Hi Friends,
Im using a HTC touch pro !
Whenever i connect usb cable to my Touch pro and PC,There is no prompt asking me to choose between active sync,disk drive and Internet sharing but gets connected to internet sharing automatically.
Please help me get the prompt back
go the settings - conections - usb to pc and choose what you want.
I have selected Active sync but still it directly opens ups internet sharing but there is no prompt at all.
there is an option to always ask, check it and see if you can make it work
Set this to 0:
Code:
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"DisablePopUpUI"=dword:00000001
Related
Hi.
I'm using the TP for quite some time now without too much hassle, but one thing annoys me.
For a few days the selection menu is gone when you connect your TP to USB. Normally it pops up a screen to select ActiveSync, FlashDrive or Internet Sharing mode.
Now, it just uses the last selection and I've never switched on the "Don't ask me again" button.
I've found the USB to PC settings which do about the same, but even if I switch on "Ask about connection type when I connect" it just doesn't. And then, I like the TouchFLO popup better.
Anyone a suggestion on how to get the selection screen back?
Thanks a bunch!
If you go to parameters, connexion, Usb parameters, you need to activate :
- Activesync (synchronise with Outlook)
- Activate the functionnality advanced netwerk
- Ask the type of connexion when connected
Same here.
im too afraid to tick the dont ask again box insase i cant find it again. it does sometimes not appear though
Perhaps the USB cable you use is not optimal.
Do you try also with the original one??
As strange as the menu disappeared, it was there again yesterday all of a sudden.
It appears "fixed" but I must agree, it doesn't show every time... Definately...
I would like to have my Fuze connected to my laptop via the usb cable for charging and activesync, but use my phones wifi for internet.
Problem is anytime I connect the USB cable it drops my phones wifi connection and starts using my laptops internet connection, which is a pain while listening to streaming music and disconnecting often to run an errand. Ideally would like to keep activesync going to allow using mymobiler.
Thanks for any help.
tds
tds said:
I would like to have my Fuze connected to my laptop via the usb cable for charging and activesync, but use my phones wifi for internet.
Problem is anytime I connect the USB cable it drops my phones wifi connection and starts using my laptops internet connection, which is a pain while listening to streaming music and disconnecting often to run an errand. Ideally would like to keep activesync going to allow using mymobiler.
Thanks for any help.
tds
Click to expand...
Click to collapse
start -> settings -> usb to pc -> uncheck advanced network functionality
Next time search my friend.
Close thread please!
Mod edit : Shazad, Please respect other users and we will decide what and when to close, thank you.
> "start -> settings -> usb to pc -> uncheck advanced network functionality"
I recalled that option on my Hermes, but it appears different on the TP. I don't have the "advanced network functionality option. Attached are the options I see under Start->Settings->Connections->USB to PC. Only get options for ActiveSync and Disk Drive modes. Disk Drive mode disables activesync and hence MyMobiler.
I did a pretty extensive search using the the forum search option as well as site specific google with terms/combo's like usb, activesync, wifi, enable, internet connection, sharing,... but didn't find anything related to allowing phone wifi use while connected to a PC which is connected to the internet.
tds
I have a Topaz and I experiened a similar problem - Internet Connection Sharing comes on automatically everytime I plug a USB cable between it and my computer, but I didn't activate it - the mode was supposed to be "Disk Drive Mode" on settings\connections\USB to PC, but there was no option to disable it either.
I had just found the solution -
1. with USB cable disconnected, select "Ask me first" on the USB to PC setup, click OK.
2. Connect USB cable to PC. The 3 choices come up from a HTC setup screen:
o Activesync
o Disk Drive
* Internet Connection Sharing
o Don't ask me again
DONE
QUICKLY click "Disk Drive" radio button AND check "Don't ask me again" AND click Done below it BEFORE internet connection sharing comes up. It will now stay in disk drive mode.
See if it works?
Hi:
WM6.5 cooked in a Diamond. When connecting the USB cable, three options: ActiveSync, use as HD and Internet Sharing. By mistake I selected the check box "always do this and don't ask again" (or something like that), having chosen the Internet Sharing. Now, of course, every time I connect by USB, Internet Sharing starts without further options.
The question: how can I recover the options screen in order to choose, when I insert the USB cable, the original three options?
Thanks in advance!
Pani
Settings>Connections>USB to PC
There's an option at the bottom that allows you to get that prompt back
No way. That option doesn't do reappear the prompt, even if it seems exactly what should happen...
it's a windows thing
find and remove autostart for your phones in the pc registry
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MountPoints2
Hello,
First off, I'm owning a Samsung Omnia Qwerty (B7610) and I have a problem...
I'm trying to create a backup of my contacts by using the Samsung PC Studio software. Whenever I connect my USB cable to my phone, I usually get a selection menu whether to select "PC Studio", "Mass Storage" or "Active Sync". However, this menu is gone. Whenever I plug the cable in, it just starts with Active Sync (or Mass Storage) as defined in the settings screen. However, these things won't coöperate with the PC Studio software.
Is there any way to get this menu back when I connect my USB cable to my phone?
If you don't know what I'm asking about, here's a picture that somewhat looks like the menu I'm trying to get:
byteshift.net/scr000014.jpg or byteshift.net/98835935.jpg
n.b.: put (www) before the links!
Thanks in advance.
#edit: this outside-link restriction thingy is annoying =[
I was looking for this just now too. I found it in Settings / All Settings / Connections / USB to PC.
Hi, I have been struggling for days, to try to get internet on my Smartphone via Bluetooth on my Desktop PC, is Data is massivly Expensive in this country. Whenever I go to Connetions > add new connection for Bluetooth, and I add a new Device, I see my Desktop PC there. However when I see the services, all I see is Activesync, I select that, push save, and it just goes back to add a new device again. I also tried, to connect via the Bluetooth PAN Device, on my PC, and I choose connect using access point, it gives me an error. "The connection with the Bluetooth Device failed. The device may be already connected to another computer, or it may be need to be configured to accept connections from this computer. Consult your device documentation for further information.
Please can someone help me?
Thanks