Hello ! This is a kernel from JPB with little tweaks:
-ADB always enabled on boot, with root access
-Some performances tweaks from here
http://www.megaupload.com/?d=6P4CMF7I
Try it and give feedbacks .
Hey mate, you're so fast with developing cool new stuff for our G3 that i nearly can't make a decission what to flash... ^^
Thx a lot for this tweaked kernel... will it push pefermormance heavily?
About the decission problem: What do you think about that kombination: your ultra clean JPF with this kernel?
s3th.g3ck9 said:
Hey mate, you're so fast with developing cool new stuff for our G3 that i nearly can't make a decission what to flash... ^^
Thx a lot for this tweaked kernel... will it push pefermormance heavily?
About the decission problem: What do you think about that kombination: your ultra clean JPF with this kernel?
Click to expand...
Click to collapse
Well, i think Clean JPA/JPF + Lagfix V2 (since we have no ext4 support yet .. I'm gonna play a bit with 2.1 roms for that and try if it's better ) + this would work great .
testing ultra clean jpf + jpb modified kernel + lagfix v2 right now
sorry for the noobish question but how do i put this on my phone?
flash it with odin? if so as what? if so do i need to do a factory reset? will it reset it?
or do i just copy it to somewhere in root?
I have a rooted jpf with lagfix 2.
all you need is:
1. cache.rfs - from ultra clean JPF
2. factoryfs.rfs - from ultra clean JPF
3. modem.bin - from ultra clean JPF
4. zImage - modified JPB kernel from this threat
5. logo.png - i don't really know if this one is essential
then make a .tar archive with total commander or whatever and flash it odin. factory reset will be needed!
p.s. maybe you can make an archive ONLY with zImage. maybe then you won't have to wipe settings.
it seems that zimage is part of the phone part of a firmware, the regular jpf contains cache.rfs datafs.rfs factoryfs.rfs and zimage. So i should just make one with zimage and flash it to phone? is that possible? or should i add the others (I have limited bandwidth so i probably wont download clean jpf and just clean it for myself after flashing, which i did after installing jpf). or, do i just have to get rid of data.rfs to be able to flash it without reseting everything?
stubborn_d0nkey said:
sorry for the noobish question but how do i put this on my phone?
flash it with odin? if so as what? if so do i need to do a factory reset? will it reset it?
or do i just copy it to somewhere in root?
I have a rooted jpf with lagfix 2.
Click to expand...
Click to collapse
Just flash it with Odin and enjoy
Gsam101 said:
Hello ! This is a kernel from JPB with little tweaks:
-ADB always enabled on boot, with root access
-Some performances tweaks from here
http://www.megaupload.com/?d=6P4CMF7I
Try it and give feedbacks .
Click to expand...
Click to collapse
Brother sorry but can u please specfiy the tweaks you done in this kernal. I see that link which you specify but I not able to understand that what you do in this kernal.
madhuranand007 said:
Brother sorry but can u please specfiy the tweaks you done in this kernal. I see that link which you specify but I not able to understand that what you do in this kernal.
Click to expand...
Click to collapse
1. write-after-every-read disabled
2. tweak for flash disk (not spinning disk)
3. tweak to reduce lags when a huge write is required
4. task scheduler values optimized for android (not linux)
5. increased write flush timeouts to save battery life
6. ADB always enabled on boot, with root access
using ultra clean JPF + Gsam101 modified JPB Kernel + lagfix v2
(thank you Gsam101!)
1. is it possible that after applying lagfix v2 the phone became slower?
2. found a little bug. when i try to delete a contact, the contact app crashes
3. wifi sometimes doesn't work even if it is showing signal (i fix it by turning wifi off and on)
4. proximity sensor not working again when i wan't to end a call i have to wait until someone else hangs up because no buttons work and i see only a black screen
responsiveness and speed is supercool! except for these few bugs mentioned above.
thanks again Gsam101!
EdisDee said:
1. write-after-every-read disabled
2. tweak for flash disk (not spinning disk)
3. tweak to reduce lags when a huge write is required
4. task scheduler values optimized for android (not linux)
5. increased write flush timeouts to save battery life
6. ADB always enabled on boot, with root access
Click to expand...
Click to collapse
Thanks brother.......Now I understand.
EdisDee said:
testing ultra clean jpf + jpb modified kernel + lagfix v2 right now
Click to expand...
Click to collapse
Is it possible to upload the tar file you made?
EdisDee said:
4. proximity sensor not working again when i wan't to end a call i have to wait until someone else hangs up because no buttons work and i see only a black screen
Click to expand...
Click to collapse
Really? Should be fixed within the JPB kernel. But i haven't tested it myself yet. If you're right it would be horrible. That's the most annoying bug i've seen on the G3 (although home-button should work to turn the screen on)!
Hi Gsam, can you provide another link for this JPB kernel ? Megaupload really annoying as they always said that another user is downloading file.
nice... can you disclose how you managed to repack the thing and still have it boot? (I think I saw a few threads around, it would be good to know which kernel source tree + toolkit + cflags work for this phone)
I'm using a (modified) z4mod, and I've been trying for a few days to make the thing boot (the lack of console messages doesn't help :-/)
s3th.g3ck9 said:
Really? Should be fixed within the JPB kernel. But i haven't tested it myself yet. If you're right it would be horrible. That's the most annoying bug i've seen on the G3 (although home-button should work to turn the screen on)!
Click to expand...
Click to collapse
A/ sooo are you releasing ROM without testing ?
B/you can set up in settings that the power button will switch off the call - I use it, it's ok, you don't have to wait for a screen
C/ what about click sound during a call which was a JPB issue ?
to make your self a clean JPF + JPB modified kernel firmware
EdisDee said:
all you need is:
1. cache.rfs - from ultra clean JPF
2. factoryfs.rfs - from ultra clean JPF
3. modem.bin - from ultra clean JPF
4. zImage - modified JPB kernel from this threat
5. logo.png - i don't really know if this one is essential
then make a .tar archive with total commander (just select all these files and press the "archive" button. select tar as your archive format and do not change any other settings) or whatever and flash it odin. factory reset will be needed!
p.s. you can make an archive ONLY with zImage. then you won't have to wipe settings.
Click to expand...
Click to collapse
if your phone gets stuck @ samsung logo after flasing then go to recovery menu and do a factory reset. i even recommend doing a factory reset before flashing.
p.s. don't forget to backup your contacts and stuff!
how to flash files one by one?
(not making .tar! i don't really trust the softwares much )
nastyba said:
A/ sooo are you releasing ROM without testing ?
Click to expand...
Click to collapse
What? I haven't released this rom!
The roms comes from Gsam... look at post 1 *lol*
Related
OK, here's my first real contribution to the Android community... and I owe all credit to the amazing cooks out here...
I take no credit for anything, other than the fact that I kanged Paul's, Pershoot's, Cyangen's, intersectRaven's, Ivan Dimkovic's and Termana's work...
PLEASE READ THIS WHOLE POST BEFORE DOWNLOADING AND FLASHING. I SUGGEST U READ THE POSTS OF THE ORIGINAL KERNEL AUTHORS AS WELL.
This is a mod of the Desire Camera R2 port by Paul.
I just pushed the changes to various kernel mods including the stock CM506 kernel.
This should work on any stock version of CyanogenMod... tested on CM 5.0.5.x & CM 5.0.6... These mods should work with other ROMs as well, but I have not tested any. Try at your own risk.
Instructions:
1. Pop the zip file onto your SD card.
2. Reboot into Amon RAs recovery.
3. Do a nandroid backup [VERY IMPORTANT IN CASE YOU FACE SOME PROBLEMS!].
4. Select "Flash zip from SD" and select this zip.
5. Reboot.
Note:
This will flash a modified Pershoot's OC/UV kernel boot.img and replace the camera app. Flashing the boot.img is necessary since this mod requires a change in init.rc. Flashing another boot.img will cause the Desire camera to FC. If you want to flash another kernel, flash the zImage and push the wlan ko. Please use at your own risk (but, no this will not brick your phone).
Known Issues:
You might encounter FCs if you use NexTheme Goodies add-on.
Update (4/26):
Using Pershoot's UC/OV & UC/OV Xtra kernel mods
Using intersect Raven's AVS kernel mods
Using Ivan Dimkovic's AVS & AVS OC kernel mods
Using Termana's .34rc3 kernel mod
Update (4/27):
Using Pershoot's UC/OV & UC/OV Xtra 33.3 kernel mods - 4/26
Using intersect Raven's AVS 33.3 kernel mods - 4/27
Using Ivan Dimkovic's 800mv AVS 33.2 kernel mods - 4/26
Update (4/29):
Using intersect Raven's 800mv AVS 33.3 kernel mods - 4/29
Using Termana's OC/UV 34rc5 kernel mod - 4/28
Update (5/2):
DIY kit and How-To document added (Desire-Camera-R2-DIY).
Update (5/3):
Using intersect Raven's 800mv & 925mv BFS & CFS AVS 33.3 kernel mods - 5/3
Using Ivan Dimkovic's 800mv & 925mv OC & Non-OC AVS 33.3 kernel mods - 5/2
Using Pershoot's UC/OV & UC/OV Xtra Old Wifi & New-WiFi 33.3 kernel mods - 4/30
Using Termana's OC/UV 34rc6 kernel mod - 5/2
Download Folder
MD5 Checksums:
d6358ed5fc703ba90887c83637a814dc Desire-Camera-R2-CM506-signed.zip
c4ab1b086aa8109d0ffba0dbb8bb7862 Desire-Camera-R2-intersectRaven-800mv-BFS-05.03-signed.zip
667d4d9706790be904ad730d2b3a1c64 Desire-Camera-R2-intersectRaven-800mv-CFS-05.03-signed.zip
834c4e9981c253a1db66b40c9d6ae2e8 Desire-Camera-R2-intersectRaven-925mv-BFS-05.03-signed.zip
89d44934cac30476dcda704c9d6d18fa Desire-Camera-R2-intersectRaven-925mv-CFS-05.03-signed.zip
83bf81f254bf2ad54ec4b2dc795816ac Desire-Camera-R2-Ivan-800mv-Diet-hybridAVS-05.02-signed.zip
a9a7c4de52d79627ceb3a56bce40021d Desire-Camera-R2-Ivan-800mv-Diet-hybridAVS-OC-05.02-signed.zip
f1493e367513c577dc1f5360aed3f347 Desire-Camera-R2-Ivan-925mv-Diet-hybridAVS-05.02-signed.zip
5681838cfcaab3c2bfe6c2c8da061972 Desire-Camera-R2-Ivan-925mv-Diet-hybridAVS-OC-05.02-signed.zip
5e82cbeb57ba21f99bdb3d0de4053d3f Desire-Camera-R2-Pershoot-OC_UV-04.30-signed.zip
09109216cd0f7e9b636b0a0077a7b613 Desire-Camera-R2-Pershoot-OC_UV-NewWiFi-04.30-signed.zip
91e035eb60e06069623331cb98f388c5 Desire-Camera-R2-Pershoot-OC_UV_Xtra-04.30-signed.zip
78a04c5ae08f5d31ad13c6552e90933e Desire-Camera-R2-Pershoot-OC_UV_Xtra-NewWiFi-04.30-signed.zip
848a556b8cde374a47b2c73ca62f1ea1 Desire-Camera-R2-Termana34rc6-OC_UV-signed.zip
If you encounter any problems like FCs, please post a logcat.
Have fun!!!
Um... maybe also include the steps to install it?
Foxy Roxy said:
Um... maybe also include the steps to install it?
Click to expand...
Click to collapse
Download it and flash it via Recovery console..
Huey85 said:
Download it and flash it via Recovery console..
Click to expand...
Click to collapse
Don't forget the nandroid BU. =) Flashing this now. Thanks!
Huey85 said:
Download it and flash it via Recovery console..
Click to expand...
Click to collapse
Lol I know how to do it, but I'm just asking him to make it noobie friendly.
I consistently get "Your SDCard is Full" message when trying to take the pic.
GNja said:
I consistently get "Your SDCard is Full" message when trying to take the pic.
Click to expand...
Click to collapse
That strange. It works fine for me when I take pictures. Hopefully someone can help you with that issue. :S
Btw, thanks Craig I'm so glad that I can use the desire cam again ^^ I miss it so much ~~~
Reflashed the Kernal update and it works now...I had been using CameraZoom, but think I'm going to uninstall it now as I never really used the plugins.
Thanks!
It works Thank You
Um nevermind... I take back what I said about the fact that it's working properly... it actually isn't.
The camera occasionally closes on me. Sometimes it also restarted my phone when I try to open it too.
Why there is a need to install it together with boot image ? Isn't it just a regular system application with additional libraries ?
If this is a case, is it possible to remove the boot image from the package - this way it can be used by anyone who want to run a different kernel and it won't be any need to reflash the kernel after installing this?
Foxy Roxy said:
Um nevermind... I take back what I said about the fact that it's working properly... it actually isn't.
The camera occasionally closes on me. Sometimes it also restarted my phone when I try to open it too.
Click to expand...
Click to collapse
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats... for me it help.
dimon1983 said:
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats... for me it help.
Click to expand...
Click to collapse
Ok I'll try that right now and see if it helps.
... Nope, does not help for me.
Oh well. Reverting back to my backup ~
Foxy Roxy said:
... Nope, does not help for me.
Oh well. Reverting back to my backup ~
Click to expand...
Click to collapse
strangely...
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats and then flash this Camera\Kernel mod
Or try separately flash Kernel and then flash Camera\Kernel mod... I was the flashing of a kernel before flash this mod and no doing Wipe
Sorry for my English
dimon1983 said:
strangely...
Try Wipe Cache and Wipe Dalvik-Cache and Reset Battery stats and then flash this Camera\Kernel mod
Click to expand...
Click to collapse
That's what I did ^^;
You should probably mention that by using this, one also overwrites the current kernel.. No good if you use another kernel that the one supplied with this .zip.
Nice work!
Is there a way to change the default names of the pic?
"date_time.jpg" would be nice so they are ordered correctly in gallery..
Pochemuchka1977 said:
Why there is a need to install it together with boot image ? Isn't it just a regular system application with additional libraries ?
If this is a case, is it possible to remove the boot image from the package - this way it can be used by anyone who want to run a different kernel and it won't be any need to reflash the kernel after installing this?
Click to expand...
Click to collapse
Actually, this has changes in init.rc (to initialise the htc framework) which can only be changed by flashing the boot image. So no, there's no way to get it working without flashing the boot
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK.
NOTE: THIS IS ALL UNTESTED. THE MINUTE I FINISH, I UPLOAD. SO DON'T BE SURPRISED IF IT DOESN'T WORK.
This ROM is based on @cas_xp's, @dsixda's, @kalt_kaffe's, and @tkirton's work. A big "Thank You" goes to them.
Also a big Thank you goes to www.heylisten.org/ROM, the provider of the free hosting and the one(s) that made OTA possible. I will also be making a QR code to download it straight to your phone.
Info:
Android OS version: 2.2
ROM Name:tahahawa's U81XX Froyo Mod
Rooted (unsecured boot.img):YES
Rooted (Superuser.apk + su):YES
BusyBox installed:YES
BusyBox run-parts support:YES
DT's Apps2SD support (2.7.5.3beta04):YES
/data/app enabled:YES
Custom boot animation allowed:YES (Place in /data/local [will need to be re-signed])
Nano text editor installed:YES
Bash shell support:YES
/system/framework is deodexed :YES
/system/app is deodexed:YES (except for the htc ime)
ROM will wipe all data:NO
Zipaligned
Includes Wireless tether app (extra; not needed)
task killer tweak for speed
Maybe a couple of things I forgot
Download here and the update 1.3.8-1.4 here
First U8100/U8120/U8110 ROM that has OTA updates!!! WOOT!!!
Black task bar theme: http://www.gamefront.com/files/20139338/smalser.wt.zip
For those on Pulse Minis/U8110s and can't get network try the method here or follow my steps http://forum.xda-developers.com/showpost.php?p=12585608&postcount=255
For those on V845s/U8120s try @anryl's kernels over here
Quick tips for Pulse minis etc.: http://forum.xda-developers.com/showpost.php?p=12780180&postcount=301
To-do list:
1)Include Wifi fix
2)OC kernel
3)Darktremor's a2sd
4)Radio app
5)Calibration app
6)flash player inclusion? NOT POSSIBLE. REQUIRES ARMv7
7)Update System apps
8)fix D-pad light
9)De-odex
Change Log:
V1.3.8:-replaced launcher2 with launcherPro
-Edited task killer tweaked
-New boot animation
-Possibly better/updated OpenGL es driver?
-Edify scripting
V1.3.5:-Implemented OTA!!!
-New host for files
-Incremental updates will be started as well
V1.3.2:-Removed Titanium Backup and ROM Manager.
-Still waiting for OTA to be possible
V1.3:-Added Titanium Backup and ROM Manager.
-Updated ROM base to @cas_xp's wifi update beta3.
-Closer to implementing OTA.
V1.2.5 (name not changed in ROM):-A2SD patch created
-Experimental boot.img by @anryl released
V1.2:-Two versions, with or without A2SD
-The A2SD includes A2SD version 2.7.5.3 beta03
-Fixed update-script... again
-removed A2SD version, added support
V1.1:-Fixed update-script
-Changed name to "tahahawa's U81XX Froyo Mod V1.1"
V1:-initial release
Any ascend or m860 support?
S.I. 77
selfinflicted1 said:
Any ascend or m860 support?
S.I. 77
Click to expand...
Click to collapse
Unfortunately, no.
Installation
1. Flash a recovery image
2. Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting. You should wipe unless you are already on a Froyo ROM.
Swap:
To enable swap on partition 3 or partition 2 (it will check partition 3 first and if it doesn't exist it will try partition 2)
$ su
# sdswap.sh enable
$ su
# sdswap.sh disable
Compcache:
If you are using are already using a swap partition on your SD-card, then you most likely shouldn't enable compcache. But if you do not want to partition your SD-card then compcache can be a good alternative.
Read more about how Compcache works here: http://wiki.cyanogenmod.com/index.php?title=Compcache
Enable compcache
In a terminal or using an adb shell type this:
$ su
# compcache.sh enable
Type free to confirm you now have 32Mb swap
Disable compcache
In a terminal or using an adb shell type this:
$ su
# compcache.sh disable
Type free to confirm you now have 0Mb swap
Advanced users
Compcache size, settings and swappiness is setup in /system/bin/compcache.sh
If you are an advanced user, you'll know how to proceed from here...
Some questions before putting this on, since I'm always a noob with installing new ROMs...
1) Is this in a stable and smooth stage yet (with everything working properly) or is this still in developmental stages? What is the difference between this and cas_xp's?
2) I'm currently running The Celestial Teapot at 652mhz, will this be noticeably slower considering it doesn't have overclock (does it?). What's the deal in regards to overclocking?
3) I can install this fine (flashing it) over Kalt Kaffe's TCT ROM (replacing it with this one) or do I have to somehow get TCT off first?
Forgive me if my questions are nooby, I always prefer to overask (woohoo new word) in regards to ROMs
Whatever the case, thanks for working on this! Awesome (really) if it works perfectly, but even if not, I like seeing any development with U8100.
Unfortunately, it won't boot on huawei u8110.
I've tried to delete data/fatory reset, but it didn't help.
syrenz said:
Some questions before putting this on, since I'm always a noob with installing new ROMs...
1) Is this in a stable and smooth stage yet (with everything working properly) or is this still in developmental stages? What is the difference between this and cas_xp's?
2) I'm currently running The Celestial Teapot at 652mhz, will this be noticeably slower considering it doesn't have overclock (does it?). What's the deal in regards to overclocking?
3) I can install this fine (flashing it) over Kalt Kaffe's TCT ROM (replacing it with this one) or do I have to somehow get TCT off first?
Forgive me if my questions are nooby, I always prefer to overask (woohoo new word) in regards to ROMs
Whatever the case, thanks for working on this! Awesome (really) if it works perfectly, but even if not, I like seeing any development with U8100.
Click to expand...
Click to collapse
1)This is @cas_xp's but modded.
2)I haven't tested yet. But the previous version wasn't as laggy. I'm going to try to bring OC in. To reduce lag.
3) You should probably wipe before coming to this ROM . I should probably put a short flashing guide in.
atomicr said:
Unfortunately, it won't boot on huawei u8110.
I've tried to delete data/fatory reset, but it didn't help.
Click to expand...
Click to collapse
It will take a long time to boot for the first time. It is deodexed.
I left it for 5 minutes to boot. Do I have to wait longer?
OK. I'll try one more time.
edit:
No, rom doesn't boot neither after 10 minutes. It is stuck on my Movistar initial splash screen.
tahahawa said:
1)This is @cas_xp's but modded.
2)I haven't tested yet. But the previous version wasn't as laggy. I'm going to try to bring OC in. To reduce lag.
3) You should probably wipe before coming to this ROM . I should probably put a short flashing guide in.
Click to expand...
Click to collapse
So I will finally, after so long, have working 2.2 on my phone
Can't wait to try this...
atomicr said:
I left it for 5 minutes to boot. Do I have to wait longer?
OK. I'll try one more time.
edit:
No, rom doesn't boot neither after 10 minutes. It is stuck on my Movistar initial splash screen.
Click to expand...
Click to collapse
Too bad. I'm sorry it doesn't work. I haven't tested this myself, so I can't tell you if it is working or not. Thank you for testing.
works on u8150?
tahahawa said:
Too bad. I'm sorry it doesn't work. I haven't tested this myself, so I can't tell you if it is working or not. Thank you for testing.
Click to expand...
Click to collapse
Does this mean you haven't tested the rom at all and don't know if it works or merely that you haven't tested on the U8110 but have tested it on the U8100 only?
I assume the latter, but I'd rather double check
hachoo said:
works on u8150?
Click to expand...
Click to collapse
syrenz said:
Does this mean you haven't tested the rom at all and don't know if it works or merely that you haven't tested on the U8110 but have tested it on the U8100 only?
I assume the latter, but I'd rather double check
Click to expand...
Click to collapse
@hachoo no
@syrenz I haven't tested it AT ALL. I don't have access to my phone at the moment. When I do I will test it.
Does the problem about wifi existing on cas_xp's ROM still exists?
I mean, automatical rebooting when stopping wifi..
jack1245 said:
Does the problem about wifi existing on cas_xp's ROM still exists?
I mean, automatical rebooting when stopping wifi..
Click to expand...
Click to collapse
Any bugs in his ROM should also be in here. If and when I correct them I will post.
Yeah current bugs are: wifi on reboot bug, laggy rom,d-pad click, calibration, its a pain, but overall nice try tahahawa i think once you can test by yourself you will improve it a lot.
cyberghoser1 said:
tahahawa i think once you can test by yourself you will improve it a lot.
Click to expand...
Click to collapse
Agree.. and I will be waiting for that..!
Thank you for your effort tahahawa
DISCONTINUED
Official Update Modified
OUM GME
Hacks, Scripts and Kernel will Spice up your latest update.
Choose this ROM if you have used the components before and want them in your phone just after one flash
Samsung Indian Update DDJP4
Fugumod 2.4 Beta 3 (800Mhz)
Root
deodexed app and framework
Busybox 1.18.4
JIT
Live Wallpapers
Malware Patch
5 Lockscreen Mod
Powermenu Mod
Gingerbread CKVed 0.9 [for Powermenu and lockscreen mod] (clarkkov)
Bootanimation
app2sd (kyrillos13)
Flash with Odin as "One Package" (should boot before odin timer stops)*
No stock browser bug
Download link: http://www.multiupload.com/F9JQSU6H82
OUM CE
Bare Minimum Rom
Choose this ROM instead of stock ROM (you get Stock ROM with minimum things)
Samsung Indian Update DDJP4
Root
Busybox 1.18.4
Live Wallpapers
Malware Patch
Flash with Odin as "One Package" (should boot before odin timer stops)*
Download link: Do you want me to upload such minimum thing? Suggest in comments
Note: I am not a developer. I am just a user.
Screenshots
Attached Screenshots
Steps to flash the rom is straight forward
Load appropriate apollo_0531.ops file in odin and flash the .tar as "one package"
This will get the rom working
There are 2 things that fugumod does
1 /etc/init.d scripts start
2 Filesystems are recognized
Best way to I do is
When i am on Stock kernel I delete all files from /sdcard/Android/data/fugumod/
and keep fs.convert with lines
---------------------
mmcblk0p2 ext4
stl6 ext2
stl7 ext4
stl8 ext2
---------------------
boot in recovery and do factory reset and delete cache
Flash fugumod
and wait for ages so the fs gets converted
If you dont want to wait..
dont keep any files in fugumod directory when on stock kernel and rest remains same
i.e factory reset and flash fugumod
for a quick workaround if you get stuck after fugumod flash
remove sdcard
Do data/cache wipe and factory reset from recovery
and boot.. you'll get in os faster..
once the phone is on insert sdcard and wait for it to get mounted
delete all files from fugumod directory and reboot
Initially fugumod is super slow because it has to convert fs load scripts and cpu is not scaled properly.
once the fs is fine, converted and recorded in fs.current the init scripts (apps2sd) are also cool with everything
then when you see the interface its very slow because of inappropriate cpu speeds (use set cpu to set settings of your choice)
There is a also a zipalign script which will run for first time and take time to make itself comfortable
Nice...
Good work! Nice to see new Devs popping up!
revant said:
for a quick workaround
remove sdcard
Do data/cache wipe and factory reset from recovery
and boot.. you'll get in os faster..
once the phone is on insert sdcard and wait for it to get mounted
delete all files from fugumod directory and reboot
Initially fugumod is super slow because it has to convert fs load scripts and cpu is not scaled properly.
once the fs is fine, converted and recorded in fs.current the init scripts (apps2sd) are also cool with everything
then when you see the interface its very slow because of inappropriate cpu speeds (use set cpu to set settings of your choice)
Click to expand...
Click to collapse
hi
thanks but i need to say something went wrong
because i went back to ddjp4 rooted it added fungumod & did the apps2sd scripts and all this did not take all the time it took while i flashed fungu after ur rom it took like 8 mins & it was stuck on the android boot
i had no problem flashing ur rom that went well
only after the fungu flashing part is when i got stuk. well ill try the some again latter
Note : ill remove my two post to give u continuity ok
nice...... can i have the stock framework..... the odexed one...... cause it's not out on samfirmware...... thanks
anant.0097 said:
nice...... can i have the stock framework..... the odexed one...... cause it's not out on samfirmware...... thanks
Click to expand...
Click to collapse
http://www.multiupload.com/NVKDM4DCK7
revant said:
http://www.multiupload.com/NVKDM4DCK7
Click to expand...
Click to collapse
damn that was fast!!....... you had already uploaded the stock earlier or just uploaded?
anant.0097 said:
damn that was fast!!....... you had already uploaded the stock earlier or just uploaded?
Click to expand...
Click to collapse
There was already a post
http://forum.xda-developers.com/showthread.php?t=1126250
revant said:
There was already a post
http://forum.xda-developers.com/showthread.php?t=1126250
Click to expand...
Click to collapse
Ah!........
Finally on an Indian firmware....just a quick queston- is it only me or everyone's having the packet data problem in other regions firmwares and custom ROMS ??
-->my point is i'm able to connect to GPRS/3G only on Asian firmwares :/
niteshtak said:
Finally on an Indian firmware....just a quick queston- is it only me or everyone's having the packet data problem in other regions firmwares and custom ROMS ??
-->my point is i'm able to connect to GPRS/3G only on Asian firmwares :/
Click to expand...
Click to collapse
hi
its only u see i have flashed all the roms available here stok and custom roms i have never had this problem u are facing
but many stok & custom roms(most recent custom do have it) dont have apn so next time chek if ur apn is set and do the needful reg the same
haree said:
hi
its only u see i have flashed all the roms available here stok and custom roms i have never had this problem u are facing
but many stok & custom roms(most recent custom do have it) dont have apn so next time chek if ur apn is set and do the needful reg the same
Click to expand...
Click to collapse
Yes i did that...copied the global apn.conf file >> then restarted >> then set the default APN settings..but got no results !!
I guess it's because of my service provider..
niteshtak said:
Finally on an Indian firmware....just a quick queston- is it only me or everyone's having the packet data problem in other regions firmwares and custom ROMS ??
-->my point is i'm able to connect to GPRS/3G only on Asian firmwares :/
Click to expand...
Click to collapse
Go to /system/etc and copy apns-conf.xml
and use this file on all Roms
or use an app called apns backup restore
clarkkov said:
Looks cool!
Did not try it but I like it.
Sent from cramped soft keyboard!
Click to expand...
Click to collapse
Once again, Thanks for the theme Its beautiful!
The package have a bootloader ?
Darius_AWS said:
The package have a bootloader ?
Click to expand...
Click to collapse
hi
nooooooooo
your rom is fast and the theme is AWESOME ! :O
EDIT: no CWM recovery
First of all... Thanks Chainfire!!!! This is totally based on your work.... i made only some MOD....
Ok, the work is quite finished... the CF-ROOT for I9003 is ready!
I called this "beta version" (since i need your tests/opinions) but all might work.
IMPORTANT: This is only for KPH Firmware!!!
You can flash this over any other CWM or over the stock FW.
Many people will ask "Why i have to install this?"... because with this your phone will have:
- Root ( don't need to use SOC or any ZIP);
- Busybox 1.17.2;
- Sqlite3 v3.7.2;
- init.d support (you can put in the folder /system/etc/init.d all the script that you want to be loaded at the startup);
- New fixed CWM ( unyaffs issue has been fixed - offline charge fixed - USB storage mode while in CWM fixed);
- Add EXT4 support to the phone ( so you can convert the filesystem to ext4 to improve performance);
- full working CWM Manager (backup - restore - delete backup - install apk - flash update.zip - flash kernel - reboot to CWM);
- Tweaks Manager with various tweak ( Ram Min Free - SD Speed - I/O Scheduler - Kernel Scheduler - CPU Conservative Governor - Swappiness - Ram Script by Juwe11 - Media Stagefright)---> Many people asked for Juwe Ram Script ---> to enable it completely choose in the Tweaks Manager: Ram Script - Ram Min Free and Swappiness;
- Auto ZIP-Align on boot - You can choose it in the tweaks app(NEW)
- Reviewed tweaks values (some from darky's rom some from hardcore some from other post in XDA)( thanks to bigeyes0x0 and Misledz )(NEW)
- Custom Boot-Animation support (place your custom bootanimation in /system/media/ and call it sanim.zip)(NEW)
To do:
- other tweaks suggested by you...
- whatever can be added.
Let me know what you think
HERE you can find the original post.
HOW TO INSTALL:
1- Flash with Odin the .tar file
or...if you went from a previous version of CF-ROOT
2- Download the .zip file into the external SD the open CWM Manager --> flash Kernel --> select the file you have just downoaded
IMPORTANT:
If you cannot find the two apps on your app drawer maybe you haven't space left on /system so delete some unused apps like aldiko, delere /system/cfroot folder and reboot
IMPORTANT/2: after the flash the phone might take some time to boot. You might think that it freeze on Samsung Logo but it's normal cause the auto-zipalign proc need some time. Just Wait.
UPDATE: Added CF-ROOT with my custom kernel. This have Ext4 inside the kernel (no modules) and OC to 1.1 Ghz. I think that it is secure. I haven't test it very well so please report me the issues you will find.
!
Version 05.09.2011 Changelog:
- added Graphics Boost Tweak (thanks Gana)
- added acid tweaks (thanks to the people that worked on it .. specially Bigeyes0x0);
- reviewed 00tweaks file by Bigeyes0x0;
To disable journaling on ext4 partition apply the attached journaloff.zip in CWM (Not CWM Manager app - it must be fixed).
There're two version of the CF-ROOT, the version with **CWM_Manager** can be flashed with CWM Manager App (select flash kernel) the other with odin (like always)
UPDATE 20.10.2011:
CF-ROOT for XXKPM can be found HERE:
- Standard Version --> http://www.multiupload.com/S463K75UED
- Surprise version ( i suggest you this) --> http://www.multiupload.com/G20L6PL5WC
What's new ?
- I finally finished the custom bootanimation support.... now works like he have to works. Just copy your bootanimation into /system/media and rename it to sanim.zip.... i think that here you can find what you need http://forum.xda-developers.com/showthread.php?p=17322814#post17322814
IMPORTANT!!!
If you have installed the beta version you must know that the ext4 conversion for that doesn't work properly. Ok, system, cache and dbdata will be on ext4 but data not. This because the init binary check on boot if /data have rfs FS and, if not, it format the partition wiping all your data.
In the new version i modified the init binary so it cannot do it more
I must say that i became mad to discover this damn thing !
A few questions: Are you using the latest fixed version of CWM? Also you mentioned that you would be releasing another update soon regarding the Nandroid backup image corruption issue. Is it in this release?
Also: Is this an alternative to ROM manager, apart from the inclusion of the tweaker tool?
Regarding the enhancements, could you please elaborate on some of them and what is safe/not safe to use (particularly in the tweaks and what they do)?
What I understood, after looking over all the posts, was that you optimized the CF-Root by chainfire for the i9003, by using a compatible Root, CWM, and adding an ext4 kernel? Are you going to port the ext4 converter tool as well? Will we be able to use an external SD card with ext4 formatting (Could be used to store files larger than 4GB)?
Sorry about the ton of questions. Trying to learn, and what better way to learn than from the best!
I'm going to take it out for a test drive now on XXKPE with ext4! Will report back later!
Thanks for your valuable work, I'm a huge fan!!!
Cheers
Update: Confirming that the passive charging bug has been fixed! Thanks Skin1980!
I cannot find the CWM or Tweaks icons in the app drawer as indicated in your screenshots. I can access CWM recovery mode using the 3 button combo though.
I had installed the last version of CWM by Amit and formatted with ext4 and I just used ODIN to flash over that install. I tried flashing again, still not appearing in app drawer. Any solutions?
Great job skin.. Hoping for the early release of a stable one.. Will test it later
Sent from my GT-I9003 using XDA Premium App
it's great...>.<
Auguri! Ok wow, This is pure genius . I've always been wondering what our CWM were based off. I guess using this would fix most issues people get when flashing CWM, since it's based off the original firmware
Also I'm loving the tweaks, they seem to make the phone more smooth, Although I've seen a few bugs after applying this I can't seem to use the V6 charger script anymore I get an error, will be posting one shortly. There are some minor hiccups in between and I tend to get FC on some apps when I multitask.
Edit: Turns out It's busybox related, no shell access. I've tried launching Busybox by Stericsons to check and It says no root access was given and boots me out.
i happy that u r belong to this community
Is there any recovery module or tweak available, in which we can handle basic file operation like copy, move from sd card to system or any thing similar?
Erahgon said:
A few questions: Are you using the latest fixed version of CWM? Also you mentioned that you would be releasing another update soon regarding the Nandroid backup image corruption issue. Is it in this release?
Also: Is this an alternative to ROM manager, apart from the inclusion of the tweaker tool?
Regarding the enhancements, could you please elaborate on some of them and what is safe/not safe to use (particularly in the tweaks and what they do)?
What I understood, after looking over all the posts, was that you optimized the CF-Root by chainfire for the i9003, by using a compatible Root, CWM, and adding an ext4 kernel? Are you going to port the ext4 converter tool as well? Will we be able to use an external SD card with ext4 formatting (Could be used to store files larger than 4GB)?
Sorry about the ton of questions. Trying to learn, and what better way to learn than from the best!
I'm going to take it out for a test drive now on XXKPE with ext4! Will report back later!
Thanks for your valuable work, I'm a huge fan!!!
Cheers
Update: Confirming that the passive charging bug has been fixed! Thanks Skin1980!
I cannot find the CWM or Tweaks icons in the app drawer as indicated in your screenshots. I can access CWM recovery mode using the 3 button combo though.
I had installed the last version of CWM by Amit and formatted with ext4 and I just used ODIN to flash over that install. I tried flashing again, still not appearing in app drawer. Any solutions?
Click to expand...
Click to collapse
1- The CWM used is always the last... if i'll update the CWM i'll update the CF-ROOT;
2- The CWM fixed reguard nandroid backup is under test;
3- My CWM isn't ROM Manager compatible... with the CWM Manager from Chainfire you can do a lot of things without going into CWM
4 - to convert in EXT4 just follow the guide on the other thread;
5- Not sure if you can format in XT4 your external_sd... try ;
6- The tweak are all sure... now i haven't time to exlplain better... some don't work.... some other work.
7- If the icon don't appear in app drawer try to check into system/app if the two files are there... if not try to remove /system/cfroot folder and reboot. Maybe your system folder is full so you can install they manually, the original apk are inside /res/misc/ folder.
8- bye
for me wifi not working obtaining ip address,gps not lock can i flas normel bootimg.ur work is awesome thx
bala242 said:
for me wifi not working obtaining ip address,gps not lock can i flas normel bootimg.ur work is awesome thx
Click to expand...
Click to collapse
I'm sorry.. for me everything is working...Before my CF-ROOT all works?
ur a superhero man!!
great ;-)
Skin1980 said:
I'm sorry.. for me everything is working...Before my CF-ROOT all works?
Click to expand...
Click to collapse
ya everything work before,can i reflas ur ver cwm?any body get this error?
Is there any tweak for increasing the 2g speed ??
or getting 3g speed in 2g plans...
I need this very badly...
I am not getting exact idea that what exact cf root does??? Or how cf root is so special...?? Will this make our work easy to do changes in kernal (that would be great)...???
Please can anybody in simple language....!!!
anigr88 said:
Is there any tweak for increasing the 2g speed ??
or getting 3g speed in 2g plans...
I need this very badly...
Click to expand...
Click to collapse
What your asking for is impossible.
Update!
The problem I had turned out to be due to the lack of space in the "/system" folder - as you had predicted Skin1980! Once I deleted some unnecessary software, I was up and running fully within minutes!
The phone works great! The fixes are really good! Having no issues except for one so far. I can't seem to mound "sdcard" in CWM recovery mode and cannot do a restore, for the same reason, from the CF-ROOT menu.
I have a feeling it's something I did wrong earlier, so I'll reflash completely and try again ('cause I have a lotta time on my hands atm and I want the bestest possible phone I can get).
Note: This doesn't seem to be compatible with DDKB2. Assuming that this is mainly for GB firmwares? Can someone corroborate this?
As usual, thanks!
Erahgon said:
The problem I had turned out to be due to the lack of space in the "/system" folder - as you had predicted Skin1980! Once I deleted some unnecessary software, I was up and running fully within minutes!
The phone works great! The fixes are really good! Having no issues except for one so far. I can't seem to mound "sdcard" in CWM recovery mode and cannot do a restore, for the same reason, from the CF-ROOT menu.
I have a feeling it's something I did wrong earlier, so I'll reflash completely and try again ('cause I have a lotta time on my hands atm and I want the bestest possible phone I can get).
Note: This doesn't seem to be compatible with DDKB2. Assuming that this is mainly for GB firmwares? Can someone corroborate this?
As usual, thanks!
Click to expand...
Click to collapse
after a whole day of using it. The phone will tend to lag and build up after a while. You'll notice the phone becomes slow again. I don't know what's going on.
Misledz said:
What your asking for is impossible.
Click to expand...
Click to collapse
I just want a small boost in the speed ....
Misledz said:
after a whole day of using it. The phone will tend to lag and build up after a while. You'll notice the phone becomes slow again. I don't know what's going on.
Click to expand...
Click to collapse
I did notice that initially it was fast. But as I kept it going through the day to recalibrate the battery, it did slow down and start to lag. I thought it was something to do with that. Also I felt that I had done something wrong with the flashing.
Going to overhaul my phone completely: Format, re-partition, XXKPE install (flashing twice), flash fixed CWM from the other thread, root using SOP 2.1.1, install busybox requirements for deodexing (this failed for me the last few times), restore settings using Titanium Backup, Nandroid backup, ext4 this baby, restore, and then install CF-ROOT to monitor.
Wish me luck! See you guys on the other side... again!
anigr88 said:
I just want a small boost in the speed ....
Click to expand...
Click to collapse
You've got the wrong thread mate!
Your bandwidth is capped by you operator and is dependent on how much they allocate you. On top of that 2G is physically limited to certain speeds which, usually, cannot be surpassed by legal means, and the illegal ones give you too less of a boost vs complications and errors to even bother about (I mean big ass hardware)!
I Welcome to the first custom ROM for the note 5 it is light fast with great battery life and a few minor modifications in due time I will add things I appreciate you for coming and trying out my work.. You can flash whatever kernel you enjoy the best. as I see everyone has different preferences.
2 versions.so please mind the instructions for each
You can choose between stock deodex or live on the edge and go with ThrashRom lite.. Your choice... Happy flashing.
The old AOGE downloads will be at the bottom if you need.
Developers-I do not mind if you use this as a base just please give credit.
9-11-2015 THRASHROM 3.4 clean flash
https://www.androidfilehost.com/?fid=24052804347813339
9-8-2015 ThrashRom 2.4 https://www.androidfilehost.com/?fid=24052804347811318
Boh6 modem- https://www.androidfilehost.com/?fid=24052804347812657
BOH4 modem only if you need - https://www.androidfilehost.com/?fid=24052804347809079
Arter kernel http://forum.xda-developers.com/showthread.php?t=3189907
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Features for lite
-rooted
-deodexed
-busybox
-3minit battery mod
-zip aligned
-over 200 fonts
-debloated
-private mode working
-SuperSU built in
-Knox removed
-boot sound removed
-international samsung boot animation
-ext read/write fix - thanks @TEKHD
-Netflix fix
-Removed volume warning
-block messages
-disable sms to mms threshold
-Removed Knox version in settings
-removed input method switcher in statusbar
-27 quick settings toggles
-5 way reboot thanks @foreverloco
-ram fix
-custom boot animation
-save restore messages
-enable camera during call
-increased volume throughout
Working V4A- http://forum.xda-developers.com/showthread.php?p=62783064
-more I'll post later when I get home
donations are not required or expected but if you feel like it.. It will give me more red bull to motivate me! ... paypal.me/JThrasher47
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Instructions - erase all registered fingerprints!BEFORE FLASHING! After you can put back in.
For THRASHROM LITE
Boot into recovery (TWRP OR PHILZ) NOT FLASHFIRE
-1. Make a backup
2. Perform a full wipe
3. Flash rom
( I recommend arter kernel but that is optional)
4.flash xposed (optional)
5.reboot. sometimes can take up to 10 minutes to boot first time.
6.thanks button goes a long way.
Uodated 3minit https://www.androidfilehost.com/?fid=24052804347810304
If you do not like 3 minit remove it with this-https://www.androidfilehost.com/?fid=24052804347809789
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ADD ONS-
Custom boot animation push to system /media and fix permissions
https://mega.nz/#!zN1ARSBA!3IOtVjsJbZH_f-Mz-v3cZ6BkioSThWNynIlsQjrvPas
-3minit for BOH4 ONLY - https://www.androidfilehost.com/?fid=24052804347810304 THANKS @foreverloco
3minit battery mod for AOGE ONLY https://www.androidfilehost.com/?fid=24052804347802688
Xposed framework-http://forum.xda-developers.com/xpo...samsung-lollipop-t3180960/page59#post62556222
noble kernel rebuild 2in case you have reboots with rebuild 3
https://www.androidfilehost.com/?fid=24052804347803877 @drbveb88 thanks for the link I lost lol
Xposed running great!
Old downloada-
Old V2-download- https://www.androidfilehost.com/?fid=24052804347803738
Still dirty flash and flash SuperSU
Old Debloated version- https://www.androidfilehost.com/?f...ww.androidfilehost.com/?fid=24052804347807578
ThrashRom Lite BOH4 with some mods- --please perform a full wipe on this one - https://www.androidfilehost.com/?fid=24052804347808630
list of apps removed--View attachment 3463572
Thanks to @Manh_IT for root and the kernel.
Thanks to @TEKHD for helping behind the scenes.
Thanks to @Chainfire for supersu
Thanks @-viperboy- for the updater script and all the help
Big Thanks to @markbencze for the banner!
Changelog:
V2- removed drive and lookout.. So you don't need to disable
Included kernel and su in rom
9-3-2015- Updated to new base
9-7-2015-removed volume warning
-removed input method switcher
-call/message block In settings
-Netflix fix
-removed Knox version in settings
-removed 3 minit.. Optional to flash
-disable sms to MMS threshhold
9-8-2015- added 27 toggles at boot
fixed private mode
Thanks to @daxgirl and @foreverloco for pointing me in the right direction
9-11-2015
-updated to boh6
-custom boot animation
-ram fix
-5 way reboot thanks @ foreverloco b/c I was being lazy
Thanks for getting things rolling!
dandroid7 said:
Thanks for getting things rolling!
Click to expand...
Click to collapse
No worries.. I'm just as ready as everyone else.. Too bad I don't have kernel knowledge
Misterjunky said:
I found this N920T (note 5) STOCK kernel posted in this forum earlier today but
forgot who posted the link. It's an Odin flash TAR file, perhaps you can use it.
Here is the download link in case you can use it:
https://www.androidfilehost.com/?fid=24052804347800814
Good luck,
Have a great day!
Click to expand...
Click to collapse
Thanks but no stock kernel will not work unless it has been modified.. There's a reason I left it out lol
Misterjunky said:
I found this N920T (note 5) STOCK kernel posted in this forum earlier today but
forgot who posted the link. It's an Odin flash TAR file, perhaps you can use it.
Here is the download link in case you can use it:
https://www.androidfilehost.com/?fid=24052804347800814
Good luck,
Have a great day!
Click to expand...
Click to collapse
I posted that earlier and that is not the stock kernel that is the stock recovery you should give credit where credit's due man not upload that to your own file host..
re: ok
jthrasher47 said:
I posted that earlier and that is not the stock kernel that is the stock recovery you should give credit where credit's due man not upload that to your own file host..
Click to expand...
Click to collapse
I just edited my post and also removed it from the file hosting.
Thanks for letting me know!
Have great day!
Misterjunky said:
I just edited my post and also removed it from the file hosting.
Thanks for letting me know!
Have great day!
Click to expand...
Click to collapse
I will put together a stock boot tar.. And if you send me one for your device I will put together one for your device too. But it's just not cool to take peoples stuff they put together for the community and upload to your host and share it around..
No harm no foul..
Will that stock boot tar be compatible with my s6 edge+ too?
Perhaps since the Note 5 and the s6 edge+ are almost identical
the roms, recovery and the kernel might be interchangeable. ..
Maybe that's just a lot of wishful thinking on my part.
Have a great day, and good luck with the rom.
Sent from my SM-G928T using Tapatalk
Misterjunky said:
Will that stock boot tar be compatible with my s6 edge+ too?
Perhaps since the Note 5 and the s6 edge+ are almost identical
the roms, recovery and the kernel might be interchangeable. ..
Maybe that's just a lot of wishful thinking on my part.
Have a great day, and good luck with the rom.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I'm not sure. If it has any similarities to the s6 and s6 edge then it might boot but stiff gets broke like screen gets twisted on x Axis and whatnot so I kind of doubt it.. But recovery I'm sure would be fine.
In the build.prop issues like the screen might be an easy fix by renaming
the model numbers or the versions.
To me it looks like the actual rom has parts in it for more than one phone
model and certain files like the build.prop tell the rom which parts to use
depending on the phone's model.
Or am I completely wrong?
Sent from my SM-G928T using Tapatalk
Misterjunky said:
In the build.prop issues like the screen might be an easy fix by renaming
the model numbers or the versions.
To me it looks like the actual rom has parts in it for more than one phone
model and certain files like the build.prop tell the rom which parts to use
depending on the phone's model.
Or am I completely wrong?
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Yeah I don't mean to sound rude but yea you're wrong the build.prop won't do anything if you make the changes I mean if you flash it and your axis gets inverted you just put in the dialer code *#2663# and press ftp firmware upgrade and it will fix it it..
The kernel modules is what tells it what to do
re: screen issue
jthrasher47 said:
Yeah I don't mean to sound rude but yea you're wrong the build.prop won't do anything if you make the changes I mean if you flash it and your axis gets inverted you just put in the dialer code *#2663# and press ftp firmware upgrade and it will fix it it..
The kernel modules is what tells it what to do
Click to expand...
Click to collapse
Yea, I know about that *#2663#, it saved my bacon when my touchscreen on my
Note 4 went crazy, it was the right resolution and size but none of the touches
corresponded with what was on the screen, however the s-pen did work properly.
After punching in that code and doing the upgrade the phone worked perfectly.
Before finding that code I was about to flush the phone down the toilet. LOL
The problem was all my fault, I by error odin flashed the wrong version of twrp.
Zip failed to flash on my Note5. Restoring my backup, I'll get you the error log when I'm back in Android.
EDIT: Literally nothing helpful...
Code:
Installing '/sdcard/Deodexed-N920TUVU1AOGE.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Error flashing zip '/sdcard/Deodexed-N920TUVU1AOGE.zip'
Updating partition details...
Let me take a look inside the zip and see what's up.
EDIT2: Yeah, you don't have a META-INF folder. No updater-script or anything. No wonder this won't flash. You'll need to fix that before this will flash.
-viperboy- said:
Zip failed to flash on my Note5. Restoring my backup, I'll get you the error log when I'm back in Android.
EDIT: Literally nothing helpful...
Code:
Installing '/sdcard/Deodexed-N920TUVU1AOGE.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Error flashing zip '/sdcard/Deodexed-N920TUVU1AOGE.zip'
Updating partition details...
Let me take a look inside the zip and see what's up.
EDIT2: Yeah, you don't have a META-INF folder. No updater-script or anything. No wonder this won't flash. You'll need to fix that before this will flash.
Click to expand...
Click to collapse
It says the zip is uploading on the OP lol.. I had a bad connection at work and had to stop uploading I'm about to be back and I'm going to start uploading to flashable
jthrasher47 said:
It says the zip is uploading on the OP lol.. I had a bad connection at work and had to stop uploading I'm about to be back and I'm going to start uploading to flashable
Click to expand...
Click to collapse
The ROM I downloaded was complete, not corrupted. It's just missing essential files needed to flash the ROM.
What you're going to upload next, you've tested and it flashes? I can help you if you need.
EDIT: Oh, the link you put up was a system download lol gotcha, missed that part.
-viperboy- said:
The ROM I downloaded was complete, not corrupted. It's just missing essential files needed to flash the ROM.
What you're going to upload next, you've tested and it flashes? I can help you if you need.
Click to expand...
Click to collapse
That is not the ROM that you downloaded that is just the system files that I put there for anyone to use as a base if they need I have to run it through archikitchen to get the updater script unless you have one lying around that will flash on our phones lol
I'm just getting home so I'm about to start running that it should not be long
jthrasher47 said:
That is not the ROM that you downloaded that is just the system files that I put there for anyone to use as a base if they need I have to run it through archikitchen to get the updater script unless you have one lying around that will flash on our phones lol
I'm just getting home so I'm about to start running that it should not be long
Click to expand...
Click to collapse
Yeah, I missed that lol I quickly threw one into the system download, it just successfully flashed, but it's bootlooping after hitting the T-Mobile logo haha I'm at work, so I'll look at it later.
-viperboy- said:
Yeah, I missed that lol I quickly threw one into the system download, it just successfully flashed, but it's bootlooping after hitting the T-Mobile logo haha I'm at work, so I'll look at it later.
Click to expand...
Click to collapse
The lollipop updater scripts are different from jelly bean they have to find the block and mount it that's why I have to run it through the kitchen real fast I just threw this up there the other day for any better qualified people to use as a base.
Now that we have root I'm about to get the updater script and throw it in there and upload
jthrasher47 said:
The lollipop updater scripts are different from jelly bean they have to find the block and mount it that's why I have to run it through the kitchen real fast I just threw this up there the other day for any better qualified people to use as a base.
Now that we have root I'm about to get the updater script and throw it in there and upload
Click to expand...
Click to collapse
No, you can do something like this:
Code:
run_program("/sbin/mount", "-t", "auto", "/system");
and that'll work just fine.
I have a feeling mine bootlooped because of permissions or symlinks, but it wasn't booting far enough for me to get a logcat of it.
-viperboy- said:
No, you can do something like this:
Code:
run_program("/sbin/mount", "-t", "auto", "/system");
and that'll work just fine.
I have a feeling mine bootlooped because of exactly permissions or symlinks, but it wasn't booting far enough for me to get a logcat of it.
Click to expand...
Click to collapse
Exactly.. Archikitchen does all the sym links in the updater script.. I'll admit I'm not that skilled lol I can just build a simple ROM. It seems like you know what you're doing if you can help in any way that would be appreciated other than that the only way I know how to do it is through the kitchen