late to the party... VEGAn and Data2loop - G Tablet General

I just went from TnTLite to VEGAn and am catching up on the Data2loop updates. Is there an update.zip format for this or is it unstable for VEGAn a well? My quadrant scores from the install seem to indicate that it was not part of the current build.

Here is the dataloop in update.zip format.
roebeet said:
Link: http://www.mediafire.com/?h2zesah4r6l8owq
Tested on VEGAn beta 5.1, also the prototype was tested on TnT Lite with no issues. They share the same busybox, so I expected them to both work. I have been told that this will NOT work on zPad (clean), and cm6.x is unknown.
Basically, I took Chenglu's adb script and altered it slightly, ripping out busybox and altering the shell script to use the one we already have in place. Seems to work fine. And this is an update.zip file, no adb needed. The zip runs very quickly, like 1-2 seconds (it's just copying two files and altering perms on them).
Caveats: It takes a really long time to reboot, like 3 to 4 minutes. Just let it finish. The 2nd reboot took maybe 10-15 seconds longer than usual, and the third reboot seemed to be normal time.
EDIT: Also, as always -- USE AT YOUR OWN RISK. I heard at least one user who had an issue with this. Given what it's doing, I don't even know if I would add this to a TnT Lite supplement - it might have to be in a base image only. Backup your data first, please!
Click to expand...
Click to collapse
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk

Related

[FIXED] [ROM] CyanogenMod 4.2.5 PLUS RAM hack, better a2sd, auto swap, nav/facebook

I would suggest doing a Nandroid backup - just in case
Download: http://www.mediafire.com/?umznkzjtgdz
Someone mentioned a bug for a couple app crashes
All right, screw it. I am going to remove the CM stuff and just push the nav/fb, ram hack, etc as just an incremental update
To-Do:
Music.apk - Rewrite to ignore music less than 30sec long (aka voicemails)
BFS 310 Kernel with 10mb RAM hack (BFS 310 hasn't been tested by anyone else yet, why not try)
Add Fix_Permissions v2.03 (running the default 1.31 right now)
ZipAlign all apps (including Google apps)
[Suggest more!]
Converting from Cliq/Hero/1.5 - see below for instructions
Need Google Apps - see below for instructions
Includes:
10mb hack - working on adding bfs310 (seriously if you can help PLEASE DO)
Google Navigation works
Facebook included
Includes HTC IME
Clears cache of old files
Installs RA Recovery
MANY MANY TWEAKS
Adjusted a2sd (mt3g: one time copy from /system/sd to data for apps)
Note: this discontinues A2SD from then on for better performance after apps have been copied, am making script to copy back to SD
For fastest possible speed: have a swap partition on your SD card
The ROM will load a2sd for G1's
If you don't have /system/sd (and just swap partition), it will swapon to that
Trick is it utilises both Cyanogen's compcache plus the swap
Then with 10mb hack - hell this is a perfectly fast ROM
See at the bottom if you need Google Apps (starting on clean build or converting from any 1.5 ROM (Hero/Cliq) OR if you are starting with a blank phone lol (aka no system partition at all))
Hero/Cliq/1.5: Yyou will have to run the thing at the bottom for your phone to convert to 1.6 Donut - run that first, then run main zip).. if you still have probs see the bottom of this post
If you are switching from Hero or Cliq see the bottom
This rom does NOT include Google Apps
Install this first for Google Apps:
http://www.mediafire.com/?z3ozzmyzrad
If coming from Hero/Cliq
Run recovery mode
Hit console
Type these commands:
mount /data
cd /data/data
rm -r com.google.*
rm -r com.htc.*
rm -r com.android.*
Thanks to Cyanogen, Maxisma(for my base on a2sd), daproy (RAM hack),
Amon_RA (recovery image)
For help:
Search on Wave for the title of this post
Follow me on Twitter @wesgarner
wesgarner said:
Trick is it utilises both Cyanogen's compcache plus the swap for a very FAST build
Click to expand...
Click to collapse
I remember reading somewhere that this will lead to problems, and should not be done. From my understanding you should use one or the other, not both.
(otherwise wouldn't we see alot more Devs using that trick?)
can a no wipe update be done from cm 4.2.5?
Thanks for you~
hey guys Good work
Only thing ive ever had come out of the 10mb hack was random reboots, random ringtones. phone ringing when noone was calling. crashing getting texts...
But thanks for the effort lol
Didn't work. Caused me to get stuck on G1 boot screen for an hour. Then totally wiped and again sat there on the G1 boot screen. What is odd is that for some reason my recovery image disappeared and went to JF 1.42 so I couldn't even use recovery. Now I am trying to get my phone back to the way it was.
Fortunately, I still had all the files I needed on my SD card to get me back to where I was. i reinstalled the recovery image and then was able to load my recovery image again. How it got to JF 1.42 (which hasn't been on the phone is many months) is beyond me. I have been doing phone mods for many years and this is the first one that didn't work out.
So, no go?
Unexpected end of Archive......
I tried to do the same thing (cm 2.4.5 + ramhack + swap) but got nowhere, system became sluggish. This should work very well in theory (this should be fast as dwang but with all cm goodies) but I haven't been able to make it work so I'm following this thread and see how it works.
pascanu said:
I tried to do the same thing (cm 2.4.5 + ramhack + swap) but got nowhere, system became sluggish. This should work very well in theory (this should be fast as dwang but with all cm goodies) but I haven't been able to make it work so I'm following this thread and see how it works.
Click to expand...
Click to collapse
i used to run CM 2.4.x with ramhack and swap no problem, but since 2.4.5 the ramhack slowed my system down so much i just decided it would be better to go without it
btmec said:
Didn't work. Caused me to get stuck on G1 boot screen for an hour. Then totally wiped and again sat there on the G1 boot screen. What is odd is that for some reason my recovery image disappeared and went to JF 1.42 so I couldn't even use recovery. Now I am trying to get my phone back to the way it was.
Fortunately, I still had all the files I needed on my SD card to get me back to where I was. i reinstalled the recovery image and then was able to load my recovery image again. How it got to JF 1.42 (which hasn't been on the phone is many months) is beyond me. I have been doing phone mods for many years and this is the first one that didn't work out.
Click to expand...
Click to collapse
Looking into the G1 bug now, did you get a logcat?
Going to try to test on my old G1 in a few, if you have Wave get on there if you want to help debug
sacredsoul said:
can a no wipe update be done from cm 4.2.5?
Click to expand...
Click to collapse
Yup no wipe
no work.
Did not work ... G1 stays in boot screen and reboot ...
Takenover83 said:
I remember reading somewhere that this will lead to problems, and should not be done. From my understanding you should use one or the other, not both.
(otherwise wouldn't we see alot more Devs using that trick?)
Click to expand...
Click to collapse
Well with the newer compcache modules, it doesn't seem to cause any problems
grafyman said:
Did not work ... G1 stays in boot screen and reboot ...
Click to expand...
Click to collapse
Yea I am about to test on my G1 to look around for the bug - my main phone is my myTouch so I didn't test before I posted LOL - my bad on that (it is just in this recent version since worked fine on a friend's G1 before this post)
If you have wave, could you get on there if you want to help debug?
If you have a logcat, just post it here or on pastebin and shoot me the link on Twitter (@wesgarner)
One big thing I am trying to work on here is going through and doing some things Cyanogen couldn't do
Next version I am going to do zipalign on the Google Apps to post that (on a sep update zip for people who prefer to stay legal, hope I don't get a D&S - don't think anyone else has)
I am thinking about doing a choose your kernel like Cyrowski did here - good idea?
Please give any suggestions, this just seems a good way to do some playing around and experimenting that is a project by everybody - developers and users
Also, next project: Write a test into Music.apk to ignore files less than 30sec (I have my voicemails through Visual Voicemail and Google Voice)
It is annoying as crap! Going to get the GIT for Music.apk later today
Can someone mirror this or create a torrent? media fire is so slow today
Ok im seeding but warning if you go from 4.2.5 like me you may get a boot loop like i am right now good thing i backed up
Torrent link: http://bit.ly/blah234
guys this rom is ****. i flashed a number of times, then i wiped all partitions and tried again. dosent work just g1 boot loops, im going to stop seeding. dont trust this guy this rom is bad
LOL, dude, why are people keep thinking any Rom based on the same rom works better? Wake up people. If you use Cyanogen, use Cyanogen, If you use Dwang, use Dwang. any other so call hack does not make it better. Wake up, wake Up. Wake Up. LOL.
I have been using the so call Ram hack, it does NOT make it better after long hour of usage. It slows it down. At least on my G1. I reverted back to Stock boot img, it just WORKS.

OK..switching from vegantab 5.1.1 to Calkulin

First...appologies to those who get frustrated with the newb who shouldn't attempt this if they have to ask how....
I am fortunate to own a GTAB that came already loaded with Vegan 5.1.1 and so I have not had the opportunity to do any tinkering myself. I have read the sticky on CWM and the process seems simple enough. I have read through the threads on the various ROMS but have not read of anything that seems complete enough or enough of an upgrade to make me want to switch from Vegan..... until Calkulin.
Of course the ROM I want is the one that seems to stray from the simple use CWM method. Specifically as it relates to backup and recovery. Right now Vegan is very stable and does everything I want it to do. So, why change... because from what I have read, Calkulin's ROM does everything, is stable, and does it with overclocking built in. And I can't help myself.
If my Tab goes all Charlie Sheen with this upgarade, I need to be able to find my way back. I can use CWM to make a backup of my current setup however I am concerned that all the other steps for this ROM ( using Calkulin's format and nvflash) will obliterate my backup and my CWM install for that matter.
I can use a search function. I am not asking to be spoon fed. Vegantab 5.1.1 is arguably one of the most installed ROMS on the GTAB and I'm sure there are many people who will want to take this route to Calkulin. If someone has made this jump, I think that they would be helping out many here by posting a step by step or at the very least, a what to be careful of post.
crutzulee said:
Calkulin's ROM does everything, is stable, and does it with overclocking built in. And I can't help myself.
Click to expand...
Click to collapse
It does not support overclocking, as none of the kernels do at this time (unless that has changed since last night). Honestly, unless you want to tinker for the sake of tinkering, I'd leave Vegan on there.
Um, Calkulin gTab 1.1 doesn't require anything special to flash it. It was about as easy as it gets. Use CWM recovery to run his format all.zip, his rom update.zip, and if you want a custom kernal update.zip. Reboot and you are done.
Make a backup and copy your cwm file to a PC as a backup. I would use the format all if switching from vegan to a tnt lite varient. Also I would invest in titanium backup. It will save all your apps and data that you can back up on PC and restore after a new rom is flashed.
That said, I say stick with vegan. I love to tinker but I always come back to vegan 5.1.1.
Good luck
OK, I totally suck....
My head got turned inside out. I confused Calkulin' s format all zip with the one in this thread:
http://forum.xda-developers.com/showthread.php?t=974422
and started to think that this process was a lot more involved. I guess researching too much is not always a good thing.
@ramerco I suppose you have flashed from Vegan to Calkulin's. I guess his format all.zip doesn't take CWM off like the one from the other post? Is switching back and forth as easy as choosing your backup?
crutzulee said:
OK, I totally suck....
My head got turned inside out. I confused Calkulin' s format all zip with the one in this thread:
http://forum.xda-developers.com/showthread.php?t=974422
and started to think that this process was a lot more involved. I guess researching too much is not always a good thing.
@ramerco I suppose you have flashed from Vegan to Calkulin's. I guess his format all.zip doesn't take CWM off like the one from the other post? Is switching back and forth as easy as choosing your backup?
Click to expand...
Click to collapse
I've been switching from TnT-Lite/VeganB511/Vegan7 GB/Calkuin's multiple times just using CWM backup/restore with no issue.
Remember to do 3 wipes before restore or flashing firmwares:
- Wipe data/factory reset.
- Wipe cache.
- Wipe Dalvik cache
@rickyt63 Are you doing these three wipes instead of Calkulin's format all or in conjunction with it.
Also to those who have tried both Vegan 5.1.1, Vegan 7 and Calkulin can you give your brief comparisons of these three? Pros, cons, which do you prefer? Why?
I also have been doing a lot of switching between 5.1.1 tnt lite vegan ginger experimentals just using CWM like above - you just need to do a factory reset wipe cache and the dalvic cache. I think it helps to wipe dalvik cache again after the ROM is flashed. Calkulins Rom is by far the fastest and when you flash clemsyn's froyo v3 kernel on top of that you get a great result. Titanium backup allows you to easily restore all your apps and settings even after a factory reset
Clemsyn said that he has a new kernel tweaked just for calkulins rom which he may release soon.
Thanks for the clarification, rocky3. The guy I bought the GTAB from used CWM to erased all his user data before he gave it to me but I know that I either have Titanium backup on there or have the .apk in my download folder.
I'm off to learn more. Thanks again!
crutzulee said:
@rickyt63 Are you doing these three wipes instead of Calkulin's format all or in conjunction with it.
Also to those who have tried both Vegan 5.1.1, Vegan 7 and Calkulin can you give your brief comparisons of these three? Pros, cons, which do you prefer? Why?
Click to expand...
Click to collapse
I did not use Calkulin's format when switching roms. Only 3 wipes.
Here are some thoughts about Roms: They're all fast and stable IMO.
1) TnT-Lite V4.2.5: Quadrant score ~ 2400.
- Pro: Fast and stable. Did not delete media from sdcard2.
- Con: boot up seems a little slow due to sdcard2 scanning, but after scanning it's fast.
2) Vegan V1B5.1.1: Quadrant score ~ 2600-2700.
- Pro: Fast and stable. A tad faster than TnT-Lite.
- Con: media delete from sdcard2. fixed: create a ".nomedia" file in sdcard2.
3) Calkulin V1.1: Quadrant score ~ 2600-2700.
- Pro: Fast and stable. A tad faster than TnT-Lite. Monster Madness run flawlessly.
- Con: media delete from sdcard2. fixed: create a ".nomedia" file in sdcard2.
4) Vegan7 Ginger Bread Experimental
- Pro: Fast, Nice Ginger Bread UI
- Con: Audio still clunky, some games don't work properly vs. TnT-Lite/Vegan V1B511
BTW, I use TnT-Lite or Vegan V1B511 as daily driver.
Hope this help.
Rich, thanks so much for your reply! When I look at your evaluation of vegan 5.1.1 and calkulin and I couple that with Butch's advice here and elsewhere, it makes my decision easy. For now, I will stay put with Vegan.
At some point, I will have to nvflash back to stock in order to take a viewsonic update ( I assume this will be the only way to get a honeycomb based rom, if that is even in the cards for the gtab). At this point, it doesn't seem that there is anything out there worth risking what I have now... a perfectly stable rom which does everything I need it to do with a full market.
I still get the itch to change up my tab even though I love where I'm at with VEGAn beta5.1.1, so I started changing themes, bootanimations and boot logos. There are some pretty cool themes made by gto777 that flash with cwm or metamorph. You can find those in the apps and themes thread. Awesome boot animations can also be found there along with instructions on how to load them. If you already know that nvflash is in your future you may want to get a little practice in with it early by changing your boot logo. Nothing made me happier than getting rid of the birds on boot and changing it out for a nvidia tegra2 logo. Its a fun task and there have been people posting their custom boot images for use on the sticky thread in the above mentioned section. Thinking I may re do mine this weekend, saw someone had put their name, number and email on the boot logo. Pretty cool feture as the boot logo survives through rom flashing. Seams pretty handy in cases of loss or theft.
Anyway hope this helps with the flashing itch. Have fun!
OK, so it seems that today's announcement puts honeycreams even further out of our reach.
I can't see myself making changes just for cosmetic purposes. I would only change for either a performance increase or greater compatability with newer software.
It seems that vegantab 5.1.1 will be it for me for a while until maybe the gingerbread version is fully baked.

[ROM INFO] CM7 Nightlies Discussion

maxdamage2122 said:
Since "official" nightlys have not been compiling for the g-tablet, I have been compoiling them myself on my personal computer. I'll compile the source every so often and upload it here https://www.dropbox.com/s/w3vhon1u5a2orsk/smb_a1002/kang?v=l. The time stamp in the file name (MMDDYYYY-HHMM) is the time that the repo sync was done.
In the meantime I'm setting up an old computer that I have as a buildbot to automatically compile every night for us. I'll let you guys know when I have it up and running.
Click to expand...
Click to collapse
I thought it might be nice to get a thread going for discussion on the CM7 port for harmony for our gtablet device. There are nightly builds which are starting to incorporate some great things such as video acceleration and the new google release of 2.3.4 could be around the corner. In fact some 2.3.4 code made it into nightly#60.
I am in no way associated with CM7. If someone from CM7 or someone in some way associated with CM7 wants to run this thread or create a similar one please do so.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Rule #1 of CyanogenMod: Don't ask about release dates.
CM7 Harmony Stable Releases
http://mirror.teamdouche.net/?device=harmony&type=stable
CM7 Harmony Nightly Releases
http://mirror.teamdouche.net/?device=harmony&type=nightly
Changelog
http://cm-nightlies.appspot.com/?device=harmony
Tablet Tweaks II (original TT is already incorporated)
http://forum.xda-developers.com/showthread.php?t=1002000
For firsties...
How-To Guide:
(slightly edited from Wiki http://wiki.cyanogenmod.com/index.php?title=Viewsonic_G_Tablet:_Full_Update_Guide)
Before you do anything — Make a backup
Don't forget to back up your data. If you have synced the device with a Google account, then the contacts, calendar, Gmail & select other Google-related data will not be lost and will come back after the next sync. However, you should backup anything you want to keep that is not stored on the SD card:
Bookmarks,
Applications; use Titanium Backup or the Astro File Manager, for example,
Any application data not on the SD card.
It would also be a good idea to backup everything stored on the SD card in the rare case the SD card must be formatted to resolve any major problems.
Backup for Root Users is a free application that can assist with backing up your data.
Installing ClockworkMod Recovery
For this guide, it is not necessary to root the Viewsonic G Tablet in order to flash CyanogenMod. You can simply install ClockworkMod Recovery & continue on.
Warning: Installing ClockworkMod Recovery on the Viewsonic G Tablet will void the warranty.
Download the ClockworkMod package: Download
Unzip the ClockworkMod package & copy the recovery folder & the update.zip to the root of the internal memory (NOT in any folders & NOT to the removable SD card).
Power off the Viewsonic G Tablet and reboot holding the Volume Up button and the Power button until the device is in the stock recovery.
While in the stock recovery, use the Volume buttons to navigate to the apply update.zip & press the Home button to select it.
Once the it the update.zip is applied the Viewsonic G Tablet will have ClockworkMod Recovery. Please continue to the next section.
Flashing CyanogenMod
*******************
adampdx said:
...according to this tweet we're not supposed to flash between the stable releases and the nightlies. ....
Click to expand...
Click to collapse
*******************
jerdog said:
Echoing the above -
DO NOT USE ROM MANAGER ON THE VIEWSONIC GTABLET!!!!! IT WILL BORK YOUR DEVICE 99% OF THE TIME. MAGIC VALUE MISMATCH AND OTHER ASSORTED ERRORS.
We've been dealing with these issues for months now - don't discount because you think you know better because you've used it on XYZ phone.
IT CAUSES ISSUES ON THE GTABLET. PLEASE EDIT YOUR OP TO REFLECT THIS. THERE ARE POSTS ALL OVER HERE DETAILING THIS. PLEASE ALSO POST A LINK TO BEKIT's CWM .8 - THAT IS THE ONE THAT WAS MODIFIED TO WORK WITH THE GTABLET GIVEN THE MULTIPLE QUALITY CONTROL ISSUES ASSOCIATED WITH THE PARTITIONS AND WHAT NOT.
Click to expand...
Click to collapse
Place the CyanogenMod update.zip file on the root of the SD card.
Optional: Place the Google Apps .zip on the root of the SD card also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the CyanogenMod update.zip.
Optional: Install the Google Apps by performing steps 7 - 9 again and choosing the Google Apps update.zip.
Once the installation has finished, select +++++Go Back+++++ to get back to the main menu, and select the Reboot system now option. The Viewsonic G Tablet should now boot into CyanogenMod.
Having issues with finding your Internal Storage?
Check your fstab. CM has a different paradigm. See below from maxdamage2122
maxdamage2122 said:
This is a flashable zip file that I have created to backup the vold.fstab file and replace it with one that mounts the internal storage as /sdcard.
http://goo.gl/DS8u9
Click to expand...
Click to collapse
Edit: Thanks and props to the CM team and all involved. No thanks to me, I am just a copy/past whore.
Edit: Removed RomManager Method (thanks badfrog and jerdog)
Edit: Added reference to fstab mod. Thanks maxdamages 2122
Do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
Great job Oozura. Make sure Mad-Murdoch links this thread in his post in the nook forum. I had volunteered to do the same but he didn't get back to me. I'm a long time CM nightlies user on Droid, and now on GTab as well. I'll post as much as I can here.
And that bad frog is right. Use bekit's 0.8 GTab recovery and forget about Rom Manager. You'll just end up having to nvflash...
Thanks!
MC
thebadfrog said:
Do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
do not use rom manager on the gtab
do not use anything but bekit 0.8 recovery
Click to expand...
Click to collapse
Are you sure about this? If so I dont mind editing that part of the CM instructions.
Echoing the above -
DO NOT USE ROM MANAGER ON THE VIEWSONIC GTABLET!!!!! IT WILL BORK YOUR DEVICE 99% OF THE TIME. MAGIC VALUE MISMATCH AND OTHER ASSORTED ERRORS.
We've been dealing with these issues for months now - don't discount because you think you know better because you've used it on XYZ phone.
IT CAUSES ISSUES ON THE GTABLET. PLEASE EDIT YOUR OP TO REFLECT THIS. THERE ARE POSTS ALL OVER HERE DETAILING THIS. PLEASE ALSO POST A LINK TO BEKIT's CWM .8 - THAT IS THE ONE THAT WAS MODIFIED TO WORK WITH THE GTABLET GIVEN THE MULTIPLE QUALITY CONTROL ISSUES ASSOCIATED WITH THE PARTITIONS AND WHAT NOT.
Search for the endless threads on hard bricked and soft bricked tabs from using rom manager on the gtab. And before all you fanbois jump in and tell me you had no problems understand this....there are at least 2 different partitioning setups on the Gtab from the factory. Sometimes you can't even boot after flashing Gingerbread roms without nvflash.
MicroChip said:
Great job Oozura. Make sure Mad-Murdoch links this thread in his post in the nook forum. I had volunteered to do the same but he didn't get back to me. I'm a long time CM nightlies user on Droid, and now on GTab as well. I'll post as much as I can here.
Thanks!
MC
Click to expand...
Click to collapse
Been a long time droid, dInc user. I had sent you a PM about half way through the OP but decided what the heck. I hope this helps keeps discussion in one place for our gtab and CM7 (soon to be 7.1)
Oozura said:
Are you sure about this? If so I dont mind editing that part of the CM instructions.
Click to expand...
Click to collapse
Yes, I'm sure he is sure about this. Do NOT use Rom Manager to install any of the roms or to update CWM. Only use bekit 0.8 recovery.
I don't even install Rom Manager on my Gtab.
thebadfrog said:
Search for the endless threads on hard bricked and soft bricked tabs from using rom manager on the gtab. And before all you fanbois jump in and tell me you had no problems understand this....there are at least 2 different partitioning setups on the Gtab from the factory. Sometimes you can't even boot after flashing Gingerbread roms without nvflash.
Click to expand...
Click to collapse
Sounds good to me. I will take it out. As long as the other method works then no need to make anyone cry over a bricked tab.
+10000 I learned this the hard way on day one.
Sent from my CM7 GTablet
Oozura said:
Sounds good to me. I will take it out. As long as the other method works then no need to make anyone cry over a bricked tab.
Click to expand...
Click to collapse
Please - don't just take it out - add a warning about it. And provide the link to the known working CWM (Bekit .8).
RomManager method removed
OP Edited. Thanks.
jerdog said:
Please - don't just take it out - add a warning about it. And provide the link to the known working CWM (Bekit .8).
Click to expand...
Click to collapse
I quoted your post. Link was already there to correct version in the clockwork mod package. thanks.
Thank you. There is something flakey about these devices and they don'y like Rom Manager
So who is using the latest nightly? I'm running 60 and seems stable. I occasionally get a stall on browser apps after a long sleep. But can't find any other issues.
Sent from my ADR6300 using Tapatalk
Oozura said:
So who is using the latest nightly? I'm running 60 and seems stable. I occasionally get a stall on browser apps after a long sleep. But can't find any other issues.
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
I am. No issues to report, camera is still grainy. Video playback is still great.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Hardware Decoding?
So I installed AOSP the other day (the one in the Dev forum) because it was claiming hardware acceleration. It loaded up and was super laggy, but also didn't play the same video files that Vegan 5 played. I loaded up CM7 today and found the same thing. It's not nearly as laggy as the AOSP build, but still does not play video. I get volume, but no sound. Am I mistaken is thinking that we in fact have hardware acceleration now?
adampdx said:
So I installed AOSP the other day (the one in the Dev forum) because it was claiming hardware acceleration. It loaded up and was super laggy, but also didn't play the same video files that Vegan 5 played. I loaded up CM7 today and found the same thing. It's not nearly as laggy as the AOSP build, but still does not play video. I get volume, but no sound. Am I mistaken is thinking that we in fact have hardware acceleration now?
Click to expand...
Click to collapse
Progress is being made but we aren't there yet. Did you try mobo player? Engage software decoding and you'll be good to go.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
I've been using RockPlayer and havent had any issues. Most notably for me though was YouTube HD videos now play with no lag.
I think Irs421 is right. Its progress but not complete hardware acceleration until Nvidia releases GB drivers I would guess.
I figured as much. Progress, even slow progress, is good. I'm liking CM7 so far any how.

[Q] Install AOR through openrecovery

Hi,
I have openrecovery installed on my XT720 but I want to know how I can install AOR.
Does I have simply to change openrecovery zip by AOR one or does I have to do another think ?
Thank you
unzip the openrecovery 3_3 thing. there will be 2 things inside: an update.zip and a openrecovery folder. copy both into the root of your sd card. then you computer will ask you whether you want to replace the openrecovery folder already on ur sd card, and you should click yes. once both are on, you are done. AOR is full of features, haha. i just learnt this a few days ago.
eejin2 said:
unzip the openrecovery 3_3 thing. there will be 2 things inside: an update.zip and a openrecovery folder. copy both into the root of your sd card. then you computer will ask you whether you want to replace the openrecovery folder already on ur sd card, and you should click yes. once both are on, you are done. AOR is full of features, haha. i just learnt this a few days ago.
Click to expand...
Click to collapse
Thank you, I will try.
EDIT : It works good, I made a mistake, I deleted openrecovery.zip from sdcard, this file must stay or openrecovery fail and there is to pull battery to reboot.
Do you know where to find script to check sdcard error ?
its somewhere in AOR. just look around the AOR utilities thing. you should use zipalign. my phone feels slightly smoother. adblock works for most apps i think, except for angry birds and a few others. prevents these ads from loading up. they clutter the screen. you can also adjust the heap size in AOR. im using 40mb. heavy apps run more smoothly, but if u launch an app within an app, the original app might get killed because 40mb might not be enough to run 2 apps. but its ok for me. i dont usually do a lot of multi tasking.
eejin2 said:
its somewhere in AOR. just look around the AOR utilities thing. you should use zipalign. my phone feels slightly smoother. adblock works for most apps i think, except for angry birds and a few others. prevents these ads from loading up. they clutter the screen. you can also adjust the heap size in AOR. im using 40mb. heavy apps run more smoothly, but if u launch an app within an app, the original app might get killed because 40mb might not be enough to run 2 apps. but its ok for me. i dont usually do a lot of multi tasking.
Click to expand...
Click to collapse
I will try but for ads, I use droidwall, it's a firewall so, you can block 3g and wifi for each app.
Zachary57 said:
Do you know where to find script to check sdcard error ?
Click to expand...
Click to collapse
Go to Menu Utilities and it is options 4 and 5. Scan disk and Scan sd-ext. I use both b/c if your partition is corrupted, it will show and try to fix it. I actually do this both before and after I flash a new ROM just to make sure it will "accept" the new ROM and also to make sure it has "accepted" it and that part is working correctly before I ever get into the new ROM.
Fix permissions works well too, btw. Also be careful messing with the VM heap size b/c most of our ROMs already have this paramenter set. It is usually on the front page of the ROMs description like on Kahl's V4 ROM for example. And one final, don't mess with the basebands, it will F%^& your phone up.
Sorry, this is the final thought. Make sure you are aware that the modding menus are based on Kernals, so most of the Froyo things, although we are on a hacked Froyo, probably won't work and may screw something up. The Eclair menu has JIT and Memhack, we already have those. They (modding menus) are mostly if you are running stock 2.1 or stock 2.2 (which no one is running stock 2.2 at this point).
Woodrube said:
Go to Menu Utilities and it is options 4 and 5. Scan disk and Scan sd-ext. I use both b/c if your partition is corrupted, it will show and try to fix it. I actually do this both before and after I flash a new ROM just to make sure it will "accept" the new ROM and also to make sure it has "accepted" it and that part is working correctly before I ever get into the new ROM.
Fix permissions works well too, btw. Also be careful messing with the VM heap size b/c most of our ROMs already have this paramenter set. It is usually on the front page of the ROMs description like on Kahl's V4 ROM for example. And one final, don't mess with the basebands, it will F%^& your phone up.
Sorry, this is the final thought. Make sure you are aware that the modding menus are based on Kernals, so most of the Froyo things, although we are on a hacked Froyo, probably won't work and may screw something up. The Eclair menu has JIT and Memhack, we already have those. They (modding menus) are mostly if you are running stock 2.1 or stock 2.2 (which no one is running stock 2.2 at this point).
Click to expand...
Click to collapse
Thank you, I didn't found this last time but I did'nt check in eclair utilitie menu so, I mean it's on it.

Root on fire HD 10 - but no custom recovery or ROMs?

Can someone help me understand how we can have root methods for the HD 10, but no custom recovery or ROMs?
Any news or updates on the effort here? I'm willing to pay or donate to get it done!
I REALLY want to turn my tablet into an Android tablet... Not a fire tablet with an almost Android experience.
If we can get some one to create safestrap probably we can have a custom Rom !ade
There's no ROM(s) because root was just gained in December. So far as I know, no developers own a HD 10 (at least none that have said so) so no one is able to build one. I am willing to try, but unfortunately I don't have all the resources yet. There is no custom recovery because the bootloader is still locked (so far as I know). Its very hard, almost impossible to get a custom recovery on a locked device. Give it some more time. Maybe @ggow will surprise us.
DragonFire1024 said:
There's no ROM(s) because root was just gained in December. So far as I know, no developers own a HD 10 (at least none that have said so) so no one is able to build one. I am willing to try, but unfortunately I don't have all the resources yet. There is no custom recovery because the bootloader is still locked (so far as I know). Its very hard, almost impossible to get a custom recovery on a locked device. Give it some more time. Maybe @ggow will surprise us.
Click to expand...
Click to collapse
I have a 'maybe dumb' problem, because we only can flash with FlashFire.
Months ago, I owned a Samsung Galaxy Core Prime. I tried to compile Oreo for it. But, what happened to me is, before I get the ROM to BOOT, I compiled it exactly 17 times, fixing bugs. I never had a problem because I had the TWRP handy, but in this case we will not have a custom recovery at all. If the ROM fails to boot, we'll have to sideload stock ROM. Sideloading stock 17 times... doesn't it look tedious? From my experience, any developer no matter how clever he is, will have to compile at least 10 or so times before getting the ROM to boot???
Thanks!
Supersonic27543 said:
I have a 'maybe dumb' problem, because we only can flash with FlashFire.
Months ago, I owned a Samsung Galaxy Core Prime. I tried to compile Oreo for it. But, what happened to me is, before I get the ROM to BOOT, I compiled it exactly 17 times, fixing bugs. I never had a problem because I had the TWRP handy, but in this case we will not have a custom recovery at all. If the ROM fails to boot, we'll have to sideload stock ROM. Sideloading stock 17 times... doesn't it look tedious? From my experience, any developer no matter how clever he is, will have to compile at least 10 or so times before getting the ROM to boot???
Thanks!
Click to expand...
Click to collapse
To be honest, FireOS is pretty awesome with root and debloated. I've not had a single problem debloating, and I'm still going lol.
DragonFire1024 said:
To be honest, FireOS is pretty awesome with root and debloated. I've not had a single problem debloating, and I'm still going lol.
Click to expand...
Click to collapse
Hi! I pretty much agree with you. But you never know what it can do until you flash stock Android.
Thanks!
Supersonic27543 said:
Hi! I pretty much agree with you. But you never know what it can do until you flash stock Android.
Thanks!
Click to expand...
Click to collapse
That's one of my projects
DragonFire1024 said:
To be honest, FireOS is pretty awesome with root and debloated. I've not had a single problem debloating, and I'm still going lol.
Click to expand...
Click to collapse
Could be that I don't know how to solve the problems I have, but for me not all the Google play applications I want (for my kid) work. Issues vary from validating my authorized purchase to core functionality of applications not working. Some of the applications refer to Android os content and services that either aren't in fire os, are named differently, or have different functionality.
Not to mention that I dislike my son's user experience... He's only 3, quite smart but I've not been able to strike a good balance of protecting him and allowing him to actually use his tablet without learning wierd tricks to access Google play apps.
I'm ok if I have to stay on Fire Os if I can have complete control over profiles, launchers and have a genuine experience using my Google Play applications. Some of the FreeTime stuff is ok... My son might like some of it. But more importantly I want him to have the far superior applications on Google Play which are not currently available on Fire.
I'm willing to contribute to get a custom rom on the fire 10.
I really want to compile one, my skills are getting blunt without some compiling, but it turns out that I only have a HD 8.
Can someone please educate me on getting the GPS to work with google maps, like my phone? My HD 10 7th gen is rooted w/supersu. I have xposed and flashfire installed.
Is a custom ROM really required for this? I tried GPS tethering over hotpot but even that didn't work properly. I wish Amazon had their own proper NAV app to use the GPS chip, could be a bonus to being a prime member.
kferling said:
Can someone please educate me on getting the GPS to work with google maps, naively like my phone? My HD 10 7th gen is rooted w/supersu. I have Xposed and flashfire installed.
Is a custom ROM really required for this? I tried GPS tethering over hotpot but even that didn't work properly. I wish Amazon had their own proper NAV app to use the GPS chip, could be a bonus to being a prime member.
Click to expand...
Click to collapse
Clear data of 4 Google apps. Uninstall and reboot. Make sure nothing of the apps are left in /data/data. If so, delete folders and reboot. When booted again, toggle off location services for about 30 seconds and turn it back on. Then install the 4 APKs in this exact order: gfs_login, gfs, gms, vending. After install wait about a minute or two and reboot then log in. Wait several minutes, watching the two desktop icons. When they flash, the apps have updated. Go to location services and it might be turned off. If so, turn it on and press accept/yes for ALL OPTIONS. If it's turned on, toggle it off for 30 seconds then turn it on and again accept/yes all boxes that appear.
Sent from my Galaxy S4 using XDA Labs
DragonFire1024 said:
Clear data of 4 Google apps. Uninstall and reboot. Make sure nothing of the apps are left in /data/data. If so, delete folders and reboot. When booted again, toggle off location services for about 30 seconds and turn it back on. Then install the 4 APKs in this exact order: gfs_login, gfs, gms, vending. After install wait about a minute or two and reboot then log in. Wait several minutes, watching the two desktop icons. When they flash, the apps have updated. Go to location services and it might be turned off. If so, turn it on and press accept/yes for ALL OPTIONS. If it's turned on, toggle it off for 30 seconds then turn it on and again accept/yes all boxes that appear.
Click to expand...
Click to collapse
Thanks, although I did not get location prompts at the end. :/
Data was wiped for all 4, and uninstalled. rebooted and verified no data with ES.
Installed google apks in the exact order, waited 2 minutes, rebooted, then logged into playstore.
Went to home screen, saw apps flash after waiting. Went to location services (was off) turned on and no prompts
Turned off, waited 30 secs, turned back on, still no prompts.
Is this any different from your guide here?
Step 6. states "Once all the APKs are installed, open the Play Store and sign into your account and IMMEDIATELY go to settings and TURN OFF auto-updates. "
Perhaps that's what I need to do?
Just ordered an HD10, will this tutorial still work? https://forum.xda-developers.com/hd...7-root-box-t3726443/post75187398#post75187398
Will that debloat Fire OS also?
So I've figured out numerous things that get this closer to a custom rom. I just want to report my progress. As I'm working to get my PC in a good enough shape to run Windows and Linux again, I can't compile from source yet. my biggest issue is space. I need to free a lot up. But that doesn't mean anything.
I have been able to track down a lot of useful old school tools here on XDA. The amount of resources that exist on this site never cease to amaze me. Given what I've been doing to these tablets (the resources are old, 2012 onward), I kept looking in that era for tools to assist in getting us to a rom. In the past week I've been able to do these things, with success but have not tested a rom yet. Amazon has had it a bit more difficult with this device.
- Successfully deodexed the stock ROM 5.6.1.0. This was very easy to do...once I found tool that was compatible with deodexing Lollipop. Apparently it not easy to do.
- Successful library integration and editing of a stock AOSP Gallery3d apk. Fully 100% operational and full picture editing availability. Combine my wallpaper discovery, Amazon Photos is no longer required as a wallpaper or gallery source.
- Successfully addition of other surprises
- Figured out how Amazon restocks the ROM on a reflash. In the update.bin is a .dat file. When compiled, produces the system files in whole fresh stock. This can be edited then recompiled back into a system.img or can be used to build a ROM .zip style. That also means once I can build from source, a real ROM can be built.
- Will be pre-rooted with busy box.
- Viper4Android
- Ad blocking from open source free ware.
- Includes my framework and Settings mods.
Any questions please feel free to ask.
Have a new 2015 HD 10. Will definitely be following your progress
FuNKSioN said:
Have a new 2015 HD 10. Will definitely be following your progress
Click to expand...
Click to collapse
Or a severe lack of progress...
I have been at it for hours and hours and I am no closer than I was when I made my last post. I've looked at dozens of updater-scripts and the mount points are no different than the Fire 7, but it just won't flash a zip and when the rare chance comes along that the zip does flash, booting doesn't get past the white Amazon logo (first power on logo). I finally managed to get nearly all of the script right, and now when I add assert getprop for device ID verification, it rejects it despite the fields being properly filled out. I'm not giving up, I just need to figure out why.
On a side note, I have been able to do a switcheroo on the system, sorta. In trying to further mod the settings apk, I have been able to use a settings apk from an AOSP rom to replace FireTabletSettings. There is a trick...uninstall the stock FireTabletSettings APK, wipe the caches and dalvik, and took a resigned AOSP settings apk (test key signed), installed it as a user app then converted it to a system app. It installs fine, but I can only get half of it to work. I haven't tried with the framework or systemUI yet because I haven't been successful with the settings.
Back to the drawing boards...
Sent from my Galaxy S4 using XDA Labs
DragonFire1024 said:
Or a severe lack of progress...
I have been at it for hours and hours and I am no closer than I was when I made my last post. I've looked at dozens of updater-scripts and the mount points are no different than the Fire 7, but it just won't flash a zip and when the rare chance comes along that the zip does flash, booting doesn't get past the white Amazon logo (first power on logo). I finally managed to get nearly all of the script right, and now when I add assert getprop for device ID verification, it rejects it despite the fields being properly filled out. I'm not giving up, I just need to figure out why.
On a side note, I have been able to do a switcheroo on the system, sorta. In trying to further mod the settings apk, I have been able to use a settings apk from an AOSP rom to replace FireTabletSettings. There is a trick...uninstall the stock FireTabletSettings APK, wipe the caches and dalvik, and took a resigned AOSP settings apk (test key signed), installed it as a user app then converted it to a system app. It installs fine, but I can only get half of it to work. I haven't tried with the framework or systemUI yet because I haven't been successful with the settings.
Back to the drawing boards...
Click to expand...
Click to collapse
Try digging in files. I guarantee that Amazon took a very similar approach as Samsung did, requiring you to flash a break encryption zip.
I would try to help, as I've made several AOSP roms, but that was when Android 4.4 was the newest and you could compile it with 4 gb of ram.
Once I upgrade or get a new PC, I will most definitely install Linux, and try to help this forum.
---------- Post added at 06:31 AM ---------- Previous post was at 06:26 AM ----------
DragonFire1024 said:
Or a severe lack of progress...
I have been at it for hours and hours and I am no closer than I was when I made my last post. I've looked at dozens of updater-scripts and the mount points are no different than the Fire 7, but it just won't flash a zip and when the rare chance comes along that the zip does flash, booting doesn't get past the white Amazon logo (first power on logo). I finally managed to get nearly all of the script right, and now when I add assert getprop for device ID verification, it rejects it despite the fields being properly filled out. I'm not giving up, I just need to figure out why.
On a side note, I have been able to do a switcheroo on the system, sorta. In trying to further mod the settings apk, I have been able to use a settings apk from an AOSP rom to replace FireTabletSettings. There is a trick...uninstall the stock FireTabletSettings APK, wipe the caches and dalvik, and took a resigned AOSP settings apk (test key signed), installed it as a user app then converted it to a system app. It installs fine, but I can only get half of it to work. I haven't tried with the framework or systemUI yet because I haven't been successful with the settings.
Back to the drawing boards...
Click to expand...
Click to collapse
Haven't been up-to-date.
Do we have TWRP? If not how are you flashing the files?
I'd be open to porting TWRP to the HD 10 and maybe the 8 if we needed.
Reason being TWRP backups can be converted to a flashable .zip file, meaning that once you've gotten all the AOSP apps working (settings, gallery, etc) you could theme it, debloat it, deodex it, and everything else then save it and convert it to a zip. Would save people the time of doing it, and would be one step forward.
TechNash said:
Try digging in files. I guarantee that Amazon took a very similar approach as Samsung did, requiring you to flash a break encryption zip.
I would try to help, as I've made several AOSP roms, but that was when Android 4.4 was the newest and you could compile it with 4 gb of ram.
Once I upgrade or get a new PC, I will most definitely install Linux, and try to help this forum.
---------- Post added at 06:31 AM ---------- Previous post was at 06:26 AM ----------
Haven't been up-to-date.
Do we have TWRP? If not how are you flashing the files?
I'd be open to porting TWRP to the HD 10 and maybe the 8 if we needed.
Reason being TWRP backups can be converted to a flashable .zip file, meaning that once you've gotten all the AOSP apps working (settings, gallery, etc) you could theme it, debloat it, deodex it, and everything else then save it and convert it to a zip. Would save people the time of doing it, and would be one step forward.
Click to expand...
Click to collapse
Not sure about the encryption. It has to be a script problem, or the system partition won't accept zips and that's the barrier. However if I just flash the system directory instead, everything works fine. I can flash stuff into it just fine that way, but seems any time I go the way of the partition, I can't win. Flashing your own system image works too. However I haven't been able to get one to flash if I modify it. So I can decompile a system.img add to it, remove items and recompile it and it won't flash.
I am using flash fire to flash zips. We still have a locked bootloader so twrp isn't a likely option.
Sent from my Galaxy S4 using XDA Labs
DragonFire1024 said:
So I've figured out numerous things that get this closer to a custom rom. I just want to report my progress. As I'm working to get my PC in a good enough shape to run Windows and Linux again, I can't compile from source yet. my biggest issue is space. I need to free a lot up. But that doesn't mean anything.
I have been able to track down a lot of useful old school tools here on XDA. The amount of resources that exist on this site never cease to amaze me. Given what I've been doing to these tablets (the resources are old, 2012 onward), I kept looking in that era for tools to assist in getting us to a rom. In the past week I've been able to do these things, with success but have not tested a rom yet. Amazon has had it a bit more difficult with this device.
- Successfully deodexed the stock ROM 5.6.1.0. This was very easy to do...once I found tool that was compatible with deodexing Lollipop. Apparently it not easy to do.
- Successful library integration and editing of a stock AOSP Gallery3d apk. Fully 100% operational and full picture editing availability. Combine my wallpaper discovery, Amazon Photos is no longer required as a wallpaper or gallery source.
- Successfully addition of other surprises
- Figured out how Amazon restocks the ROM on a reflash. In the update.bin is a .dat file. When compiled, produces the system files in whole fresh stock. This can be edited then recompiled back into a system.img or can be used to build a ROM .zip style. That also means once I can build from source, a real ROM can be built.
- Will be pre-rooted with busy box.
- Viper4Android
- Ad blocking from open source free ware.
- Includes my framework and Settings mods.
Any questions please feel free to ask.
Click to expand...
Click to collapse
I mean, if PC performance is an issue I can give you access to a brand new xeon if it means there will be a custom ROM out.
Been thinking about buying the Fire HD 10 this black Friday and flash the Amazon garbage out, and was amazed to see none exist even though it has been a year since they figured out the rooting.
This will be an outstanding value if it was possible...

Categories

Resources