WiFi error with Thoughtlesskyle's Not So Super Froyo [RLS18] - Touch Cruise Android Development

Hi
I managed to install the above using Atools, then copied the update files to Andboot and when booting held the volume switch up and selected upgrade, but still no wifi.
My system info is as follows
Kernel 2.6.25.99a3b07 [email protected] #5034
build full_vogue_userdebub2.2.1 FRG83eng.dcb.2010202.221724 test_keys
Any help ?
Thanks
Robert

use my latest kernel and the wifi update

sorry but still no wifi, re-downloaded Thoughtlesskyle's Not So Super Froyo [RLS18] then 2.6.32_VOGUIMG-320-FROYO-11-29-10 which i renamed to POLAIMG and the update from your link, but still have the following
Kernel 2.6.25.99a3b07 [email protected] #5034
build full_vogue_userdebub2.2.1 FRG83eng.dcb.2010202.221724 test_keys
Also i have tried all the radios mentioned on the polaris wm page with the same result.
So create Andboot and put in the android and update files and in the root of the card put in the above POLAIMG and boot.
Everything works fine and is stable except for the wifi and the kernal showing 2.6.25 instead of 2.6.32
Any help ?
Robert

Probably you didn't flash the phone....

Thanks all
Just an update reflashed with the original rom then retried the install and everything works
Robert

Related

Easy Update ?

Hello all,
I've been using android for a while now, running haret, and I get more and more convinced to remove my Windows Mobile to flash android on the NAND.
I'm daily looking at the froyo for vogue thread, but before flashing, I have some question in order to good understand :
- the current froyo thread has about 1 new release per day, how do you guys update the rom without loosing all your parameters and apps ? Or do you reinstall and re-set everything ? I don't want to do this every day ...
- will there be a tutorial, or can somebody put me here some explanations, to install froyo to nan. Cause I don't get everything with the nbh, the install ... what should got where, how to install, what is the utility, in what order to do everything ?
Thanks in advance.
For backup you can use titanium backup (now included in latest froyo) and you can simply follow superjvm guide.
Thanks l1qu1d, I think I'll try it this evening, since my current warm donnut is completly corrupted after trying to update google maps app ...
So, I will be forced to re-install everything ...
Do I also need to install the latest "radio" for the polaris.
And again, could someone just briefly explain me what is this nbh that dzo is alwais updating, I think it has a link with the zImage i'm using for haret, but I'm not sure ... I just would like to understand.
Th nbh file is the flashable version of kernel+bootloader+initrd. It's for nand install but it doesn't contain the whole sistem.

Screen does not respond while using Android

I have tried both Incubus26jc's Super Froyo (RLS8) and VaniljEclair RLS7c . I manage to install them in sd card (I want to use them via haret.exe) but when I reach the welcome screen where I have to touch the android to continue, the screen does not respond ( D-pad and center button work). Could someone help me? I decided to open a new thread because of what I have searched, I found only one member with a similar (but not the same) problem
The installation method I follow is this (mostly copied from a SuperJMN's post):
1º Run HaRET
2º From the installer, select Install System
3º Choose install update (if any)
4º Choose to fix permissions (if there had been an update)
5º Reset (don't select "Quit", just reset, this is to avoid problems)
6º Wait for Windows Mobile to start and run HaRET again.
Although I am flashing to nand and you are using haret/zimage, we may have the same problem with the unified touch screen driver that DZO implemented around 16 June. Is there is a way to use the kernel .nbh and system .tar with haret, rather than zimage? If so, you might try using an older kernel from before 16 June ... or perhaps an older zimage.
I have similar problem, if not the exactly the same. Using an older kernel seems to be a workaround of this problem. hxxp://forum.xda-developers.com/showpost.php?p=7041656&postcount=21 (You need to fix the hxxp as appropriate as I am not allowed to link URL yet)
i have the similar problem too, havent fixed it :/
I tried zImage-12-06-10 (the last one before the 16th of June) and installation procedure did not even start. But zImage-29-04-10 worked for me. However, Froyo is not that fast. If I change any files (zImage or something else) is it possible to have a speed improvement?
Same problems.
All Android realeases work on my pola100 only with zImage 29.04.10.
No work with other kernel.
I suggest to developers to analyse 29.04.10 and try to understand WHY this works and others no.
Regards.
regarding screen response, panel and changes on kernel module for touchscreen please see this post from dzo
also check this for solution from k_k
HTH
mensa07 said:
regarding screen response, panel and changes on kernel module for touchscreen please see this post from dzo
Click to expand...
Click to collapse
Those are the changes after which my touchscreen stopped working.
mensa07 said:
also check this for solution from k_k
Click to expand...
Click to collapse
It would be nice if this worked for the Polaris ... how would I change the value of this parameter before flashing the kernel? Thanks!
tmcfarland said:
Those are the changes after which my touchscreen stopped working.
It would be nice if this worked for the Polaris ... how would I change the value of this parameter before flashing the kernel? Thanks!
Click to expand...
Click to collapse
you can use terminal or adb to change the value
files for a fast android version
Could someone with a fast and stable version of eclair or froyo please tell us what files did he/she used to make that happen because I installed incubus froyo build and it is a bit slow? I am talking about installing it in my sd card and run it using haret.exe

How to flash latest android version on Polaris

For some reason I can't get my Polaris to run the latest Android version (i.e. Froyo).
1. Downloaded latest kernel (polaimg-panel3-320-froyo-07-07-10.nbh)
2. Downloaded last build (Incubus26Jc's Super FroYo RLS10)
3. Put last build (.tar or .tgz file) on SD card in directory /andboot
4. Flashed by using NBH file together with RUU Update Utility
Now it gets tricky:
a) or the system reboots, vibrates twice, I see a red and blue line and then a black screen and nothing;
b) or the system reboots, I get the Android installation menu after pressing middle button, install, but after soft reset I get a "No such file found" kind of system error
Can someone help me getting Android on my old Polaris? Thanks!
SnoopThaDoctor said:
For some reason I can't get my Polaris to run the latest Android version (i.e. Froyo).
1. Downloaded latest kernel (polaimg-panel3-320-froyo-07-07-10.nbh)
2. Downloaded last build (Incubus26Jc's Super FroYo RLS10)
3. Put last build (.tar or .tgz file) on SD card in directory /andboot
4. Flashed by using NBH file together with RUU Update Utility
Now it gets tricky:
a) or the system reboots, vibrates twice, I see a red and blue line and then a black screen and nothing;
b) or the system reboots, I get the Android installation menu after pressing middle button, install, but after soft reset I get a "No such file found" kind of system error
Can someone help me getting Android on my old Polaris? Thanks!
Click to expand...
Click to collapse
Same for me with polaimg-panel3-320, but it works great with polaimg-panel1-320-24-05-10.nbh
Thanks! Got it working with the older NBH file. Not completely flawless, but it works!
Don't use the old polaris panel 1 nbh, instead download the latest and then use this utility to change it to panel 1.
http://forum.xda-developers.com/showthread.php?t=689812
Thanks!!! Got it working with the latest NBH files! Great!!!
Hey, Could anybody unswer me on two questions.
1. why we have to change from panel3 to panel1 in this nbh file?
2. what is that mean panel3 or 1? why DZO do this type of the nbh (with panel3 i mean)?
thanks a lot, ithin it will helps not only me but everyone in future who didn't know about this modification
skydemon said:
Hey, Could anybody unswer me on two questions.
1. why we have to change from panel3 to panel1 in this nbh file?
2. what is that mean panel3 or 1? why DZO do this type of the nbh (with panel3 i mean)?
thanks a lot, ithin it will helps not only me but everyone in future who didn't know about this modification
Click to expand...
Click to collapse
The panel type depends on revision of your polaris, more specifically the make of the lcd panel, see here. I just tried every panel until I found one that works, I use panel 1.
Thanks a lot, but could you please answer me again. How i will know what kind of LCD panel in my Polaris and which number i should use?
these parameters is placed in my start-up file for the haret launcher
#alloctest 0x2000
set RAMSIZE 0x08000000
set MTYPE 1723
set KERNEL zImage
set initrd initrd.gz
set cmdline "board-htcpolaris.panel_type=1 pm.sleep_mode=1 mddi.width=240 mddi.height=320 no_console_suspend clock-7x00.mddi=0xa51 hw3d.version=1"
boot
can i use panel type from here?
i have opened this polaimg-panel3-320-froyo-07-07-10.nbh file in NBH editor and saw that the HW3D is set in Eclair. Should i change this to Froyo or left as is?
Thanks a lot for the conception)))
pannel type 1...
Did I brick my Polaris?
Well, it makes me laugh looking at the last post dated back July 2010 but I decide to post anyway because I feel somebody might have passed through my problems and might help.
Following indications on this forum:
1. I downloaded:
- Kernel: polaimg-panel3-240x320-2.6.32-froyo-09-09-10_21.nbh
- Last build: Incubus26Jc's Super FroYo RLS16 All Languages
2. Put last build (androidinstall.tgz) on SD card in directory /andboot
3. Used RUU Update Utility to flash the nbh file
Everything when smoothly. When it reboots, it vibrates, "Smart Mobility" message shows up, vibrates twice and then a blank screen is displayed.
Going through this forum I think I might have used the wrong type of panel and should have used Panel 1 instead of 3. So I downloaded Windows NBH Editor and managed to change the nbh into Panel 1. Then I shall try again.
This time my Windows 7 is unable to recognize my Polaris and all it can see is a new Disk Drive with no ADB device displayed. So I installed PdaNet302.exe to implement the USB driver for HTC Android Phone but it still cannot see my device and the process aborted.
What worries me is that one step of the process requested to change a setting on the Polaris (On your phone, click Settings > Applications > Development and make sure USB Debugging is on.). Obviously I can't do that as the screen is completely white!
I believe if I can manage to have my PC talking with my device then the problem will be fixed with the panel1-based flash. But every attempt to install the USB driver for Android Phone regularly fails on my PC.
All that time the Polaris remains with the lighted blank screen and there is no way to turn it off as the on/off switch refuses to work.
Shall I buy a new phone? Thanks for your help.
Did you try flashing the phone with a regular oficial HTC rom? just try it. Put the phone in the boot mode (press camera button and another one, dont recall which one) It will change to the tri color screen. Then connect it and try it.
Also there is a modified nbh rom which includes nothing, just the tool to recover your rom. Do a search to the forum.
I recently tried to install on my Polaris and it went really wrong. And finally could recover. The file is called ROMUpdateUtility_task29. I will erase everything on the phone but later you will be able to recover it
Form that point no more experiments. Polaris was made to work with Windows Mobile. It's really unstable, video camera is useless. And so on.
PC Carvalhon rom and I can use my phone as I want.
regards.
---------- Post added at 08:16 PM ---------- Previous post was at 07:57 PM ----------
With this you can recover your phone: http://forum.xda-developers.com/showpost.php?p=6227425&postcount=7160
A second life for my Polaris
Kafkacell,
1. Following your suggestions, I successfully started the bootloader (camera touch while reset), the 3-colour screen appeared, Windows 7 recognised the device. I then flashed the offcicial RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship and everything successfully completed. With enormous pleasure I see again my Polaris back to activity. Thanks for giving my Polaris a second life.
2. Back to Feb 2009, I flashed a pcarvalho eXtreme ROM. I don't recall any longer the version of this ROM but it was very stable and never ever crashed. Recently I downloaded and flashed most recent ROMs. From that moment on, I have no peace. It crashed 2, 3 times a week. Now I wish I could go back to the old version but couldn't find it. Perhaps pcarvalho removed them to save space? May I ask you which pcarvalho eXtreme ROM version do you currently run. Thanks.
Im currently running 29022 version (latest update from PCCarvalho).
Notes:
UPDATE:
29022 is up
this is a fix release...sound issues should be gone...had to remove htc volume control is it still has issues...fixes minor gfx glitches...updated to lastest and probably final leak version of wm6.5.3 (29022)...will from now on work on unresolved issues and finalize rom...this will still take some time due to work...
updated physics engine and utask app by ultrashot...my thanks to him...
patched htc album to novsync, faster scrolling once cache is made...
removed no longer supported apps (my phone and marketplace)...if u need them install via cab...
Here is the link for the rom: http://forum.xda-developers.com/showpost.php?p=15707730&postcount=8079
it was posted on July of this year, and so far it runs great. The trick is to not install a lot of apps in your main memory. Do it on your SD card. Also a hard reset is a must to avoid all kind of problems.
regards and glad you have your phone back to life

[ROM][Updated 10/02/11] Higgsy_Modded_3.4.2_GB_Froyo_RC2

Update 10/02/11:
For existing users of the ROM, flash the 2.2GB_NoCG_31_39.sbf (Link below). This will flash the rest of the ROM apart from the part that stops the ROM from being downgradable and system - Don't worry your ROM will be as it was before after flashing - you won't loose any data.
##CAN PEOPLE POST WHETHER THEY ARE HAVING GTALK/MARKET ISSUES PLEASE## Please also post if it is working ok for you
Back up after needing to sort out a few niggles and an issue with the rom including my Titanium backup license key. Now RC2.
Higgsy Modded 3.4.2 GB Froyo for Motorola Defy.
Fully working, no niggles ROM. Everything works. Its a blank canvas, All social networking blur stuff removed, some widgets, some other stuff.
Included:
Launcher Pro
Milestone Overclock
Titanium Backup
Widgetsoid2
Clockworkmod Recovery
Es File Explorer
Also:
Deodexed
Rooted/Busbox (Busybox installed in /system)
Over clock Script included with following freq/vsel 1000/52, 600/36, 300/26. (milestone overclock is not loaded as default - just go in and load module and set to apply on boot then forget about it)
Install process - this must be followed to the last letter - there is no variation so please don't ask.
If you have already followed the process to get onto a downgradable base, (i.e. you already flashed RC1, or, you followed the other thread Here then all you need to do is boot into clockworkmod, wipe data/cache and restore this. It will wipe everything again, sorry about that.
I never flashed a non downgradable .sbf before, such as 2.51 Eclair, or the GB/US Froyo, so can't vouch for whether it will work correctly on peoples devices that have done that, you should however just be able to flash the system/image if you've already got a 3.4.2 froyo base. If you have never either recieved the phone/flashed one of the undowngradable .sbfs, this process will ensure you keep you downgradibility.
Files Needed to complete This:
2.2 Chinese .sbf(Unzip the .sbf from the archive)
Higgsy_Modded_3.4.2_GB_Froyo_RC2 (Unzip and put folder in the sdcard/goapkrev/backup folder)
Superoneclick Root
Clockworkmod Recovery
2.2GB_NoGG_31_39.sbf(Unzip the .sbf from the archive)
1)Make a backup of all your apps with Titanium backup on your current ROM.
2)Boot into Stock recovery (Power On/Vol Down, then press bottom right hand corner of the screen when you see the warning sign) Then perform a data wipe.
3)Using RSD Lite flash the 2.2 Chinese ROM (Guide Here if you need it!)
4)Once the phone has rebooted, skip set up, root via superoneclick and then install clockworkmod recovery/apply.
5)Boot into Clockworkmod Recovery and wipe data/cache
6)Now got to backup/restore and restore the Higgsy_Modded_3.4.2_GB_Froyo.
6)Important! Once the restore is complete pull the battery, as you are reconnecting the battery hold volume up, so that it goes straight into bootloader.
7)Once in bootloader flash the 2.2GB_NoCG_31_39.sbf by RSD Lite
8)Once the above is completed it should reboot and you are done
PLEASE READ:
I don't recommend restoring settings via titanium backup, only apps/app data, in the past I have done this and found it problematic. I suggest to redo your settings manually.
If you want to use setvsel (as it now works fine with froyo) you need to remove the setscaling scripts I put in for overclock and also milestone overclock. Setscaling scripts are located: /system/xbin/setscaling.sh + /system/etc/install-recovery.sh
If you report a bug I need to know what roms /things you have flashed before, there are too many variables, most notably if you been on non downgradable roms
Enjoy!!!
Thanks go to:
Sorensiim - Hosting all my files
mcm_xyz - for the haptics fix
Bizzaboy - for info on updating media profiles, so improving video recording
Authors of all the apps included in here, donate or buy the full versions they are worth it!
Further updates I intend to release as update.zip's, looking at themes, bugfixes (even though there aren't any that I can find) etc etc...... Please don't pester me for these, I do it as a hobby and sometimes don't have time for days to do things.
Change log:
03/02/11
RC2 release
Removed my TI Backup license that I had inadvertently included
Removed various info from the data.img, that I believe could have been cuasing some of the niggly issues people were having.
01/02/11
RC1 Initial Release
fantastic work !!!! will try after i'm gone from work
+1 looking forward to trying after work today
how to edit the overclock script ?
my phone could run on [email protected] , [email protected], [email protected] , [email protected] very stable
008325 said:
how to edit the overclock script ?
my phone could run on [email protected] , [email protected], [email protected] , [email protected] very stable
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=880851
Hey higgsy, i didn't flash your ROM yet but i have a question
At the moment I have a Defy which is on 2.34, and I didn't upgrade yet because i NEED a downgradable ROM (for warranty reasons, the DE version is still at 2.21)
now thanks to your tutorial, i can upgrade to froyo while being able to downgrade to the official 2.21 if needed, but here's my question:
what happens if i nand restore a different ROM based on the 3.42 UK rom (like HandlerExploit's upcoming Vanilla version), will I still be able to downgrade?
(e.g. does restoring a backup WITHOUT flashing a new sbf make your device undowngradable?)
yozgatg said:
Hey higgsy, i didn't flash your ROM yet but i have a question
At the moment I have a Defy which is on 2.34, and I didn't upgrade yet because i NEED a downgradable ROM (for warranty reasons, the DE version is still at 2.21)
now thanks to your tutorial, i can upgrade to froyo while being able to downgrade to the official 2.21 if needed, but here's my question:
what happens if i nand restore a different ROM based on the 3.42 UK rom (like HandlerExploit's upcoming Vanilla version), will I still be able to downgrade?
(e.g. does restoring a backup WITHOUT flashing a new sbf make your device undowngradable?)
Click to expand...
Click to collapse
Its flashing the sbf what locks you out of being undowngradable. simply restoring a system and/or data partition should not cause an issue. Ask the authors of the other ROMs, I can't comment on what effect there releases will have on your phone.
could we have some screens?
fabianowerner said:
could we have some screens?
Click to expand...
Click to collapse
Screens are pointless mate, its a blank canvas there is no theming etc. the screens in my 2.2 CN thread are pretty much the same
Looks nice,
so far running very smooth every thing ive tested and works well as far as i can tell!!
although I cannot got into recovery just get a black screen
Overall very nice cheers!!
Duh! I just flashed the uk rom posted by iaio72. I just realize it is not deodexed and i *must* (must?) replace that statusbar. If i understand correctly, it is not possible to theme odexed roms, right? Do you think i can just flash your system image or may this raise some issues ?
Higgsy, first of all thanks you very much for this rom, but I have a "little" problem. With a clean nandroid and with your, I have problems with gmail notification and "google talk connection problem" (don't know how is exactly writen, I have in another language)
what can be?
Edit: Just say: "Google Talk failed to login. If this is a google Apps account, confirm that Chat service is enabled for this account."
add.thebad said:
I cannot got into recovery just get a black screen.
Click to expand...
Click to collapse
Just a blind guess: you did disable usb debugging before booting into recovery, right? This is mandatory for froyo (don't know why though).
Another, market is not the new.
Edit: Now is up to date, it just didn't want to update, or install app. Removed data and restarted. Somebody know something about the other issue?
If I already followed the safe upgrade to 3.4.2, it should be good enough to simply do a nandroid restore and flash devtree again, right? I so want to get rid of blur
Camera not working!
Everything run smooth but the camera is not working.
if i'm already on 2.51 (it came stock), how do I go about flashing this froyo release?
Can anyone help? thanks.
Hi, Thanks for the good work
I've the same problem with Talk, authentification problem...
I've another problem with the LED from camera doesn't work.
Any idea?
gratias mate, for your work.
I had the blur-UK ROM installed, so I was able to restore your system.img only. Non of my data got lost and it's running smooth on your deblured version

[ROM] (Flytouch 2, SuperPad, WWE10) 2.2 v2.1 #3925

Thanks to kiodo1981 for bringing this to us so quickly
Click to expand...
Click to collapse
THIS ROM MAKES THIS PAD ROCK NOW
For now its back to using IUW to do either one of the versions..
you will also need to have done a U-BOOT-NAND upgrade at some stage.. and need to be showing at least uboot - 0.6.1.5 (587) at bootup at the right hand bottom of our screen.. if you dont have this then you will need to do it..
1: Here's a new link by Smarkies that has a great pictural step by step flash guide
http://forum.xda-developers.com/showthread.php?t=1074251
2: This is the new Flashable via SDcard 2.2 v2.1 thanks to vihtor
Originally Posted by vihtor
Try this one: depositfiles.com/files/dqp3xdrcg
But i am not sure that this ROM compatible with all uboot's.
Click to expand...
Click to collapse
instructions.. thanks to Jiggity Janx
CONFIRMED #3925 2.2 v2.1 bootable sd install. One step process. Great job!
(for those wondering I have 6.1.5 (559) uboot so any at that or later should be allright)
EDIT: IF you have at least 6.1.5 (559[or higher]) showing on the Infotmic screen when booting you should be able to 1) download the .img file at the link above, 2) burn the .img file to an sd card using win32diskimager (or winhex), and 3) insert the sd card into slot between 2 usb ports while booting to update to 2.2 v2.1.
PS Not only does camera still work clearly for me on 559, camcorder records now.
Click to expand...
Click to collapse
3: Ramdisk work around
http://forum.xda-developers.com/showpost.php?p=13974529&postcount=58
read posts from about 55-58 on Smarkies, why it is a good idea to re-flash the ramdisk
other versions if you have no success with the one above....
here's a link to the files you need.. iuw1.1-english
http://www.fileserve.com/file/taD2UBA
plus instructions..
http://www.fileserve.com/file/6Hn9ytR
Use IUW to make a bootable sdcard.. this is first version.. still stable, it is posted for those that dont want to go straight in to flashing a unwrapped image file.. if you use the instructions you should be able to just dump/flash this to your usual bootable sdcard.. stick it in the top slot and it will upgrade to this version.. no usb needed.. (note.. you will still have needed to have upgraded your "u-boot" at some stage... read further down for this..
ROM 2.2 V1_8
http://www.b2cus.com/software/WWE10B_Android_2_2_V1_8_U0M_GT2005.rar
2ND VERSION -
Warning - be slow and sure about what you do here.. you can brick your pad if you burn the wrong files... you have been warned..read the other threads before you do anything.. and have the opened IUW instructions with the pictures if you are unsure...
1st use one of these...
uboot - 0.6.1.5 (587)
Originally Posted by l33tlinuxh4x0r My uboot - 0.6.1.5 (587) http://www.mediafire.com/?bv4ixzeq34q5bi7
Click to expand...
Click to collapse
confirmed working and Roots for me ---- But no Camera for me
or
Uboot - V 0.6.1.2(587)
thanks to veryjo http://www.android-hilfe.de/attachments/apad-gf-10-flytouch-2-forum/31799d1302373904-installationsanleitung-flytouchii-froyo-2-2-stragulus-u-boot-nand.zip.zip
Click to expand...
Click to collapse
Confirmed working, Roots and camera for me working
MAIN ROM FILES
Originally Posted by kiodo1981
2.2 v2.1 #3925 http://www.b2cus.com/software/flash10.1-android2.2.rar
Click to expand...
Click to collapse
Confirmed working and "ROOTED" yeha.
Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases..Urgently so we don't get too many bricked pads
ROOTING
Thanks to Barsuk..
Root with launcher pro only. Into launcher pro adding activity "Development" to desktop and use it then z4root.
Click to expand...
Click to collapse
or
Universal root - seems to work for me
Click to expand...
Click to collapse
Jogor said:
Working and rooted.
I installed #3656 first and skipped the UO file when installing this and everything worked great. I installed the newest UO 0.6.1.5 () too and root seems to work after that too.
What I really like with this release is that swedish language is included (was missing in all updates after 1623) and ofcourse that it's Froyo!
To get Titanium Backup to work you will have to copy your old TitaniumBackup folder from the SD card to the new created when you installed TitaniumBackup, after that TitaniumBackup will find all your backuped apps.
It seems like both Flytouch2 and Flytouch3 are at version #3925, maybe the are compiling new versions for both pads at the same time now, so we can count on a new version when Flytouch3 gets one?
Click to expand...
Click to collapse
NOTE: do not use the update software on the pad even through it says there is an update available.. it will take you back to firmware: 2.1-update1 V1.8#2752
kernel version : 2.6.32.9
reserved
reserved for more info
Bugs so far.. will update as the forum grows so that we have a reference page at the front.. saves a lot of reading later if this grows too much..
Please report your bugs and we can get people to work out fix's for you..
1: Ndrive does not work in this version
2: Small amount of people experience has Wifi connection/dropout problems - yet to find a fix..
Also no confirmed tests on Ethernet connections as yet - will confirm once we get some feed back - I am in Singapore airport and wasn't able to use the the Ethernet plugin for net.. so will check it out over the next few days as I will be in different Hotels so can test connections on the road
3: No apps2sd --- hope some one smarts finds a work around.. it would be killer if we could redirect some of the apps to see the SD1
A note on this...
in 2.2 V1.8 the file structure is sdcard local ram storage.... and ... SD1 - sdcard storage.. and SD2 -
in 2.2 V2.1 file structure is Local ram storage... and SDcard 1 and 2
both are locked in to using the local partitions for program storage and program data storage..
Which is a shame as things like ebooks and heavy graphic programs it would be nice to send the storage to SD1 or 2
This is fixed.. look at Smarkies thread for work around..http://forum.xda-developers.com/showthread.php?t=1074251
4: Synchronization contacts and google calendar - Mixed bag on this one.. some get it some don't...might be a cache thing..
Fix once again provided by Barsuk .. check posts from Capeschae and Barsuk for fix.. they are from posts 121 pg13 - 126 pg 13
5: Paid Market apps - This is because of the China location block from Google more on it http://forum.xda-developers.com/showthread.php?t=551929&page=3
there seems to be a fix thanks to Barsuk..
Problems with market. Not all applications are available. Workaround: clear data for Google Services Framwork then force stop it then reboot tablet.]
Click to expand...
Click to collapse
In this rom i see one bug. I am can't explore my SD card that content two partitions - Linux swap partition and FAT partition. After remove the swap partition, i can see the card in file manager.
I have to thank for this link www.b2cus.com/software isergio
vagros said:
In this rom i see one bug. I am can't explore my SD card that content two partitions - Linux swap partition and FAT partition. After remove the swap partition, i can see the card in file manager.
Click to expand...
Click to collapse
Yes..I had that problem too..as tried to set a cache Linux as well..had a God arwful time with it..I think it is something to do with how they have setup the drives for the internal ram on the pad..
Hopefully one of the guru's will grab this then work out how we can get real apps2sd..then we will be laughing..
Sent from my warm evo using XDA App
Originally Posted by kiodo1981
2.2 v2.1 #3925 http://www.b2cus.com/software/flash10.1-android2.2.rar
Click to expand...
Click to collapse
I installed this official Froyo too. It's very, very fast, more than all the different firmware tested from here!
Some remarks/questions:
- The camera is not working anymore, the preview screen shows green or sometime other colors...
- A lot of apps are pre-installed, meaning that it is impossible to update them (Dolphin Browser, Skype, Facebook etc...)
- Is it possible to install Flash Player on it? Will it work? Does anybody tried?
- Is it possible to overclock the Flytouch2 with this rom? Is the kernel overclockable?
Thanks,
Tuc
Tugdu77 said:
I installed this official Froyo too. It's very, very fast, more than all the different firmware tested from here!
Some remarks/questions:
- The camera is not working anymore, the preview screen shows green or sometime other colors...
- A lot of apps are pre-installed, meaning that it is impossible to update them (Dolphin Browser, Skype, Facebook etc...)
- Is it possible to install Flash Player on it? Will it work? Does anybody tried?
- Is it possible to overclock the Flytouch2 with this rom? Is the kernel overclockable?
Thanks,
Tuc
Click to expand...
Click to collapse
i can help for the camera-problem...
install after installing FW this Uo: http://www.android-hilfe.de/attachm...uchii-froyo-2-2-stragulus-u-boot-nand.zip.zip
now the camera works
how to install this update without usb cable?
more stable
Thank you very much for the firmware much more stable, it does not freeze as V4 and V5 when used continuously.
Help wifi
Hi,
I have installed this new firme and i have a problem with the wifi. You turn off continuously and lasts very little connected. I have configured with fixed ip and wpa encryption.
Does anyone know if there is any way to solve it?
Thank you and a greeting.
Thanks to Isergo
kiodo1981 said:
I have to thank for this link www.b2cus.com/software isergio
Click to expand...
Click to collapse
Yes, I would like to thank "Isergo" too for making this public..
A clean fast Rom forsure..
@veryjo - have you got a version number on this U-boot-nand?
Anyone else confirm it works before I flash it..
@patosoft
I am running Wifi with WPA/WPA2 PSK with Auto i.p.. no problems
been downloading and streaming with it..
@Asiaa -- use IUW to make a bootable SDcard for the 2.2 1_8 version
http://wwe10b_android_2_2_v1_8_u0m_gt2005.rar/
After installed 2.2 v2.1 #3925 I found two bugs
- The camera does not work properly. I fixed the camera by replacing u-boot-nand.bin. Currently I have version 0.6.1.2 (587)
- Failure to sync contacts and calendar.
Market and Google Maps in this version work properly.
dgcruzing said:
@veryjo - have you got a version number on this U-boot-nand?
Anyone else confirm it works before I flash it..
Click to expand...
Click to collapse
the Uo is version 0.6.1.2(587)
perhaps you have memories of the fw 2852. this fw had camera-problem too
not able to root
This verision is awesome, having problems rooting it, have tried z4root and universal android root also, anyone have a solution for this. also having problems with market, not showing alot of apps, mostly Chinese and no google navigation
I used UniversalAndroot-1.6.2-beta5. The first time did not work the second time worked.
Hello,
Thank you for answering me. It is true that by dhcp works perfectly, but prefer to solve the problem and leave it in static. Anyway with this solution, I better to work with the epad and already ire sought a way to fix it.
A greeting and thank you
After trying a few flash websites, I noticed that Flash Player is ON BOARD in this Froyo ROM!
But colors are something between colored and black&white...and crash in fullscreen mode.
The colors issue has been fixed on the new Flytouch (512Mb RAM) - the following quotation from Androidtablets.net explains how to proceed:
Flash Player issues RESOLVED - new flash player .apk
I have tested this on my ft2v2 with TCH rom 0419, and it mostly worked! Flash now played with correct colours and almost no lag once buffered. It did however crash when I attempted to go full screen, so not perfect yet. Opera mini and Maxthon Browser use the youtube app for youtube website if you have it installed. This works excelently. Flash worked well on other flash websites, I tried an emag site and it loaded where it would not before.
Here is the new apk: Adobe flash for flytouch3.rar (Thanks koti)
Password: koti
Install:
1) use Root Explorer to rename file \system\app\install-flash-player.apk to .old
2) Reboot Flytouch
3) Install the above .apk
I tried youtube and also some eMag sites.
NOTE: This is now included in Tim's ROMS 3b and 3c.
NJoy!
Last edited by Chandos; 05-02-2011 at 05:21 PM.
Click to expand...
Click to collapse
I tried to find the file \system\app\install-flash-player.apk but it doesn't exist in our 256Mb Flytouch...so I directly installed the new Flash Player from the link above but nothing changed with the Flash videos colors, even after a restart.
Does anyone know how to properly install this new version of Flash Player???!!!
Tuc
I rectified,
Still failing me the wifi. Automatically I hold a more function, but is still cutting. Before I had the firm 3245 and it worked fine. So I'm going to return to this firm.
"Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases.."
That would be good - waiting patiently
caravanman said:
"Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases.."
That would be good - waiting patiently
Click to expand...
Click to collapse
Try this one: depositfiles.com/files/dqp3xdrcg
But i am not sure that this ROM compatible with all uboot's.

Categories

Resources