Hi everyone
I first dismissed this error as another manifestation of the N1's touch screen drawbacks; but since I owned the Nexus S, the same error reappears, and it’s driving me nuts:
All signs point to the fault being caused by the Gingerbread keyboard. This is how you reproduce it:
1) Use more than one keyboard layout / input language
2) Type anything, switch to the first symbols keyboard
3) Hit any key from the symbols keyboard, and afterwards, directly the space bar
4) The keyboard switches back to letter mode, all good up to now
5) Hit the symbols button again
6) The input language automagically changes to the adjacent one, the keyboard switches back to ABC mode
Suffice to say, this is quite an annoyance. There’s a workaround, though: this doesn’t happen if you hit the ABC key before hitting space, but that’s not how I expect my keyboard to work.
Is anyone else able to reproduce this issue, and if yes, does anyone know how to fix this? Unfortunately, extensive research throughout last week didn’t bring back any usable results.
Thanks for your help!
thenoo said:
Is anyone else able to reproduce this issue, and if yes, does anyone know how to fix this? Unfortunately, extensive research throughout last week didn’t bring back any usable results.
Thanks for your help!
Click to expand...
Click to collapse
Hey!
this happens also on my Nexus S...really disappointing (
I played around in the Keyboard settings but couldn't find a way to fix this (unless you remove multiple languages....but that's not the point :S).
Related
Found this cause I was having same problem...passing it along
To fix the Word Completion function on my Sprint HTC Touch Pro. It turns out the problem has to do with the installation of the new Full QWERTY keyboard that came with the ROM upgrade. My Word Completion was not working in Block Recognizer, the original Keyboard or the Letter Recognizer UNTIL I did this simple fix.. Here is how to do it:
* After confirming that you have the box checked for "Suggest words when entering text" in the Word Completion tab found in Settings>Input.
* Open up a new email or text message.
* Go to the bottom of the screen and change your letter input method to Full QWERTY (using the down arrow next to the "pencil", "keyboard" , etc. icon).
* In the bottom left hand corner of this Full QWERTY keyboard, just to the right of CAPS/shift button, is a button to toggle between T9 and ABC.
* Click the button and make sure that T9 appears below ABC. Apparently the opposite appears as a default setting.
* Switch back to Block Recognizer, Keyboard or Letter Recognizer and Word Completion should be active for you!
when using the keyboard this is not working . . .
Doesn't work for me either
I can't even get T9 to work with the full QWERTY keyboard...
If you install this: http://forum.xda-developers.com/showpost.php?p=2914474&postcount=8
Then you can get the old fashion word completion back on your Touch pro BUT it only works for the regular keyboards (not the new Touch Pro or Compact QWERTY Keyboard) Happy tappy would work with this. You need yo soft reset after installing this.
It will put you back on the old format with the old dictionary and auto complete and auto correct...but no more pretty keyboard...
What about auto complete with the harware keyboard
Still doesn't work with the hardware keyboard, any ideas?
Found the fix here: http://forum.xda-developers.com/showthread.php?t=425405
Word Completion
Same problem here, not getting word completion when typing, even though I have it turned on. I would like a fix for this.
Does anyone have word completion working?
James
word completion
was anyone able to find a fix? i have the fuze and my word completion is turned on but not working.
It does work for the physical keyboard but you still need the onscreen keyboard set to either Happy Tapping or the standard windows keyboard. it cannot be set to Full QWERTY. Also, a soft reset is required since the dictionaries go into the ROM on resets...
Whats goin on
Whats going on man!!!
Does anyone know if there is a fix for this stupid problem
I have word completion working on inputs all except the full qwerty and compact.
It works when you backspace after a few letters???
Please help someone
I seem to have an opposite problem with word completion. When I type in an email or sms, the word suggestion forces me to use its word. The change gets made automatically. Usually the word replaced is not what I wanted. I have tried unchecking the word suggestion/correction and made similar choices in Advanced Config. How can I stop this forced word replacement? Is there a registry hack that would stop this for good?
it is not working , any solutions
touchhdfreak said:
Whats going on man!!!
Does anyone know if there is a fix for this stupid problem
I have word completion working on inputs all except the full qwerty and compact.
It works when you backspace after a few letters???
Please help someone
Click to expand...
Click to collapse
Same problem with me.
Hey fellow XDA-ers.
I hope that in this thread we can unite in finding a solution for the annoying t9 input mehod, without breaking the hardware keyboard.
What's the problem:
I want to get rid of the annoying black t9 input and autocomplete bar, and use the standard WM6.1 version.
What anoys me the most is when you type an address for sending text, you start by typing first name of for instance friends who share a first name, but have different last names, , as soon as you hit space for the lastname, the person with the first name that's on top of the list gets selected..ARG
I also hate the lag it introduces.
So getting rid of the black ezinput part of the keyboard.
This can be done by replacing the eT9 values in your registry at the layout to COMP (et9IME replace by compIME and so on) and this works for soft keyboard.
However, this "fix" breaks some stuff in your hardware keyboard (the SYM key for instance stops working, also you cannot get the euro sign or the pund sign by pressing fn E or fn W)
I of course want the best of both worlds, and especially miss the sym button for getting a "\" whilst typing in shortcuts
So, I have tried so much, but haven't found a solution yet.
Does anybody know how to get this "best of both worlds" option?
Does opening up the on-screen keyboard and hitting the T9 --> ABC switch help?
nope
It doesn't use autocomplete then when typing text, but you still get the black bar at the bottom whilst entering an address, and the space-issue (filling in word after space) is introduced.
I just want the behaviour as when eT9 replaced by comp (ei. you get a couple of suggestion in your screen in light grey boxes, in stead of on bottom bar in black) but with FULL use of my hardware keyboard.
I want to do this without installing all kinds of secondary software that slows my device down, but want to solve it at the root.
Hope I am explaining the problem clearly
But thanks for the reply..
Maybe we can figure it out..
known problem
I've done the t9 compIME registry change and to me, is a must. That black bar was SO annoying and decreased effectiveness.
I have noticed the hardware keyboard does get screwy after doing this.
Using Da_G's roms, he has solved most of the problems in some of his earlier roms. I think the only problem I have currently is a non-working "cent" sign (FN+_). I'll test this again after I flash to his latest Rom.
I think he solves this by implementing SOME of the t9 files. I'll follow up with more accurate results.
player911 said:
I've done the t9 compIME registry change and to me, is a must. That black bar was SO annoying and decreased effectiveness.
I have noticed the hardware keyboard does get screwy after doing this.
Using Da_G's roms, he has solved most of the problems in some of his earlier roms. I think the only problem I have currently is a non-working "cent" sign (FN+_). I'll test this again after I flash to his latest Rom.
I think he solves this by implementing SOME of the t9 files. I'll follow up with more accurate results.
Click to expand...
Click to collapse
If that's the case, making a cab, or posting the necesary files to replace would be ideal.
Does your SYM key work?
sounds like a very good start
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
akky66 said:
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
Click to expand...
Click to collapse
Tnx for your input Steve.
I allready have that set up, but as you will find, it does not get rid of the black bar during txt msgs to field input, if you know what I mean.
It also gives lag on the hardware keyboard input comapred to the comp ide input method, which I find anoying.
What I really want is just the old wm input and auto complete feature without breaking my keyboard.
but as said before, thanks for the input.
This way we can narrow it down and hopefully make the problem easier to understand.
Ta...
tried editing sym files
Tried editing and replacing the txt files in windows directory,
eT9.Raphael.0409.kmap.txt and eT9DeadKeys.txt and renamint the et9 to comp, no luck.
Anybody any suggestions?
akky66 said:
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
Click to expand...
Click to collapse
I did that and the black bar is gone! No more annoying auto-capitalizing and duplicated words! Thanks a lot!
Not quite
Smaniac said:
I did that and the black bar is gone! No more annoying auto-capitalizing and duplicated words! Thanks a lot!
Click to expand...
Click to collapse
It get's rid of the black bar whilst typing a text, however whilst typing an adress in the to field, you will notice that you still get a black bar and proposed name in the bottom of your screen.
This is actually eT9 still running, and slowing down your input, trust me on this
The "old" way, you'd get the proposed names next to your to field, in a light grey box, and you could scroll through them and use the space bar without getting it to autocomplete.
I normally type the first few letters of the persons name, and then use the left and right arrow keys to gp through the matching contacts. That does the trick for me
indeed
GaZ said:
I normally type the first few letters of the persons name, and then use the left and right arrow keys to gp through the matching contacts. That does the trick for me
Click to expand...
Click to collapse
It does the trick and it is how I use it now.
It's just not the solution I am looking for.
I'm a bit wierd in that way, if I see it poping up, I know it's there and it just annoys me...
Don't you just love the way things were before
But thanks for the tip.
No luck here yet
I haven't had any luck yet, anybody else?
This issue is really starting to bug me
Any luck yet with removing the T9 Black bar? I am having this problem as well.
Me too!
i want the old way with the little grey box, it was so much better. It gave a number of people when you typed in a user name for sms and it also gave better autocomplete options.
Solve for all us
Try attached CAB guys from our famous Russian PDA professional. It's remove this bar completely.
yes it worked for me on Touch HD perfectly
Works
Igoran said:
Try attached CAB guys from our famous Russian PDA professional. It's remove this bar completely.
Click to expand...
Click to collapse
TY it completely rocks on Touch HD.
Does this just disable T9 on the hardware keyboard? AND, when entering a contact into sms or email you get the grey list like before?
What about T9 for soft keypad/boards? How does it function now?
I stumbled upon your thread while searching for "disable t9 hardware keyboard".
I have the same problem on my Kaiser... Installed ezinput keypad/board and now have that 'damn' black bar. I'm getting used to it like 'GaZ' but dont really like it...
<<<UPDATE: Only selected abc over t9. Black bar still there.>>>>
use different sip
im not sure if this help but wasnt this issue introduced with the diamond sip set? maybe using different sips might get rid of it. or maybe replacing the new eT9 and using the old wm6 t9 instead in wm6.1 roms. just a thought
Hi,
I am just new to this pocket PC phone (just the old HTC Touch) and i tried out installing an IP Phone Keyboard program. When I wasnt happy about it, i uninstalled it but it messed up my SIP. The default standard input keyboard now is cut at the bottom (meaning i dont see the entire last row of Ctrl, space bar, etc.) but there's a black row appearing at the top of the input keyboard. It looks like the input keyboard was dragged down. Worse, the suggested words now appear at the bottom of the screen (where your normal Send or Cancel buttons are).
I really would appreciate your advise and help in getting this resolved. Dont know where to run to or whom to raise this to.
Thank you and looking forward to your response.
ailene said:
Hi,
I am just new to this pocket PC phone (just the old HTC Touch) and i tried out installing an IP Phone Keyboard program. When I wasnt happy about it, i uninstalled it but it messed up my SIP. The default standard input keyboard now is cut at the bottom (meaning i dont see the entire last row of Ctrl, space bar, etc.) but there's a black row appearing at the top of the input keyboard. It looks like the input keyboard was dragged down. Worse, the suggested words now appear at the bottom of the screen (where your normal Send or Cancel buttons are).
I really would appreciate your advise and help in getting this resolved. Dont know where to run to or whom to raise this to.
Thank you and looking forward to your response.
Click to expand...
Click to collapse
Restart your PPC. After that go to settings--> input---> select default input keyboard and try.
Hope it will help.
Are you using the default keyboard?
You can install any other SIP and it should work fine even if the default keyboard's having problems.
You can also hard reset incase you don't manage anything else.
I'm not aware of a bug concerning the default keyboard showing wrong except for something which goes away after a soft reset.
Thanks very much for your responses. Unfortunately, I did all that (set keyboard as default, try installing another keyboard software, soft reset and hard reset) but the problem still persists. I am almost in the vicinity of regretting why i had this PPC.
can you specify exactly which app caused this problem?
Hi,
When I type fast on the Samsung Epix (i907) keyboard, then often letters are missing, even though I did get the feedback from the keyboard that the keys were pressed. For example, when I try to enter "this is a test with the new keyboard" it just came out as "this is ates wit the newkeyboard".
I am typing at the same speed on other mobile devices (e.g. Blackberry) and it works fine there.
Here is what I have tried so far:
1) Turned off Word Completion and Auto Correct under "Settings/Input/Word Completion". Some posts suggested that solves the issue on some other Windows Mobile devices, but it did not do anything on the Epix.
2) Changed sensitivity on the Up/Down Control under "Settings/Buttons". Same result: no change.
3) Performed a hard reset and tried it again with only the blank OS (plus all the goodies AT+T added...). Still same result.
Does anybody have any other suggestions?
Thanks much!
Ralph
plaes ask question in the correct thread this helps us to answer you better and get your question noticed
Thanks for the quick reply. Which forum is the most appropriate for this question? I was not able to find a forum specifically for the Epix.
Thanks.
Ralp
rbuelling said:
Hi,
When I type fast on the Samsung Epix (i907) keyboard, then often letters are missing, even though I did get the feedback from the keyboard that the keys were pressed. For example, when I try to enter "this is a test with the new keyboard" it just came out as "this is ates wit the newkeyboard".
I am typing at the same speed on other mobile devices (e.g. Blackberry) and it works fine there.
Here is what I have tried so far:
1) Turned off Word Completion and Auto Correct under "Settings/Input/Word Completion". Some posts suggested that solves the issue on some other Windows Mobile devices, but it did not do anything on the Epix.
2) Changed sensitivity on the Up/Down Control under "Settings/Buttons". Same result: no change.
3) Performed a hard reset and tried it again with only the blank OS (plus all the goodies AT+T added...). Still same result.
Does anybody have any other suggestions?
Thanks much!
Ralph
Click to expand...
Click to collapse
Is it random letters or is it always the same letters that you missing? According the example text that you have given it seams you have missed twice the space key.
However I have such issue with my HTC Universal. In my case I found out it is the keyboard membrane that doesnt function as it suppose to be and it is mostly the same letters that failing.
See now I had the Mogul and this happened almost no stop. I figured it to be an issue with lag?
First, just want to say thanks for the development on the Note Pro. CM on this thing is awesome. That said, I still have a couple of lingering issues, hoping someone may have found some work arounds/solutions. Inevitably there will be someone that will reply with "USE THE SEARCH!". For those that do, I will offer you my sincere admiration. Your search foo is only exceeded by your wit. For those that are still willing to read on and assist, know that I've come up empty in my search attempts. Believe me, I'd rather have found a simple search result than to have typed all this up... In any case:
1. Hardware keys and navbar -
CM has a setting for "Enable on-screen navigation bar and disable hardware buttons". Checking this box enables the navbar, but fails to actually disable the capacitive and physical buttons. This causes me some grief when using the tablet in portrait mode. I've tried hacking around in the build.prop and the Generic.kl files, but haven't found that magical combination of new lines/commented out lines. Maybe CM does this differently than other roms? (I've not observed a difference in these files when toggling back and forth in the settings, so there must be something else I'm missing.) Any pointers?
2. Key Mapping -
I have the Logitech Pro Keyboard Case. Seems to work well, for the most part. (I'm typing on it now...) However, not all of the keys work. Example - there are keys on the top left row for "back", "menu" and "task switching". Nothing appears to happen when pressing these now. Again, probably something in a .kl file somewhere, but I'm coming up empty. There doesn't appear to be a Vendor-Specific.kl file, but Generic.kl doesn't seem to cut it either.
3. On-Screen keyboard still displays when using bluetooth keyboard.
Well, that about says it all really. I've tried using both the Google keybard, and SwiftKey. Both continue to show up on-screen, even though I'm typing on the bluetooth keyboard. Swiftkey even tells me that it cannot detect a physcial keyboard. Probably related to the key mapping issue from above, but...
Again, thanks for all the work on this. Having CM saved my tablet from it's date with eBay.
Thanks!
- Bri
1. i thought about it but now i haven't spare time to implement. next week maybe.. but i dont promise
2. and 3. try this programm https://play.google.com/store/apps/details?id=com.apedroid.hwkeyboardhelper
171
Thanks! I'll give the app a shot. I'm concerned that it seems to replace any other keyboard though. I'd like to find a way to keep SwiftKey's corrections/prediction functionality. Nevertheless, I'll give it a go.
- Bri
bribash said:
Thanks! I'll give the app a shot. I'm concerned that it seems to replace any other keyboard though. I'd like to find a way to keep SwiftKey's corrections/prediction functionality. Nevertheless, I'll give it a go.
- Bri
Click to expand...
Click to collapse
Hey, try going with Null Keyboard, enable all your keyboards, and switch between them depending on whether the device is connected or not