
for thoes of you using tmobile wing go hear and post some stuff you may have to help others improve there device as well as find stuff to improve your's
http://forum.xda-developers.com/showthread.php?p=1400970#post1400970
sorry if you write me and i never write back im am extremley bussy now most of the time since ive gone back to work it takes up most of the time of my day and by the time i get home im too tired to do anything but ask around and im sure youll be able to figure out how to install the theme
if you want to see the theme working then go to this link for youtube to see my wing running the iphone theme
http://youtube.com/watch?v=cPt-7Au8Fp4
ok a lil something about icontacts this may or may not help some people but im posting it anyways if you start icontacs and it works but none of you name or numbers for your contacts apeer than you may have to transfer your contacts to your simcard or device itself im not sure right now wich one it is but try either one and it may help. im not sure if this goes for the newer versions of icontacs i havent used it yet so yea just a lil tip
ask around and im sure youll be able to get this theme running on your wing
10/19/09
just an update
i no longer own the wing and am now a proud owner of the mytouch 3g but there are still plenty of other tmobile wing users out there that would most likely be willing to lend a helping hand. just be sure to always do some reading and searching first.
TmobileWingUser
mod edit: Link to Slide2Unlock removed.
awesome
if you own a wing you should definetely do this to your phone, and also thank tmobileuser for giving us this chance to do the same to our phones
haha I Love how my video is the first one that shows up on the suggestion list
i might try this out later today or tonight, looks pretty nice and fits tmobile perfect. always wanted to try that ipod thing out
for anyone who trys this let me no if everything opens smoothly so i no wether ill have to edit the config or not thanx for you help
is that ipod program in it? i never installed uPod but I did download it awhile ago. do we have to install that ourselves too?
the ipod that i had in my video was a trial version so i replaced that button to start slide2unlock instead
Oh, well I found the pPod and change that link to actually start the pPod program. Works great, love the icons!
thats cool is the pPod version you got a trail verson or no if its not can you send me the link were you got it from so i can put it back on my phone thanx
Installation
Can someone post a word document on how to install these file on my wing? Also, would it be best to wait until myFav is turned on. I just purchased my wing and myFav isn't on yet.
Thank you tmobilwinguser for posting these files and anyone else who can help me get my phone like the video on youtube.
Installation
Disgard my first request for instruction. I justice two things one tmobilwinguser has listed instructions and on his youtube post he will be adding a short video to show how to install it on the wing.
Thank again tmobilwinguser
where do you place the batterstatus folder at on your phone, and open it to?
Does this work on HTC Touch? the themes look nice and i wish to install it on my touch. thanks guys
does this work in Htc Touch? thanks
does any body have the same problem
when i click on the contacts icon it says .Ink file not found, if anybody else has the same problem, please reply. or if they can tell me where they put the icontact folder at.
i just finished putting it on and it is sweet hey thanx for the post im going to use this for sure, i think it runs better than when your useing wm6. Well any i do have one question were do you put the icontacts it said it cant find it when i click on the icon? But other than that like i said its cool lol
Optional Battery Status
Optional
for this program at least for me anyways it doesnt matter were you put it i have mines on device and once installed you can open it from your programs
for thoes of you who may be using the t-mobile wing and find it kinda slow or slugish then i recomend using a program called battery status it overclocks your cpu in order to run faster i currently have mines clocked to 286 but i recommend you start at 247 first and then go from there like i said this is optional you dont need this in order for the iphone theme to work i just though id add it for thoes who may want it
how do you change the icons for it and how can you change the front picture of the lock screen?
for those having the problem with the icontacts , i figured out what the problem is. open the iphone folder and look for a document called "config". scroll about half way down to where it says \Storage Card\Program Files\icontact\icontact.exe.you have to capitalize the "c" in icontact. it should look like this .....\iContact\iContact.exe. i hope this helps. NOTE o not play arund with anything else in this document if you don't know what your doing.also i havethe file located in my storage card.
how can i get those programz i am tryin 2 download it it wont let me
help with iphone theme
I can't download the zip files, and when is the slide2unlock going to be back for download. I just ordered my wing and should be getting it on friday so i wanted to know if anyone could help me with downlaoding the files
So today before work I installed the Kavana 6.1 rom onto my Dash. Awesome with the exception of the keypad not being mapped the way i was used to. So I read forums about this and decided to download the t9 mapping. I unzipped the files on my computer and transfered them into a newly created folder inside of the windows folder....thats where things went bad. Now when I hit the start menu no icons load up, only the name of the program or application, and when i attempt to select it, i am prompted "error opening the shortcut or locating the filename. In essence the only thing I can do on my phone is text, call, or utilize any feature which is on the home screen. The worst part is I cannot syn to my computer as the usbstorage.ink is under the start program I screwed up royally, and I could use some insight from anyone who might be able to help me. Thank you in advance.
sabiandrums3 said:
So today before work I installed the Kavana 6.1 rom onto my Dash. Awesome with the exception of the keypad not being mapped the way i was used to. So I read forums about this and decided to download the t9 mapping. I unzipped the files on my computer and transfered them into a newly created folder inside of the windows folder....thats where things went bad. Now when I hit the start menu no icons load up, only the name of the program or application, and when i attempt to select it, i am prompted "error opening the shortcut or locating the filename. In essence the only thing I can do on my phone is text, call, or utilize any feature which is on the home screen. The worst part is I cannot syn to my computer as the usbstorage.ink is under the start program I screwed up royally, and I could use some insight from anyone who might be able to help me. Thank you in advance.
Click to expand...
Click to collapse
Was the file a zip or a cab?
On further inspection I found that you can sync the phone from the home screen, so I tried installing the Kavana rom again, but it keeps saying there is no device connected. It shows up on "my computer" as drive F. You can explore folders on it and such but I would ultimatly like to figure out how to redownload this OS, and not screw it up lol. Again any help is greatly appreciated
dashmaster1000 said:
Was the file a zip or a cab?
Click to expand...
Click to collapse
It was a cab, but the unzip option was there so i did... is this my original error?
sabiandrums3 said:
It was a cab, but the unzip option was there so i did... is this my original error?
Click to expand...
Click to collapse
Yea! Its cool though! You can go into settings and select clear storage instead of re-flashing and it will restore it to new ROM state and much safer then just copy paste the cab file into you device or storage card and click on the cab and it will install and do all the work for you! A cab is just a program that is sett up to install itself! Biggest thing to learn here is, dont be discouraged, read alot and learn as much as you can about your device! I started with a Dash and moved on to a Wing, now I have a Tilt running on T-Mobile! And i I remember correctly, I unzipped and installed a cab once too!
Now I am starting to cook my own ROMs and its only been a few months! Sorry. Ramling. Just wanted to encourage you! Hope I helped you out!
dashmaster1000 said:
Yea! Its cool though! You can go into settings and select clear storage instead of re-flashing and it will restore it to new ROM state and much safer then just copy paste the cab file into you device or storage card and click on the cab and it will install and do all the work for you! A cab is just a program that is sett up to install itself! Biggest thing to learn here is, dont be discouraged, read alot and learn as much as you can about your device! I started with a Dash and moved on to a Wing, now I have a Tilt running on T-Mobile! And i I remember correctly, I unzipped and installed a cab once too!
Now I am starting to cook my own ROMs and its only been a few months! Sorry. Ramling. Just wanted to encourage you! Hope I helped you out!
Click to expand...
Click to collapse
Your post is definitely inspiring me, unfortunately I cannot access the clear storage feature from the home screen, its one of the things i need the start menu for. I know theres got to be a way around this... but at least i learned something new about cab files!
sabiandrums3 said:
Your post is definitely inspiring me, unfortunately I cannot access the clear storage feature from the home screen, its one of the things i need the start menu for. I know theres got to be a way around this... but at least i learned something new about cab files!
Click to expand...
Click to collapse
No problem, just do a hard reset, same as clear storage! Click this link and follow intructions!
http://www.mobileviews.com/blog/2008/05/12/hard-reset-my-t-mobile-dash/comment-page-1/
Oh and dont worry! This guy makes it seem worse than it is, its perfectly safe!
Here is another link, more thorough!
http://www.good.com/faq/17957.html
dashmaster1000 said:
No problem, just do a hard reset, same as clear storage! Click this link and follow intructions!
http://www.mobileviews.com/blog/2008/05/12/hard-reset-my-t-mobile-dash/comment-page-1/
Oh and dont worry! This guy makes it seem worse than it is, its perfectly safe!
Here is another link, more thorough!
http://www.good.com/faq/17957.html
Click to expand...
Click to collapse
Thank you Dashmaster! its getting late here on the East Cost so im going to try this tomorrow and ill post what happens...again thank you so much!
sabiandrums3 said:
Thank you Dashmaster! its getting late here on the East Cost so im going to try this tomorrow and ill post what happens...again thank you so much!
Click to expand...
Click to collapse
You are very welcome! Glad I could help!
dashmaster1000 said:
You are very welcome! Glad I could help!
Click to expand...
Click to collapse
so i got ansy and couldnt wait for the morning....I hard reset the device, and everything worked perfectly! Better still I installed the cab and now I have a sweet new OS which looks and functions amazing, and now has the full keyboard working! I can see why you have chosen the posting name that you did thanks a bunch and happy holidays!
#4 - ADDED MY SOURCE FILES!!!! Just in case u wanna change something
Ok guys...here we go again I try my best to put some of t7he things i like into the same cab...looks huge...but looks nice Some of the best features without touching too much the rom. DISCOVER YOURSELF Is all I can say
1. Random contacts retouch
2. Volume retouch
3. M2D DJ Koa retouch and retouch with Landscape
4. workaround Honeycomb...DJ Koa retouch (best feature is with Josh 21198 v1 ...seems to be fast and skin works better)
5. Keyboard Skin
6. DJ Koa 6.5 Skin (i try to put big menus...but fixing)
7. ...some more tweaks specially on manilla
PS - I will keep adding/fixing things Hugs
Ai ai ai....people complaining about loosing data with this cab. Well..I tested pretty much times with different roms. In any case, please backup ur data before install and please: make sure you have enough space to install and work. And follow the proper steps down. Is easy. And please feedback with ur rom's so I can keep testing.
------------------------------------------
Pre-install:
YOU MUST HAVE A SDCARD!How to install?
1. DISABLE TOUCH OR M2D IN TODAY!
2. RUN CAB
3. DON'T LET IT SLEEP WHILE INSTALL!
More caps
Here some more caps...
Looks nice but how do we install two zip files?
Source files!
Ok my friends!!!! I decided to share with you guys the source files for this so that everything is clear If u feel u can change source.
I used Cabwiz to pack it. I FEEL THE Source!
1. Install cabwiz
2. Create a folder to cabwiz folder and unzip the inf into there
3. Unzip the other zips to same folder
4. Run ..\cabwiz "DJKOA M2D 1.00.4000.1903.inf" /compress
it will generate the CAB.
Cheers
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
thankssssssssssssssssssssssssss
Good stuff mate but this should be posted in Kaiser software section Anyway, going to have a spin at this.
piplewis said:
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
Click to expand...
Click to collapse
djkoa, this is probably because of a single file. Ussaully a dll will cause this. Some dll's don't like being installed via cab. They must be manually copied. Another problem could be that piplewis has a dll or file installed that can't be overwriten. Another usaully a dll problem. I've noticed some dll's, once you replace it, you can't replace it again. The work around I found is to rename said dll as .bak which will cause the ROM to use the original again and allowing the file to finally be replaced.
Overwise, great job, only ther suggestion. I thought about making 1 big cab myself, but realized large cab's are difficult to uninstalled. If the user changes 1 small thing, it won't uninstall and will cause them to need to hard reset. Have that problem with NeoTitanium. People change a registry or something and BAM, can't uninstall it.
piplewis said:
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
Click to expand...
Click to collapse
Same for me. Im really hoping we find a solution to this cuz this looks awesome. I dont have M2D installed though, i dont know if that matters.
drkfngthdragnlrd said:
djkoa, this is probably because of a single file. Ussaully a dll will cause this. Some dll's don't like being installed via cab. They must be manually copied. Another problem could be that piplewis has a dll or file installed that can't be overwriten. Another usaully a dll problem. I've noticed some dll's, once you replace it, you can't replace it again. The work around I found is to rename said dll as .bak which will cause the ROM to use the original again and allowing the file to finally be replaced.
Overwise, great job, only ther suggestion. I thought about making 1 big cab myself, but realized large cab's are difficult to uninstalled. If the user changes 1 small thing, it won't uninstall and will cause them to need to hard reset. Have that problem with NeoTitanium. People change a registry or something and BAM, can't uninstall it.
Click to expand...
Click to collapse
Pretty spot on when it comes to .dll You can make the the cab itself to step by step rename->copy it. Other than that its a ok project, one idea I thought of is whit youre project to make it more customizeable is to take advatage of one if the autoinstallers. And then make a folder whit all the cabs, if you make the whole SJABANG finish to go out of the box you can lateron change its contents aswell as the users themself.
I have 2-3 of theese setups myself whit payed content as stuff from lakeridge, SPB and so on. Making a cab is good training but not wery customizable in the loong run on this project IMO.
raiisak said:
Pretty spot on when it comes to .dll You can make the the cab itself to step by step rename->copy it. Other than that its a ok project, one idea I thought of is whit youre project to make it more customizeable is to take advatage of one if the autoinstallers. And then make a folder whit all the cabs, if you make the whole SJABANG finish to go out of the box you can lateron change its contents aswell as the users themself.
I have 2-3 of theese setups myself whit payed content as stuff from lakeridge, SPB and so on. Making a cab is good training but not wery customizable in the loong run on this project IMO.
Click to expand...
Click to collapse
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
drkfngthdragnlrd said:
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
Click to expand...
Click to collapse
Tricks of the trade ".bak reminds me of something "
Would just be better as seperate installs .cabs.
drkfngthdragnlrd said:
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
Click to expand...
Click to collapse
Getting the perfect setup is wery time consuming, its no secret that the order its installed, register strings overlap eachoter and so on will count for the final result. Reinstalling the cab just to have it removed from installed list doesnt mean you have a good uninstallation. Going from one setup to another whit several cabs when it comes to interface, its almsout inevitable that you going to hard reset to have a fresh installation.
My thought was that its easyer to update the package itself, not update the software on the phone
Ok, I disabled m2d and without soft resetting (after 1st attempt) tried to install again. This time it seems to have installed.
Just restarting now, will let you know.
*Edit*
Yup, seems to have installed fine now.
I can't uninstall......hardreset now
Hi, is it possible you can make this into a .cab.
piplewis said:
Ok, I disabled m2d and without soft resetting (after 1st attempt) tried to install again. This time it seems to have installed.
Just restarting now, will let you know.
Click to expand...
Click to collapse
Hmm, I think I am going to pass on this on for now. All brewed in like this is unlikly that im going to have a good installation IMO. Should be step by step whit whit atleast one reset as far as I could see (HTC HOME),. Good combination, no doubth. But to just gather everything in one big cab im not a fan of. Also I would take advatage of pre-xml in making of this
I dont mean to be critical in a bad way here, its good training and as I sad good combination. I didnt pop the setup.dll as I stopped looking after a minutt, clearly you havent used that much time on this mister Also this installation is expect upon that you have a SD card in phone upon installation (but who doesnt have that, but still a good thing to inform on).
I perform a remove it, run it and after about 5 minutes of it can not remove so I hardreset
after hardreset (keep in storage Kaiser) the entire all data on my storage end are lost, empty storage .... please help me,
So....anyone try it and check
sported said:
I perform a remove it, run it and after about 5 minutes of it can not remove so I hardreset
after hardreset (keep in storage Kaiser) the entire all data on my storage end are lost, empty storage .... please help me,
So....anyone try it and check
Click to expand...
Click to collapse
That is what happens when you hard reset the phone. All the data:contacts, messages, pictures, songs, etc. are lost. You should had used ppm backup (I think that is what its called) to save your contacts and messages on a sd card on computer.
dooyoo222 said:
That is what happens when you hard reset the phone. All the data:contacts, messages, pictures, songs, etc. are lost. You should had used ppm backup (I think that is what its called) to save your contacts and messages on a sd card on computer.
Click to expand...
Click to collapse
You probobly mean PIM backup and he can find it here: http://frifor.com/download/IBI/PIM_BACKUP_V2.8_MONX.CAB
Hi all !!
As you can see from the topic a wonderfull psone emulator is avaible for windows mobile, I haven't tested it yet because I haven't had much time but I have headr that it works great with our 1 ghz processor ! so let's try it out !
here the link : http://www.fpsece.net/
tested out this little beauty and works great!
I get a steady 60 fps in all games and has run everything i have threw at it!
all we need now is accelerometer support : /
also i cant get the hardware buttons working properly when i assign them a function : (
Yes i can confirm it s working great on s200,fullspeed or even a little better then on psx,and full audio in almost every game.The only problem is that you have to use a ps3 controller because of the resistive touchscreen that let you press only one button at time.I use zeemote controller with the gamepro driver to play but it s not a good controller,i think with dual shock 3 it s like to have a psx
work perfectly even with the accelerometre (for this you have to use the donate version of fpsece and have the HD2 sensor dll installed). The only game that i encounter problemes is with valkyrie profil. The Best playstation emulator on mobile (much better than the one on iphone or android).
salemxp said:
work perfectly even with the accelerometre (for this you have to use the donate version of fpsece and have the HD2 sensor dll installed).
Click to expand...
Click to collapse
Can you pls explain how you configured the gsensor?
I'm using the FpseCE-Supporter-Version, Arto's Sense 3.6-ROM with included HD2-Sensor-DLLs. Other accelerometer-games like HTC-Teeter are working fine, but with FpseCE I didn´t manage to get the gsensor working...
Would be very great if you could help! thx
freakyfreddy said:
Can you pls explain how you configured the gsensor?
I'm using the FpseCE-Supporter-Version, Arto's Sense 3.6-ROM with included HD2-Sensor-DLLs. Other accelerometer-games like HTC-Teeter are working fine, but with FpseCE I didn´t manage to get the gsensor working...
Would be very great if you could help! thx
Click to expand...
Click to collapse
first of all there's many video that you can see for enabled the gsensor on fpsece (here is a link http://www.youtube.com/watch?v=nOcvM8bHiZM). You also need a cab, that i found with the ocam rom's (thanks to him) witch is in russian, for calibrate your g sensor. Put your S200 flat on table, enable z_checkgsensor, and you have to tape on the grey box where you can see a 0. then it's done go too fpsece and enjoy. (Tomb raider or soul reaver with the g sensor is very funny, new game play i like it).
The cab is in attachment .
Hey salemxp,
big thanks for your help. I installed "Alternative SensorSDK by Amper.cab" and now gsensor works fine. Much more fun now to play ps-games
could you please posta little guide on make fpsece work on neotouch ? I did try one time but with no result....also I have some old original ps1 games but I don't remember how to get the image on the pc...
to get the iso's you can download some freeware called 'iso recorder' all instructions on how to use this should be on their website, or you can download them from http://romhustler.net/roms/psx and to the best of my knowledge because it is such an old system it is not illegal to download most games (any still copyrighted are not available on the site) : )
I'm trying to configure fpsece by now....how I have to set this : ArmCoreV5= ???
For everyone having problems running this emulator donload this package i ve made ,from megaupload,containing the emulator,the manual the bios folder with every bios for psx and fpse.ini preconfigured to load 7502 bios file.
http://www.megaupload.com/?d=5R8Y4SE5
instructions:
1 run anf install fpsece cab on your device
2 copy bios folder in the fpsece installation directory overwriting the one inside
3 copy the fpse.ini file in the fpsece installation directory overwriting the one inside
4 now you have only to ad your rom you can download the ones you own from internet,it s faster then make an iso.You can get many other helps reading instruction in the rar package
Fpsece is not mine (is made by a genius),and i think the bios files are legal since psx is abandonware,i only edited fpse.ini.My intention is only to make the installation process easy,so if someone doesn t like i post those files let me know
Yesterday i learned i can use even shooting games...Point blank series is awesome payed with resistive touchscreen of s200(better then on capacitive hd2,because resistive it s more precise).It s simply the best game i ve tried in a phone
Thank Axel85. I packed everything in one cab file. Just install it - no need to overwrite anything.
brainmaster you re the best... thank you.I download it even for me
gonna try it
Brain master, have u got it in .apk format for my x10?